[igt-dev] [PATCH i-g-t v2] tests/amdgpu/amd_color: check supported color prop before running tests

[Alex Hung]

Reviewed-by: Alex Hung <alex.hung at amd.com>

On 2023-03-13 00:10, Melissa Wen wrote:
> If a DRM CRTC color prop is not advertised, the test should skip instead
> of fail. It currently fits DCE case. The driver doesn't support user
> degamma, therefore, DRM CRTC degamma properties are disabled in the
> kernel driver [1]. Previously the test just fails on DCE because the
> driver advertises degamma props although user degamma isn't supported by
> HW. Now we can just skip the test in case of a missing color prop
> support.
> 
> [1] https://lore.kernel.org/dri-devel/20221103184500.14450-1-mwen@igalia.com/
> 
> v2:
>    - replace lib/igt replace_prop_blob() in favor of AMD wrapper (Alex H.)
>    - remove regamma setup from degamma-only test case (Alex H.)
> 
> Signed-off-by: Melissa Wen <mwen at igalia.com>
> ---
>   tests/amdgpu/amd_color.c | 33 ++++++++++++++++++++++-----------
>   1 file changed, 22 insertions(+), 11 deletions(-)
> 
> diff --git a/tests/amdgpu/amd_color.c b/tests/amdgpu/amd_color.c
> index defe57bd..9eed1da3 100644
> --- a/tests/amdgpu/amd_color.c
> +++ b/tests/amdgpu/amd_color.c
> @@ -196,14 +196,6 @@ static void test_init(data_t *data)
>   
>   	igt_output_set_pipe(data->output, data->pipe_id);
>   
> -	data->degamma_lut_size =
> -		igt_pipe_obj_get_prop(data->pipe, IGT_CRTC_DEGAMMA_LUT_SIZE);
> -	igt_assert_lt(0, data->degamma_lut_size);
> -
> -	data->regamma_lut_size =
> -		igt_pipe_obj_get_prop(data->pipe, IGT_CRTC_GAMMA_LUT_SIZE);
> -	igt_assert_lt(0, data->regamma_lut_size);
> -
>   	data->w = data->mode->hdisplay;
>   	data->h = data->mode->vdisplay;
>   }
> @@ -221,6 +213,8 @@ static void test_fini(data_t *data)
>    * matrix if not passed any. The whole pipe should be in linear bypass mode
>    * when all the matrices are NULL - CRCs for a linear degamma matrix and
>    * a NULL one should match.
> + *
> + * This test skips on DCE because it doesn't support user degamma.
>    */
>   static void test_crtc_linear_degamma(data_t *data)
>   {
> @@ -231,6 +225,12 @@ static void test_crtc_linear_degamma(data_t *data)
>   
>   	test_init(data);
>   
> +	igt_require(igt_pipe_obj_has_prop(data->pipe, IGT_CRTC_DEGAMMA_LUT));
> +
> +	data->degamma_lut_size =
> +		igt_pipe_obj_get_prop(data->pipe, IGT_CRTC_DEGAMMA_LUT_SIZE);
> +	igt_assert_lt(0, data->degamma_lut_size);
> +
>   	lut_init(&lut_linear, data->degamma_lut_size);
>   	lut_gen_linear(&lut_linear, 0xffff);
>   
> @@ -239,7 +239,6 @@ static void test_crtc_linear_degamma(data_t *data)
>   
>   	/* Draw the reference image. */
>   	igt_plane_set_fb(data->primary, &afb);
> -	set_regamma_lut(data, NULL);
>   	set_degamma_lut(data, NULL);
>   	igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
>   
> @@ -252,6 +251,7 @@ static void test_crtc_linear_degamma(data_t *data)
>   	igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
>   	igt_assert_crc_equal(&ref_crc, &new_crc);
>   
> +	set_degamma_lut(data, NULL);
>   	test_fini(data);
>   	igt_remove_fb(data->fd, &afb);
>   	lut_free(&lut_linear);
> @@ -273,6 +273,12 @@ static void test_crtc_linear_regamma(data_t *data)
>   
>   	test_init(data);
>   
> +	igt_require(igt_pipe_obj_has_prop(data->pipe, IGT_CRTC_GAMMA_LUT));
> +
> +	data->regamma_lut_size =
> +		igt_pipe_obj_get_prop(data->pipe, IGT_CRTC_GAMMA_LUT_SIZE);
> +	igt_assert_lt(0, data->regamma_lut_size);
> +
>   	lut_init(&lut_linear, data->regamma_lut_size);
>   	lut_gen_linear(&lut_linear, 0xffff);
>   
> @@ -282,7 +288,6 @@ static void test_crtc_linear_regamma(data_t *data)
>   	/* Draw the reference image. */
>   	igt_plane_set_fb(data->primary, &afb);
>   	set_regamma_lut(data, NULL);
> -	set_degamma_lut(data, NULL);
>   	igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
>   
>   	igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
> @@ -294,6 +299,7 @@ static void test_crtc_linear_regamma(data_t *data)
>   	igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
>   	igt_assert_crc_equal(&ref_crc, &new_crc);
>   
> +	set_regamma_lut(data, NULL);
>   	test_fini(data);
>   	igt_remove_fb(data->fd, &afb);
>   	lut_free(&lut_linear);
> @@ -305,7 +311,7 @@ static void test_crtc_linear_regamma(data_t *data)
>    * being CRC level accurate across a full test gradient but most values should
>    * still match.
>    *
> - * This test can't pass on DCE because it doesn't support non-linear degamma.
> + * This test skips on DCE because it doesn't support user degamma.
>    */
>   static void test_crtc_lut_accuracy(data_t *data)
>   {
> @@ -331,6 +337,9 @@ static void test_crtc_lut_accuracy(data_t *data)
>   
>   	test_init(data);
>   
> +	igt_require(igt_pipe_obj_has_prop(data->pipe, IGT_CRTC_DEGAMMA_LUT));
> +	igt_require(igt_pipe_obj_has_prop(data->pipe, IGT_CRTC_GAMMA_LUT));
> +
>   	lut_init(&lut_degamma, data->degamma_lut_size);
>   	lut_gen_degamma_srgb(&lut_degamma, 0xffff);
>   
> @@ -369,6 +378,8 @@ static void test_crtc_lut_accuracy(data_t *data)
>   		igt_assert_crc_equal(&ref_crc, &new_crc);
>   	}
>   
> +	set_degamma_lut(data, NULL);
> +	set_regamma_lut(data, NULL);
>   	test_fini(data);
>   	igt_remove_fb(data->fd, &afb);
>   	lut_free(&lut_regamma);