[igt-dev] [i-g-t 5/5] tests/kms_setmode: Fix Bigjoiner checks

Bhanuprakash Modem bhanuprakash.modem at intel.com
Wed May 17 05:24:34 UTC 2023


Bigjoiner will come in the picture when the resolution > 5K or
clock > max dot-clock. Add a support to check the selected mode
clock is greater than the max dot-clock.

V2: - Limit the bigjoiner checks to intel hardware

Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
 tests/kms_setmode.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/tests/kms_setmode.c b/tests/kms_setmode.c
index a611d9382..193096537 100644
--- a/tests/kms_setmode.c
+++ b/tests/kms_setmode.c
@@ -41,13 +41,12 @@
 /* restricted pipe count */
 #define CRTC_RESTRICT_CNT 2
 
-#define MAX_HDISPLAY_PER_CRTC 5120
-
 static int drm_fd;
 static drmModeRes *drm_resources;
 static int filter_test_id;
 static bool dry_run;
 static bool extended = false;
+static int max_dotclock;
 
 const drmModeModeInfo mode_640_480 = {
 	.name		= "640x480",
@@ -661,28 +660,35 @@ static void test_one_combination(const struct test_config *tconf,
 			pos += get_test_name_str(&crtcs[i], &test_name[pos], ARRAY_SIZE(test_name) - pos);
 		}
 
+		if (!is_intel_device(drm_fd))
+			goto test;
+
 		for (i = 0; i < crtc_count; i++) {
 			struct crtc_config *crtc = &crtcs[i];
 
 			/*
-			 * if mode.hdisplay > 5120, then ignore
+			 * Handle BW limitations on intel hardware:
+			 *
+			 * if mode resolution > 5K (or) mode clock > max_dotclock,
+			 * then ignore
 			 *   - last crtc in single/multi-connector config
 			 *   - consecutive crtcs in multi-connector config
 			 *
 			 * in multi-connector config ignore if
-			 *   - previous crtc mode.hdisplay > 5120 and
+			 *   - previous crtc (mode resolution > 5K (or)
+			 *     mode clock > max_dotclock) and
 			 *   - current & previous crtcs are consecutive
 			 */
-			if (((crtc->mode.hdisplay > MAX_HDISPLAY_PER_CRTC) &&
+			if ((igt_bigjoiner_possible(&crtc->mode, max_dotclock) &&
 			     ((crtc->crtc_idx >= (tconf->resources->count_crtcs - 1)) ||
 			      ((i < (crtc_count - 1)) && (abs(crtcs[i + 1].crtc_idx - crtc->crtc_idx) <= 1)))) ||
-			    ((i > 0) && (crtc[i - 1].mode.hdisplay > MAX_HDISPLAY_PER_CRTC) &&
+			    ((i > 0) && igt_bigjoiner_possible(&crtc[i - 1].mode, max_dotclock) &&
 			     (abs(crtc->crtc_idx - crtcs[i - 1].crtc_idx) <= 1))) {
 				igt_info("Combo: %s is not possible with selected mode(s).\n", test_name);
 				goto out;
 			}
 		}
-
+test:
 		igt_dynamic_f("%s", test_name)
 			test_crtc_config(tconf, crtcs, crtc_count);
 	}
@@ -958,6 +964,8 @@ igt_main_args("det:", NULL, help_str, opt_handler, NULL)
 
 		if (is_xe_device(drm_fd))
 			xe_device_get(drm_fd);
+
+		max_dotclock = igt_get_max_dotclock(drm_fd);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(tests); i++) {
-- 
2.40.0



More information about the igt-dev mailing list