[igt-dev] [i-g-t V2 5/6] tests/kms_vrr: Add new subtest to switch RR without modeset
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Thu Nov 30 17:38:36 UTC 2023
Add new subtest to switch between low refresh rate to high
refresh rate and vice versa seamlessly without modeset.
Below are the sequence of operations to perform:
With VRR:
+---------------------------+
| Step | VRR | Mode | Flip |
+------+------+------+------+
| 1 | Off | High | Yes |
| 2 | On | Low | Yes |
| 3 | On | High | Yes |
| 4 | Off | High | No |
+------+------+------+------+
Without VRR:
+---------------------------+
| Step | VRR | Mode | Flip |
+------+------+------+------+
| 1 | Off | High | Yes |
| 2 | Off | Low | Yes |
| 3 | Off | High | Yes |
+------+------+------+------+
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/kms_vrr.c | 137 ++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 126 insertions(+), 11 deletions(-)
diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
index b58cbe0bb..2fc80fc1d 100644
--- a/tests/kms_vrr.c
+++ b/tests/kms_vrr.c
@@ -53,6 +53,10 @@
* SUBTEST: flipline
* Description: Make sure that flips happen at flipline decision boundary.
*
+ * SUBTEST: seamless-rr-switch
+ * Description: Test to switch RR seamlessly without modeset.
+ * Functionality: adaptive_sync, drrs, lrr
+ *
* SUBTEST: negative-basic
* Description: Make sure that VRR should not be enabled on the Non-VRR panel.
*/
@@ -70,7 +74,14 @@ enum {
TEST_DPMS = 1 << 1,
TEST_SUSPEND = 1 << 2,
TEST_FLIPLINE = 1 << 3,
- TEST_NEGATIVE = 1 << 4,
+ TEST_SEAMLESS_RR = 1 << 4,
+ TEST_NEGATIVE = 1 << 5,
+};
+
+enum {
+ HIGH_RR_MODE,
+ LOW_RR_MODE,
+ RR_MODES_COUNT,
};
typedef struct range {
@@ -85,6 +96,7 @@ typedef struct data {
igt_fb_t fb0;
igt_fb_t fb1;
range_t range;
+ drmModeModeInfo switch_modes[RR_MODES_COUNT];
} data_t;
typedef struct vtest_ns {
@@ -166,6 +178,24 @@ output_mode_with_maxrate(igt_output_t *output, unsigned int vrr_max)
return mode;
}
+static drmModeModeInfo
+low_rr_mode_with_same_res(igt_output_t *output, unsigned int vrr_min)
+{
+ int i;
+ drmModeConnectorPtr connector = output->config.connector;
+ drmModeModeInfo mode = *igt_output_get_mode(output);
+
+ for (i = 0; i < connector->count_modes; i++)
+ /* TODO: Improve checks for downclock */
+ if (connector->modes[i].hdisplay == mode.hdisplay &&
+ connector->modes[i].vdisplay == mode.vdisplay &&
+ connector->modes[i].vrefresh < mode.vrefresh &&
+ connector->modes[i].vrefresh >= vrr_min)
+ mode = connector->modes[i];
+
+ return mode;
+}
+
/* Read min and max vrr range from the connector debugfs. */
static range_t
get_vrr_range(data_t *data, igt_output_t *output)
@@ -378,6 +408,9 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
igt_info("VRR Test execution on %s, PIPE_%s with VRR range: (%u-%u) Hz\n",
output->name, kmstest_pipe_name(pipe), range.min, range.max);
+ igt_info("Override Mode: ");
+ kmstest_dump_mode(&data->switch_modes[HIGH_RR_MODE]);
+
set_vrr_on_pipe(data, pipe, true);
/*
@@ -454,7 +487,9 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
static void test_cleanup(data_t *data, enum pipe pipe, igt_output_t *output)
{
- igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, false);
+ if (vrr_capable(output))
+ igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, false);
+
igt_plane_set_fb(data->primary, NULL);
igt_output_set_pipe(output, PIPE_NONE);
igt_output_override_mode(output, NULL);
@@ -464,9 +499,65 @@ static void test_cleanup(data_t *data, enum pipe pipe, igt_output_t *output)
igt_remove_fb(data->drm_fd, &data->fb0);
}
-static bool output_constraint(data_t *data, igt_output_t *output)
+static void
+test_seamless_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
{
- drmModeModeInfo mode;
+ uint32_t result;
+ vtest_ns_t vtest_ns;
+ uint64_t rate;
+ bool vrr = vrr_capable(output);
+
+ igt_info("Use HIGH_RR Mode as default (VRR: OFF): ");
+ kmstest_dump_mode(&data->switch_modes[HIGH_RR_MODE]);
+
+ prepare_test(data, output, pipe);
+ vtest_ns = get_test_rate_ns(data->range);
+
+ rate = vtest_ns.max;
+ result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
+ igt_assert_f(result > 75,
+ "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR off threshold not reached, result was %u%%\n",
+ data->range.max, rate, result);
+
+ /* Switch to low rr mode without modeset. */
+ igt_info("Switch to LOW_RR Mode (VRR: %s): ", vrr ? "ON" : "OFF");
+ kmstest_dump_mode(&data->switch_modes[LOW_RR_MODE]);
+ igt_output_override_mode(output, &data->switch_modes[LOW_RR_MODE]);
+ if (vrr)
+ igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, true);
+ igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
+
+ rate = vtest_ns.min;
+ result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
+ igt_assert_f(result > 75,
+ "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold not reached, result was %u%%\n",
+ data->range.min, rate, vrr ? "on" : "off", result);
+
+ /* Switch back to high rr mode without modeset. */
+ igt_info("Switch back to HIGH_RR Mode (VRR: %s): ", vrr ? "ON" : "OFF");
+ kmstest_dump_mode(&data->switch_modes[HIGH_RR_MODE]);
+ igt_output_override_mode(output, &data->switch_modes[HIGH_RR_MODE]);
+ igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
+
+ rate = vtest_ns.mid;
+ result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
+ igt_assert_f(vrr ? (result > 75) : (result < 10),
+ "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold %s, result was %u%%\n",
+ ((data->range.max + data->range.min) / 2), rate,
+ vrr ? "on" : "off", vrr ? "not reached" : "exceeded", result);
+
+ if (vrr) {
+ igt_info("Disable VRR.\n");
+ igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, true);
+ igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
+ }
+}
+
+static bool output_constraint(data_t *data, igt_output_t *output, uint32_t flags)
+{
+ if ((flags & TEST_SEAMLESS_RR) &&
+ output->config.connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+ return false;
/* Reset output */
igt_display_reset(&data->display);
@@ -474,21 +565,35 @@ static bool output_constraint(data_t *data, igt_output_t *output)
/* Capture VRR range */
data->range = get_vrr_range(data, output);
+ /*
+ * FIXME: Read the DRRS capability, currently assuming:
+ * - Panel should contain 2 modes only
+ * - Both modes should have the same resolution but different RR
+ */
+ if (!vrr_capable(output) && output->config.connector->count_modes != 2)
+ return false;
+
/*
* Override mode with max vrefresh.
* - vrr_min range should be less than the override mode vrefresh.
* - Limit the vrr_max range with the override mode vrefresh.
*/
- mode = output_mode_with_maxrate(output, data->range.max);
- if (mode.vrefresh < data->range.min)
+ data->switch_modes[HIGH_RR_MODE] = output_mode_with_maxrate(output, data->range.max);
+ if (data->switch_modes[HIGH_RR_MODE].vrefresh < data->range.min)
return false;
- data->range.max = mode.vrefresh;
+ data->range.max = data->switch_modes[HIGH_RR_MODE].vrefresh;
+ igt_output_override_mode(output, &data->switch_modes[HIGH_RR_MODE]);
- igt_info("Override Mode: ");
- kmstest_dump_mode(&mode);
+ /* Search for a low refresh rate mode. */
+ if (!(flags & TEST_SEAMLESS_RR))
+ return true;
+
+ data->switch_modes[LOW_RR_MODE] = low_rr_mode_with_same_res(output, data->range.min);
+ if (data->switch_modes[LOW_RR_MODE].vrefresh == data->switch_modes[HIGH_RR_MODE].vrefresh)
+ return false;
- igt_output_override_mode(output, &mode);
+ data->range.min = data->switch_modes[LOW_RR_MODE].vrefresh;
return true;
}
@@ -498,6 +603,9 @@ static bool config_constraint(data_t *data, igt_output_t *output, uint32_t flags
if (!has_vrr(output))
return false;
+ if (flags & TEST_SEAMLESS_RR)
+ goto out;
+
/* For Negative tests, panel should be non-vrr. */
if ((flags & TEST_NEGATIVE) && vrr_capable(output))
return false;
@@ -505,7 +613,8 @@ static bool config_constraint(data_t *data, igt_output_t *output, uint32_t flags
if (!(flags & TEST_NEGATIVE) && !vrr_capable(output))
return false;
- if (!output_constraint(data, output))
+out:
+ if (!output_constraint(data, output, flags))
return false;
return true;
@@ -581,6 +690,12 @@ igt_main
igt_subtest_with_dynamic("negative-basic")
run_vrr_test(&data, test_basic, TEST_NEGATIVE);
+ igt_describe("Test to switch RR seamlessly without modeset.");
+ igt_subtest_with_dynamic("seamless-rr-switch") {
+ igt_require_intel(data.drm_fd);
+ run_vrr_test(&data, test_seamless_rr_basic, TEST_SEAMLESS_RR);
+ }
+
igt_fixture {
igt_display_fini(&data.display);
drm_close_driver(data.drm_fd);
--
2.40.0
More information about the igt-dev
mailing list