[igt-dev] [i-g-t 3/5] tests/i915/kms_big_joiner: Fix Bigjoiner checks
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Mon Nov 13 08:19:28 UTC 2023
Bigjoiner will come in the picture when the resolution > 5K or
clock > max dot-clock. Add a support to check the selected mode
clock is greater than the max dot-clock.
V2: - Handle both 5k & max dot clock cases
- Other minor cleanups
V3: - Fix the logic to avoid the retry
V4: - consistent naming for bigjoiner
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
Reviewed-by: Kunal Joshi <kunal1.joshi at intel.com>
---
tests/intel/kms_big_joiner.c | 106 ++++++++++++++++++++---------------
1 file changed, 61 insertions(+), 45 deletions(-)
diff --git a/tests/intel/kms_big_joiner.c b/tests/intel/kms_big_joiner.c
index a555ca799..2f81204f5 100644
--- a/tests/intel/kms_big_joiner.c
+++ b/tests/intel/kms_big_joiner.c
@@ -31,10 +31,13 @@
*/
#include "igt.h"
-#define MAX_HDISPLAY_PER_PIPE 5120
-
IGT_TEST_DESCRIPTION("Test big joiner");
+struct bigjoiner_output {
+ uint32_t output_id;
+ drmModeModeInfo mode;
+};
+
typedef struct {
int drm_fd;
igt_display_t display;
@@ -42,9 +45,11 @@ typedef struct {
int n_pipes;
enum pipe pipe1;
enum pipe pipe2;
- uint32_t big_joiner_output[2];
+ struct bigjoiner_output output[2];
} data_t;
+static int max_dotclock;
+
/**
* SUBTEST: invalid-modeset
* Description: Verify if the modeset on the adjoining pipe is rejected when
@@ -105,7 +110,7 @@ static void test_invalid_modeset(data_t *data)
static void test_basic_modeset(data_t *data)
{
drmModeModeInfo *mode;
- igt_output_t *output, *big_joiner_output = NULL;
+ igt_output_t *output, *bigjoiner_output = NULL;
igt_display_t *display = &data->display;
igt_pipe_t *pipe;
igt_plane_t *plane;
@@ -113,18 +118,16 @@ static void test_basic_modeset(data_t *data)
igt_display_reset(display);
for_each_connected_output(display, output) {
- if (data->big_joiner_output[0] == output->id) {
- big_joiner_output = output;
+ if (data->output[0].output_id == output->id) {
+ bigjoiner_output = output;
break;
}
}
- igt_output_set_pipe(big_joiner_output, data->pipe1);
+ igt_output_set_pipe(bigjoiner_output, data->pipe1);
- igt_sort_connector_modes(big_joiner_output->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output->config.connector->modes[0];
- igt_output_override_mode(big_joiner_output, mode);
+ mode = &data->output[0].mode;
+ igt_output_override_mode(bigjoiner_output, mode);
pipe = &display->pipes[data->pipe1];
plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
@@ -135,7 +138,7 @@ static void test_basic_modeset(data_t *data)
igt_display_commit2(display, COMMIT_ATOMIC);
- igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+ igt_output_set_pipe(bigjoiner_output, PIPE_NONE);
igt_plane_set_fb(plane, NULL);
igt_display_commit2(display, COMMIT_ATOMIC);
}
@@ -151,7 +154,7 @@ static void test_basic_modeset(data_t *data)
static void test_dual_display(data_t *data)
{
drmModeModeInfo *mode;
- igt_output_t *output, *big_joiner_output[2];
+ igt_output_t *output, *bigjoiner_output[2];
igt_display_t *display = &data->display;
igt_pipe_t *pipe;
igt_plane_t *plane1, *plane2;
@@ -160,8 +163,8 @@ static void test_dual_display(data_t *data)
igt_display_reset(display);
for_each_connected_output(display, output) {
- if (data->big_joiner_output[count] == output->id) {
- big_joiner_output[count] = output;
+ if (data->output[count].output_id == output->id) {
+ bigjoiner_output[count] = output;
count++;
}
@@ -169,14 +172,12 @@ static void test_dual_display(data_t *data)
break;
}
- igt_output_set_pipe(big_joiner_output[0], data->pipe1);
- igt_output_set_pipe(big_joiner_output[1], data->pipe2);
+ igt_output_set_pipe(bigjoiner_output[0], data->pipe1);
+ igt_output_set_pipe(bigjoiner_output[1], data->pipe2);
/* Set up first big joiner output on Pipe A*/
- igt_sort_connector_modes(big_joiner_output[0]->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output[0]->config.connector->modes[0];
- igt_output_override_mode(big_joiner_output[0], mode);
+ mode = &data->output[0].mode;
+ igt_output_override_mode(bigjoiner_output[0], mode);
pipe = &display->pipes[data->pipe1];
plane1 = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
@@ -186,10 +187,8 @@ static void test_dual_display(data_t *data)
igt_plane_set_size(plane1, mode->hdisplay, mode->vdisplay);
/* Set up second big joiner output on Pipe C*/
- igt_sort_connector_modes(big_joiner_output[1]->config.connector,
- sort_drm_modes_by_res_dsc);
- mode = &big_joiner_output[1]->config.connector->modes[0];
- igt_output_override_mode(big_joiner_output[1], mode);
+ mode = &data->output[1].mode;
+ igt_output_override_mode(bigjoiner_output[1], mode);
pipe = &display->pipes[data->pipe2];
plane2 = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
@@ -201,13 +200,23 @@ static void test_dual_display(data_t *data)
igt_display_commit2(display, COMMIT_ATOMIC);
/* Clean up */
- igt_output_set_pipe(big_joiner_output[0], PIPE_NONE);
- igt_output_set_pipe(big_joiner_output[1], PIPE_NONE);
+ igt_output_set_pipe(bigjoiner_output[0], PIPE_NONE);
+ igt_output_set_pipe(bigjoiner_output[1], PIPE_NONE);
igt_plane_set_fb(plane1, NULL);
igt_plane_set_fb(plane2, NULL);
igt_display_commit2(display, COMMIT_ATOMIC);
}
+static bool bigjoiner_mode_found(drmModeConnector *connector,
+ int (*sort_method)(const void *, const void*),
+ drmModeModeInfo *mode)
+{
+ igt_sort_connector_modes(connector, sort_method);
+ *mode = connector->modes[0];
+
+ return igt_bigjoiner_possible(mode, max_dotclock);
+}
+
igt_main
{
data_t data;
@@ -224,13 +233,24 @@ igt_main
igt_display_require(&data.display, data.drm_fd);
igt_require(data.display.is_atomic);
- for_each_connected_output(&data.display, output) {
- igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
+ max_dotclock = igt_get_max_dotclock(data.drm_fd);
- mode = &output->config.connector->modes[0];
- if (mode->hdisplay > MAX_HDISPLAY_PER_PIPE) {
- data.big_joiner_output[count++] = output->id;
+ for_each_connected_output(&data.display, output) {
+ bool found = false;
+ drmModeConnector *connector = output->config.connector;
+
+ /*
+ * Bigjoiner will come in to the picture when the
+ * resolution > 5K or clock > max-dot-clock.
+ */
+ found = (bigjoiner_mode_found(connector, sort_drm_modes_by_res_dsc, mode) ||
+ bigjoiner_mode_found(connector, sort_drm_modes_by_clk_dsc, mode)) ?
+ true : false;
+
+ if (found) {
+ data.output[count].output_id = output->id;
+ memcpy(&data.output[count].mode, mode, sizeof(drmModeModeInfo));
+ count++;
width = max(width, mode->hdisplay);
height = max(height, mode->vdisplay);
@@ -245,7 +265,7 @@ igt_main
j++;
}
- igt_require_f(count > 0, "No output with 5k+ mode found\n");
+ igt_require_f(count > 0, "No output with 5k+ mode (or) clock > max-dot-clock found\n");
igt_create_pattern_fb(data.drm_fd, width, height, DRM_FORMAT_XRGB8888,
DRM_FORMAT_MOD_LINEAR, &data.fb);
@@ -267,14 +287,12 @@ igt_main
igt_display_reset(&data.display);
for_each_connected_output(&data.display, output) {
- if (data.big_joiner_output[0] != output->id)
+ if (data.output[0].output_id != output->id)
continue;
- igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
-
+ mode = &data.output[0].mode;
igt_output_set_pipe(output, data.pipe1);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
+ igt_output_override_mode(output, mode);
igt_dynamic_f("pipe-%s-%s",
kmstest_pipe_name(data.pipe1),
@@ -291,17 +309,15 @@ igt_main
igt_display_reset(&data.display);
for_each_connected_output(&data.display, output) {
- igt_sort_connector_modes(output->config.connector,
- sort_drm_modes_by_res_dsc);
-
- if (data.big_joiner_output[0] == output->id) {
+ if (data.output[0].output_id == output->id) {
first_output = output;
+ mode = &data.output[0].mode;
+
igt_output_set_pipe(output, data.pipe1);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
+ igt_output_override_mode(output, mode);
} else if (second_output == NULL) {
second_output = output;
igt_output_set_pipe(output, data.pipe2);
- igt_output_override_mode(output, &output->config.connector->modes[0]);
break;
}
--
2.40.0
More information about the igt-dev
mailing list