[igt-dev] [PATCH i-g-t 05/10] tools/intel_watermark: Extract is_cursor()
Govindapillai, Vinod
vinod.govindapillai at intel.com
Mon Feb 6 08:37:45 UTC 2023
On Wed, 2023-01-25 at 06:55 +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Make the code a bit less magical by pulling the
> "is this plane cursor?" check into helper.
>
> v2: One more
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
Reviewed-by: Vinod Govindapillai <vinod.govindapillai at intel.com>
> tools/intel_watermark.c | 25 +++++++++++++++----------
> 1 file changed, 15 insertions(+), 10 deletions(-)
>
> diff --git a/tools/intel_watermark.c b/tools/intel_watermark.c
> index eac40e4a5d17..19372db4506b 100644
> --- a/tools/intel_watermark.c
> +++ b/tools/intel_watermark.c
> @@ -131,6 +131,11 @@ static char endis_ast(bool enabled)
> return enabled ? '*' : ' ';
> }
>
> +static bool is_cursor(int plane)
> +{
> + return plane == 0;
> +}
> +
> static int skl_num_pipes(uint32_t d)
> {
> return intel_gen(d) >= 12 ? 4 : 3;
> @@ -183,7 +188,7 @@ static const char *skl_plane_name(int plane)
> {
> static char name[32];
>
> - if (plane == 0)
> + if (is_cursor(plane))
> snprintf(name, sizeof(name), "CURSOR");
> else
> snprintf(name, sizeof(name), "PLANE_%1d", plane);
> @@ -204,7 +209,7 @@ static const char *skl_plane_ctl_reg_name(int plane)
> {
> static char reg_name[32];
>
> - if (plane == 0)
> + if (is_cursor(plane))
> snprintf(reg_name, sizeof(reg_name), "CUR_CTL");
> else
> snprintf(reg_name, sizeof(reg_name), "PLANE_CTL_%1d", plane);
> @@ -216,7 +221,7 @@ static const char *skl_wm_reg_name(int plane, int level)
> {
> static char reg_name[32];
>
> - if (plane == 0)
> + if (is_cursor(plane))
> snprintf(reg_name, sizeof(reg_name), "CUR_WM_%1d", level);
> else
> snprintf(reg_name, sizeof(reg_name), "PLANE_WM_%1d_%1d", plane, level);
> @@ -228,7 +233,7 @@ static const char *skl_wm_trans_reg_name(int plane)
> {
> static char reg_name[32];
>
> - if (plane == 0)
> + if (is_cursor(plane))
> snprintf(reg_name, sizeof(reg_name), "CUR_WM_TRANS");
> else
> snprintf(reg_name, sizeof(reg_name), "PLANE_WM_TRANS_%1d", plane);
> @@ -240,7 +245,7 @@ static const char *skl_wm_sagv_reg_name(int plane)
> {
> static char reg_name[32];
>
> - if (plane == 0)
> + if (is_cursor(plane))
> snprintf(reg_name, sizeof(reg_name), "CUR_WM_SAGV");
> else
> snprintf(reg_name, sizeof(reg_name), "PLANE_WM_SAGV_%1d", plane);
> @@ -252,7 +257,7 @@ static const char *skl_wm_sagv_trans_reg_name(int plane)
> {
> static char reg_name[32];
>
> - if (plane == 0)
> + if (is_cursor(plane))
> snprintf(reg_name, sizeof(reg_name), "CUR_WM_SAGV_TRANS");
> else
> snprintf(reg_name, sizeof(reg_name), "PLANE_WM_SAGV_TRANS_%1d", plane);
> @@ -264,7 +269,7 @@ static const char *skl_buf_cfg_reg_name(int plane)
> {
> static char reg_name[32];
>
> - if (plane == 0)
> + if (is_cursor(plane))
> snprintf(reg_name, sizeof(reg_name), "CUR_BUF_CFG");
> else
> snprintf(reg_name, sizeof(reg_name), "PLANE_BUF_CFG_%1d", plane);
> @@ -328,7 +333,7 @@ static void skl_wm_dump(void)
> plane_ctl[pipe][plane] = read_reg(addr + 0x80);
> wm_trans[pipe][plane] = read_reg(addr + 0x00168);
> buf_cfg[pipe][plane] = read_reg(addr + 0x0017C);
> - if (plane != 0 && intel_gen(devid) < 11)
> + if (!is_cursor(plane) && intel_gen(devid) < 11)
> nv12_buf_cfg[pipe][plane] = read_reg(addr + 0x00178);
> else
> nv12_buf_cfg[pipe][plane] = 0;
> @@ -431,7 +436,7 @@ static void skl_wm_dump(void)
> if (intel_gen(devid) >= 11)
> continue;
>
> - if (plane == 0)
> + if (is_cursor(plane))
> continue;
>
> printf("%21s\t", skl_nv12_buf_cfg_reg_name(plane));
> @@ -458,7 +463,7 @@ static void skl_wm_dump(void)
>
> printf(" LEVEL");
> for (plane = 0; plane < num_planes; plane++) {
> - if (plane == 0)
> + if (is_cursor(plane))
> enable = REG_DECODE1(plane_ctl[pipe][plane], 0, 3) ||
> REG_DECODE1(plane_ctl[pipe][plane], 5, 1);
> else
More information about the igt-dev
mailing list