[igt-dev] [PATCH i-g-t v2 1/2] tests/i915/kms_psr2_sf: Some cleanups after
Jouni Högander
jouni.hogander at intel.com
Fri Feb 3 07:58:05 UTC 2023
Handle setting output for pipe in prepare and remove separate setup_output.
Carry all test parameters in data structure
Cc: Jeevan B <jeevan.b at intel.com>
Cc: Swati Sharma <swati2.sharma at intel.com>
Signed-off-by: Jouni Högander <jouni.hogander at intel.com>
Reviewed-by: Jeevan B <jeevan.b at intel.com>
---
tests/i915/kms_psr2_sf.c | 145 ++++++++++++++++++---------------------
1 file changed, 68 insertions(+), 77 deletions(-)
diff --git a/tests/i915/kms_psr2_sf.c b/tests/i915/kms_psr2_sf.c
index cfde6cfc..078884ac 100644
--- a/tests/i915/kms_psr2_sf.c
+++ b/tests/i915/kms_psr2_sf.c
@@ -85,6 +85,7 @@ typedef struct {
cairo_t *cr;
uint32_t screen_changes;
int cur_x, cur_y;
+ enum pipe pipe;
} data_t;
static const char *op_str(enum operations op)
@@ -103,30 +104,10 @@ static const char *op_str(enum operations op)
return name[op];
}
-static void setup_output(data_t *data)
-{
- igt_display_t *display = &data->display;
- igt_output_t *output;
- enum pipe pipe;
-
- for_each_pipe_with_valid_output(display, pipe, output) {
- drmModeConnectorPtr c = output->config.connector;
-
- if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
- continue;
-
- igt_output_set_pipe(output, pipe);
- data->output = output;
- data->mode = igt_output_get_mode(output);
-
- return;
- }
-}
-
static void display_init(data_t *data)
{
igt_display_require(&data->display, data->drm_fd);
- setup_output(data);
+ igt_display_reset(&data->display);
}
static void display_fini(data_t *data)
@@ -237,11 +218,15 @@ static void plane_move_setup_square(data_t *data, igt_fb_t *fb, uint32_t h,
set_clip(&data->plane_move_clip, x, y, SQUARE_SIZE, SQUARE_SIZE);
}
-static void prepare(data_t *data, igt_output_t *output)
+static void prepare(data_t *data)
{
+ igt_output_t *output = data->output;
igt_plane_t *primary, *sprite = NULL, *cursor = NULL;
int fb_w, fb_h, x, y, view_w, view_h;
+ igt_output_set_pipe(output, data->pipe);
+ data->mode = igt_output_get_mode(output);
+
if (data->big_fb_test) {
fb_w = data->big_fb_width;
fb_h = data->big_fb_height;
@@ -808,8 +793,9 @@ static void run(data_t *data)
}
}
-static void cleanup(data_t *data, igt_output_t *output)
+static void cleanup(data_t *data)
{
+ igt_output_t *output = data->output;
igt_plane_t *primary;
igt_plane_t *sprite;
@@ -838,20 +824,13 @@ static void cleanup(data_t *data, igt_output_t *output)
igt_remove_fb(data->drm_fd, &data->fb_test);
}
-static int check_psr2_support(data_t *data, enum pipe pipe)
+static int check_psr2_support(data_t *data)
{
int status;
- igt_output_t *output;
- igt_display_t *display = &data->display;
-
- igt_display_reset(display);
- output = data->output;
- igt_output_set_pipe(output, pipe);
-
- prepare(data, output);
+ prepare(data);
status = psr_wait_entry(data->debugfs_fd, PSR_MODE_2);
- cleanup(data, output);
+ cleanup(data);
return status;
}
@@ -861,7 +840,6 @@ igt_main
data_t data = {};
igt_output_t *outputs[IGT_MAX_PIPES * IGT_MAX_PIPES];
int i, j;
- enum pipe pipe;
int pipes[IGT_MAX_PIPES * IGT_MAX_PIPES];
int n_pipes = 0;
@@ -898,9 +876,9 @@ igt_main
igt_require_f(psr2_selective_fetch_check(data.debugfs_fd),
"PSR2 selective fetch not enabled\n");
- for_each_pipe_with_valid_output(&data.display, pipe, data.output) {
- if (check_psr2_support(&data, pipe)) {
- pipes[n_pipes] = pipe;
+ for_each_pipe_with_valid_output(&data.display, data.pipe, data.output) {
+ if (check_psr2_support(&data)) {
+ pipes[n_pipes] = data.pipe;
outputs[n_pipes] = data.output;
n_pipes++;
}
@@ -913,13 +891,14 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
for (j = 1; j <= MAX_DAMAGE_AREAS; j++) {
data.damage_area_count = j;
data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -932,13 +911,14 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
for (j = 1; j <= MAX_DAMAGE_AREAS; j++) {
data.damage_area_count = j;
data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -951,13 +931,14 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
for (j = 1; j <= MAX_DAMAGE_AREAS; j++) {
data.damage_area_count = j;
data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -970,11 +951,12 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -985,11 +967,12 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -1000,11 +983,12 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -1015,11 +999,12 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -1032,13 +1017,14 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
for (j = POS_TOP_LEFT; j <= POS_BOTTOM_RIGHT ; j++) {
data.pos = j;
data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -1050,11 +1036,12 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -1065,11 +1052,12 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -1080,11 +1068,12 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -1097,13 +1086,14 @@ igt_main
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ data.pipe = pipes[i];
+ data.output = outputs[i];
for (j = 1; j <= MAX_DAMAGE_AREAS; j++) {
data.damage_area_count = j;
data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
@@ -1119,13 +1109,14 @@ igt_main
igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
for (i = 0; i < n_pipes; i++) {
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i])) {
- igt_output_set_pipe(outputs[i], pipes[i]);
+ igt_output_name(outputs[i])) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
data.damage_area_count = 1;
data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data, outputs[i]);
+ prepare(&data);
run(&data);
- cleanup(&data, outputs[i]);
+ cleanup(&data);
}
}
}
--
2.34.1
More information about the igt-dev
mailing list