[igt-dev] [i-g-t V3 2/7] tests/i915/kms_big_joiner: Fix Bigjoiner checks
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Fri Mar 31 06:50:24 UTC 2023
Bigjoiner will come in the picture when the resolution > 5K or
clock > max dot-clock. Add a support to check the selected mode
clock is greater than the max dot-clock.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/i915/kms_big_joiner.c | 67 +++++++++++++++++++++----------------
1 file changed, 38 insertions(+), 29 deletions(-)
diff --git a/tests/i915/kms_big_joiner.c b/tests/i915/kms_big_joiner.c
index 8be60ea1176..adc37be719d 100644
--- a/tests/i915/kms_big_joiner.c
+++ b/tests/i915/kms_big_joiner.c
@@ -26,10 +26,13 @@
#include "igt.h"
-#define MAX_HDISPLAY_PER_PIPE 5120
-
IGT_TEST_DESCRIPTION("Test big joiner");
+typedef struct {
+ uint32_t output;
+ drmModeModeInfo mode;
+} big_joiner;
+
typedef struct {
int drm_fd;
igt_display_t display;
@@ -37,7 +40,7 @@ typedef struct {
int n_pipes;
enum pipe pipe1;
enum pipe pipe2;
- uint32_t big_joiner_output[2];
+ big_joiner big_joiner_output[2];
} data_t;
static void test_invalid_modeset(data_t *data)
@@ -91,7 +94,7 @@ static void test_basic_modeset(data_t *data)
igt_display_reset(display);
for_each_connected_output(display, output) {
- if (data->big_joiner_output[0] == output->id) {
+ if (data->big_joiner_output[0].output == output->id) {
big_joiner_output = output;
break;
}
@@ -99,9 +102,7 @@ static void test_basic_modeset(data_t *data)
igt_output_set_pipe(big_joiner_output, data->pipe1);
- igt_sort_connector_modes(big_joiner_output->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output->config.connector->modes[0];
+ mode = &data->big_joiner_output[0].mode;
igt_output_override_mode(big_joiner_output, mode);
pipe = &display->pipes[data->pipe1];
@@ -130,7 +131,7 @@ static void test_dual_display(data_t *data)
igt_display_reset(display);
for_each_connected_output(display, output) {
- if (data->big_joiner_output[count] == output->id) {
+ if (data->big_joiner_output[count].output == output->id) {
big_joiner_output[count] = output;
count++;
}
@@ -143,9 +144,7 @@ static void test_dual_display(data_t *data)
igt_output_set_pipe(big_joiner_output[1], data->pipe2);
/* Set up first big joiner output on Pipe A*/
- igt_sort_connector_modes(big_joiner_output[0]->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output[0]->config.connector->modes[0];
+ mode = &data->big_joiner_output[0].mode;
igt_output_override_mode(big_joiner_output[0], mode);
pipe = &display->pipes[data->pipe1];
@@ -156,9 +155,7 @@ static void test_dual_display(data_t *data)
igt_plane_set_size(plane1, mode->hdisplay, mode->vdisplay);
/* Set up second big joiner output on Pipe C*/
- igt_sort_connector_modes(big_joiner_output[1]->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output[1]->config.connector->modes[0];
+ mode = &data->big_joiner_output[1].mode;
igt_output_override_mode(big_joiner_output[1], mode);
pipe = &display->pipes[data->pipe2];
@@ -186,6 +183,8 @@ igt_main
int valid_output = 0, i, count = 0, j = 0;
uint16_t width = 0, height = 0;
enum pipe pipe_seq[IGT_MAX_PIPES];
+ int max_dotclock;
+ bool retry = false;
igt_fixture {
data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
@@ -194,13 +193,22 @@ igt_main
igt_display_require(&data.display, data.drm_fd);
igt_require(data.display.is_atomic);
+ max_dotclock = igt_get_max_dotclock(data.drm_fd);
+retry:
for_each_connected_output(&data.display, output) {
+ /*
+ * Bigjoiner will come in the picture when
+ * the resolution > 5K or clock > max-dot-clock.
+ */
igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
+ retry ? sort_drm_modes_by_clk_dsc :
+ sort_drm_modes_by_res_dsc);
mode = &output->config.connector->modes[0];
- if (mode->hdisplay > MAX_HDISPLAY_PER_PIPE) {
- data.big_joiner_output[count++] = output->id;
+ if (igt_bigjoiner_possible(mode, max_dotclock)) {
+ data.big_joiner_output[count].output = output->id;
+ memcpy(&data.big_joiner_output[count].mode, mode, sizeof(drmModeModeInfo));
+ count++;
width = max(width, mode->hdisplay);
height = max(height, mode->vdisplay);
@@ -208,6 +216,11 @@ igt_main
valid_output++;
}
+ if (!count && !retry) {
+ retry = true;
+ goto retry;
+ }
+
data.n_pipes = 0;
for_each_pipe(&data.display, i) {
data.n_pipes++;
@@ -215,7 +228,7 @@ igt_main
j++;
}
- igt_require_f(count > 0, "No output with 5k+ mode found\n");
+ igt_require_f(count > 0, "No output with 5k+ mode (or) clock > max-dot-clock found\n");
igt_create_pattern_fb(data.drm_fd, width, height, DRM_FORMAT_XRGB8888,
DRM_FORMAT_MOD_LINEAR, &data.fb);
@@ -237,14 +250,12 @@ igt_main
igt_display_reset(&data.display);
for_each_connected_output(&data.display, output) {
- if (data.big_joiner_output[0] != output->id)
+ if (data.big_joiner_output[0].output != output->id)
continue;
- igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
-
+ mode = &data.big_joiner_output[0].mode;
igt_output_set_pipe(output, data.pipe1);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
+ igt_output_override_mode(output, mode);
igt_dynamic_f("pipe-%s-%s",
kmstest_pipe_name(data.pipe1),
@@ -261,17 +272,15 @@ igt_main
igt_display_reset(&data.display);
for_each_connected_output(&data.display, output) {
- igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
-
- if (data.big_joiner_output[0] == output->id) {
+ if (data.big_joiner_output[0].output == output->id) {
first_output = output;
+ mode = &data.big_joiner_output[0].mode;
+
igt_output_set_pipe(output, data.pipe1);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
+ igt_output_override_mode(output, mode);
} else if (second_output == NULL) {
second_output = output;
igt_output_set_pipe(output, data.pipe2);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
break;
}
--
2.40.0
More information about the igt-dev
mailing list