[igt-dev] [PATCH i-g-t 8/9] lib/kunit: Fetch a list of test cases in advance
Kamil Konieczny
kamil.konieczny at linux.intel.com
Thu Oct 5 21:28:44 UTC 2023
Hi Janusz,
On 2023-10-03 at 11:10:53 +0200, Janusz Krzysztofik wrote:
> Recent improvements to the kernel kunit framework allow us to obtain a
> list of test cases provided by a kunit test module without actually
> running them. Use that feature to get a list of expected test cases
> before we enter a loop around igt_dynamic(). Once done, enter the
> igt_dynamic() section for each consecutive test case immediately, even
> before first line of a related KTAP report appears, then look for a result
> from that test case. That should make our IGT results output still better
> synchronized with related kernel messages.
>
> The list of test cases provided by a kunit test module can be obtained by
> loading the kunit base module with specific options, then loading the test
> module. For that to be possible, take care of unloading the kunit base
> module before each kunit subtest (I was wrong when in one of my previous
> commit messages I suggested that on final unload of a kunit test module
> the kunit base module is unloaded automatically as its dependency,
> however, that didn't matter before, then no separate fix was required).
> Since that module can then be left loaded with non-default options if an
> error occurs, unload it explicitly before returning from igt_kunit().
>
> There are two possible ways of getting a list of test cases: by loading
> the base kunit module with action=list module option, or by filtering
> out all test cases from being executed while asking for SKIP results from
> those filtered out. Since the latter provides regular KTAP report that we
> can alredy parse perfectly, use it instead of trying to identify an
----- ^^^^^^
s/alredy/already/
> unstructured list of test cases of unknown length submitted by the former.
>
> If an IGT test that calls igt_kunit() provides a subtest name then use
> that name to filter out potential test cases that don't belong to the
> named test suite from the list.
>
> To avoid loading any modules if no subtest is going to be executed (e.g.,
> if a nonexistent subtest has been requested), load the kunit modules in
> list mode from inside the igt_subtest_with_dynamic() section. In order to
> be free to skip the whole subtest on unmet requirements that need to be
> verified after that list has been already populated, clean it up from a
> follow up igt_fixture section.
>
> Since we start reading the list of test cases from /dev/kmsg only after
> the kunit test module is loaded successfully in list only mode, don't
> synchronize reads with potential modprobe breakage in that case, unlike we
> still do later when parsing KTAP results in parallel to loading the test
> module in normal (execute) mode.
>
> Since we neither fetch KTAP results before entering igt_dynamic section
> nor even return an error from KTAP result fetch attempts immediately on
> modprobe error or kernel taint, break the loop of dynamic sub-subtests
> explicitly as soon as one of those conditions is detected.
Could you split this patch into two, one with reading names and rest
with modprobe error or kernel taint detection?
> Also, don't
> force IGT SKIP result from the subtest if KTAP parsing hasn't completed.
> That's perfectly legitimate since we no longer iterate over KTAP results,
> only over a list of test cases obtained in advance, then we stop parsing
> KTAP report as soon as we get a result from the last test case from the
> list.
>
> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik at linux.intel.com>
> ---
> lib/igt_kmod.c | 217 +++++++++++++++++++++++++++++++++++--------------
> 1 file changed, 157 insertions(+), 60 deletions(-)
>
> diff --git a/lib/igt_kmod.c b/lib/igt_kmod.c
> index 387efbb59f..4fba77ead4 100644
> --- a/lib/igt_kmod.c
> +++ b/lib/igt_kmod.c
> @@ -802,34 +802,36 @@ static int kunit_kmsg_result_get(struct igt_list_head *results,
> if (igt_debug_on(igt_kernel_tainted(&taints)))
> return -ENOTRECOVERABLE;
>
> - err = igt_debug_on(sigaction(SIGCHLD, &sigchld, saved));
> - if (err == -1)
> - return -errno;
> - else if (unlikely(err))
> - return err;
> -
> - err = pthread_mutex_lock(&modprobe->lock);
> - switch (err) {
> - case EOWNERDEAD:
> - /* leave the mutex unrecoverable */
> - igt_debug_on(pthread_mutex_unlock(&modprobe->lock));
> - __attribute__ ((fallthrough));
> - case ENOTRECOVERABLE:
> - igt_debug_on(sigaction(SIGCHLD, saved, NULL));
> - if (igt_debug_on(modprobe->err))
> - return modprobe->err;
> - break;
> - case 0:
> - break;
> - default:
> - igt_debug("pthread_mutex_lock() error: %d\n", err);
> - igt_debug_on(sigaction(SIGCHLD, saved, NULL));
> - return -err;
> + if (modprobe) {
> + err = igt_debug_on(sigaction(SIGCHLD, &sigchld, saved));
> + if (err == -1)
> + return -errno;
> + else if (unlikely(err))
> + return err;
> +
> + err = pthread_mutex_lock(&modprobe->lock);
> + switch (err) {
> + case EOWNERDEAD:
> + /* leave the mutex unrecoverable */
> + igt_debug_on(pthread_mutex_unlock(&modprobe->lock));
> + __attribute__ ((fallthrough));
> + case ENOTRECOVERABLE:
> + igt_debug_on(sigaction(SIGCHLD, saved, NULL));
> + if (igt_debug_on(modprobe->err))
> + return modprobe->err;
> + break;
> + case 0:
> + break;
> + default:
> + igt_debug("pthread_mutex_lock() error: %d\n", err);
> + igt_debug_on(sigaction(SIGCHLD, saved, NULL));
> + return -err;
> + }
> }
>
> ret = read(fd, record, BUF_LEN);
>
> - if (!err) {
> + if (modprobe && !err) {
> igt_debug_on(pthread_mutex_unlock(&modprobe->lock));
> igt_debug_on(sigaction(SIGCHLD, saved, NULL));
> }
> @@ -885,17 +887,15 @@ static void kunit_result_free(struct igt_ktap_result **r,
> *r = NULL;
> }
>
> -static void
> -__igt_kunit(struct igt_ktest *tst, const char *name, const char *opts)
> +static void kunit_get_tests(struct igt_list_head *tests,
> + struct igt_ktest *tst,
> + const char *filter,
> + const char *opts)
> {
> - struct modprobe_data modprobe = { pthread_self(), tst->kmod, opts, 0, };
> char *suite_name = NULL, *case_name = NULL;
> struct igt_ktap_result *r, *rn;
> struct igt_ktap_results *ktap;
> - pthread_mutexattr_t attr;
> - IGT_LIST_HEAD(results);
> - unsigned long taints;
> - int flags, ret;
> + int flags, err;
>
> igt_skip_on_f(tst->kmsg < 0, "Could not open /dev/kmsg\n");
>
> @@ -905,6 +905,63 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts)
>
> igt_skip_on(lseek(tst->kmsg, 0, SEEK_END) < 0);
>
> + /*
> + * To get a list of test cases provided by a kunit test module, ask the
> + * generic kunit module to respond with SKIP result for each test found.
> + * We could also use action=list kunit parameter to get the listing,
> + * however, parsing a KTAP report -- something that we alredy can do
--------------------------------------------------------------^
Same here.
Regards,
Kamil
> + * perfectly -- seems to be more safe than extracting a test case list
> + * of unknown length from /dev/kmsg.
> + */
> + igt_skip_on(igt_kmod_load("kunit", "filter=module=none filter_action=skip"));
> + igt_skip_on(modprobe(tst->kmod, opts));
> +
> + ktap = igt_ktap_alloc(tests);
> + igt_require(ktap);
> +
> + do {
> + err = kunit_kmsg_result_get(tests, NULL, tst->kmsg, ktap);
> + if (err && !igt_debug_on(err != -EINPROGRESS)) {
> + r = igt_list_last_entry(tests, r, link);
> +
> + if (igt_debug_on(r->code != IGT_EXIT_SKIP))
> + err = r->code ?: -EPROTO;
> + }
> +
> + } while (err == -EINPROGRESS);
> +
> + igt_ktap_free(ktap);
> +
> + if (err || filter) {
> + igt_list_for_each_entry_safe(r, rn, tests, link) {
> + if (err || strcmp(r->suite_name, filter))
> + kunit_result_free(&r, &case_name, &suite_name);
> + }
> + }
> +
> + igt_skip_on(kmod_module_remove_module(tst->kmod, KMOD_REMOVE_FORCE));
> + igt_skip_on(igt_kmod_unload("kunit", KMOD_REMOVE_FORCE));
> +
> + igt_skip_on_f(err,
> + "KTAP parser failed while getting a list of test cases\n");
> +}
> +
> +static void __igt_kunit(struct igt_ktest *tst,
> + const char *name,
> + const char *opts,
> + struct igt_list_head *tests)
> +{
> + struct modprobe_data modprobe = { pthread_self(), tst->kmod, opts, 0, };
> + char *suite_name = NULL, *case_name = NULL;
> + struct igt_ktap_result *t, *r = NULL, *rn;
> + struct igt_ktap_results *ktap;
> + pthread_mutexattr_t attr;
> + IGT_LIST_HEAD(results);
> + int ret = -EINPROGRESS;
> + unsigned long taints;
> +
> + igt_skip_on(lseek(tst->kmsg, 0, SEEK_END) < 0);
> +
> igt_skip_on(pthread_mutexattr_init(&attr));
> igt_skip_on(pthread_mutexattr_setrobust(&attr, PTHREAD_MUTEX_ROBUST));
> igt_skip_on(pthread_mutex_init(&modprobe.lock, &attr));
> @@ -918,37 +975,50 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts)
> igt_skip("Failed to create a modprobe thread\n");
> }
>
> - do {
> - ret = kunit_kmsg_result_get(&results, &modprobe,
> - tst->kmsg, ktap);
> - if (igt_debug_on(ret && ret != -EINPROGRESS))
> - break;
> -
> - if (igt_debug_on(igt_list_empty(&results)))
> - break;
> -
> - r = igt_list_first_entry(&results, r, link);
> -
> + igt_list_for_each_entry(t, tests, link) {
> igt_dynamic_f("%s%s%s",
> - strcmp(r->suite_name, name) ? r->suite_name : "",
> - strcmp(r->suite_name, name) ? "-" : "",
> - r->case_name) {
> + strcmp(t->suite_name, name) ? t->suite_name : "",
> + strcmp(t->suite_name, name) ? "-" : "",
> + t->case_name) {
> + if (!r) {
> + if (igt_list_empty(&results)) {
> + igt_assert_eq(ret, -EINPROGRESS);
> + ret = kunit_kmsg_result_get(&results,
> + &modprobe,
> + tst->kmsg,
> + ktap);
> + igt_fail_on(igt_list_empty(&results));
> + }
>
> - if (r->code == IGT_EXIT_INVALID) {
> - /* parametrized test case, get actual result */
> - kunit_result_free(&r, &suite_name, &case_name);
> + r = igt_list_first_entry(&results, r, link);
> + }
>
> - igt_assert(igt_list_empty(&results));
> + while (igt_debug_on_f(strcmp(r->suite_name, t->suite_name),
> + "suite_name expected: %s, got: %s\n",
> + t->suite_name, r->suite_name) ||
> + igt_debug_on_f(strcmp(r->case_name, t->case_name),
> + "case_name expected: %s, got: %s\n",
> + t->case_name, r->case_name) ||
> + r->code == IGT_EXIT_INVALID) {
>
> - ret = kunit_kmsg_result_get(&results, &modprobe,
> - tst->kmsg, ktap);
> - if (ret != -EINPROGRESS)
> - igt_fail_on(ret);
> + int code = r->code;
>
> - igt_fail_on(igt_list_empty(&results));
> + kunit_result_free(&r, &suite_name, &case_name);
> + if (igt_list_empty(&results)) {
> + igt_assert_eq(ret, -EINPROGRESS);
> + ret = kunit_kmsg_result_get(&results,
> + &modprobe,
> + tst->kmsg,
> + ktap);
> + igt_fail_on(igt_list_empty(&results));
> + }
>
> r = igt_list_first_entry(&results, r, link);
>
> + if (code != IGT_EXIT_INVALID)
> + continue;
> +
> + /* result from parametrized test case */
> igt_fail_on_f(strcmp(r->suite_name, suite_name),
> "suite_name expected: %s, got: %s\n",
> suite_name, r->suite_name);
> @@ -995,7 +1065,9 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts)
>
> kunit_result_free(&r, &suite_name, &case_name);
>
> - } while (ret == -EINPROGRESS);
> + if (modprobe.err || igt_kernel_tainted(&taints))
> + break;
> + }
>
> igt_list_for_each_entry_safe(r, rn, &results, link)
> kunit_result_free(&r, &suite_name, &case_name);
> @@ -1025,7 +1097,8 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts)
>
> igt_skip_on(modprobe.err);
> igt_skip_on(igt_kernel_tainted(&taints));
> - igt_skip_on_f(ret, "KTAP parser failed\n");
> + if (ret != -EINPROGRESS)
> + igt_skip_on_f(ret, "KTAP parser failed\n");
> }
>
> /**
> @@ -1039,7 +1112,8 @@ __igt_kunit(struct igt_ktest *tst, const char *name, const char *opts)
> void igt_kunit(const char *module_name, const char *name, const char *opts)
> {
> struct igt_ktest tst = { .kmsg = -1, };
> -
> + const char *filter = name;
> + IGT_LIST_HEAD(tests);
>
> /*
> * If the caller (an IGT test) provides no subtest name then we
> @@ -1064,6 +1138,15 @@ void igt_kunit(const char *module_name, const char *name, const char *opts)
>
> igt_skip_on(igt_ktest_init(&tst, module_name));
> igt_skip_on(igt_ktest_begin(&tst));
> +
> + /*
> + * Since we need to load kunit base module with specific
> + * options in order to get a list of test cases, make
> + * sure that the module is not loaded. However, since
> + * unload may fail if kunit base module is not loaded,
> + * ignore any failures, we'll fail later if still loaded.
> + */
> + igt_ignore_warn(igt_kmod_unload("kunit", KMOD_REMOVE_FORCE));
> }
>
> /*
> @@ -1073,11 +1156,25 @@ void igt_kunit(const char *module_name, const char *name, const char *opts)
> * proper namespace for dynamic subtests, with is required for CI
> * and for documentation.
> */
> - igt_subtest_with_dynamic(name)
> - __igt_kunit(&tst, name, opts);
> + igt_subtest_with_dynamic(name) {
> + kunit_get_tests(&tests, &tst, filter, opts);
> + igt_skip_on(igt_list_empty(&tests));
> +
> + __igt_kunit(&tst, name, opts, &tests);
> + }
> +
> + igt_fixture {
> + char *suite_name = NULL, *case_name = NULL;
> + struct igt_ktap_result *t, *tn;
> +
> + igt_list_for_each_entry_safe(t, tn, &tests, link)
> + kunit_result_free(&t, &suite_name, &case_name);
> + free(case_name);
> + free(suite_name);
>
> - igt_fixture
> igt_ktest_end(&tst);
> + igt_debug_on(igt_kmod_unload("kunit", KMOD_REMOVE_FORCE));
> + }
>
> igt_ktest_fini(&tst);
> }
> --
> 2.42.0
>
More information about the igt-dev
mailing list