[igt-dev] [PATCHv2 i-g-t 4/4] tests/kms_async_flips: Test all modifiers

[Karthik B S]

On 5/18/2023 4:55 PM, Arun R Murthy wrote:
> Run the basic async flip test for all modifiers reported
> by the plane (for the XRGB8888 format). The driver may not
> support async flip with all modifiers so we allow this to fail.
>
> v2: print output name along with the modifier
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Arun R Murthy <arun.r.murthy at intel.com>
Reviewed-by: Karthik B S <karthik.b.s at intel.com>
> ---
>   tests/kms_async_flips.c | 51 +++++++++++++++++++++++++++++++++--------
>   1 file changed, 41 insertions(+), 10 deletions(-)
>
> diff --git a/tests/kms_async_flips.c b/tests/kms_async_flips.c
> index c86bc18b..3fbd4084 100644
> --- a/tests/kms_async_flips.c
> +++ b/tests/kms_async_flips.c
> @@ -53,6 +53,8 @@ typedef struct {
>   	igt_output_t *output;
>   	unsigned long flip_timestamp_us;
>   	double flip_interval;
> +	uint64_t modifier;
> +	igt_plane_t *plane;
>   	igt_pipe_crc_t *pipe_crc;
>   	igt_crc_t ref_crc;
>   	int flip_count;
> @@ -60,6 +62,7 @@ typedef struct {
>   	bool flip_pending;
>   	enum pipe pipe;
>   	bool alternate_sync_async;
> +	bool allow_fail;
>   } data_t;
>   
>   static void flip_handler(int fd_, unsigned int sequence, unsigned int tv_sec,
> @@ -132,7 +135,7 @@ static void make_fb(data_t *data, struct igt_fb *fb,
>   	rec_width = width / (ARRAY_SIZE(data->bufs) * 2);
>   
>   	igt_create_color_fb(data->drm_fd, width, height, DRM_FORMAT_XRGB8888,
> -			    default_modifier(data), 0.0, 0.0, 0.5, fb);
> +			    data->modifier, 0.0, 0.0, 0.5, fb);
>   
>   	cr = igt_get_cairo_ctx(data->drm_fd, fb);
>   	igt_paint_color_rand(cr, rec_width * 2 + rec_width * index, 0, rec_width, height);
> @@ -158,24 +161,26 @@ static void test_init(data_t *data)
>   	data->refresh_rate = mode->vrefresh;
>   
>   	igt_output_set_pipe(data->output, data->pipe);
> +
> +	data->plane = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
>   }
>   
>   static void test_init_fbs(data_t *data)
>   {
>   	int i;
>   	uint32_t width, height;
> -	igt_plane_t *plane;
>   	static uint32_t prev_output_id;
> +	static uint64_t prev_modifier;
>   	drmModeModeInfo *mode;
>   
>   	mode = igt_output_get_mode(data->output);
>   	width = mode->hdisplay;
>   	height = mode->vdisplay;
>   
> -	plane = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
> -
> -	if (prev_output_id != data->output->id) {
> +	if (prev_output_id != data->output->id ||
> +	    prev_modifier != data->modifier) {
>   		prev_output_id = data->output->id;
> +		prev_modifier = data->modifier;
>   
>   		if (data->bufs[0].fb_id) {
>   			for (i = 0; i < ARRAY_SIZE(data->bufs); i++)
> @@ -186,8 +191,8 @@ static void test_init_fbs(data_t *data)
>   			make_fb(data, &data->bufs[i], width, height, i);
>   	}
>   
> -	igt_plane_set_fb(plane, &data->bufs[0]);
> -	igt_plane_set_size(plane, width, height);
> +	igt_plane_set_fb(data->plane, &data->bufs[0]);
> +	igt_plane_set_size(data->plane, width, height);
>   
>   	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
>   }
> @@ -242,8 +247,10 @@ static void test_async_flip(data_t *data)
>   		ret = drmModePageFlip(data->drm_fd, data->crtc_id,
>   				      data->bufs[frame % 4].fb_id,
>   				      flags, data);
> -
> -		igt_assert(ret == 0);
> +		if (frame == 1 && data->allow_fail)
> +			igt_skip_on(ret == -EINVAL);
> +		else
> +			igt_assert(ret == 0);
>   
>   		wait_flip_event(data);
>   
> @@ -555,6 +562,8 @@ static void run_test(data_t *data, void (*test)(data_t *))
>   			continue;
>   
>   		test_init(data);
> +		data->allow_fail = false;
> +		data->modifier = default_modifier(data);
>   		igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(data->pipe), data->output->name) {
>   			test_init_fbs(data);
>   			test(data);
> @@ -562,6 +571,28 @@ static void run_test(data_t *data, void (*test)(data_t *))
>   	}
>   }
>   
> +static void run_test_with_modifiers(data_t *data, void (*test)(data_t *))
> +{
> +	for_each_pipe_with_valid_output(&data->display, data->pipe, data->output) {
> +		test_init(data);
> +
> +		for (int i = 0; i < data->plane->format_mod_count; i++) {
> +			if (data->plane->formats[i] != DRM_FORMAT_XRGB8888)
> +				continue;
> +
> +			data->allow_fail = true;
> +			data->modifier = data->plane->modifiers[i];
> +
> +			igt_dynamic_f("pipe-%s-%s-%s", kmstest_pipe_name(data->pipe),
> +				      data->output->name,
> +				      igt_fb_modifier_name(data->modifier)) {
> +				test_init_fbs(data);
> +				test(data);
> +			}
> +		}
> +	}
> +}
> +
>   static data_t data;
>   
>   igt_main_args("e", NULL, NULL, NULL, &data)
> @@ -592,7 +623,7 @@ igt_main_args("e", NULL, NULL, NULL, &data)
>   		igt_describe("Wait for page flip events in between successive asynchronous flips");
>   		igt_subtest_with_dynamic("async-flip-with-page-flip-events") {
>   			data.alternate_sync_async = false;
> -			run_test(&data, test_async_flip);
> +			run_test_with_modifiers(&data, test_async_flip);
>   		}
>   
>   		igt_describe("Alternate between sync and async flips");