[igt-dev] [PATCH i-g-t v4 5/8] tests/i915/kms_dsc: Enable validation for VDSC YCbCr420
Swati Sharma
swati2.sharma at intel.com
Thu Jan 12 07:35:34 UTC 2023
Existing i-g-t is extended to enable validation for VDSC YCbCr420.
If a mode is supported in both RGB and YCbCr420 output formats by the
sink, i915 driver policy is to try RGB first and fall back to YCbCr420, if
mode cannot be shown using RGB. To test YCbCr420, we need a debugfs
entry (force_dsc_ycbcr420) to force this output format; so that YCbCr420 code
gets executed.
>From i-g-t, we have set this debugfs entry. However, before setting
debugfs entry, we have checked capability i.e. YCbCr420 is supported by
both platform (D14+) and sink.
Also, all the modes doesn't support both YCbCr420 and RGB formats; so if
sink and platform supports YCbCr420 we will do try commit with each mode
till we get a successful commit.
v2: -used is_dsc_ycbcr420_supported() (Ankit)
-handled try-commit correctly (Ankit)
-instead of flag use enum for output formats (Ankit)
v3: -instead of global count, pass count as para (Ankit)
-print output format (Ankit)
v4: -optimized while loop (Jouni)
-used only try commit (Jouni)
-fixed get_next_mode() (Jouni)
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
lib/igt_kms.c | 17 ++++++++
lib/igt_kms.h | 6 +++
tests/i915/kms_dsc.c | 84 +++++++++++++++++++++++++++----------
tests/i915/kms_dsc_helper.c | 45 ++++++++++++++++++++
tests/i915/kms_dsc_helper.h | 4 ++
5 files changed, 133 insertions(+), 23 deletions(-)
diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index 31e6dfda0..0f1f7c6b9 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -966,6 +966,23 @@ const char *kmstest_scaling_filter_str(int filter)
return find_type_name(scaling_filter_names, filter);
}
+static const struct type_name dsc_output_format_names[] = {
+ { DSC_FORMAT_RGB444, "RGB444" },
+ { DSC_FORMAT_YCBCR420, "YCBCR420" },
+ {}
+};
+
+/**
+ * kmstest_dsc_output_format_str:
+ * @output_format: DSC_FORMAT_* output format value
+ *
+ * Returns: A string representing the output format @output format.
+ */
+const char *kmstest_dsc_output_format_str(int output_format)
+{
+ return find_type_name(dsc_output_format_names, output_format);
+}
+
static const struct type_name connector_type_names[] = {
{ DRM_MODE_CONNECTOR_Unknown, "Unknown" },
{ DRM_MODE_CONNECTOR_VGA, "VGA" },
diff --git a/lib/igt_kms.h b/lib/igt_kms.h
index be5482e08..61ec8fbec 100644
--- a/lib/igt_kms.h
+++ b/lib/igt_kms.h
@@ -106,10 +106,16 @@ enum igt_custom_edid_type {
*/
#define kmstest_port_name(port) ((port) + 'A')
+enum dsc_output_format {
+ DSC_FORMAT_RGB444,
+ DSC_FORMAT_YCBCR420
+};
+
const char *kmstest_encoder_type_str(int type);
const char *kmstest_connector_status_str(int status);
const char *kmstest_connector_type_str(int type);
const char *kmstest_scaling_filter_str(int filter);
+const char *kmstest_dsc_output_format_str(int output_format);
void kmstest_dump_mode(drmModeModeInfo *mode);
#define MAX_HDISPLAY_PER_PIPE 5120
diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
index 0bac9d26b..366205a4e 100644
--- a/tests/i915/kms_dsc.c
+++ b/tests/i915/kms_dsc.c
@@ -80,6 +80,17 @@ static drmModeModeInfo *get_highres_mode(igt_output_t *output)
return highest_mode;
}
+static drmModeModeInfo *get_next_mode(igt_output_t *output, int index)
+{
+ drmModeConnector *connector = output->config.connector;
+ drmModeModeInfo *next_mode = NULL;
+
+ if (index < connector->count_modes)
+ next_mode = &connector->modes[index];
+
+ return next_mode;
+}
+
static bool check_big_joiner_pipe_constraint(data_t *data)
{
igt_output_t *output = data->output;
@@ -109,9 +120,11 @@ static void test_cleanup(data_t *data)
/* re-probe connectors and do a modeset with DSC */
static void update_display(data_t *data, enum dsc_test_type test_type,
- unsigned int plane_format)
+ unsigned int plane_format, enum dsc_output_format output_format)
{
+ int ret;
bool enabled;
+ int index = 0;
igt_plane_t *primary;
drmModeModeInfo *mode;
igt_output_t *output = data->output;
@@ -125,33 +138,51 @@ static void update_display(data_t *data, enum dsc_test_type test_type,
save_force_dsc_en(data->drm_fd, data->output);
force_dsc_enable(data->drm_fd, data->output);
+ if (output_format == DSC_FORMAT_YCBCR420) {
+ igt_debug("DSC YCbCr420 is supported on %s\n", data->output->name);
+ save_force_dsc_ycbcr420_en(data->drm_fd, data->output);
+ force_dsc_ycbcr420_enable(data->drm_fd, data->output);
+ }
+
if (test_type == TEST_DSC_BPC) {
igt_debug("Trying to set input BPC to %d\n", data->input_bpc);
force_dsc_enable_bpc(data->drm_fd, data->output, data->input_bpc);
}
igt_output_set_pipe(output, data->pipe);
-
- mode = get_highres_mode(output);
- igt_require(mode != NULL);
- igt_output_override_mode(output, mode);
-
primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
-
igt_skip_on(!igt_plane_has_format_mod(primary, plane_format,
DRM_FORMAT_MOD_LINEAR));
- igt_create_pattern_fb(data->drm_fd,
- mode->hdisplay,
- mode->vdisplay,
- plane_format,
- DRM_FORMAT_MOD_LINEAR,
- &data->fb_test_pattern);
-
- igt_plane_set_fb(primary, &data->fb_test_pattern);
- igt_display_commit(display);
-
- /* until we have CRC check support, manually check if RGB test
+ do {
+ if (output_format == DSC_FORMAT_YCBCR420) {
+ mode = get_next_mode(output, index);
+ index++;
+ } else
+ mode = get_highres_mode(output);
+
+ igt_require(mode != NULL);
+ igt_output_override_mode(output, mode);
+ igt_create_pattern_fb(data->drm_fd,
+ mode->hdisplay,
+ mode->vdisplay,
+ plane_format,
+ DRM_FORMAT_MOD_LINEAR,
+ &data->fb_test_pattern);
+
+ igt_plane_set_fb(primary, &data->fb_test_pattern);
+ ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (output_format == DSC_FORMAT_YCBCR420 && ret != 0) {
+ igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
+ continue;
+ } else
+ break;
+ } while(1);
+
+ igt_assert_eq(ret, 0);
+
+ /*
+ * Until we have CRC check support, manually check if RGB test
* pattern has no corruption.
*/
manual("RGB test pattern without corruption");
@@ -164,7 +195,10 @@ static void update_display(data_t *data, enum dsc_test_type test_type,
enabled ? "ON" : "OFF");
restore_force_dsc_en();
- igt_debug("Reset compression BPC\n");
+ if (output_format == DSC_FORMAT_YCBCR420)
+ restore_force_dsc_ycbcr420_en();
+
+ igt_debug("Reset input BPC\n");
data->input_bpc = 0;
force_dsc_enable_bpc(data->drm_fd, data->output, data->input_bpc);
@@ -177,7 +211,7 @@ static void update_display(data_t *data, enum dsc_test_type test_type,
}
static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
- unsigned int plane_format)
+ unsigned int plane_format, enum dsc_output_format output_format)
{
igt_display_t *display = &data->display;
igt_output_t *output;
@@ -206,15 +240,19 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
else
snprintf(name, sizeof(name), "-%s", igt_format_str(plane_format));
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(data->pipe), data->output->name, name)
- update_display(data, test_type, plane_format);
+ igt_dynamic_f("pipe-%s-%s%s-%s", kmstest_pipe_name(data->pipe), data->output->name, name, kmstest_dsc_output_format_str(output_format))
+ update_display(data, test_type, plane_format, output_format);
}
}
static void run_test(data_t *data, enum dsc_test_type test_type, int bpc,
unsigned int plane_format)
{
- test_dsc(data, test_type, bpc, plane_format);
+ test_dsc(data, test_type, bpc, plane_format, DSC_FORMAT_RGB444);
+
+ /* YCbCr420 DSC is supported on display version 14+ */
+ if ((data->disp_ver >= 14) && (is_dsc_ycbcr420_supported(data->drm_fd, data->output)))
+ test_dsc(data, test_type, bpc, plane_format, DSC_FORMAT_YCBCR420);
}
igt_main
diff --git a/tests/i915/kms_dsc_helper.c b/tests/i915/kms_dsc_helper.c
index 1a11f84ef..135e9cf58 100644
--- a/tests/i915/kms_dsc_helper.c
+++ b/tests/i915/kms_dsc_helper.c
@@ -6,7 +6,9 @@
#include "kms_dsc_helper.h"
bool force_dsc_en_orig;
+bool force_dsc_ycbcr420_en_orig;
int force_dsc_restore_fd = -1;
+int force_dsc_ycbcr420_restore_fd = -1;
void force_dsc_enable(int drmfd, igt_output_t *output)
{
@@ -51,6 +53,7 @@ void restore_force_dsc_en(void)
void kms_dsc_exit_handler(int sig)
{
restore_force_dsc_en();
+ restore_force_dsc_ycbcr420_en();
}
bool check_dsc_on_connector(int drmfd, igt_output_t *output)
@@ -97,3 +100,45 @@ bool check_gen11_bpc_constraint(int drmfd, igt_output_t *output, int input_bpc)
return true;
}
+
+void force_dsc_ycbcr420_enable(int drmfd, igt_output_t *output)
+{
+ int ret;
+
+ igt_debug("Forcing DSC YCbCr420 on %s\n", output->name);
+ ret = igt_force_dsc_ycbcr420_enable(drmfd,
+ output->name);
+ igt_assert_f(ret > 0, "forcing dsc ycbcr420 debugfs_write failed\n");
+}
+
+void save_force_dsc_ycbcr420_en(int drmfd, igt_output_t *output)
+{
+ force_dsc_ycbcr420_en_orig =
+ igt_is_force_dsc_ycbcr420_enabled(drmfd, output->name);
+ force_dsc_ycbcr420_restore_fd =
+ igt_get_dsc_ycbcr420_debugfs_fd(drmfd, output->name);
+ igt_assert(force_dsc_ycbcr420_restore_fd >= 0);
+}
+
+void restore_force_dsc_ycbcr420_en(void)
+{
+ if (force_dsc_ycbcr420_restore_fd < 0)
+ return;
+
+ igt_debug("Restoring DSC YCbCr420 enable\n");
+ igt_assert(write(force_dsc_ycbcr420_restore_fd, force_dsc_ycbcr420_en_orig ? "1" : "0", 1) == 1);
+
+ close(force_dsc_ycbcr420_restore_fd);
+ force_dsc_ycbcr420_restore_fd = -1;
+}
+
+bool is_dsc_ycbcr420_supported(int drmfd, igt_output_t *output)
+{
+ if (!igt_is_dsc_ycbcr420_supported(drmfd, output->name)) {
+ igt_debug("DSC YCbCr420 not supported on connector %s\n",
+ output->name);
+ return false;
+ }
+
+ return true;
+}
diff --git a/tests/i915/kms_dsc_helper.h b/tests/i915/kms_dsc_helper.h
index fe479dac4..83905fafe 100644
--- a/tests/i915/kms_dsc_helper.h
+++ b/tests/i915/kms_dsc_helper.h
@@ -31,5 +31,9 @@ void kms_dsc_exit_handler(int sig);
bool check_dsc_on_connector(int drmfd, igt_output_t *output);
bool check_gen11_dp_constraint(int drmfd, igt_output_t *output, enum pipe pipe);
bool check_gen11_bpc_constraint(int drmfd, igt_output_t *output, int input_bpc);
+void force_dsc_ycbcr420_enable(int drmfd, igt_output_t *output);
+void save_force_dsc_ycbcr420_en(int drmfd, igt_output_t *output);
+void restore_force_dsc_ycbcr420_en(void);
+bool is_dsc_ycbcr420_supported(int drmfd, igt_output_t *output);
#endif
--
2.25.1
More information about the igt-dev
mailing list