[igt-dev] [PATCH i-g-t v6] tests/kms_frontbuffer_tracking: Extend the test to enable FBC for each plane
Modem, Bhanuprakash
bhanuprakash.modem at intel.com
Fri Nov 3 15:41:15 UTC 2023
Hi Nidhi,
On Fri-03-11-2023 08:57 am, Nidhi Gupta wrote:
> Added a new subtest to validate FBC on each plane, this new subtest
> will first disable the fbc feature on all pipes and planes and then
> enable it on all plane one by one and confirm.
>
> v2: Modify tests to disable primary and enable other plane
> to check fbc is enabled or not. <Bhanu>
>
> v3: Implemented design changes as suggested <Bhanu>
>
> v4: Fixed nitpicks (Bhanu)
>
> Signed-off-by: Nidhi Gupta <nidhi1.gupta at intel.com>
> ---
> tests/intel/kms_frontbuffer_tracking.c | 106 +++++++++++++++++++++++++
> 1 file changed, 106 insertions(+)
>
> diff --git a/tests/intel/kms_frontbuffer_tracking.c b/tests/intel/kms_frontbuffer_tracking.c
> index f90d09f9f..61c0dd0fd 100644
> --- a/tests/intel/kms_frontbuffer_tracking.c
> +++ b/tests/intel/kms_frontbuffer_tracking.c
> @@ -43,6 +43,15 @@
> #include "igt_sysfs.h"
> #include "igt_psr.h"
>
> +/**
> + * SUBTEST: plane-fbc-rte
> + * Description: Sanity test to enable FBC on a plane.
> + * Driver requirement: i915, xe
> + * Functionality: fbc
> + * Mega feature: General Display Features
> + * Test category: functionality test
> + */
> +
> #define TIME SLOW_QUICK(1000, 10000)
>
> IGT_TEST_DESCRIPTION("Test the Kernel's frontbuffer tracking mechanism and "
> @@ -888,6 +897,17 @@ static bool fbc_mode_too_large(void)
> return strstr(buf, "FBC disabled: mode too large for compression\n");
> }
>
> +static bool fbc_enable_per_plane(int plane_index, enum pipe pipe)
> +{
> + char buf[128];
> + char buf_plane[128];
> +
> + sprintf(buf_plane, "%d%s", plane_index, kmstest_pipe_name(pipe));
> +
> + debugfs_read_crtc("i915_fbc_status", buf);
> + return strstr(strstr(buf, "*"), buf_plane);
> +}
> +
> static bool drrs_wait_until_rr_switch_to_low(void)
> {
> return igt_wait(is_drrs_low(), 5000, 1);
> @@ -1691,6 +1711,27 @@ static void set_region_for_test(const struct test_mode *t,
> do_assertions(ASSERT_NO_ACTION_CHANGE);
> }
>
> +static void set_plane_for_test_fbc(const struct test_mode *t, igt_plane_t *plane)
> +{
> + struct igt_fb fb;
> + uint32_t color;
> +
Please print some plane information, as it is easy to debug the failures.
> + create_fb(t->format, prim_mode_params.mode.hdisplay, prim_mode_params.mode.vdisplay, t->tiling, t->plane, &fb);
> + color = pick_color(&fb, COLOR_PRIM_BG);
> + igt_draw_rect_fb(drm.fd, drm.bops, 0, &fb, IGT_DRAW_BLT,
> + 0, 0, fb.width, fb.height,
> + color);
Code looks clumsy to me, please follow some coding standards.
Please add newline here.
> + igt_plane_set_fb(plane, &fb);
> + igt_plane_set_position(plane, 0, 0);
> + igt_plane_set_size(plane, prim_mode_params.mode.hdisplay, prim_mode_params.mode.vdisplay);
> + igt_fb_set_size(&fb, plane, prim_mode_params.mode.hdisplay, prim_mode_params.mode.vdisplay);
> + igt_display_commit_atomic(&drm.display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
Please add newline here.
> + wanted_crc = &blue_crcs[t->format].crc;
-----------------------^
This won't change per plane, please move it to plane_fbc_rte_subtest()
> + fbc_update_last_action();
> + do_assertions(ASSERT_FBC_ENABLED);
----------------------------------------^
As we are checking fbc lastupdate, don't we need to check for
ASSERT_NO_ACTION_CHANGE too?
> + igt_assert_f(fbc_enable_per_plane(plane->index, prim_mode_params.pipe), "FBC disabled\n");
> +}
> +
> static bool enable_features_for_test(const struct test_mode *t)
> {
> bool ret = false;
> @@ -1941,6 +1982,57 @@ static void rte_subtest(const struct test_mode *t)
> }
> }
>
> +static bool is_valid_plane(igt_plane_t *plane)
> +{
> + int index = plane->index;
> +
> + if (plane->type == DRM_PLANE_TYPE_CURSOR)
> + return false;
> + /*
> + * Execute test only on first three planes
> + */
> + return ((index >= 0) && (index < 3));
> +}
> +
> +/**
> + * plane-fbc-rte - the basic sanity test
> + *
> + * METHOD
> + * Just disable primary screen, assert everything is disabled, then enable single
> + * screens and single plane one by one and assert that the tested fbc is enabled
> + * for the particular plane.
> + *
> + * EXPECTED RESULTS
> + * Blue screens and t->feature enabled.
> + *
> + * FAILURES
> + * A failure here means that fbc is not getting enabled for requested plane. It means
> + * kernel is not able to enable fbc on the requested plane.
> + */
> +
> +static void plane_fbc_rte_subtest(const struct test_mode *t)
> +{
> + int ver;
> + igt_plane_t *plane;
> +
> + ver = intel_display_ver(intel_get_drm_devid(drm.fd));
I can see, we are checking display version multiple times across this
test, need a cleanup to call it once & preserve the info in data.
Anyway that is outof context to this patch.
> + igt_require_f((ver >= 20), "Can't test fbc for each plane\n");
Please add newline here.
> + prepare_subtest_data(t, NULL);
> + unset_all_crtcs();
> + do_assertions(ASSERT_FBC_DISABLED | DONT_ASSERT_CRC);
Please add newline here.
> + igt_output_override_mode(prim_mode_params.output, &prim_mode_params.mode);
> + igt_output_set_pipe(prim_mode_params.output, prim_mode_params.pipe);
> +
> + for_each_plane_on_pipe(&drm.display, prim_mode_params.pipe, plane) {
> + if (!is_valid_plane(plane))
> + continue;
Please add newline here.
> + set_plane_for_test_fbc(t, plane);
We need a cleanup here or in set_plane_for_test_fbc(). Otherwise plane-0
is always enabled even you tried to test plane-1 or 2 which causes
unexpected result.
> + }
> +
> + plane = NULL;
Doesn't matter to make it NULL, as this variable stays in stack.
> + igt_display_reset(&drm.display);
Good to have it, but not mandatory.
- Bhanu
> +}
> +
> static void update_wanted_crc(const struct test_mode *t, igt_crc_t *crc)
> {
> if (t->screen == SCREEN_PRIM)
> @@ -4936,6 +5028,20 @@ igt_main_args("", long_options, help_str, opt_handler, NULL)
> }
> }
>
> + t.pipes = PIPE_SINGLE;
> + t.feature = FEATURE_FBC;
> + t.screen = SCREEN_PRIM;
> + t.fbs = FBS_INDIVIDUAL;
> + t.format = FORMAT_DEFAULT;
> + /* Make sure nothing is using these values. */
> + t.flip = -1;
> + t.method = -1;
> + t.tiling = opt.tiling;
> +
> + igt_subtest_f("plane-fbc-rte") {
> + plane_fbc_rte_subtest(&t);
> + }
> +
> TEST_MODE_ITER_BEGIN(t)
>
> igt_subtest_f("%s-%s-%s-%s-%s-draw-%s",
More information about the igt-dev
mailing list