[igt-dev] [i-g-t V2 1/5] tests/kms/testplan: Move testplan documentation to beginning of the file
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Thu Oct 19 09:34:13 UTC 2023
To maintain the uniformness, move testplan documentation
to beginning of the file.
Move TEST block to before the #includes, and SUBTEST block
to after the #includes.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/chamelium/kms_chamelium_audio.c | 74 +-
tests/chamelium/kms_chamelium_color.c | 59 +-
tests/chamelium/kms_chamelium_edid.c | 199 +-
tests/chamelium/kms_chamelium_frames.c | 208 +-
tests/chamelium/kms_chamelium_hpd.c | 425 +-
tests/intel/kms_big_fb.c | 320 +-
tests/intel/kms_big_joiner.c | 50 +-
tests/intel/kms_busy.c | 108 +-
tests/intel/kms_ccs.c | 1 +
tests/intel/kms_cdclk.c | 49 +-
tests/intel/kms_dirtyfb.c | 16 +-
tests/intel/kms_draw_crc.c | 81 +-
tests/intel/kms_dsc.c | 1 +
tests/intel/kms_fb_coherency.c | 21 +-
tests/intel/kms_fbcon_fbt.c | 12 +-
tests/intel/kms_fence_pin_leak.c | 11 +-
tests/intel/kms_flip_scaled_crc.c | 1 +
tests/intel/kms_flip_tiling.c | 11 +-
tests/intel/kms_frontbuffer_tracking.c | 7217 ++++++++++++------------
tests/intel/kms_legacy_colorkey.c | 10 +-
tests/intel/kms_mmap_write_crc.c | 13 +-
tests/intel/kms_pipe_b_c_ivb.c | 7 +-
tests/intel/kms_pm_backlight.c | 11 +-
tests/intel/kms_pm_dc.c | 10 +-
tests/intel/kms_pm_lpsp.c | 11 +-
tests/intel/kms_psr.c | 52 +-
tests/intel/kms_psr2_sf.c | 13 +-
tests/intel/kms_psr2_su.c | 11 +-
tests/intel/kms_psr_stress_test.c | 10 +-
tests/intel/kms_pwrite_crc.c | 10 +-
tests/kms_3d.c | 9 +-
tests/kms_addfb_basic.c | 411 +-
tests/kms_async_flips.c | 100 +-
tests/kms_atomic.c | 176 +-
tests/kms_atomic_interruptible.c | 100 +-
tests/kms_atomic_transition.c | 179 +-
tests/kms_bw.c | 11 +-
tests/kms_color.c | 140 +-
tests/kms_concurrent.c | 9 +-
tests/kms_content_protection.c | 141 +-
tests/kms_cursor_crc.c | 141 +-
tests/kms_cursor_edge_walk.c | 13 +-
tests/kms_cursor_legacy.c | 493 +-
tests/kms_display_modes.c | 37 +-
tests/kms_dither.c | 32 +-
tests/kms_dp_aux_dev.c | 11 +-
tests/kms_feature_discovery.c | 22 +-
tests/kms_flip.c | 93 +-
tests/kms_flip_event_leak.c | 10 +-
tests/kms_force_connector_basic.c | 62 +-
tests/kms_getfb.c | 161 +-
tests/kms_hdmi_inject.c | 14 +-
tests/kms_hdr.c | 127 +-
tests/kms_invalid_mode.c | 1 +
tests/kms_multipipe_modeset.c | 7 +-
tests/kms_panel_fitting.c | 11 +-
tests/kms_pipe_crc_basic.c | 149 +-
tests/kms_plane.c | 131 +-
tests/kms_plane_alpha_blend.c | 94 +-
tests/kms_plane_cursor.c | 8 +-
tests/kms_plane_lowres.c | 50 +-
tests/kms_plane_multiple.c | 54 +-
tests/kms_plane_scaling.c | 476 +-
tests/kms_prime.c | 11 +-
tests/kms_prop_blob.c | 96 +-
tests/kms_properties.c | 39 +-
tests/kms_rmfb.c | 13 +-
tests/kms_rotation_crc.c | 237 +-
tests/kms_scaling_modes.c | 7 +-
tests/kms_selftest.c | 9 +-
tests/kms_sequence.c | 60 +-
tests/kms_setmode.c | 14 +-
tests/kms_sysfs_edid_timing.c | 12 +-
tests/kms_tiled_display.c | 1 +
tests/kms_tv_load_detect.c | 7 +-
tests/kms_universal_plane.c | 14 +-
tests/kms_vblank.c | 31 +-
tests/kms_vrr.c | 11 +-
tests/kms_writeback.c | 17 +-
tests/testdisplay.c | 12 +-
80 files changed, 6620 insertions(+), 6466 deletions(-)
diff --git a/tests/chamelium/kms_chamelium_audio.c b/tests/chamelium/kms_chamelium_audio.c
index 34ba0cb64..f86610861 100644
--- a/tests/chamelium/kms_chamelium_audio.c
+++ b/tests/chamelium/kms_chamelium_audio.c
@@ -24,14 +24,48 @@
* Lyude Paul <lyude at redhat.com>
*/
+/**
+ * TEST: kms chamelium audio
+ * Category: Display
+ * Description: Testing Audio with a Chamelium board
+ */
+
#include "igt_eld.h"
#include "igt_infoframe.h"
#include "kms_chamelium_helper.h"
/**
- * TEST: kms chamelium audio
- * Category: Display
- * Description: Testing Audio with a Chamelium board
+ * SUBTEST: dp-audio
+ * Description: Playback various audio signals with various audio formats/rates,
+ * capture them and check they are correct
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, dp_audio
+ * Mega feature: Audio, DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-audio
+ * Description: Playback various audio signals with various audio formats/rates,
+ * capture them and check they are correct
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hdmi_audio
+ * Mega feature: Audio, HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-audio-edid
+ * Description: Plug a connector with an EDID suitable for audio, check ALSA's
+ * EDID-Like Data reports the correct audio parameters
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, dp_audio
+ * Mega feature: Audio, DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-audio-edid
+ * Description: Plug a connector with an EDID suitable for audio, check ALSA's
+ * EDID-Like Data reports the correct audio parameters
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hdmi_audio
+ * Mega feature: Audio, HDMI
+ * Test category: functionality test
*/
/* Playback parameters control the audio signal we synthesize and send */
@@ -675,23 +709,6 @@ static bool check_audio_configuration(struct alsa *alsa,
return true;
}
-/**
- * SUBTEST: dp-audio
- * Description: Playback various audio signals with various audio formats/rates,
- * capture them and check they are correct
- * Functionality: chamelium, dp_audio
- * Mega feature: Audio, DP
- * Test category: functionality test
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-audio
- * Description: Playback various audio signals with various audio formats/rates,
- * capture them and check they are correct
- * Functionality: chamelium, hdmi_audio
- * Mega feature: Audio, HDMI
- * Test category: functionality test
- * Driver requirement: i915, xe
- */
static const char test_display_audio_desc[] =
"Playback various audio signals with various audio formats/rates, "
"capture them and check they are correct";
@@ -786,23 +803,6 @@ static void test_display_audio(chamelium_data_t *data,
free(alsa);
}
-/**
- * SUBTEST: dp-audio-edid
- * Description: Plug a connector with an EDID suitable for audio, check ALSA's
- * EDID-Like Data reports the correct audio parameters
- * Functionality: chamelium, dp_audio
- * Mega feature: Audio, DP
- * Test category: functionality test
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-audio-edid
- * Description: Plug a connector with an EDID suitable for audio, check ALSA's
- * EDID-Like Data reports the correct audio parameters
- * Functionality: chamelium, hdmi_audio
- * Mega feature: Audio, HDMI
- * Test category: functionality test
- * Driver requirement: i915, xe
- */
static const char test_display_audio_edid_desc[] =
"Plug a connector with an EDID suitable for audio, check ALSA's "
"EDID-Like Data reports the correct audio parameters";
diff --git a/tests/chamelium/kms_chamelium_color.c b/tests/chamelium/kms_chamelium_color.c
index 0a9788214..6123e8a5f 100644
--- a/tests/chamelium/kms_chamelium_color.c
+++ b/tests/chamelium/kms_chamelium_color.c
@@ -30,16 +30,43 @@
#include "kms_color_helper.h"
-IGT_TEST_DESCRIPTION("Test Color Features at Pipe level using Chamelium to verify instead of CRC");
-
/**
* SUBTEST: degamma
* Description: Verify that degamma LUT transformation works correctly
+ * Driver requirement: i915, xe
* Functionality: chamelium, colorspace
* Mega feature: Color mgmt
* Test category: functionality test
+ *
+ * SUBTEST: gamma
+ * Description: Verify that gamma LUT transformation works correctly
* Driver requirement: i915, xe
+ * Functionality: chamelium, colorspace
+ * Mega feature: Color mgmt
+ * Test category: functionality test
+ *
+ * SUBTEST: ctm-%s
+ * Description: Check the color transformation %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, colorspace
+ * Mega feature: Color mgmt
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @0-25: for 0.25 transparancy
+ * @0-50: for 0.50 transparancy
+ * @0-75: for 0.75 transparancy
+ * @blue-to-red: from blue to red
+ * @green-to-red: from green to red
+ * @limited-range: with identity matrix
+ * @max: for max transparancy
+ * @negative: for negative transparancy
+ * @red-to-blue: from red to blue
*/
+
+IGT_TEST_DESCRIPTION("Test Color Features at Pipe level using Chamelium to verify instead of CRC");
+
/*
* Draw 3 gradient rectangles in red, green and blue, with a maxed out
* degamma LUT and verify we have the same frame dump as drawing solid color
@@ -129,14 +156,6 @@ static bool test_pipe_degamma(data_t *data,
return ret;
}
-/**
- * SUBTEST: gamma
- * Description: Verify that gamma LUT transformation works correctly
- * Functionality: chamelium, colorspace
- * Mega feature: Color mgmt
- * Test category: functionality test
- * Driver requirement: i915, xe
- */
/*
* Draw 3 gradient rectangles in red, green and blue, with a maxed out
* gamma LUT and verify we have the same frame dump as drawing solid
@@ -487,26 +506,6 @@ run_gamma_degamma_tests_for_pipe(data_t *data, enum pipe p,
igt_assert(test_t(data, data->primary, data->ports[port_idx]));
}
-/**
- * SUBTEST: ctm-%s
- * Description: Check the color transformation %arg[1]
- * Functionality: chamelium, colorspace
- * Mega feature: Color mgmt
- * Test category: functionality test
- * Driver requirement: i915, xe
- *
- * arg[1]:
- *
- * @0-25: for 0.25 transparancy
- * @0-50: for 0.50 transparancy
- * @0-75: for 0.75 transparancy
- * @blue-to-red: from blue to red
- * @green-to-red: from green to red
- * @limited-range: with identity matrix
- * @max: for max transparancy
- * @negative: for negative transparancy
- * @red-to-blue: from red to blue
- */
static void
run_ctm_tests_for_pipe(data_t *data, enum pipe p,
color_t *expected_colors,
diff --git a/tests/chamelium/kms_chamelium_edid.c b/tests/chamelium/kms_chamelium_edid.c
index de8e51a04..f3f0b1e50 100644
--- a/tests/chamelium/kms_chamelium_edid.c
+++ b/tests/chamelium/kms_chamelium_edid.c
@@ -48,6 +48,106 @@
#include "monitor_edids/hdmi_edids.h"
#include "monitor_edids/monitor_edids_helper.h"
+/**
+ * SUBTEST: dp-edid-read
+ * Description: Make sure the EDID exposed by KMS is the same as the screen's
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: chamelium, dp_edid
+ * Mega feature: DP
+ *
+ * SUBTEST: hdmi-edid-read
+ * Description: Make sure the EDID exposed by KMS is the same as the screen's
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: chamelium, hdmi_edid
+ * Mega feature: HDMI
+ *
+ * SUBTEST: vga-edid-read
+ * Description: Make sure the EDID exposed by KMS is the same as the screen's
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: chamelium, vga_edid
+ * Mega feature: VGA
+ *
+ * SUBTEST: dp-edid-resolution-list
+ * Description: Get an EDID with many modes of different configurations, set
+ * them on the screen and check the screen resolution matches the
+ * mode resolution.
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, dp_edid
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-mode-timings
+ * Description: For each mode of the IGT base EDID, perform a modeset and check
+ * the mode detected by the Chamelium receiver matches the mode we
+ * set
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, dp_edid
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-mode-timings
+ * Description: For each mode of the IGT base EDID, perform a modeset and check
+ * the mode detected by the Chamelium receiver matches the mode we
+ * set
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, dp_edid
+ * Mega feature: DP
+ * Test category: functionality test
+ */
+
+/**
+ * SUBTEST: dp-edid-stress-resolution-%s
+ * Description: Stress test the DUT by testing multiple EDIDs, one right after
+ * the other, and ensure their validity by check the real screen
+ * resolution vs the advertised mode (%arg[1]) resolution.
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, dp_edid
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-edid-stress-resolution-%s
+ * Description: Stress test the DUT by testing multiple EDIDs, one right after
+ * the other, and ensure their validity by check the real screen
+ * resolution vs the advertised mode (%arg[1]) resolution.
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hdmi_edid
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4k: 4K
+ * @non-4k: Non 4K
+ */
+
+/**
+ * SUBTEST: dp-edid-change-during-%s
+ * Description: Simulate a screen being unplugged and another screen being
+ * plugged during suspend, check that a uevent is sent and
+ * connector status is updated during %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, dp_edid
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-edid-change-during-%s
+ * Description: Simulate a screen being unplugged and another screen being
+ * plugged during suspend, check that a uevent is sent and
+ * connector status is updated during %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, dp_edid
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @hibernate: hibernation
+ * @suspend: suspend
+ */
+
#define MODE_CLOCK_ACCURACY 0.05 /* 5% */
static void get_connectors_link_status_failed(chamelium_data_t *data,
@@ -145,28 +245,6 @@ static void check_mode(struct chamelium *chamelium, struct chamelium_port *port,
igt_assert(video_params.vsync_polarity == mode_vsync_polarity);
}
-/**
- * SUBTEST: dp-edid-read
- * Description: Make sure the EDID exposed by KMS is the same as the screen's
- * Test category: functionality test
- * Functionality: chamelium, dp_edid
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-edid-read
- * Description: Make sure the EDID exposed by KMS is the same as the screen's
- * Test category: functionality test
- * Functionality: chamelium, hdmi_edid
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * SUBTEST: vga-edid-read
- * Description: Make sure the EDID exposed by KMS is the same as the screen's
- * Test category: functionality test
- * Functionality: chamelium, vga_edid
- * Mega feature: VGA
- * Driver requirement: i915, xe
- */
static const char igt_custom_edid_type_read_desc[] =
"Make sure the EDID exposed by KMS is the same as the screen's";
static void igt_custom_edid_type_read(chamelium_data_t *data,
@@ -206,30 +284,6 @@ static void igt_custom_edid_type_read(chamelium_data_t *data,
drmModeFreeConnector(connector);
}
-/**
- * SUBTEST: dp-edid-stress-resolution-%s
- * Description: Stress test the DUT by testing multiple EDIDs, one right after
- * the other, and ensure their validity by check the real screen
- * resolution vs the advertised mode (%arg[1]) resolution.
- * Test category: functionality test
- * Functionality: chamelium, dp_edid
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-edid-stress-resolution-%s
- * Description: Stress test the DUT by testing multiple EDIDs, one right after
- * the other, and ensure their validity by check the real screen
- * resolution vs the advertised mode (%arg[1]) resolution.
- * Test category: functionality test
- * Functionality: chamelium, hdmi_edid
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * arg[1]:
- *
- * @4k: 4K
- * @non-4k: Non 4K
- */
static const char igt_edid_stress_resolution_desc[] =
"Stress test the DUT by testing multiple EDIDs, one right after the other, "
"and ensure their validity by check the real screen resolution vs the "
@@ -299,16 +353,6 @@ static void edid_stress_resolution(chamelium_data_t *data,
data->ports, data->port_count);
}
-/**
- * SUBTEST: dp-edid-resolution-list
- * Description: Get an EDID with many modes of different configurations, set
- * them on the screen and check the screen resolution matches the
- * mode resolution.
- * Test category: functionality test
- * Functionality: chamelium, dp_edid
- * Mega feature: DP
- * Driver requirement: i915, xe
- */
static const char igt_edid_resolution_list_desc[] =
"Get an EDID with many modes of different configurations, set them on the screen and check the"
" screen resolution matches the mode resolution.";
@@ -372,30 +416,6 @@ static void edid_resolution_list(chamelium_data_t *data,
drmModeFreeConnector(connector);
}
-/**
- * SUBTEST: dp-edid-change-during-%s
- * Description: Simulate a screen being unplugged and another screen being
- * plugged during suspend, check that a uevent is sent and
- * connector status is updated during %arg[1]
- * Test category: functionality test
- * Functionality: chamelium, dp_edid
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-edid-change-during-%s
- * Description: Simulate a screen being unplugged and another screen being
- * plugged during suspend, check that a uevent is sent and
- * connector status is updated during %arg[1]
- * Test category: functionality test
- * Functionality: chamelium, dp_edid
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * arg[1]:
- *
- * @hibernate: hibernation
- * @suspend: suspend
- */
static const char test_suspend_resume_edid_change_desc[] =
"Simulate a screen being unplugged and another screen being plugged "
"during suspend, check that a uevent is sent and connector status is "
@@ -448,25 +468,6 @@ static void test_suspend_resume_edid_change(chamelium_data_t *data,
link_status_failed[1][p]);
}
-/**
- * SUBTEST: dp-mode-timings
- * Description: For each mode of the IGT base EDID, perform a modeset and check
- * the mode detected by the Chamelium receiver matches the mode we
- * set
- * Test category: functionality test
- * Functionality: chamelium, dp_edid
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-mode-timings
- * Description: For each mode of the IGT base EDID, perform a modeset and check
- * the mode detected by the Chamelium receiver matches the mode we
- * set
- * Test category: functionality test
- * Functionality: chamelium, dp_edid
- * Mega feature: DP
- * Driver requirement: i915, xe
- */
static const char test_mode_timings_desc[] =
"For each mode of the IGT base EDID, perform a modeset and check the "
"mode detected by the Chamelium receiver matches the mode we set";
diff --git a/tests/chamelium/kms_chamelium_frames.c b/tests/chamelium/kms_chamelium_frames.c
index a313cd433..490ab3fe9 100644
--- a/tests/chamelium/kms_chamelium_frames.c
+++ b/tests/chamelium/kms_chamelium_frames.c
@@ -29,10 +29,114 @@
* Category: Display
* Description: Tests requiring a Chamelium board
*/
+
#include "igt_eld.h"
#include "igt_infoframe.h"
#include "kms_chamelium_helper.h"
+/**
+ * SUBTEST: dp-crc-fast
+ * Description: Pick the first mode of the IGT base EDID, display and capture
+ * a few frames, then check captured frames are correct
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-crc-fast
+ * Description: Pick the first mode of the IGT base EDID, display and capture
+ * a few frames, then check captured frames are correct
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-%s-formats
+ * Description: Pick the first mode of the IGT base EDID, display and capture a
+ * few frames, then check captured frames are correct
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @crc-nonplanar: CRC with non planar formats
+ * @cmp-planar: Compare with planar formats
+ */
+
+/**
+ * SUBTEST: vga-frame-dump
+ * Description: For each mode of the IGT base EDID, display and capture a few
+ * frames, then check captured frames are correct
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: VGA
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-crc-%s
+ * Description: For each mode of the IGT base EDID, display and capture a %arg[1]
+ * frame(s), then check captured frame(s) are correct
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-crc-%s
+ * Description: For each mode of the IGT base EDID, display and capture a %arg[1]
+ * frame(s), then check captured frame(s) are correct
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @single: single
+ * @multiple: multiple
+ */
+
+/**
+ * SUBTEST: dp-frame-dump
+ * Description: For each mode of the IGT base EDID, display and capture a few
+ * frames, then download the captured frames and compare them
+ * bit-by-bit to the sent ones
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-frame-dump
+ * Description: For each mode of the IGT base EDID, display and capture a few
+ * frames, then download the captured frames and compare them
+ * bit-by-bit to the sent ones
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-aspect-ratio
+ * Description: Pick a mode with a picture aspect-ratio, capture AVI InfoFrames
+ * and check they include the relevant fields
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-%s-planes-random
+ * Description: Setup a few overlay planes with random parameters, capture the
+ * frame and check it matches the expected output
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, frame_integrity
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @crc: CRC check
+ * @cmp: Compare
+ */
+
#define connector_dynamic_subtest(name__, type__) \
igt_subtest_with_dynamic(name__) \
for_each_port(p, port) if (chamelium_port_get_type(port) == \
@@ -539,38 +643,6 @@ static void prepare_randomized_plane(chamelium_data_t *data,
igt_remove_fb(data->drm_fd, &pattern_fb);
}
-/**
- * SUBTEST: dp-crc-fast
- * Description: Pick the first mode of the IGT base EDID, display and capture
- * a few frames, then check captured frames are correct
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-crc-fast
- * Description: Pick the first mode of the IGT base EDID, display and capture
- * a few frames, then check captured frames are correct
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- */
-
-/**
- * SUBTEST: hdmi-%s-formats
- * Description: Pick the first mode of the IGT base EDID, display and capture a
- * few frames, then check captured frames are correct
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * arg[1]:
- *
- * @crc-nonplanar: CRC with non planar formats
- * @cmp-planar: Compare with planar formats
- */
static const char test_display_one_mode_desc[] =
"Pick the first mode of the IGT base EDID, display and capture a few "
"frames, then check captured frames are correct";
@@ -607,36 +679,6 @@ static void test_display_one_mode(chamelium_data_t *data,
drmModeFreeConnector(connector);
}
-/**
- * SUBTEST: vga-frame-dump
- * Description: For each mode of the IGT base EDID, display and capture a few
- * frames, then check captured frames are correct
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: VGA
- * Driver requirement: i915, xe
- *
- * SUBTEST: dp-crc-%s
- * Description: For each mode of the IGT base EDID, display and capture a %arg[1]
- * frame(s), then check captured frame(s) are correct
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-crc-%s
- * Description: For each mode of the IGT base EDID, display and capture a %arg[1]
- * frame(s), then check captured frame(s) are correct
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * arg[1]:
- *
- * @single: single
- * @multiple: multiple
- */
static const char test_display_all_modes_desc[] =
"For each mode of the IGT base EDID, display and capture a few "
"frames, then check captured frames are correct";
@@ -695,25 +737,6 @@ static void test_display_all_modes(chamelium_data_t *data,
} while (++i < count_modes);
}
-/**
- * SUBTEST: dp-frame-dump
- * Description: For each mode of the IGT base EDID, display and capture a few
- * frames, then download the captured frames and compare them
- * bit-by-bit to the sent ones
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-frame-dump
- * Description: For each mode of the IGT base EDID, display and capture a few
- * frames, then download the captured frames and compare them
- * bit-by-bit to the sent ones
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- */
static const char test_display_frame_dump_desc[] =
"For each mode of the IGT base EDID, display and capture a few "
"frames, then download the captured frames and compare them "
@@ -782,15 +805,6 @@ static void test_display_frame_dump(chamelium_data_t *data,
} while (++i < count_modes);
}
-/**
- * SUBTEST: hdmi-aspect-ratio
- * Description: Pick a mode with a picture aspect-ratio, capture AVI InfoFrames
- * and check they include the relevant fields
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- */
static const char test_display_aspect_ratio_desc[] =
"Pick a mode with a picture aspect-ratio, capture AVI InfoFrames and "
"check they include the relevant fields";
@@ -871,20 +885,6 @@ static void test_display_aspect_ratio(chamelium_data_t *data,
drmModeFreeConnector(connector);
}
-/**
- * SUBTEST: hdmi-%s-planes-random
- * Description: Setup a few overlay planes with random parameters, capture the
- * frame and check it matches the expected output
- * Test category: functionality test
- * Functionality: chamelium, frame_integrity
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * arg[1]:
- *
- * @crc: CRC check
- * @cmp: Compare
- */
static const char test_display_planes_random_desc[] =
"Setup a few overlay planes with random parameters, capture the frame "
"and check it matches the expected output";
diff --git a/tests/chamelium/kms_chamelium_hpd.c b/tests/chamelium/kms_chamelium_hpd.c
index f7a9422a9..360694c76 100644
--- a/tests/chamelium/kms_chamelium_hpd.c
+++ b/tests/chamelium/kms_chamelium_hpd.c
@@ -32,6 +32,217 @@
#include "kms_chamelium_helper.h"
+/**
+ * SUBTEST: dp-hpd-fast
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-hpd-fast
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: vga-hpd-fast
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: VGA
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-hpd
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-hpd
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: vga-hpd
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: VGA
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-hpd-%s
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-hpd-%s
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: vga-hpd-%s
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: VGA
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @enable-disable-mode: Toggle the mode
+ * @with-enabled-mode: Enabling the mode
+ */
+
+/**
+ * SUBTEST: dp-hpd-for-each-pipe
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug for each pipe with valid output
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-hpd-for-each-pipe
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug for each pipe with valid output
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: vga-hpd-for-each-pipe
+ * Description: Check that we get uevents and updated connector status on
+ * hotplug and unplug for each pipe with valid output
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: VGA
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-hpd-after-hibernate
+ * Description: Toggle HPD during Hibernation, check that uevents are sent and
+ * connector status is updated
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug, hibernation
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-hpd-after-hibernate
+ * Description: Toggle HPD during Hibernation, check that uevents are sent and
+ * connector status is updated
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug, hibernation
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: vga-hpd-after-hibernate
+ * Description: Toggle HPD during Hibernation, check that uevents are sent and
+ * connector status is updated
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug, hibernation
+ * Mega feature: VGA
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-hpd-after-suspend
+ * Description: Toggle HPD during Suspend, check that uevents are sent and
+ * connector status is updated
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug, suspend
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-hpd-after-suspend
+ * Description: Toggle HPD during Suspend, check that uevents are sent and
+ * connector status is updated
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug, suspend
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: vga-hpd-after-suspend
+ * Description: Toggle HPD during Suspend, check that uevents are sent and
+ * connector status is updated
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug, suspend
+ * Mega feature: VGA
+ * Test category: functionality test
+ *
+ * SUBTEST: common-hpd-after-suspend
+ * Description: Toggle HPD during suspend on all connectors, check that uevents
+ * are sent and connector status is updated
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: common-hpd-after-hibernate
+ * Description: Toggle HPD during suspend on all connectors, check that uevents
+ * are sent and connector status is updated
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug, hibernation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: vga-hpd-without-ddc
+ * Description: Disable DDC on a VGA connector, check we still get a uevent on
+ * hotplug
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: VGA
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-hpd-storm
+ * Description: Trigger a series of hotplugs in a very small timeframe to
+ * simulate abad cable, check the kernel falls back to polling
+ * to avoid a hotplug storm
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-hpd-storm
+ * Description: Trigger a series of hotplugs in a very small timeframe to
+ * simulate abad cable, check the kernel falls back to polling
+ * to avoid a hotplug storm
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: HDMI
+ * Test category: functionality test
+ *
+ * SUBTEST: dp-hpd-storm-disable
+ * Description: Disable HPD storm detection, trigger a storm and check the
+ * kernel doesn't detect one
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: DP
+ * Test category: functionality test
+ *
+ * SUBTEST: hdmi-hpd-storm-disable
+ * Description: Disable HPD storm detection, trigger a storm and check the
+ * kernel doesn't detect one
+ * Driver requirement: i915, xe
+ * Functionality: chamelium, hotplug
+ * Mega feature: HDMI
+ * Test category: functionality test
+ */
+
#define HPD_STORM_PULSE_INTERVAL_DP 100 /* ms */
#define HPD_STORM_PULSE_INTERVAL_HDMI 200 /* ms */
@@ -110,84 +321,6 @@ static void try_suspend_resume_hpd(chamelium_data_t *data,
}
}
-/**
- * SUBTEST: dp-hpd-fast
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-hpd-fast
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * SUBTEST: vga-hpd-fast
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: VGA
- * Driver requirement: i915, xe
- *
- * SUBTEST: dp-hpd
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-hpd
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * SUBTEST: vga-hpd
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: VGA
- * Driver requirement: i915, xe
- *
- * SUBTEST: dp-hpd-%s
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-hpd-%s
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * SUBTEST: vga-hpd-%s
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: VGA
- * Driver requirement: i915, xe
- *
- * arg[1]:
- *
- * @enable-disable-mode: Toggle the mode
- * @with-enabled-mode: Enabling the mode
- */
static const char test_basic_hotplug_desc[] =
"Check that we get uevents and updated connector status on "
"hotplug and unplug";
@@ -254,31 +387,6 @@ static void test_hotplug(chamelium_data_t *data, struct chamelium_port *port,
igt_remove_fb(data->drm_fd, &fb);
}
-/**
- * SUBTEST: dp-hpd-for-each-pipe
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug for each pipe with valid output
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-hpd-for-each-pipe
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug for each pipe with valid output
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * SUBTEST: vga-hpd-for-each-pipe
- * Description: Check that we get uevents and updated connector status on
- * hotplug and unplug for each pipe with valid output
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: VGA
- * Driver requirement: i915, xe
- */
static const char test_hotplug_for_each_pipe_desc[] =
"Check that we get uevents and updated connector status on "
"hotplug and unplug for each pipe with valid output";
@@ -324,55 +432,6 @@ static void test_hotplug_for_each_pipe(chamelium_data_t *data,
igt_hpd_storm_reset(data->drm_fd);
}
-/**
- * SUBTEST: dp-hpd-after-hibernate
- * Description: Toggle HPD during Hibernation, check that uevents are sent and
- * connector status is updated
- * Test category: functionality test
- * Functionality: chamelium, hotplug, hibernation
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-hpd-after-hibernate
- * Description: Toggle HPD during Hibernation, check that uevents are sent and
- * connector status is updated
- * Test category: functionality test
- * Functionality: chamelium, hotplug, hibernation
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * SUBTEST: vga-hpd-after-hibernate
- * Description: Toggle HPD during Hibernation, check that uevents are sent and
- * connector status is updated
- * Test category: functionality test
- * Functionality: chamelium, hotplug, hibernation
- * Mega feature: VGA
- * Driver requirement: i915, xe
- *
- * SUBTEST: dp-hpd-after-suspend
- * Description: Toggle HPD during Suspend, check that uevents are sent and
- * connector status is updated
- * Test category: functionality test
- * Functionality: chamelium, hotplug, suspend
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-hpd-after-suspend
- * Description: Toggle HPD during Suspend, check that uevents are sent and
- * connector status is updated
- * Test category: functionality test
- * Functionality: chamelium, hotplug, suspend
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- *
- * SUBTEST: vga-hpd-after-suspend
- * Description: Toggle HPD during Suspend, check that uevents are sent and
- * connector status is updated
- * Test category: functionality test
- * Functionality: chamelium, hotplug, suspend
- * Mega feature: VGA
- * Driver requirement: i915, xe
- */
static const char test_suspend_resume_hpd_desc[] =
"Toggle HPD during suspend, check that uevents are sent and connector "
"status is updated";
@@ -396,23 +455,6 @@ static void test_suspend_resume_hpd(chamelium_data_t *data,
igt_cleanup_uevents(mon);
}
-/**
- * SUBTEST: common-hpd-after-suspend
- * Description: Toggle HPD during suspend on all connectors, check that uevents
- * are sent and connector status is updated
- * Test category: functionality test
- * Functionality: chamelium, hotplug, suspend
- * Mega feature: General Display Features
- * Driver requirement: i915, xe
- *
- * SUBTEST: common-hpd-after-hibernate
- * Description: Toggle HPD during suspend on all connectors, check that uevents
- * are sent and connector status is updated
- * Test category: functionality test
- * Functionality: chamelium, hotplug, hibernation
- * Mega feature: General Display Features
- * Driver requirement: i915, xe
- */
static const char test_suspend_resume_hpd_common_desc[] =
"Toggle HPD during suspend on all connectors, check that uevents are "
"sent and connector status is updated";
@@ -442,15 +484,6 @@ static void test_suspend_resume_hpd_common(chamelium_data_t *data,
igt_cleanup_uevents(mon);
}
-/**
- * SUBTEST: vga-hpd-without-ddc
- * Description: Disable DDC on a VGA connector, check we still get a uevent on
- * hotplug
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: VGA
- * Driver requirement: i915, xe
- */
static const char test_hpd_without_ddc_desc[] =
"Disable DDC on a VGA connector, check we still get a uevent on hotplug";
static void test_hpd_without_ddc(chamelium_data_t *data,
@@ -477,25 +510,6 @@ static void test_hpd_without_ddc(chamelium_data_t *data,
igt_cleanup_uevents(mon);
}
-/**
- * SUBTEST: dp-hpd-storm
- * Description: Trigger a series of hotplugs in a very small timeframe to
- * simulate abad cable, check the kernel falls back to polling
- * to avoid a hotplug storm
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-hpd-storm
- * Description: Trigger a series of hotplugs in a very small timeframe to
- * simulate abad cable, check the kernel falls back to polling
- * to avoid a hotplug storm
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- */
static const char test_hpd_storm_detect_desc[] =
"Trigger a series of hotplugs in a very small timeframe to simulate a"
"bad cable, check the kernel falls back to polling to avoid a hotplug "
@@ -530,23 +544,6 @@ static void test_hpd_storm_detect(chamelium_data_t *data,
igt_hpd_storm_reset(data->drm_fd);
}
-/**
- * SUBTEST: dp-hpd-storm-disable
- * Description: Disable HPD storm detection, trigger a storm and check the
- * kernel doesn't detect one
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: DP
- * Driver requirement: i915, xe
- *
- * SUBTEST: hdmi-hpd-storm-disable
- * Description: Disable HPD storm detection, trigger a storm and check the
- * kernel doesn't detect one
- * Test category: functionality test
- * Functionality: chamelium, hotplug
- * Mega feature: HDMI
- * Driver requirement: i915, xe
- */
static const char test_hpd_storm_disable_desc[] =
"Disable HPD storm detection, trigger a storm and check the kernel "
"doesn't detect one";
diff --git a/tests/intel/kms_big_fb.c b/tests/intel/kms_big_fb.c
index 2c7b24fca..9177f7608 100644
--- a/tests/intel/kms_big_fb.c
+++ b/tests/intel/kms_big_fb.c
@@ -37,6 +37,168 @@
#include "xe/xe_ioctl.h"
#include "xe/xe_query.h"
+/**
+ * SUBTEST: linear-%dbpp-rotate-%d
+ * Description: Sanity check if addfb ioctl works correctly for given combination
+ * of Linear modifier with %arg[1]-bpp & %arg[2]-rotation
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 8, 16, 32, 64
+ * arg[2].values: 0, 90, 180, 270
+ */
+
+/**
+ * SUBTEST: %s-%dbpp-rotate-%d
+ * Description: Sanity check if addfb ioctl works correctly for given combination
+ * of %arg[1] with %arg[2]-bpp & %arg[3]-rotation
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop, rotation, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4-tiled: TILE-4 modifier
+ * @x-tiled: TILE-X modifier
+ * @y-tiled: TILE-Y modifier
+ * @yf-tiled: TILE-YF modifier
+ *
+ * arg[2].values: 8, 16, 32, 64
+ * arg[3].values: 0, 90, 180, 270
+ */
+
+/**
+ * SUBTEST: linear-max-hw-stride-%dbpp-rotate-%d
+ * Description: Test maximum hardware supported stride length for given combination
+ * of linear modifier with max hardware stride length, %arg[1]-bpp,
+ * and %arg[2]-rotation
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 32, 64
+ * arg[2].values: 0, 180
+ */
+
+/**
+ * SUBTEST: %s-max-hw-stride-%dbpp-rotate-%d
+ * Description: Test maximum hardware supported stride length for given combination
+ * of %arg[1] modifier with max hardware stride length, %arg[2]-bpp,
+ * and %arg[3]-rotation
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop, rotation, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4-tiled: TILE-4 modifier
+ * @x-tiled: TILE-X modifier
+ * @y-tiled: TILE-Y modifier
+ * @yf-tiled: TILE-YF modifier
+ *
+ * arg[2].values: 32, 64
+ * arg[3].values: 0, 180
+ */
+
+/**
+ * SUBTEST: %s-max-hw-stride-%dbpp-rotate-%d-hflip
+ * Description: Test maximum hardware supported stride length for given combination
+ * of %arg[1] modifier with max hardware stride length, %arg[2]-bpp,
+ * and %arg[3]-rotation with H-flip mode
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop, rotation, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: %s-max-hw-stride-%dbpp-rotate-%d-%s
+ * Description: Test maximum hardware supported stride length for given combination
+ * of %arg[1] modifier with max hardware stride length, %arg[2]-bpp,
+ * and %arg[3]-rotation with %arg[4] mode
+ * Driver requirement: i915, xe
+ * Functionality: async_flips, big_fbs, kms_gem_interop, rotation, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4-tiled: TILE-4 modifier
+ * @x-tiled: TILE-X modifier
+ * @y-tiled: TILE-Y modifier
+ * @yf-tiled: TILE-YF modifier
+ *
+ * arg[2].values: 32, 64
+ * arg[3].values: 0, 180
+ *
+ * arg[4]:
+ *
+ * @async-flip: Async flip
+ * @hflip-async-flip: Async & H-flip
+ */
+
+/**
+ * SUBTEST: %s-addfb-size-overflow
+ * Description: Sanity check if addfb ioctl fails correctly for (%arg[1]) modifier
+ * with small bo.
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4-tiled: TILE-4
+ * @x-tiled: TILE-X
+ * @y-tiled: TILE-Y
+ * @yf-tiled: TILE-YF
+ */
+
+/**
+ * SUBTEST: %s-addfb-size-offset-overflow
+ * Description: Sanity check if addfb ioctl fails correctly for (%arg[1]) modifier
+ * and offsets with small bo
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4-tiled: TILE-4
+ * @x-tiled: TILE-X
+ * @y-tiled: TILE-Y
+ * @yf-tiled: TILE-YF
+ */
+
+/**
+ * SUBTEST: linear-addfb
+ * Description: Sanity check if addfb ioctl works correctly with Linear modifier
+ * for given size and strides of fb
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: %s-addfb
+ * Description: Sanity check if addfb ioctl works correctly with %arg[1] modifier
+ * for given size and strides of fb
+ * Driver requirement: i915, xe
+ * Functionality: big_fbs, kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4-tiled: TILE-4
+ * @x-tiled: TILE-X
+ * @y-tiled: TILE-Y
+ * @yf-tiled: TILE-YF
+ */
+
IGT_TEST_DESCRIPTION("Test big framebuffers");
typedef struct {
@@ -588,108 +750,6 @@ max_hw_stride_async_flip_test(data_t *data)
return true;
}
-/**
- * SUBTEST: linear-%dbpp-rotate-%d
- * Description: Sanity check if addfb ioctl works correctly for given combination
- * of Linear modifier with %arg[1]-bpp & %arg[2]-rotation
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 8, 16, 32, 64
- * arg[2].values: 0, 90, 180, 270
- */
-
-/**
- * SUBTEST: %s-%dbpp-rotate-%d
- * Description: Sanity check if addfb ioctl works correctly for given combination
- * of %arg[1] with %arg[2]-bpp & %arg[3]-rotation
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop, rotation, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4-tiled: TILE-4 modifier
- * @x-tiled: TILE-X modifier
- * @y-tiled: TILE-Y modifier
- * @yf-tiled: TILE-YF modifier
- *
- * arg[2].values: 8, 16, 32, 64
- * arg[3].values: 0, 90, 180, 270
- */
-
-/**
- * SUBTEST: linear-max-hw-stride-%dbpp-rotate-%d
- * Description: Test maximum hardware supported stride length for given combination
- * of linear modifier with max hardware stride length, %arg[1]-bpp,
- * and %arg[2]-rotation
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 32, 64
- * arg[2].values: 0, 180
- */
-
-/**
- * SUBTEST: %s-max-hw-stride-%dbpp-rotate-%d
- * Description: Test maximum hardware supported stride length for given combination
- * of %arg[1] modifier with max hardware stride length, %arg[2]-bpp,
- * and %arg[3]-rotation
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop, rotation, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4-tiled: TILE-4 modifier
- * @x-tiled: TILE-X modifier
- * @y-tiled: TILE-Y modifier
- * @yf-tiled: TILE-YF modifier
- *
- * arg[2].values: 32, 64
- * arg[3].values: 0, 180
- */
-
-/**
- * SUBTEST: %s-max-hw-stride-%dbpp-rotate-%d-hflip
- * Description: Test maximum hardware supported stride length for given combination
- * of %arg[1] modifier with max hardware stride length, %arg[2]-bpp,
- * and %arg[3]-rotation with H-flip mode
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop, rotation, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: %s-max-hw-stride-%dbpp-rotate-%d-%s
- * Description: Test maximum hardware supported stride length for given combination
- * of %arg[1] modifier with max hardware stride length, %arg[2]-bpp,
- * and %arg[3]-rotation with %arg[4] mode
- * Driver requirement: i915, xe
- * Functionality: async_flips, big_fbs, kms_gem_interop, rotation, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4-tiled: TILE-4 modifier
- * @x-tiled: TILE-X modifier
- * @y-tiled: TILE-Y modifier
- * @yf-tiled: TILE-YF modifier
- *
- * arg[2].values: 32, 64
- * arg[3].values: 0, 180
- *
- * arg[4]:
- *
- * @async-flip: Async flip
- * @hflip-async-flip: Async & H-flip
- */
static void test_scanout(data_t *data)
{
igt_output_t *output;
@@ -735,22 +795,6 @@ static void test_scanout(data_t *data)
igt_skip("unsupported configuration\n");
}
-/**
- * SUBTEST: %s-addfb-size-overflow
- * Description: Sanity check if addfb ioctl fails correctly for (%arg[1]) modifier
- * with small bo.
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4-tiled: TILE-4
- * @x-tiled: TILE-X
- * @y-tiled: TILE-Y
- * @yf-tiled: TILE-YF
- */
static void
test_size_overflow(data_t *data)
{
@@ -795,22 +839,6 @@ test_size_overflow(data_t *data)
gem_close(data->drm_fd, bo);
}
-/**
- * SUBTEST: %s-addfb-size-offset-overflow
- * Description: Sanity check if addfb ioctl fails correctly for (%arg[1]) modifier
- * and offsets with small bo
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4-tiled: TILE-4
- * @x-tiled: TILE-X
- * @y-tiled: TILE-Y
- * @yf-tiled: TILE-YF
- */
static void
test_size_offset_overflow(data_t *data)
{
@@ -869,30 +897,6 @@ static int rmfb(int fd, uint32_t id)
return err;
}
-/**
- * SUBTEST: linear-addfb
- * Description: Sanity check if addfb ioctl works correctly with Linear modifier
- * for given size and strides of fb
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: %s-addfb
- * Description: Sanity check if addfb ioctl works correctly with %arg[1] modifier
- * for given size and strides of fb
- * Driver requirement: i915, xe
- * Functionality: big_fbs, kms_gem_interop, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4-tiled: TILE-4
- * @x-tiled: TILE-X
- * @y-tiled: TILE-Y
- * @yf-tiled: TILE-YF
- */
static void
test_addfb(data_t *data)
{
diff --git a/tests/intel/kms_big_joiner.c b/tests/intel/kms_big_joiner.c
index a555ca799..8e6c495fc 100644
--- a/tests/intel/kms_big_joiner.c
+++ b/tests/intel/kms_big_joiner.c
@@ -29,8 +29,33 @@
* Category: Display
* Description: Test big joiner
*/
+
#include "igt.h"
+/**
+ * SUBTEST: invalid-modeset
+ * Description: Verify if the modeset on the adjoining pipe is rejected when
+ * the pipe is active with a big joiner modeset
+ * Driver requirement: i915, xe
+ * Functionality: 2p1p
+ * Mega feature: Bigjoiner
+ * Test category: functionality test
+ *
+ * SUBTEST: basic
+ * Description: Verify the basic modeset on big joiner mode on all pipes
+ * Driver requirement: i915, xe
+ * Functionality: 2p1p
+ * Mega feature: Bigjoiner
+ * Test category: functionality test
+ *
+ * SUBTEST: 2x-modeset
+ * Description: Verify simultaneous modeset on 2 big joiner outputs
+ * Driver requirement: i915, xe
+ * Functionality: 2p1p
+ * Mega feature: Bigjoiner
+ * Test category: functionality test
+ */
+
#define MAX_HDISPLAY_PER_PIPE 5120
IGT_TEST_DESCRIPTION("Test big joiner");
@@ -45,15 +70,6 @@ typedef struct {
uint32_t big_joiner_output[2];
} data_t;
-/**
- * SUBTEST: invalid-modeset
- * Description: Verify if the modeset on the adjoining pipe is rejected when
- * the pipe is active with a big joiner modeset
- * Driver requirement: i915, xe
- * Functionality: 2p1p
- * Mega feature: Bigjoiner
- * Test category: functionality test
- */
static void test_invalid_modeset(data_t *data)
{
igt_output_t *output;
@@ -94,14 +110,6 @@ static void test_invalid_modeset(data_t *data)
igt_assert_lt(ret, 0);
}
-/**
- * SUBTEST: basic
- * Description: Verify the basic modeset on big joiner mode on all pipes
- * Driver requirement: i915, xe
- * Functionality: 2p1p
- * Mega feature: Bigjoiner
- * Test category: functionality test
- */
static void test_basic_modeset(data_t *data)
{
drmModeModeInfo *mode;
@@ -140,14 +148,6 @@ static void test_basic_modeset(data_t *data)
igt_display_commit2(display, COMMIT_ATOMIC);
}
-/**
- * SUBTEST: 2x-modeset
- * Description: Verify simultaneous modeset on 2 big joiner outputs
- * Driver requirement: i915, xe
- * Functionality: 2p1p
- * Mega feature: Bigjoiner
- * Test category: functionality test
- */
static void test_dual_display(data_t *data)
{
drmModeModeInfo *mode;
diff --git a/tests/intel/kms_busy.c b/tests/intel/kms_busy.c
index 50616513c..625b0743f 100644
--- a/tests/intel/kms_busy.c
+++ b/tests/intel/kms_busy.c
@@ -26,6 +26,7 @@
* Category: Display
* Description: Basic check of KMS ABI with busy framebuffers.
*/
+
#include <sys/poll.h>
#include <signal.h>
#include <time.h>
@@ -33,6 +34,61 @@
#include "i915/gem.h"
#include "igt.h"
+/**
+ * SUBTEST: basic
+ * Description: Test for basic check of KMS ABI with busy framebuffers.
+ * Driver requirement: i915
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: basic-hang
+ * Description: Test for basic check of KMS ABI with busy framebuffers.
+ * Driver requirement: i915
+ * Functionality: kms_core, hang
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
+/**
+ * SUBTEST: extended-modeset-hang-%s
+ * Description: Test for basic check of KMS ABI with busy framebuffers.
+ * Driver requirement: i915
+ * Functionality: kms_core, hang
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @newfb: New framebuffer
+ * @oldfb: Old framebuffer
+ * @newfb-with-reset: New framebuffer with reset
+ * @oldfb-with-reset: Old framebuffer with reset
+ */
+
+/**
+ * SUBTEST: extended-pageflip-hang-%s
+ * Description: Test for basic check of KMS ABI with busy framebuffers.
+ * Driver requirement: i915
+ * Functionality: kms_core, hang
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @newfb: New framebuffer
+ * @oldfb: Old framebuffer
+ */
+
+/**
+ * SUBTEST: extended-pageflip-modeset-hang-oldfb
+ * Description: Test for basic check of KMS ABI with busy framebuffers.
+ * Driver requirement: i915
+ * Functionality: kms_core, hang
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
IGT_TEST_DESCRIPTION("Basic check of KMS ABI with busy framebuffers.");
static bool all_pipes = false;
@@ -136,21 +192,6 @@ static void flip_to_fb(igt_display_t *dpy, int pipe,
put_ahnd(ahnd);
}
-/**
- * SUBTEST: basic
- * Description: Test for basic check of KMS ABI with busy framebuffers.
- * Driver requirement: i915
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: basic-hang
- * Description: Test for basic check of KMS ABI with busy framebuffers.
- * Driver requirement: i915
- * Functionality: kms_core, hang
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_flip(igt_display_t *dpy, int pipe,
igt_output_t *output, bool modeset)
{
@@ -243,35 +284,6 @@ static void test_atomic_commit_hang(igt_display_t *dpy, igt_plane_t *primary,
put_ahnd(ahnd);
}
-/**
- * SUBTEST: extended-modeset-hang-%s
- * Description: Test for basic check of KMS ABI with busy framebuffers.
- * Driver requirement: i915
- * Functionality: kms_core, hang
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @newfb: New framebuffer
- * @oldfb: Old framebuffer
- * @newfb-with-reset: New framebuffer with reset
- * @oldfb-with-reset: Old framebuffer with reset
- */
-
-/**
- * SUBTEST: extended-pageflip-hang-%s
- * Description: Test for basic check of KMS ABI with busy framebuffers.
- * Driver requirement: i915
- * Functionality: kms_core, hang
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @newfb: New framebuffer
- * @oldfb: Old framebuffer
- */
static void test_hang(igt_display_t *dpy,
enum pipe pipe, igt_output_t *output,
bool modeset, bool hang_newfb)
@@ -319,14 +331,6 @@ static void test_hang(igt_display_t *dpy,
igt_remove_fb(dpy->drm_fd, &fb[0]);
}
-/**
- * SUBTEST: extended-pageflip-modeset-hang-oldfb
- * Description: Test for basic check of KMS ABI with busy framebuffers.
- * Driver requirement: i915
- * Functionality: kms_core, hang
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void
test_pageflip_modeset_hang(igt_display_t *dpy,
igt_output_t *output, enum pipe pipe)
diff --git a/tests/intel/kms_ccs.c b/tests/intel/kms_ccs.c
index 09b98fbec..813d4e5d6 100644
--- a/tests/intel/kms_ccs.c
+++ b/tests/intel/kms_ccs.c
@@ -29,6 +29,7 @@
* complemented by a color control surface (CCS) that the display
* uses to interpret the compressed data.
*/
+
#include "igt.h"
#include "i915/gem_create.h"
diff --git a/tests/intel/kms_cdclk.c b/tests/intel/kms_cdclk.c
index 71d827dac..2b3913571 100644
--- a/tests/intel/kms_cdclk.c
+++ b/tests/intel/kms_cdclk.c
@@ -29,8 +29,33 @@
* Category: Display
* Description: Test cdclk features : crawling and squashing
*/
+
#include "igt.h"
+/**
+ * SUBTEST: mode-transition-all-outputs
+ * Description: Mode transition (low to high) test to validate cdclk frequency
+ * change by simultaneous modesets on all pipes with valid outputs.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: mode-transition
+ * Description: Mode transition (low to high) test to validate cdclk frequency change.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-scaling
+ * Description: Plane scaling test to validate cdclk frequency change.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
IGT_TEST_DESCRIPTION("Test cdclk features : crawling and squashing");
#define HDISPLAY_4K 3840
@@ -253,15 +278,6 @@ static void test_mode_transition(data_t *data, enum pipe pipe, igt_output_t *out
igt_remove_fb(display->drm_fd, &fb);
}
-/**
- * SUBTEST: mode-transition-all-outputs
- * Description: Mode transition (low to high) test to validate cdclk frequency
- * change by simultaneous modesets on all pipes with valid outputs.
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_mode_transition_on_all_outputs(data_t *data)
{
igt_display_t *display = &data->display;
@@ -358,21 +374,6 @@ static void test_mode_transition_on_all_outputs(data_t *data)
igt_remove_fb(data->drm_fd, &fb);
}
-/**
- * SUBTEST: mode-transition
- * Description: Mode transition (low to high) test to validate cdclk frequency change.
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-scaling
- * Description: Plane scaling test to validate cdclk frequency change.
- * Driver requirement: i915, xe
- * Functionality: kms_core, plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void run_cdclk_test(data_t *data, uint32_t flags)
{
igt_display_t *display = &data->display;
diff --git a/tests/intel/kms_dirtyfb.c b/tests/intel/kms_dirtyfb.c
index cc9529178..87b86d9aa 100644
--- a/tests/intel/kms_dirtyfb.c
+++ b/tests/intel/kms_dirtyfb.c
@@ -3,6 +3,12 @@
* Copyright © 2023 Intel Corporation
*/
+/**
+ * TEST: kms dirtyfb
+ * Category: Display
+ * Description: Test DIRTYFB ioctl functionality.
+ */
+
#include <sys/types.h>
#include "igt.h"
@@ -13,14 +19,7 @@
#include "xe/xe_query.h"
-IGT_TEST_DESCRIPTION("Test the DIRTYFB ioctl is working properly with "
- "its related features: FBC, PSR and DRRS");
-
/**
- * TEST: kms dirtyfb
- * Category: Display
- * Description: Test DIRTYFB ioctl functionality.
- *
* SUBTEST: dirtyfb-ioctl
* Description: Test DIRTYFB ioctl is working properly using GPU
* frontbuffer rendering with features like FBC, PSR
@@ -31,6 +30,9 @@ IGT_TEST_DESCRIPTION("Test the DIRTYFB ioctl is working properly with "
* Test category: functionality test
*/
+IGT_TEST_DESCRIPTION("Test the DIRTYFB ioctl is working properly with "
+ "its related features: FBC, PSR and DRRS");
+
#ifndef PAGE_ALIGN
#ifndef PAGE_SIZE
#define PAGE_SIZE 4096
diff --git a/tests/intel/kms_draw_crc.c b/tests/intel/kms_draw_crc.c
index 086f64dc8..57b7f0edb 100644
--- a/tests/intel/kms_draw_crc.c
+++ b/tests/intel/kms_draw_crc.c
@@ -27,9 +27,51 @@
* Category: Display
* Description: Tests whether the igt_draw library actually works.
*/
+
#include "i915/gem.h"
#include "igt.h"
+/**
+ * SUBTEST: draw-method-%s
+ * Description: Verify that igt draw library works for the %arg[1] method with
+ * different modifiers & DRM formats.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @blt: Blitter
+ * @mmap-wc: MMAP-WC
+ * @render: Render
+ */
+
+/**
+ * SUBTEST: draw-method-%s
+ * Description: Verify that igt draw library works for the %arg[1] method with
+ * different modifiers & DRM formats.
+ * Driver requirement: i915
+ * Functionality: kms_core, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @mmap-cpu: MMAP-CPU
+ * @mmap-gtt: MMAP-GTT
+ * @pwrite: PWRITE
+ */
+
+/**
+ * SUBTEST: fill-fb
+ * Description: This subtest verifies CRC after filling fb with x-tiling or none.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
#define MAX_CONNECTORS 32
int drm_fd;
@@ -143,37 +185,6 @@ static void get_method_crc(enum igt_draw_method method, uint32_t drm_format,
igt_remove_fb(drm_fd, &fb);
}
-/**
- * SUBTEST: draw-method-%s
- * Description: Verify that igt draw library works for the %arg[1] method with
- * different modifiers & DRM formats.
- * Driver requirement: i915, xe
- * Functionality: kms_core, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @blt: Blitter
- * @mmap-wc: MMAP-WC
- * @render: Render
- */
-
-/**
- * SUBTEST: draw-method-%s
- * Description: Verify that igt draw library works for the %arg[1] method with
- * different modifiers & DRM formats.
- * Driver requirement: i915
- * Functionality: kms_core, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @mmap-cpu: MMAP-CPU
- * @mmap-gtt: MMAP-GTT
- * @pwrite: PWRITE
- */
static void draw_method_subtest(enum igt_draw_method method,
uint32_t format_index, uint64_t modifier)
{
@@ -213,14 +224,6 @@ static void get_fill_crc(uint64_t modifier, igt_crc_t *crc)
igt_remove_fb(drm_fd, &fb);
}
-/**
- * SUBTEST: fill-fb
- * Description: This subtest verifies CRC after filling fb with x-tiling or none.
- * Driver requirement: i915, xe
- * Functionality: kms_core, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void fill_fb_subtest(void)
{
int rc;
diff --git a/tests/intel/kms_dsc.c b/tests/intel/kms_dsc.c
index c7dfb509a..270fd2b44 100644
--- a/tests/intel/kms_dsc.c
+++ b/tests/intel/kms_dsc.c
@@ -35,6 +35,7 @@
* Category: Display
* Description: Test to validate display stream compression
*/
+
#include "kms_dsc_helper.h"
/**
diff --git a/tests/intel/kms_fb_coherency.c b/tests/intel/kms_fb_coherency.c
index d0c0df9ee..735020a94 100644
--- a/tests/intel/kms_fb_coherency.c
+++ b/tests/intel/kms_fb_coherency.c
@@ -17,6 +17,17 @@
#include "igt.h"
+/**
+ * SUBTEST: memset-crc
+ * Description: Use display controller CRC hardware to validate (non)coherency
+ * of memset operations on future scanout buffer objects
+ * mmapped with different mmap methods and different caching modes.
+ * Mega feature: General Display Features
+ * Functionality: kms_core
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ */
+
typedef struct {
int drm_fd;
igt_display_t display;
@@ -239,16 +250,6 @@ igt_main
select_valid_pipe_output_combo(&data);
}
- /**
- * SUBTEST: memset-crc
- * Description: Use display controller CRC hardware to validate (non)coherency
- * of memset operations on future scanout buffer objects
- * mmapped with different mmap methods and different caching modes.
- * Mega feature: General Display Features
- * Functionality: kms_core
- * Driver requirement: i915, xe
- * Test category: functionality test
- */
igt_subtest_with_dynamic("memset-crc") {
if (gem_has_mappable_ggtt(data.drm_fd)) {
igt_dynamic("mmap-gtt")
diff --git a/tests/intel/kms_fbcon_fbt.c b/tests/intel/kms_fbcon_fbt.c
index 8d6bb3cb6..bba81cdc0 100644
--- a/tests/intel/kms_fbcon_fbt.c
+++ b/tests/intel/kms_fbcon_fbt.c
@@ -24,6 +24,13 @@
*
*/
+/**
+ * TEST: kms fbcon fbt
+ * Category: Display
+ * Description: Test the relationship between fbcon and the frontbuffer tracking
+ * infrastructure.
+ */
+
#include "igt.h"
#include "igt_device.h"
#include "igt_psr.h"
@@ -33,11 +40,6 @@
#include <fcntl.h>
/**
- * TEST: kms fbcon fbt
- * Category: Display
- * Description: Test the relationship between fbcon and the frontbuffer tracking
- * infrastructure.
- *
* SUBTEST: fbc
* Description: Test the relationship between fbcon and the frontbuffer tracking
* infrastructure with fbc enabled.
diff --git a/tests/intel/kms_fence_pin_leak.c b/tests/intel/kms_fence_pin_leak.c
index 03f3990c4..122be554d 100644
--- a/tests/intel/kms_fence_pin_leak.c
+++ b/tests/intel/kms_fence_pin_leak.c
@@ -22,6 +22,12 @@
*
*/
+/**
+ * TEST: kms fence pin leak
+ * Category: Display
+ * Description: Exercises full ppgtt fence pin_count leak in the kernel.
+ */
+
#include <errno.h>
#include <limits.h>
#include <stdbool.h>
@@ -30,11 +36,8 @@
#include "i915/gem.h"
#include "igt.h"
+
/**
- * TEST: kms fence pin leak
- * Category: Display
- * Description: Exercises full ppgtt fence pin_count leak in the kernel.
- *
* SUBTEST:
* Description: Along with the modeset, validate fence pin_count leakage.
* Driver requirement: i915
diff --git a/tests/intel/kms_flip_scaled_crc.c b/tests/intel/kms_flip_scaled_crc.c
index 2997b63fa..1b7e536de 100644
--- a/tests/intel/kms_flip_scaled_crc.c
+++ b/tests/intel/kms_flip_scaled_crc.c
@@ -27,6 +27,7 @@
* Category: Display
* Description: Test flipping between scaled/nonscaled framebuffers
*/
+
#include "igt.h"
/**
diff --git a/tests/intel/kms_flip_tiling.c b/tests/intel/kms_flip_tiling.c
index 295f097ec..0655c05fd 100644
--- a/tests/intel/kms_flip_tiling.c
+++ b/tests/intel/kms_flip_tiling.c
@@ -24,17 +24,20 @@
* Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
*/
+/**
+ * TEST: kms flip tiling
+ * Category: Display
+ * Description: Test page flips and tiling scenarios
+ */
+
#include <errno.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include "igt.h"
+
/**
- * TEST: kms flip tiling
- * Category: Display
- * Description: Test page flips and tiling scenarios
- *
* SUBTEST: flip-change-tiling
* Description: Check pageflip between modifiers
* Driver requirement: i915, xe
diff --git a/tests/intel/kms_frontbuffer_tracking.c b/tests/intel/kms_frontbuffer_tracking.c
index f90d09f9f..7a3550347 100644
--- a/tests/intel/kms_frontbuffer_tracking.c
+++ b/tests/intel/kms_frontbuffer_tracking.c
@@ -29,6 +29,7 @@
* Category: Display
* Description: Test the Kernel's frontbuffer tracking mechanism and its related features: FBC, PSR and DRRS
*/
+
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
@@ -43,3681 +44,4070 @@
#include "igt_sysfs.h"
#include "igt_psr.h"
-#define TIME SLOW_QUICK(1000, 10000)
-
-IGT_TEST_DESCRIPTION("Test the Kernel's frontbuffer tracking mechanism and "
- "its related features: FBC, PSR and DRRS");
-
-/*
- * One of the aspects of this test is that, for every subtest, we try different
- * combinations of the parameters defined by the struct below. Because of this,
- * a single addition of a new parameter or subtest function can lead to hundreds
- * of new subtests.
+/**
+ * SUBTEST: drrs-%dp-rte
+ * Description: Sanity test to enable DRRS with %arg[1] panels.
+ * Driver requirement: i915, xe
+ * Functionality: fbt, drrs
+ * Mega feature: General Display Features
+ * Test category: functionality test
*
- * In order to reduce the number combinations we cut the cases that don't make
- * sense, such as writing on the secondary screen when there is only a single
- * pipe, or flipping when the target is the offscreen buffer. We also hide some
- * combinations that are somewhat redundant and don't add much value to the
- * test. For example, since we already do the offscreen testing with a single
- * pipe enabled, there's no much value in doing it again with dual pipes. If you
- * still want to try these redundant tests, you need to use the --show-hidden
- * option.
+ * SUBTEST: fbc-%dp-rte
+ * Description: Sanity test to enable FBC with %arg[1] panels.
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
*
- * The most important hidden thing is the FEATURE_NONE set of tests. Whenever
- * you get a failure on any test, it is important to check whether the same test
- * fails with FEATURE_NONE - replace the feature name for "nop". If the nop test
- * also fails, then it's likely the problem will be on the IGT side instead of
- * the Kernel side. We don't expose this set of tests by default because (i)
- * they take a long time to test; and (ii) if the feature tests work, then it's
- * very likely that the nop tests will also work.
+ * SUBTEST: psr-%dp-rte
+ * Description: Sanity test to enable PSR with %arg[1] panels.
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-rte
+ * Description: Sanity test to enable FBC & DRRS with %arg[1] panels.
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-rte
+ * Description: Sanity test to enable FBC & PSR with %arg[1] panels.
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-rte
+ * Description: Sanity test to enable PSR & DRRS with %arg[1] panels.
+ * Driver requirement: i915, xe
+ * Functionality: fbt, drrs, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-rte
+ * Description: Sanity test to enable FBC, PSR & DRRS with %arg[1] panels.
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, drrs, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
*/
-struct test_mode {
- /* Are we going to enable just one monitor, or are we going to setup a
- * dual screen environment for the test? */
- enum {
- PIPE_SINGLE = 0,
- PIPE_DUAL,
- PIPE_COUNT,
- } pipes;
-
- /* The primary screen is the one that's supposed to have the "feature"
- * enabled on, but we have the option to draw on the secondary screen or
- * on some offscreen buffer. We also only theck the CRC of the primary
- * screen. */
- enum {
- SCREEN_PRIM = 0,
- SCREEN_SCND,
- SCREEN_OFFSCREEN,
- SCREEN_COUNT,
- } screen;
-
- /* When we draw, we can draw directly on the primary plane, on the
- * cursor or on the sprite plane. */
- enum {
- PLANE_PRI = 0,
- PLANE_CUR,
- PLANE_SPR,
- PLANE_COUNT,
- } plane;
-
- /* We can organize the screens in a way that each screen has its own
- * framebuffer, or in a way that all screens point to the same
- * framebuffer, but on different places. This includes the offscreen
- * screen. */
- enum {
- FBS_INDIVIDUAL = 0,
- FBS_SHARED,
- FBS_COUNT,
- } fbs;
- /* Which features are we going to test now? This is a mask!
- * FEATURE_DEFAULT is a special value which instruct the test to just
- * keep what's already enabled by default in the Kernel. */
- enum {
- FEATURE_NONE = 0,
- FEATURE_FBC = 1,
- FEATURE_PSR = 2,
- FEATURE_DRRS = 4,
- FEATURE_COUNT = 8,
- FEATURE_DEFAULT = 8,
- } feature;
+/**
+ * SUBTEST: drrs-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @indfb: Individual fb
+ * @shrfb: Shared fb
+ *
+ * arg[2]:
+ *
+ * @blt: Blitter
+ * @mmap-wc: MMAP-WC
+ * @render: Render
+ */
- /* Possible pixel formats. We just use FORMAT_DEFAULT for most tests and
- * only test a few things on the other formats. */
- enum pixel_format {
- FORMAT_RGB888 = 0,
- FORMAT_RGB565,
- FORMAT_RGB101010,
- FORMAT_COUNT,
- FORMAT_DEFAULT = FORMAT_RGB888,
- } format;
+/**
+ * SUBTEST: drrs-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-1p-offscren-pri-%s-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @indfb: Individual fb
+ * @shrfb: Shared fb
+ *
+ * arg[2]:
+ *
+ * @mmap-cpu: MMAP-CPU
+ * @mmap-gtt: MMAP-GTT
+ * @pwrite: PWRITE
+ */
- /* There are multiple APIs where we can do the equivalent of a page flip
- * and they exercise slightly different codepaths inside the Kernel. */
- enum flip_type {
- FLIP_PAGEFLIP,
- FLIP_MODESET,
- FLIP_PLANES,
- FLIP_COUNT,
- } flip;
-
- enum tiling_type {
- TILING_LINEAR = 0,
- TILING_X,
- TILING_Y,
- TILING_4,
- TILING_COUNT,
- TILING_DEFAULT = TILING_X,
- } tiling;
-
- enum igt_draw_method method;
-};
-
-enum color {
- COLOR_RED,
- COLOR_GREEN,
- COLOR_BLUE,
- COLOR_MAGENTA,
- COLOR_CYAN,
- COLOR_SCND_BG,
- COLOR_PRIM_BG = COLOR_BLUE,
- COLOR_OFFSCREEN_BG = COLOR_SCND_BG,
-};
-
-struct rect {
- int x;
- int y;
- int w;
- int h;
- uint32_t color;
-};
-
-struct {
- int fd;
- int debugfs;
- igt_display_t display;
-
- struct buf_ops *bops;
-} drm;
-
-struct {
- bool can_test;
-
- bool supports_last_action;
-
- struct timespec last_action;
-} fbc = {
- .can_test = false,
- .supports_last_action = false,
-};
-
-struct {
- bool can_test;
-} psr = {
- .can_test = false,
-};
-
-#define MAX_DRRS_STATUS_BUF_LEN 256
-
-struct {
- bool can_test;
-} drrs = {
- .can_test = false,
-};
-
-igt_pipe_crc_t *pipe_crc;
-igt_crc_t *wanted_crc;
-struct {
- bool initialized;
- igt_crc_t crc;
-} blue_crcs[FORMAT_COUNT];
-
-/* The goal of this structure is to easily allow us to deal with cases where we
- * have a big framebuffer and the CRTC is just displaying a subregion of this
- * big FB. */
-struct fb_region {
- igt_plane_t *plane;
- struct igt_fb *fb;
- int x;
- int y;
- int w;
- int h;
-};
-
-struct draw_pattern_info {
- bool frames_stack;
- int n_rects;
- struct rect (*get_rect)(struct fb_region *fb, int r);
-
- bool initialized[FORMAT_COUNT];
- igt_crc_t *crcs[FORMAT_COUNT];
-};
-
-/* Draw big rectangles on the screen. */
-struct draw_pattern_info pattern1;
-/* 64x64 rectangles at x:0,y:0, just so we can draw on the cursor and sprite. */
-struct draw_pattern_info pattern2;
-/* 64x64 rectangles at different positions, same color, for the move test. */
-struct draw_pattern_info pattern3;
-/* Just a fullscreen green square. */
-struct draw_pattern_info pattern4;
-
-/* Command line parameters. */
-struct {
- bool check_status;
- bool check_crc;
- bool fbc_check_compression;
- bool fbc_check_last_action;
- bool no_edp;
- bool small_modes;
- bool show_hidden;
- int step;
- int only_pipes;
- int shared_fb_x_offset;
- int shared_fb_y_offset;
- enum tiling_type tiling;
-} opt = {
- .check_status = true,
- .check_crc = true,
- .fbc_check_compression = true,
- .fbc_check_last_action = true,
- .no_edp = false,
- .small_modes = false,
- .show_hidden= false,
- .step = 0,
- .only_pipes = PIPE_COUNT,
- .shared_fb_x_offset = 248,
- .shared_fb_y_offset = 500,
- .tiling = TILING_DEFAULT,
-};
-
-struct modeset_params {
- enum pipe pipe;
- igt_output_t *output;
- drmModeModeInfo mode;
-
- struct fb_region primary;
- struct fb_region cursor;
- struct fb_region sprite;
-};
-
-struct modeset_params prim_mode_params;
-struct modeset_params scnd_mode_params;
-
-struct fb_region offscreen_fb;
-struct screen_fbs {
- bool initialized;
-
- struct igt_fb prim_pri;
- struct igt_fb prim_cur;
- struct igt_fb prim_spr;
-
- struct igt_fb scnd_pri;
- struct igt_fb scnd_cur;
- struct igt_fb scnd_spr;
-
- struct igt_fb offscreen;
- struct igt_fb big;
-} fbs[FORMAT_COUNT];
-
-struct {
- pthread_t thread;
- bool stop;
-
- uint32_t handle;
- uint32_t size;
- uint32_t stride;
- int width;
- int height;
- uint32_t color;
- int bpp;
- uint32_t tiling;
-} busy_thread = {
- .stop = true,
-};
-
-static drmModeModeInfo *get_connector_smallest_mode(igt_output_t *output)
-{
- drmModeConnector *c = output->config.connector;
- const drmModeModeInfo *smallest = NULL;
- int i;
-
- if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
- return igt_std_1024_mode_get(igt_output_preferred_vrefresh(output));
-
- for (i = 0; i < c->count_modes; i++) {
- const drmModeModeInfo *mode = &c->modes[i];
-
- if (!smallest ||
- mode->hdisplay * mode->vdisplay <
- smallest->hdisplay * smallest->vdisplay)
- smallest = mode;
- }
-
- if (smallest)
- return igt_memdup(smallest, sizeof(*smallest));
- else
- return igt_std_1024_mode_get(60);
-}
-
-static drmModeModeInfo *connector_get_mode(igt_output_t *output)
-{
- /* On HSW the CRC WA is so awful that it makes you think everything is
- * bugged. */
- if (IS_HASWELL(intel_get_drm_devid(drm.fd)) &&
- output->config.connector->connector_type == DRM_MODE_CONNECTOR_eDP)
- return igt_std_1024_mode_get(igt_output_preferred_vrefresh(output));
-
- if (opt.small_modes)
- return get_connector_smallest_mode(output);
- else
- return igt_memdup(&output->config.default_mode,
- sizeof(output->config.default_mode));
-}
-
-static void init_mode_params(struct modeset_params *params,
- igt_output_t *output, enum pipe pipe)
-{
- drmModeModeInfo *mode;
-
- igt_output_override_mode(output, NULL);
- mode = connector_get_mode(output);
-
- params->pipe = pipe;
- params->output = output;
- params->mode = *mode;
-
- params->primary.plane = igt_pipe_get_plane_type(&drm.display.pipes[pipe], DRM_PLANE_TYPE_PRIMARY);
- params->primary.fb = NULL;
- params->primary.x = 0;
- params->primary.y = 0;
- params->primary.w = mode->hdisplay;
- params->primary.h = mode->vdisplay;
-
- params->cursor.plane = igt_pipe_get_plane_type(&drm.display.pipes[pipe], DRM_PLANE_TYPE_CURSOR);
- params->cursor.fb = NULL;
- params->cursor.x = 0;
- params->cursor.y = 0;
- params->cursor.w = 64;
- params->cursor.h = 64;
-
- params->sprite.plane = igt_pipe_get_plane_type(&drm.display.pipes[pipe], DRM_PLANE_TYPE_OVERLAY);
- igt_require(params->sprite.plane);
- params->sprite.fb = NULL;
- params->sprite.x = 0;
- params->sprite.y = 0;
- params->sprite.w = 64;
- params->sprite.h = 64;
-
- free(mode);
-}
-
-static bool find_connector(bool edp_only, bool pipe_a,
- igt_output_t *forbidden_output,
- enum pipe forbidden_pipe,
- igt_output_t **ret_output,
- enum pipe *ret_pipe)
-{
- igt_output_t *output;
- enum pipe pipe;
-
- for_each_pipe_with_valid_output(&drm.display, pipe, output) {
- drmModeConnectorPtr c = output->config.connector;
-
- if (edp_only && c->connector_type != DRM_MODE_CONNECTOR_eDP)
- continue;
-
- if (pipe_a && pipe != PIPE_A)
- continue;
-
- if (output == forbidden_output || pipe == forbidden_pipe) {
- igt_output_set_pipe(output, pipe);
- igt_output_override_mode(output, connector_get_mode(output));
-
- continue;
- }
-
- if (c->connector_type == DRM_MODE_CONNECTOR_eDP && opt.no_edp)
- continue;
-
- igt_output_set_pipe(output, pipe);
- igt_output_override_mode(output, connector_get_mode(output));
- if (i915_pipe_output_combo_valid(&drm.display)) {
- *ret_output = output;
- *ret_pipe = pipe;
- return true;
- }
- }
-
- return false;
-}
-
-static bool init_modeset_cached_params(void)
-{
- igt_output_t *prim_output = NULL, *scnd_output = NULL;
- enum pipe prim_pipe, scnd_pipe;
-
- /*
- * We have this problem where PSR is only present on eDP monitors and
- * FBC is only present on pipe A for some platforms. So we search first
- * for the ideal case of eDP supporting pipe A, and try the less optimal
- * configs later, sacrificing one of the features.
- * TODO: refactor the code in a way that allows us to have different
- * sets of prim/scnd structs for different features.
- */
- find_connector(true, true, NULL, PIPE_NONE, &prim_output, &prim_pipe);
- if (!prim_output)
- find_connector(true, false, NULL, PIPE_NONE, &prim_output, &prim_pipe);
- if (!prim_output)
- find_connector(false, true, NULL, PIPE_NONE, &prim_output, &prim_pipe);
- if (!prim_output)
- find_connector(false, false, NULL, PIPE_NONE, &prim_output, &prim_pipe);
-
- if (!prim_output)
- return false;
-
- find_connector(false, false, prim_output, prim_pipe,
- &scnd_output, &scnd_pipe);
-
- init_mode_params(&prim_mode_params, prim_output, prim_pipe);
-
- if (!scnd_output) {
- scnd_mode_params.pipe = PIPE_NONE;
- scnd_mode_params.output = NULL;
- return true;
- }
-
- init_mode_params(&scnd_mode_params, scnd_output, scnd_pipe);
- return true;
-}
-
-static uint64_t tiling_to_modifier(enum tiling_type tiling)
-{
- switch (tiling) {
- case TILING_LINEAR:
- return DRM_FORMAT_MOD_LINEAR;
- case TILING_X:
- return I915_FORMAT_MOD_X_TILED;
- case TILING_Y:
- return I915_FORMAT_MOD_Y_TILED;
- case TILING_4:
- return I915_FORMAT_MOD_4_TILED;
- default:
- igt_assert(false);
- }
-}
-
-static void create_fb(enum pixel_format pformat, int width, int height,
- enum tiling_type tiling, int plane, struct igt_fb *fb)
-{
- uint32_t format;
- uint64_t size, modifier;
- unsigned int stride;
-
- switch (pformat) {
- case FORMAT_RGB888:
- if (plane == PLANE_CUR)
- format = DRM_FORMAT_ARGB8888;
- else
- format = DRM_FORMAT_XRGB8888;
- break;
- case FORMAT_RGB565:
- /* Only the primary plane supports 16bpp! */
- if (plane == PLANE_PRI)
- format = DRM_FORMAT_RGB565;
- else if (plane == PLANE_CUR)
- format = DRM_FORMAT_ARGB8888;
- else
- format = DRM_FORMAT_XRGB8888;
- break;
- case FORMAT_RGB101010:
- if (plane == PLANE_PRI)
- format = DRM_FORMAT_XRGB2101010;
- else if (plane == PLANE_CUR)
- format = DRM_FORMAT_ARGB8888;
- else
- format = DRM_FORMAT_XRGB8888;
- break;
- default:
- igt_assert(false);
- }
-
- modifier = tiling_to_modifier(tiling);
-
- igt_warn_on(plane == PLANE_CUR && tiling != TILING_LINEAR);
-
- igt_calc_fb_size(drm.fd, width, height, format, modifier, &size,
- &stride);
-
- igt_create_fb_with_bo_size(drm.fd, width, height, format, modifier,
- IGT_COLOR_YCBCR_BT709,
- IGT_COLOR_YCBCR_LIMITED_RANGE,
- fb, size, stride);
-}
-
-static uint32_t pick_color(struct igt_fb *fb, enum color ecolor)
-{
- uint32_t color, r, g, b, b2, a;
- bool alpha = false;
-
- switch (fb->drm_format) {
- case DRM_FORMAT_RGB565:
- a = 0x0;
- r = 0x1F << 11;
- g = 0x3F << 5;
- b = 0x1F;
- b2 = 0x10;
- break;
- case DRM_FORMAT_ARGB8888:
- alpha = true;
- case DRM_FORMAT_XRGB8888:
- a = 0xFF << 24;
- r = 0xFF << 16;
- g = 0xFF << 8;
- b = 0xFF;
- b2 = 0x80;
- break;
- case DRM_FORMAT_ARGB2101010:
- alpha = true;
- case DRM_FORMAT_XRGB2101010:
- a = 0x3 << 30;
- r = 0x3FF << 20;
- g = 0x3FF << 10;
- b = 0x3FF;
- b2 = 0x200;
- break;
- default:
- igt_assert(false);
- }
-
- switch (ecolor) {
- case COLOR_RED:
- color = r;
- break;
- case COLOR_GREEN:
- color = g;
- break;
- case COLOR_BLUE:
- color = b;
- break;
- case COLOR_MAGENTA:
- color = r | b;
- break;
- case COLOR_CYAN:
- color = g | b;
- break;
- case COLOR_SCND_BG:
- color = b2;
- break;
- default:
- igt_assert(false);
- }
-
- if (alpha)
- color |= a;
-
- return color;
-}
-
-static void fill_fb(struct igt_fb *fb, enum color ecolor)
-{
- igt_draw_fill_fb(drm.fd, fb, pick_color(fb, ecolor));
-}
+/**
+ * SUBTEST: drrs-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ *
+ * arg[2]:
+ *
+ * @cur: Cursor plane
+ * @pri: Primary plane
+ * @spr: Sprite plane
+ *
+ * arg[3]:
+ *
+ * @mmap-cpu: MMAP-CPU
+ * @mmap-gtt: MMAP-GTT
+ * @pwrite: PWRITE
+ */
-/*
- * This is how the prim, scnd and offscreen FBs should be positioned inside the
- * shared FB. The prim buffer starts at the X and Y offsets defined by
- * opt.shared_fb_{x,y}_offset, then scnd starts at the same X pixel offset,
- * right after prim ends on the Y axis, then the offscreen fb starts after scnd
- * ends. Just like the picture:
+/**
+ * SUBTEST: drrs-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
*
- * +-------------------------+
- * | shared fb |
- * | +------------------+ |
- * | | prim | |
- * | | | |
- * | | | |
- * | | | |
- * | +------------------+--+
- * | | scnd |
- * | | |
- * | | |
- * | +---------------+-----+
- * | | offscreen | |
- * | | | |
- * | | | |
- * +---+---------------+-----+
+ * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
*
- * We do it vertically instead of the more common horizontal case in order to
- * avoid super huge strides not supported by FBC.
+ * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ *
+ * arg[2]:
+ *
+ * @cur: Cursor plane
+ * @pri: Primary plane
+ * @spr: Sprite plane
+ *
+ * arg[3]:
+ *
+ * @blt: Blitter
+ * @mmap-wc: MMAP-WC
+ * @render: Render
*/
-static void create_shared_fb(enum pixel_format format, enum tiling_type tiling)
-{
- int prim_w, prim_h, scnd_w, scnd_h, offs_w, offs_h, big_w, big_h;
- struct screen_fbs *s = &fbs[format];
-
- prim_w = prim_mode_params.mode.hdisplay;
- prim_h = prim_mode_params.mode.vdisplay;
-
- if (scnd_mode_params.output) {
- scnd_w = scnd_mode_params.mode.hdisplay;
- scnd_h = scnd_mode_params.mode.vdisplay;
- } else {
- scnd_w = 0;
- scnd_h = 0;
- }
- offs_w = offscreen_fb.w;
- offs_h = offscreen_fb.h;
-
- big_w = prim_w;
- if (scnd_w > big_w)
- big_w = scnd_w;
- if (offs_w > big_w)
- big_w = offs_w;
- big_w += opt.shared_fb_x_offset;
-
- big_h = prim_h + scnd_h + offs_h + opt.shared_fb_y_offset;
-
- create_fb(format, big_w, big_h, tiling, PLANE_PRI, &s->big);
-}
-
-static void destroy_fbs(enum pixel_format format)
-{
- struct screen_fbs *s = &fbs[format];
-
- if (!s->initialized)
- return;
-
- if (scnd_mode_params.output) {
- igt_remove_fb(drm.fd, &s->scnd_pri);
- igt_remove_fb(drm.fd, &s->scnd_cur);
- igt_remove_fb(drm.fd, &s->scnd_spr);
- }
- igt_remove_fb(drm.fd, &s->prim_pri);
- igt_remove_fb(drm.fd, &s->prim_cur);
- igt_remove_fb(drm.fd, &s->prim_spr);
- igt_remove_fb(drm.fd, &s->offscreen);
- igt_remove_fb(drm.fd, &s->big);
-}
-
-static void create_fbs(enum pixel_format format, enum tiling_type tiling)
-{
- struct screen_fbs *s = &fbs[format];
-
- if (s->initialized)
- destroy_fbs(format);
-
- s->initialized = true;
-
- create_fb(format, prim_mode_params.mode.hdisplay,
- prim_mode_params.mode.vdisplay, tiling, PLANE_PRI,
- &s->prim_pri);
- create_fb(format, prim_mode_params.cursor.w,
- prim_mode_params.cursor.h, DRM_FORMAT_MOD_LINEAR,
- PLANE_CUR, &s->prim_cur);
- create_fb(format, prim_mode_params.sprite.w,
- prim_mode_params.sprite.h, tiling, PLANE_SPR, &s->prim_spr);
-
- create_fb(format, offscreen_fb.w, offscreen_fb.h, tiling, PLANE_PRI,
- &s->offscreen);
-
- create_shared_fb(format, tiling);
-
- if (!scnd_mode_params.output)
- return;
-
- create_fb(format, scnd_mode_params.mode.hdisplay,
- scnd_mode_params.mode.vdisplay, tiling, PLANE_PRI,
- &s->scnd_pri);
- create_fb(format, scnd_mode_params.cursor.w, scnd_mode_params.cursor.h,
- DRM_FORMAT_MOD_LINEAR, PLANE_CUR, &s->scnd_cur);
- create_fb(format, scnd_mode_params.sprite.w, scnd_mode_params.sprite.h,
- tiling, PLANE_SPR, &s->scnd_spr);
-}
-
-static void __set_prim_plane_for_params(struct modeset_params *params)
-{
- igt_plane_set_fb(params->primary.plane, params->primary.fb);
- igt_plane_set_position(params->primary.plane, 0, 0);
- igt_plane_set_size(params->primary.plane, params->mode.hdisplay, params->mode.vdisplay);
- igt_fb_set_position(params->primary.fb, params->primary.plane,
- params->primary.x, params->primary.y);
- igt_fb_set_size(params->primary.fb, params->primary.plane,
- params->mode.hdisplay, params->mode.vdisplay);
-}
-
-static void __set_mode_for_params(struct modeset_params *params)
-{
- igt_output_override_mode(params->output, ¶ms->mode);
- igt_output_set_pipe(params->output, params->pipe);
-
- __set_prim_plane_for_params(params);
-}
-
-static void set_mode_for_params(struct modeset_params *params)
-{
- __set_mode_for_params(params);
- igt_display_commit(&drm.display);
-}
-
-static void __debugfs_read_crtc(const char *param, char *buf, int len)
-{
- int dir;
- enum pipe pipe;
-
- pipe = prim_mode_params.pipe;
- dir = igt_debugfs_pipe_dir(drm.fd, pipe, O_DIRECTORY);
- igt_require_fd(dir);
- igt_debugfs_simple_read(dir, param, buf, len);
- close(dir);
-}
-
-#define debugfs_read_crtc(p, arr) __debugfs_read_crtc(p, arr, sizeof(arr))
-#define debugfs_write_crtc(p, arr) __debugfs_write_crtc(p, arr, sizeof(arr))
-#define debugfs_read_connector(p, arr) __debugfs_read_connector(p, arr, sizeof(arr))
-
-static bool is_drrs_high(void)
-{
- char buf[MAX_DRRS_STATUS_BUF_LEN];
-
- debugfs_read_crtc("i915_drrs_status", buf);
- return strstr(buf, "DRRS refresh rate: high");
-}
-
-static bool is_drrs_low(void)
-{
- char buf[MAX_DRRS_STATUS_BUF_LEN];
-
- debugfs_read_crtc("i915_drrs_status", buf);
- return strstr(buf, "DRRS refresh rate: low");
-}
-
-static void drrs_print_status(void)
-{
- char buf[MAX_DRRS_STATUS_BUF_LEN];
-
- debugfs_read_crtc("i915_drrs_status", buf);
- igt_info("DRRS STATUS :\n%s\n", buf);
-}
-static struct timespec fbc_get_last_action(void)
-{
- struct timespec ret = { 0, 0 };
- char buf[128];
- char *action;
- ssize_t n_read;
+/**
+ * SUBTEST: drrs-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ *
+ * arg[2]:
+ *
+ * @blt: Blitter
+ * @mmap-wc: MMAP-WC
+ * @render: Render
+ */
+/**
+ * SUBTEST: drrs-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-primscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ *
+ * arg[2]:
+ *
+ * @mmap-cpu: MMAP-CPU
+ * @mmap-gtt: MMAP-GTT
+ * @pwrite: PWRITE
+ */
- debugfs_read_crtc("i915_fbc_status", buf);
- action = strstr(buf, "\nLast action:");
- igt_assert(action);
+/**
+ * SUBTEST: drrs-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @cur: Cursor plane
+ * @pri: Primary plane
+ * @spr: Sprite plane
+ *
+ * arg[2]:
+ *
+ * @blt: Blitter
+ * @mmap-wc: MMAP-WC
+ * @render: Render
+ */
- n_read = sscanf(action, "Last action: %ld.%ld",
- &ret.tv_sec, &ret.tv_nsec);
- igt_assert(n_read == 2);
+/**
+ * SUBTEST: drrs-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-indfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @cur: Cursor plane
+ * @pri: Primary plane
+ * @spr: Sprite plane
+ *
+ * arg[2]:
+ *
+ * @mmap-cpu: MMAP-CPU
+ * @mmap-gtt: MMAP-GTT
+ * @pwrite: PWRITE
+ */
- return ret;
-}
+/**
+ * SUBTEST: drrs-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @blt: Blitter
+ * @mmap-wc: MMAP-WC
+ * @render: Render
+ */
-static bool fbc_last_action_changed(void)
-{
- struct timespec t_new, t_old;
+/**
+ * SUBTEST: drrs-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-2p-scndscrn-pri-shrfb-draw-%s
+ * Description: Draw a set of rectangles on the screen using the provided method
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @mmap-cpu: MMAP-CPU
+ * @mmap-gtt: MMAP-GTT
+ * @pwrite: PWRITE
+ */
- t_old = fbc.last_action;
- t_new = fbc_get_last_action();
+/**
+ * SUBTEST: drrs-%dp-pri-indfb-multidraw
+ * Description: Draw a set of rectangles on the screen using alternated drawing methods
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-pri-indfb-multidraw
+ * Description: Draw a set of rectangles on the screen using alternated drawing methods
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-pri-indfb-multidraw
+ * Description: Draw a set of rectangles on the screen using alternated drawing methods
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-pri-indfb-multidraw
+ * Description: Draw a set of rectangles on the screen using alternated drawing methods
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-pri-indfb-multidraw
+ * Description: Draw a set of rectangles on the screen using alternated drawing methods
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-pri-indfb-multidraw
+ * Description: Draw a set of rectangles on the screen using alternated drawing methods
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-pri-indfb-multidraw
+ * Description: Draw a set of rectangles on the screen using alternated drawing methods
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ */
- fbc.last_action = t_new;
+/**
+ * SUBTEST: drrs-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @rgb101010: FORMAT_RGB101010
+ * @rgb565: FORMAT_RGB565
+ *
+ * arg[2]:
+ *
+ * @blt: Blitter
+ * @mmap-wc: MMAP-WC
+ * @render: Render
+ */
-#if 0
- igt_info("old: %ld.%ld\n", t_old.tv_sec, t_old.tv_nsec);
- igt_info("new: %ld.%ld\n", t_new.tv_sec, t_new.tv_nsec);
-#endif
+/**
+ * SUBTEST: drrs-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%s-draw-%s
+ * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @rgb101010: FORMAT_RGB101010
+ * @rgb565: FORMAT_RGB565
+ *
+ * arg[2]:
+ *
+ * @mmap-cpu: MMAP-CPU
+ * @mmap-gtt: MMAP-GTT
+ * @pwrite: PWRITE
+ */
- return t_old.tv_sec != t_new.tv_sec ||
- t_old.tv_nsec != t_new.tv_nsec;
-}
+/**
+ * SUBTEST: drrs-slowdraw
+ * Description: Sleep a little bit between drawing operations with DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-slowdraw
+ * Description: Sleep a little bit between drawing operations with PSR
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-slowdraw
+ * Description: Sleep a little bit between drawing operations with FBC & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-slowdraw
+ * Description: Sleep a little bit between drawing operations with FBC & PSR
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-slowdraw
+ * Description: Sleep a little bit between drawing operations with PSR & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-slowdraw
+ * Description: Sleep a little bit between drawing operations with FBC, PSR & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
-static void fbc_update_last_action(void)
-{
- if (!fbc.supports_last_action)
- return;
+/**
+ * SUBTEST: drrs-%dp-primscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-primscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-primscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-primscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-primscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-primscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ *
+ * arg[2]:
+ *
+ * @indfb: Individual fb
+ * @shrfb: Shared fb
+ *
+ * arg[3]:
+ *
+ * @ms: Modeset
+ * @pg: Page flip
+ * @pl: Plane change
+ */
- fbc.last_action = fbc_get_last_action();
+/**
+ * SUBTEST: drrs-2p-scndscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-2p-scndscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-2p-scndscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-2p-scndscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-2p-scndscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-2p-scndscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-%sflip-blt
+ * Description: Just exercise page flips with the patterns we have
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @indfb: Individual fb
+ * @shrfb: Shared fb
+ *
+ * arg[2]:
+ *
+ * @ms: Modeset
+ * @pg: Page flip
+ * @pl: Plane change
+ */
-#if 0
- igt_info("Last action: %ld.%ld\n",
- fbc.last_action.tv_sec, fbc.last_action.tv_nsec);
-#endif
-}
+/**
+ * SUBTEST: fbc-%dp-%s-fliptrack-mmap-gtt
+ * Description: Check if the hardware tracking works after page flips
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-%s-fliptrack-mmap-gtt
+ * Description: Check if the hardware tracking works after page flips
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-%s-fliptrack-mmap-gtt
+ * Description: Check if the hardware tracking works after page flips
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-%s-fliptrack-mmap-gtt
+ * Description: Check if the hardware tracking works after page flips
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ *
+ * arg[2]:
+ *
+ * @indfb: Individual fb
+ * @shrfb: Shared fb
+ */
-static void fbc_setup_last_action(void)
-{
- ssize_t n_read;
- char buf[128];
- char *action;
+/**
+ * SUBTEST: drrs-%dp-primscrn-%s-indfb-move
+ * Description: Just move the %arg[2] around
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-primscrn-%s-indfb-move
+ * Description: Just move the %arg[2] around
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-primscrn-%s-indfb-move
+ * Description: Just move the %arg[2] around
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-move
+ * Description: Just move the %arg[2] around
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-move
+ * Description: Just move the %arg[2] around
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-primscrn-%s-indfb-move
+ * Description: Just move the %arg[2] around
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-indfb-move
+ * Description: Just move the %arg[2] around
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ *
+ * arg[2]:
+ *
+ * @spr: Sprite plane
+ * @cur: Cursor plane
+ */
+/**
+ * SUBTEST: drrs-2p-scndscrn-%s-indfb-move
+ * Description: Just move the %arg[1] around
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-2p-scndscrn-%s-indfb-move
+ * Description: Just move the %arg[1] around
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-2p-scndscrn-%s-indfb-move
+ * Description: Just move the %arg[1] around
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-move
+ * Description: Just move the %arg[1] around
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-move
+ * Description: Just move the %arg[1] around
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-2p-scndscrn-%s-indfb-move
+ * Description: Just move the %arg[1] around
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-indfb-move
+ * Description: Just move the %arg[1] around
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @spr: Sprite plane
+ * @cur: Cursor plane
+ */
- debugfs_read_crtc("i915_fbc_status", buf);
- action = strstr(buf, "\nLast action:");
- if (!action) {
- igt_info("FBC last action not supported\n");
- return;
- }
+/**
+ * SUBTEST: drrs-%dp-primscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[2] a few times
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-primscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[2] a few times
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-primscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[2] a few times
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[2] a few times
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[2] a few times
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-primscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[2] a few times
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[2] a few times
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ *
+ * arg[2]:
+ *
+ * @spr: Sprite plane
+ * @cur: Cursor plane
+ */
- fbc.supports_last_action = true;
+/**
+ * SUBTEST: drrs-2p-scndscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[1] a few times
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-2p-scndscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[1] a few times
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-2p-scndscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[1] a few times
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[1] a few times
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[1] a few times
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-2p-scndscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[1] a few times
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-indfb-onoff
+ * Description: Just enable and disable the %arg[1] a few times
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @spr: Sprite plane
+ * @cur: Cursor plane
+ */
- n_read = sscanf(action, "Last action: %ld.%ld",
- &fbc.last_action.tv_sec, &fbc.last_action.tv_nsec);
- igt_assert(n_read == 2);
-}
+/**
+ * SUBTEST: drrs-%dp-primscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%dp-primscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%dp-primscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%dp-primscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%dp-primscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%dp-primscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%dp-primscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: drrs-2p-scndscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-2p-scndscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-2p-scndscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-2p-scndscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-2p-scndscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-2p-scndscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-2p-scndscrn-spr-indfb-fullscreen
+ * Description: Put a fullscreen plane covering the whole screen
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1].values: 1, 2
+ */
-static bool fbc_is_compressing(void)
-{
- char buf[128];
+/**
+ * SUBTEST: drrs-%s-scaledprimary
+ * Description: Try different primary plane scaling strategies
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-%s-scaledprimary
+ * Description: Try different primary plane scaling strategies
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-%s-scaledprimary
+ * Description: Try different primary plane scaling strategies
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-%s-scaledprimary
+ * Description: Try different primary plane scaling strategies
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-%s-scaledprimary
+ * Description: Try different primary plane scaling strategies
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-%s-scaledprimary
+ * Description: Try different primary plane scaling strategies
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-%s-scaledprimary
+ * Description: Try different primary plane scaling strategies
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @indfb: Individual fb
+ * @shrfb: Shared fb
+ */
- debugfs_read_crtc("i915_fbc_status", buf);
- return strstr(buf, "\nCompressing: yes\n") != NULL;
-}
+/**
+ * SUBTEST: drrs-modesetfrombusy
+ * Description: Modeset from a busy buffer to a non-busy buffer with DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-modesetfrombusy
+ * Description: Modeset from a busy buffer to a non-busy buffer with FBC
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-modesetfrombusy
+ * Description: Modeset from a busy buffer to a non-busy buffer with PSR
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-modesetfrombusy
+ * Description: Modeset from a busy buffer to a non-busy buffer with FBC & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-modesetfrombusy
+ * Description: Modeset from a busy buffer to a non-busy buffer with FBC & PSR
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-modesetfrombusy
+ * Description: Modeset from a busy buffer to a non-busy buffer with PSR & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-modesetfrombusy
+ * Description: Modeset from a busy buffer to a non-busy buffer with FBC, PSR & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr, scaling
+ * Mega feature: General Display Features
+ */
-static bool fbc_wait_for_compression(void)
-{
- return igt_wait(fbc_is_compressing(), 2000, 1);
-}
+/**
+ * SUBTEST: drrs-suspend
+ * Description: Make sure suspend/resume keeps us on the same state of DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-suspend
+ * Description: Make sure suspend/resume keeps us on the same state of FBC
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-suspend
+ * Description: Make sure suspend/resume keeps us on the same state of PSR
+ * Driver requirement: i915, xe
+ * Functionality: fbt, psr, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-suspend
+ * Description: Make sure suspend/resume keeps us on the same state of FBC & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-suspend
+ * Description: Make sure suspend/resume keeps us on the same state of FBC & PSR
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-suspend
+ * Description: Make sure suspend/resume keeps us on the same state of PSR & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbt, psr, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-suspend
+ * Description: Make sure suspend/resume keeps us on the same state of FBC, PSR & DRRS
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
-static bool fbc_not_enough_stolen(void)
-{
- char buf[128];
+/**
+ * SUBTEST: drrs-farfromfence-mmap-gtt
+ * Description: Test drawing as far from the fence start as possible
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbc-farfromfence-mmap-gtt
+ * Description: Test drawing as far from the fence start as possible
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psr-farfromfence-mmap-gtt
+ * Description: Test drawing as far from the fence start as possible
+ * Driver requirement: i915
+ * Functionality: fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-farfromfence-mmap-gtt
+ * Description: Test drawing as far from the fence start as possible
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-farfromfence-mmap-gtt
+ * Description: Test drawing as far from the fence start as possible
+ * Driver requirement: i915
+ * Functionality: fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: psrdrrs-farfromfence-mmap-gtt
+ * Description: Test drawing as far from the fence start as possible
+ * Driver requirement: i915
+ * Functionality: drrs, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-farfromfence-mmap-gtt
+ * Description: Test drawing as far from the fence start as possible
+ * Driver requirement: i915
+ * Functionality: drrs, fbc, fbt, kms_core, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
- debugfs_read_crtc("i915_fbc_status", buf);
- return strstr(buf, "FBC disabled: not enough stolen memory\n");
-}
+/**
+ * SUBTEST: fbc-stridechange
+ * Description: Change the frontbuffer stride by doing a modeset
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-stridechange
+ * Description: Change the frontbuffer stride by doing a modeset
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-stridechange
+ * Description: Change the frontbuffer stride by doing a modeset
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-stridechange
+ * Description: Change the frontbuffer stride by doing a modeset
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
-static bool fbc_stride_not_supported(void)
-{
- char buf[128];
+/**
+ * SUBTEST: fbc-tiling-%s
+ * Description: Test %arg[1] formats, if the tiling format supports FBC do the
+ * basic drawing test, else set the mode & test if FBC is disabled
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcdrrs-tiling-%s
+ * Description: Test %arg[1] formats, if the tiling format supports FBC do the
+ * basic drawing test, else set the mode & test if FBC is disabled
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsr-tiling-%s
+ * Description: Test %arg[1] formats, if the tiling format supports FBC do the
+ * basic drawing test, else set the mode & test if FBC is disabled
+ * Driver requirement: i915, xe
+ * Functionality: fbc, fbt, psr, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fbcpsrdrrs-tiling-%s
+ * Description: Test %arg[1] formats, if the tiling format supports FBC do the
+ * basic drawing test, else set the mode & test if FBC is disabled
+ * Driver requirement: i915, xe
+ * Functionality: drrs, fbc, fbt, psr, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4: 4 tiling
+ * @linear: Linear tiling
+ * @y: Y tiling
+ */
- debugfs_read_crtc("i915_fbc_status", buf);
- return strstr(buf, "FBC disabled: framebuffer stride not supported\n");
-}
+/**
+ * SUBTEST: basic
+ * Description: Do some basic operations regardless of which features are enabled
+ * Driver requirement: i915, xe
+ * Functionality: fbt
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
-static bool fbc_mode_too_large(void)
-{
- char buf[128];
+#define TIME SLOW_QUICK(1000, 10000)
- debugfs_read_crtc("i915_fbc_status", buf);
- return strstr(buf, "FBC disabled: mode too large for compression\n");
-}
+IGT_TEST_DESCRIPTION("Test the Kernel's frontbuffer tracking mechanism and "
+ "its related features: FBC, PSR and DRRS");
-static bool drrs_wait_until_rr_switch_to_low(void)
-{
- return igt_wait(is_drrs_low(), 5000, 1);
-}
+/*
+ * One of the aspects of this test is that, for every subtest, we try different
+ * combinations of the parameters defined by the struct below. Because of this,
+ * a single addition of a new parameter or subtest function can lead to hundreds
+ * of new subtests.
+ *
+ * In order to reduce the number combinations we cut the cases that don't make
+ * sense, such as writing on the secondary screen when there is only a single
+ * pipe, or flipping when the target is the offscreen buffer. We also hide some
+ * combinations that are somewhat redundant and don't add much value to the
+ * test. For example, since we already do the offscreen testing with a single
+ * pipe enabled, there's no much value in doing it again with dual pipes. If you
+ * still want to try these redundant tests, you need to use the --show-hidden
+ * option.
+ *
+ * The most important hidden thing is the FEATURE_NONE set of tests. Whenever
+ * you get a failure on any test, it is important to check whether the same test
+ * fails with FEATURE_NONE - replace the feature name for "nop". If the nop test
+ * also fails, then it's likely the problem will be on the IGT side instead of
+ * the Kernel side. We don't expose this set of tests by default because (i)
+ * they take a long time to test; and (ii) if the feature tests work, then it's
+ * very likely that the nop tests will also work.
+ */
+struct test_mode {
+ /* Are we going to enable just one monitor, or are we going to setup a
+ * dual screen environment for the test? */
+ enum {
+ PIPE_SINGLE = 0,
+ PIPE_DUAL,
+ PIPE_COUNT,
+ } pipes;
-static struct rect pat1_get_rect(struct fb_region *fb, int r)
-{
- struct rect rect;
+ /* The primary screen is the one that's supposed to have the "feature"
+ * enabled on, but we have the option to draw on the secondary screen or
+ * on some offscreen buffer. We also only theck the CRC of the primary
+ * screen. */
+ enum {
+ SCREEN_PRIM = 0,
+ SCREEN_SCND,
+ SCREEN_OFFSCREEN,
+ SCREEN_COUNT,
+ } screen;
- switch (r) {
- case 0:
- rect.x = 0;
- rect.y = 0;
- rect.w = fb->w / 8;
- rect.h = fb->h / 8;
- rect.color = pick_color(fb->fb, COLOR_GREEN);
- break;
- case 1:
- rect.x = fb->w / 8 * 4;
- rect.y = fb->h / 8 * 4;
- rect.w = fb->w / 8 * 2;
- rect.h = fb->h / 8 * 2;
- rect.color = pick_color(fb->fb, COLOR_RED);
- break;
- case 2:
- rect.x = fb->w / 16 + 1;
- rect.y = fb->h / 16 + 1;
- rect.w = fb->w / 8 + 1;
- rect.h = fb->h / 8 + 1;
- rect.color = pick_color(fb->fb, COLOR_MAGENTA);
- break;
- case 3:
- rect.x = fb->w - 1;
- rect.y = fb->h - 1;
- rect.w = 1;
- rect.h = 1;
- rect.color = pick_color(fb->fb, COLOR_CYAN);
- break;
- default:
- igt_assert(false);
- }
+ /* When we draw, we can draw directly on the primary plane, on the
+ * cursor or on the sprite plane. */
+ enum {
+ PLANE_PRI = 0,
+ PLANE_CUR,
+ PLANE_SPR,
+ PLANE_COUNT,
+ } plane;
- return rect;
-}
+ /* We can organize the screens in a way that each screen has its own
+ * framebuffer, or in a way that all screens point to the same
+ * framebuffer, but on different places. This includes the offscreen
+ * screen. */
+ enum {
+ FBS_INDIVIDUAL = 0,
+ FBS_SHARED,
+ FBS_COUNT,
+ } fbs;
-static struct rect pat2_get_rect(struct fb_region *fb, int r)
-{
- struct rect rect;
+ /* Which features are we going to test now? This is a mask!
+ * FEATURE_DEFAULT is a special value which instruct the test to just
+ * keep what's already enabled by default in the Kernel. */
+ enum {
+ FEATURE_NONE = 0,
+ FEATURE_FBC = 1,
+ FEATURE_PSR = 2,
+ FEATURE_DRRS = 4,
+ FEATURE_COUNT = 8,
+ FEATURE_DEFAULT = 8,
+ } feature;
- rect.x = 0;
- rect.y = 0;
- rect.w = 64;
- rect.h = 64;
+ /* Possible pixel formats. We just use FORMAT_DEFAULT for most tests and
+ * only test a few things on the other formats. */
+ enum pixel_format {
+ FORMAT_RGB888 = 0,
+ FORMAT_RGB565,
+ FORMAT_RGB101010,
+ FORMAT_COUNT,
+ FORMAT_DEFAULT = FORMAT_RGB888,
+ } format;
- switch (r) {
- case 0:
- rect.color = pick_color(fb->fb, COLOR_GREEN);
- break;
- case 1:
- rect.x = 31;
- rect.y = 31;
- rect.w = 31;
- rect.h = 31;
- rect.color = pick_color(fb->fb, COLOR_RED);
- break;
- case 2:
- rect.x = 16;
- rect.y = 16;
- rect.w = 32;
- rect.h = 32;
- rect.color = pick_color(fb->fb, COLOR_MAGENTA);
- break;
- case 3:
- rect.color = pick_color(fb->fb, COLOR_CYAN);
- break;
- default:
- igt_assert(false);
- }
+ /* There are multiple APIs where we can do the equivalent of a page flip
+ * and they exercise slightly different codepaths inside the Kernel. */
+ enum flip_type {
+ FLIP_PAGEFLIP,
+ FLIP_MODESET,
+ FLIP_PLANES,
+ FLIP_COUNT,
+ } flip;
- return rect;
-}
+ enum tiling_type {
+ TILING_LINEAR = 0,
+ TILING_X,
+ TILING_Y,
+ TILING_4,
+ TILING_COUNT,
+ TILING_DEFAULT = TILING_X,
+ } tiling;
-static struct rect pat3_get_rect(struct fb_region *fb, int r)
-{
- struct rect rect;
+ enum igt_draw_method method;
+};
- rect.w = 64;
- rect.h = 64;
- rect.color = pick_color(fb->fb, COLOR_GREEN);
+enum color {
+ COLOR_RED,
+ COLOR_GREEN,
+ COLOR_BLUE,
+ COLOR_MAGENTA,
+ COLOR_CYAN,
+ COLOR_SCND_BG,
+ COLOR_PRIM_BG = COLOR_BLUE,
+ COLOR_OFFSCREEN_BG = COLOR_SCND_BG,
+};
- switch (r) {
- case 0:
- rect.x = 0;
- rect.y = 0;
- break;
- case 1:
- rect.x = 64;
- rect.y = 64;
- break;
- case 2:
- rect.x = 1;
- rect.y = 1;
- break;
- case 3:
- rect.x = fb->w - 64;
- rect.y = fb->h - 64;
- break;
- case 4:
- rect.x = fb->w / 2 - 32;
- rect.y = fb->h / 2 - 32;
- break;
- default:
- igt_assert(false);
- }
+struct rect {
+ int x;
+ int y;
+ int w;
+ int h;
+ uint32_t color;
+};
- return rect;
-}
+struct {
+ int fd;
+ int debugfs;
+ igt_display_t display;
-static struct rect pat4_get_rect(struct fb_region *fb, int r)
-{
- struct rect rect;
+ struct buf_ops *bops;
+} drm;
- igt_assert_eq(r, 0);
+struct {
+ bool can_test;
- rect.x = 0;
- rect.y = 0;
- rect.w = fb->w;
- rect.h = fb->h;
- rect.color = pick_color(fb->fb, COLOR_GREEN);
+ bool supports_last_action;
- return rect;
-}
+ struct timespec last_action;
+} fbc = {
+ .can_test = false,
+ .supports_last_action = false,
+};
-static void fb_dirty_ioctl(struct fb_region *fb, struct rect *rect)
-{
- int rc;
- drmModeClip clip = {
- .x1 = rect->x,
- .x2 = rect->x + rect->w,
- .y1 = rect->y,
- .y2 = rect->y + rect->h,
- };
+struct {
+ bool can_test;
+} psr = {
+ .can_test = false,
+};
- rc = drmModeDirtyFB(drm.fd, fb->fb->fb_id, &clip, 1);
+#define MAX_DRRS_STATUS_BUF_LEN 256
- igt_assert(rc == 0 || rc == -ENOSYS);
-}
+struct {
+ bool can_test;
+} drrs = {
+ .can_test = false,
+};
-static void draw_rect(struct draw_pattern_info *pattern, struct fb_region *fb,
- enum igt_draw_method method, int r)
-{
- struct rect rect = pattern->get_rect(fb, r);
+igt_pipe_crc_t *pipe_crc;
+igt_crc_t *wanted_crc;
+struct {
+ bool initialized;
+ igt_crc_t crc;
+} blue_crcs[FORMAT_COUNT];
- igt_draw_rect_fb(drm.fd, drm.bops, 0, fb->fb, method,
- fb->x + rect.x, fb->y + rect.y,
- rect.w, rect.h, rect.color);
+/* The goal of this structure is to easily allow us to deal with cases where we
+ * have a big framebuffer and the CRTC is just displaying a subregion of this
+ * big FB. */
+struct fb_region {
+ igt_plane_t *plane;
+ struct igt_fb *fb;
+ int x;
+ int y;
+ int w;
+ int h;
+};
- fb_dirty_ioctl(fb, &rect);
-}
+struct draw_pattern_info {
+ bool frames_stack;
+ int n_rects;
+ struct rect (*get_rect)(struct fb_region *fb, int r);
-static void draw_rect_igt_fb(struct draw_pattern_info *pattern,
- struct igt_fb *fb, enum igt_draw_method method,
- int r)
-{
- struct fb_region region = {
- .fb = fb,
- .x = 0,
- .y = 0,
- .w = fb->width,
- .h = fb->height,
- };
+ bool initialized[FORMAT_COUNT];
+ igt_crc_t *crcs[FORMAT_COUNT];
+};
- draw_rect(pattern, ®ion, method, r);
-}
+/* Draw big rectangles on the screen. */
+struct draw_pattern_info pattern1;
+/* 64x64 rectangles at x:0,y:0, just so we can draw on the cursor and sprite. */
+struct draw_pattern_info pattern2;
+/* 64x64 rectangles at different positions, same color, for the move test. */
+struct draw_pattern_info pattern3;
+/* Just a fullscreen green square. */
+struct draw_pattern_info pattern4;
-static void fill_fb_region(struct fb_region *region, enum color ecolor)
-{
- uint32_t color = pick_color(region->fb, ecolor);
+/* Command line parameters. */
+struct {
+ bool check_status;
+ bool check_crc;
+ bool fbc_check_compression;
+ bool fbc_check_last_action;
+ bool no_edp;
+ bool small_modes;
+ bool show_hidden;
+ int step;
+ int only_pipes;
+ int shared_fb_x_offset;
+ int shared_fb_y_offset;
+ enum tiling_type tiling;
+} opt = {
+ .check_status = true,
+ .check_crc = true,
+ .fbc_check_compression = true,
+ .fbc_check_last_action = true,
+ .no_edp = false,
+ .small_modes = false,
+ .show_hidden= false,
+ .step = 0,
+ .only_pipes = PIPE_COUNT,
+ .shared_fb_x_offset = 248,
+ .shared_fb_y_offset = 500,
+ .tiling = TILING_DEFAULT,
+};
- igt_draw_rect_fb(drm.fd, drm.bops, 0, region->fb, IGT_DRAW_BLT,
- region->x, region->y, region->w, region->h,
- color);
-}
+struct modeset_params {
+ enum pipe pipe;
+ igt_output_t *output;
+ drmModeModeInfo mode;
-static void _fb_dirty_ioctl(struct fb_region *region)
-{
- struct rect rect;
+ struct fb_region primary;
+ struct fb_region cursor;
+ struct fb_region sprite;
+};
- rect.x = region->x;
- rect.y = region->y;
- rect.w = region->w;
- rect.h = region->h;
- fb_dirty_ioctl(region, &rect);
-}
+struct modeset_params prim_mode_params;
+struct modeset_params scnd_mode_params;
-static void unset_all_crtcs(void)
-{
- igt_display_reset(&drm.display);
- igt_display_commit(&drm.display);
-}
+struct fb_region offscreen_fb;
+struct screen_fbs {
+ bool initialized;
-static bool disable_features(const struct test_mode *t)
-{
- if (t->feature == FEATURE_DEFAULT)
- return false;
+ struct igt_fb prim_pri;
+ struct igt_fb prim_cur;
+ struct igt_fb prim_spr;
- intel_fbc_disable(drm.fd);
- intel_drrs_disable(drm.fd, prim_mode_params.pipe);
+ struct igt_fb scnd_pri;
+ struct igt_fb scnd_cur;
+ struct igt_fb scnd_spr;
- return psr.can_test ? psr_disable(drm.fd, drm.debugfs) : false;
-}
+ struct igt_fb offscreen;
+ struct igt_fb big;
+} fbs[FORMAT_COUNT];
-static void *busy_thread_func(void *data)
-{
- while (!busy_thread.stop)
- igt_draw_rect(drm.fd, drm.bops, 0, busy_thread.handle,
- busy_thread.size, busy_thread.stride,
- busy_thread.tiling, IGT_DRAW_BLT, 0, 0,
- busy_thread.width, busy_thread.height,
- busy_thread.color, busy_thread.bpp);
+struct {
+ pthread_t thread;
+ bool stop;
- pthread_exit(0);
-}
+ uint32_t handle;
+ uint32_t size;
+ uint32_t stride;
+ int width;
+ int height;
+ uint32_t color;
+ int bpp;
+ uint32_t tiling;
+} busy_thread = {
+ .stop = true,
+};
-static void start_busy_thread(struct igt_fb *fb)
+static drmModeModeInfo *get_connector_smallest_mode(igt_output_t *output)
{
- int rc;
+ drmModeConnector *c = output->config.connector;
+ const drmModeModeInfo *smallest = NULL;
+ int i;
- igt_assert(busy_thread.stop == true);
- busy_thread.stop = false;
- busy_thread.handle = fb->gem_handle;
- busy_thread.size = fb->size;
- busy_thread.stride = fb->strides[0];
- busy_thread.width = fb->width;
- busy_thread.height = fb->height;
- busy_thread.color = pick_color(fb, COLOR_PRIM_BG);
- busy_thread.bpp = igt_drm_format_to_bpp(fb->drm_format);
- busy_thread.tiling = igt_fb_mod_to_tiling(fb->modifier);
+ if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
+ return igt_std_1024_mode_get(igt_output_preferred_vrefresh(output));
- rc = pthread_create(&busy_thread.thread, NULL, busy_thread_func, NULL);
- igt_assert_eq(rc, 0);
+ for (i = 0; i < c->count_modes; i++) {
+ const drmModeModeInfo *mode = &c->modes[i];
+
+ if (!smallest ||
+ mode->hdisplay * mode->vdisplay <
+ smallest->hdisplay * smallest->vdisplay)
+ smallest = mode;
+ }
+
+ if (smallest)
+ return igt_memdup(smallest, sizeof(*smallest));
+ else
+ return igt_std_1024_mode_get(60);
}
-static void stop_busy_thread(void)
+static drmModeModeInfo *connector_get_mode(igt_output_t *output)
{
- if (!busy_thread.stop) {
- busy_thread.stop = true;
- igt_assert(pthread_join(busy_thread.thread, NULL) == 0);
- }
+ /* On HSW the CRC WA is so awful that it makes you think everything is
+ * bugged. */
+ if (IS_HASWELL(intel_get_drm_devid(drm.fd)) &&
+ output->config.connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+ return igt_std_1024_mode_get(igt_output_preferred_vrefresh(output));
+
+ if (opt.small_modes)
+ return get_connector_smallest_mode(output);
+ else
+ return igt_memdup(&output->config.default_mode,
+ sizeof(output->config.default_mode));
}
-static void print_crc(const char *str, igt_crc_t *crc)
+static void init_mode_params(struct modeset_params *params,
+ igt_output_t *output, enum pipe pipe)
{
- char *pipe_str;
+ drmModeModeInfo *mode;
- pipe_str = igt_crc_to_string(crc);
+ igt_output_override_mode(output, NULL);
+ mode = connector_get_mode(output);
- igt_debug("%s pipe:[%s]\n", str, pipe_str);
+ params->pipe = pipe;
+ params->output = output;
+ params->mode = *mode;
- free(pipe_str);
-}
+ params->primary.plane = igt_pipe_get_plane_type(&drm.display.pipes[pipe], DRM_PLANE_TYPE_PRIMARY);
+ params->primary.fb = NULL;
+ params->primary.x = 0;
+ params->primary.y = 0;
+ params->primary.w = mode->hdisplay;
+ params->primary.h = mode->vdisplay;
-static void collect_crc(igt_crc_t *crc)
-{
- igt_pipe_crc_collect_crc(pipe_crc, crc);
-}
+ params->cursor.plane = igt_pipe_get_plane_type(&drm.display.pipes[pipe], DRM_PLANE_TYPE_CURSOR);
+ params->cursor.fb = NULL;
+ params->cursor.x = 0;
+ params->cursor.y = 0;
+ params->cursor.w = 64;
+ params->cursor.h = 64;
-static void init_blue_crc(enum pixel_format format, enum tiling_type tiling)
-{
- struct igt_fb blue;
+ params->sprite.plane = igt_pipe_get_plane_type(&drm.display.pipes[pipe], DRM_PLANE_TYPE_OVERLAY);
+ igt_require(params->sprite.plane);
+ params->sprite.fb = NULL;
+ params->sprite.x = 0;
+ params->sprite.y = 0;
+ params->sprite.w = 64;
+ params->sprite.h = 64;
- if (blue_crcs[format].initialized)
- return;
+ free(mode);
+}
- create_fb(format, prim_mode_params.mode.hdisplay,
- prim_mode_params.mode.vdisplay, tiling, PLANE_PRI,
- &blue);
+static bool find_connector(bool edp_only, bool pipe_a,
+ igt_output_t *forbidden_output,
+ enum pipe forbidden_pipe,
+ igt_output_t **ret_output,
+ enum pipe *ret_pipe)
+{
+ igt_output_t *output;
+ enum pipe pipe;
- fill_fb(&blue, COLOR_PRIM_BG);
+ for_each_pipe_with_valid_output(&drm.display, pipe, output) {
+ drmModeConnectorPtr c = output->config.connector;
- igt_output_set_pipe(prim_mode_params.output, prim_mode_params.pipe);
- igt_output_override_mode(prim_mode_params.output, &prim_mode_params.mode);
- igt_plane_set_fb(prim_mode_params.primary.plane, &blue);
- igt_display_commit(&drm.display);
+ if (edp_only && c->connector_type != DRM_MODE_CONNECTOR_eDP)
+ continue;
- if (!pipe_crc) {
- pipe_crc = igt_pipe_crc_new(drm.fd, prim_mode_params.pipe,
- IGT_PIPE_CRC_SOURCE_AUTO);
- igt_assert(pipe_crc);
- }
+ if (pipe_a && pipe != PIPE_A)
+ continue;
- collect_crc(&blue_crcs[format].crc);
+ if (output == forbidden_output || pipe == forbidden_pipe) {
+ igt_output_set_pipe(output, pipe);
+ igt_output_override_mode(output, connector_get_mode(output));
- print_crc("Blue CRC: ", &blue_crcs[format].crc);
+ continue;
+ }
- igt_display_reset(&drm.display);
+ if (c->connector_type == DRM_MODE_CONNECTOR_eDP && opt.no_edp)
+ continue;
- igt_remove_fb(drm.fd, &blue);
+ igt_output_set_pipe(output, pipe);
+ igt_output_override_mode(output, connector_get_mode(output));
+ if (i915_pipe_output_combo_valid(&drm.display)) {
+ *ret_output = output;
+ *ret_pipe = pipe;
+ return true;
+ }
+ }
- blue_crcs[format].initialized = true;
+ return false;
}
-static void init_crcs(enum pixel_format format, enum tiling_type tiling,
- struct draw_pattern_info *pattern)
+static bool init_modeset_cached_params(void)
{
- int r, r_;
- struct igt_fb tmp_fbs[pattern->n_rects];
+ igt_output_t *prim_output = NULL, *scnd_output = NULL;
+ enum pipe prim_pipe, scnd_pipe;
- if (pattern->initialized[format])
- return;
+ /*
+ * We have this problem where PSR is only present on eDP monitors and
+ * FBC is only present on pipe A for some platforms. So we search first
+ * for the ideal case of eDP supporting pipe A, and try the less optimal
+ * configs later, sacrificing one of the features.
+ * TODO: refactor the code in a way that allows us to have different
+ * sets of prim/scnd structs for different features.
+ */
+ find_connector(true, true, NULL, PIPE_NONE, &prim_output, &prim_pipe);
+ if (!prim_output)
+ find_connector(true, false, NULL, PIPE_NONE, &prim_output, &prim_pipe);
+ if (!prim_output)
+ find_connector(false, true, NULL, PIPE_NONE, &prim_output, &prim_pipe);
+ if (!prim_output)
+ find_connector(false, false, NULL, PIPE_NONE, &prim_output, &prim_pipe);
- pattern->crcs[format] = calloc(pattern->n_rects,
- sizeof(*(pattern->crcs[format])));
+ if (!prim_output)
+ return false;
- for (r = 0; r < pattern->n_rects; r++)
- create_fb(format, prim_mode_params.mode.hdisplay,
- prim_mode_params.mode.vdisplay, tiling,
- PLANE_PRI, &tmp_fbs[r]);
+ find_connector(false, false, prim_output, prim_pipe,
+ &scnd_output, &scnd_pipe);
- for (r = 0; r < pattern->n_rects; r++)
- fill_fb(&tmp_fbs[r], COLOR_PRIM_BG);
+ init_mode_params(&prim_mode_params, prim_output, prim_pipe);
- if (pattern->frames_stack) {
- for (r = 0; r < pattern->n_rects; r++)
- for (r_ = 0; r_ <= r; r_++)
- draw_rect_igt_fb(pattern, &tmp_fbs[r],
- igt_draw_supports_method(drm.fd, IGT_DRAW_PWRITE) ?
- IGT_DRAW_PWRITE : IGT_DRAW_RENDER,
- r_);
- } else {
- for (r = 0; r < pattern->n_rects; r++)
- draw_rect_igt_fb(pattern, &tmp_fbs[r], igt_draw_supports_method(drm.fd, IGT_DRAW_PWRITE) ?
- IGT_DRAW_PWRITE : IGT_DRAW_RENDER, r);
+ if (!scnd_output) {
+ scnd_mode_params.pipe = PIPE_NONE;
+ scnd_mode_params.output = NULL;
+ return true;
}
- igt_output_set_pipe(prim_mode_params.output, prim_mode_params.pipe);
- igt_output_override_mode(prim_mode_params.output, &prim_mode_params.mode);
- for (r = 0; r < pattern->n_rects; r++) {
- igt_plane_set_fb(prim_mode_params.primary.plane, &tmp_fbs[r]);
- igt_display_commit(&drm.display);
-
- collect_crc(&pattern->crcs[format][r]);
- }
+ init_mode_params(&scnd_mode_params, scnd_output, scnd_pipe);
+ return true;
+}
- for (r = 0; r < pattern->n_rects; r++) {
- igt_debug("Rect %d CRC:", r);
- print_crc("", &pattern->crcs[format][r]);
+static uint64_t tiling_to_modifier(enum tiling_type tiling)
+{
+ switch (tiling) {
+ case TILING_LINEAR:
+ return DRM_FORMAT_MOD_LINEAR;
+ case TILING_X:
+ return I915_FORMAT_MOD_X_TILED;
+ case TILING_Y:
+ return I915_FORMAT_MOD_Y_TILED;
+ case TILING_4:
+ return I915_FORMAT_MOD_4_TILED;
+ default:
+ igt_assert(false);
}
-
- igt_display_reset(&drm.display);
-
- for (r = 0; r < pattern->n_rects; r++)
- igt_remove_fb(drm.fd, &tmp_fbs[r]);
-
- pattern->initialized[format] = true;
}
-static void setup_drm(void)
+static void create_fb(enum pixel_format pformat, int width, int height,
+ enum tiling_type tiling, int plane, struct igt_fb *fb)
{
- drm.fd = drm_open_driver_master(DRIVER_INTEL | DRIVER_XE);
- drm.debugfs = igt_debugfs_dir(drm.fd);
-
- kmstest_set_vt_graphics_mode();
- igt_display_require(&drm.display, drm.fd);
+ uint32_t format;
+ uint64_t size, modifier;
+ unsigned int stride;
- drm.bops = buf_ops_create(drm.fd);
-}
+ switch (pformat) {
+ case FORMAT_RGB888:
+ if (plane == PLANE_CUR)
+ format = DRM_FORMAT_ARGB8888;
+ else
+ format = DRM_FORMAT_XRGB8888;
+ break;
+ case FORMAT_RGB565:
+ /* Only the primary plane supports 16bpp! */
+ if (plane == PLANE_PRI)
+ format = DRM_FORMAT_RGB565;
+ else if (plane == PLANE_CUR)
+ format = DRM_FORMAT_ARGB8888;
+ else
+ format = DRM_FORMAT_XRGB8888;
+ break;
+ case FORMAT_RGB101010:
+ if (plane == PLANE_PRI)
+ format = DRM_FORMAT_XRGB2101010;
+ else if (plane == PLANE_CUR)
+ format = DRM_FORMAT_ARGB8888;
+ else
+ format = DRM_FORMAT_XRGB8888;
+ break;
+ default:
+ igt_assert(false);
+ }
-static void teardown_drm(void)
-{
- buf_ops_destroy(drm.bops);
- igt_display_fini(&drm.display);
- drm_close_driver(drm.fd);
-}
+ modifier = tiling_to_modifier(tiling);
-static void setup_modeset(void)
-{
- igt_require(init_modeset_cached_params());
- offscreen_fb.fb = NULL;
- offscreen_fb.w = 1024;
- offscreen_fb.h = 1024;
- create_fbs(FORMAT_DEFAULT, opt.tiling);
-}
+ igt_warn_on(plane == PLANE_CUR && tiling != TILING_LINEAR);
-static void teardown_modeset(void)
-{
- enum pixel_format f;
+ igt_calc_fb_size(drm.fd, width, height, format, modifier, &size,
+ &stride);
- for (f = 0; f < FORMAT_COUNT; f++)
- destroy_fbs(f);
+ igt_create_fb_with_bo_size(drm.fd, width, height, format, modifier,
+ IGT_COLOR_YCBCR_BT709,
+ IGT_COLOR_YCBCR_LIMITED_RANGE,
+ fb, size, stride);
}
-static void setup_crcs(void)
+static uint32_t pick_color(struct igt_fb *fb, enum color ecolor)
{
- enum pixel_format f;
-
- for (f = 0; f < FORMAT_COUNT; f++)
- blue_crcs[f].initialized = false;
+ uint32_t color, r, g, b, b2, a;
+ bool alpha = false;
- pattern1.frames_stack = true;
- pattern1.n_rects = 4;
- pattern1.get_rect = pat1_get_rect;
- for (f = 0; f < FORMAT_COUNT; f++) {
- pattern1.initialized[f] = false;
- pattern1.crcs[f] = NULL;
+ switch (fb->drm_format) {
+ case DRM_FORMAT_RGB565:
+ a = 0x0;
+ r = 0x1F << 11;
+ g = 0x3F << 5;
+ b = 0x1F;
+ b2 = 0x10;
+ break;
+ case DRM_FORMAT_ARGB8888:
+ alpha = true;
+ case DRM_FORMAT_XRGB8888:
+ a = 0xFF << 24;
+ r = 0xFF << 16;
+ g = 0xFF << 8;
+ b = 0xFF;
+ b2 = 0x80;
+ break;
+ case DRM_FORMAT_ARGB2101010:
+ alpha = true;
+ case DRM_FORMAT_XRGB2101010:
+ a = 0x3 << 30;
+ r = 0x3FF << 20;
+ g = 0x3FF << 10;
+ b = 0x3FF;
+ b2 = 0x200;
+ break;
+ default:
+ igt_assert(false);
}
- pattern2.frames_stack = true;
- pattern2.n_rects = 4;
- pattern2.get_rect = pat2_get_rect;
- for (f = 0; f < FORMAT_COUNT; f++) {
- pattern2.initialized[f] = false;
- pattern2.crcs[f] = NULL;
+ switch (ecolor) {
+ case COLOR_RED:
+ color = r;
+ break;
+ case COLOR_GREEN:
+ color = g;
+ break;
+ case COLOR_BLUE:
+ color = b;
+ break;
+ case COLOR_MAGENTA:
+ color = r | b;
+ break;
+ case COLOR_CYAN:
+ color = g | b;
+ break;
+ case COLOR_SCND_BG:
+ color = b2;
+ break;
+ default:
+ igt_assert(false);
}
- pattern3.frames_stack = false;
- pattern3.n_rects = 5;
- pattern3.get_rect = pat3_get_rect;
- for (f = 0; f < FORMAT_COUNT; f++) {
- pattern3.initialized[f] = false;
- pattern3.crcs[f] = NULL;
- }
+ if (alpha)
+ color |= a;
- pattern4.frames_stack = false;
- pattern4.n_rects = 1;
- pattern4.get_rect = pat4_get_rect;
- for (f = 0; f < FORMAT_COUNT; f++) {
- pattern4.initialized[f] = false;
- pattern4.crcs[f] = NULL;
- }
+ return color;
}
-static void teardown_crcs(void)
+static void fill_fb(struct igt_fb *fb, enum color ecolor)
{
- enum pixel_format f;
-
- for (f = 0; f < FORMAT_COUNT; f++) {
- if (pattern1.crcs[f])
- free(pattern1.crcs[f]);
- if (pattern2.crcs[f])
- free(pattern2.crcs[f]);
- if (pattern3.crcs[f])
- free(pattern3.crcs[f]);
- if (pattern4.crcs[f])
- free(pattern4.crcs[f]);
- }
-
- igt_pipe_crc_free(pipe_crc);
+ igt_draw_fill_fb(drm.fd, fb, pick_color(fb, ecolor));
}
-static void setup_fbc(void)
+/*
+ * This is how the prim, scnd and offscreen FBs should be positioned inside the
+ * shared FB. The prim buffer starts at the X and Y offsets defined by
+ * opt.shared_fb_{x,y}_offset, then scnd starts at the same X pixel offset,
+ * right after prim ends on the Y axis, then the offscreen fb starts after scnd
+ * ends. Just like the picture:
+ *
+ * +-------------------------+
+ * | shared fb |
+ * | +------------------+ |
+ * | | prim | |
+ * | | | |
+ * | | | |
+ * | | | |
+ * | +------------------+--+
+ * | | scnd |
+ * | | |
+ * | | |
+ * | +---------------+-----+
+ * | | offscreen | |
+ * | | | |
+ * | | | |
+ * +---+---------------+-----+
+ *
+ * We do it vertically instead of the more common horizontal case in order to
+ * avoid super huge strides not supported by FBC.
+ */
+static void create_shared_fb(enum pixel_format format, enum tiling_type tiling)
{
- if (!intel_fbc_supported_on_chipset(drm.fd, prim_mode_params.pipe)) {
- igt_info("Can't test FBC: not supported on this chipset\n");
- return;
+ int prim_w, prim_h, scnd_w, scnd_h, offs_w, offs_h, big_w, big_h;
+ struct screen_fbs *s = &fbs[format];
+
+ prim_w = prim_mode_params.mode.hdisplay;
+ prim_h = prim_mode_params.mode.vdisplay;
+
+ if (scnd_mode_params.output) {
+ scnd_w = scnd_mode_params.mode.hdisplay;
+ scnd_h = scnd_mode_params.mode.vdisplay;
+ } else {
+ scnd_w = 0;
+ scnd_h = 0;
}
+ offs_w = offscreen_fb.w;
+ offs_h = offscreen_fb.h;
- fbc.can_test = true;
+ big_w = prim_w;
+ if (scnd_w > big_w)
+ big_w = scnd_w;
+ if (offs_w > big_w)
+ big_w = offs_w;
+ big_w += opt.shared_fb_x_offset;
- fbc_setup_last_action();
-}
+ big_h = prim_h + scnd_h + offs_h + opt.shared_fb_y_offset;
-static void teardown_fbc(void)
-{
+ create_fb(format, big_w, big_h, tiling, PLANE_PRI, &s->big);
}
-static void setup_psr(void)
+static void destroy_fbs(enum pixel_format format)
{
- if (prim_mode_params.output->config.connector->connector_type !=
- DRM_MODE_CONNECTOR_eDP) {
- igt_info("Can't test PSR: no usable eDP screen.\n");
- return;
- }
+ struct screen_fbs *s = &fbs[format];
- if (!psr_sink_support(drm.fd, drm.debugfs, PSR_MODE_1)) {
- igt_info("Can't test PSR: not supported by sink.\n");
+ if (!s->initialized)
return;
+
+ if (scnd_mode_params.output) {
+ igt_remove_fb(drm.fd, &s->scnd_pri);
+ igt_remove_fb(drm.fd, &s->scnd_cur);
+ igt_remove_fb(drm.fd, &s->scnd_spr);
}
- psr.can_test = true;
+ igt_remove_fb(drm.fd, &s->prim_pri);
+ igt_remove_fb(drm.fd, &s->prim_cur);
+ igt_remove_fb(drm.fd, &s->prim_spr);
+ igt_remove_fb(drm.fd, &s->offscreen);
+ igt_remove_fb(drm.fd, &s->big);
}
-static void teardown_psr(void)
+static void create_fbs(enum pixel_format format, enum tiling_type tiling)
{
-}
+ struct screen_fbs *s = &fbs[format];
-static void setup_drrs(void)
-{
- if (!intel_output_has_drrs(drm.fd, prim_mode_params.output)) {
- igt_info("Can't test DRRS: no usable screen.\n");
- return;
- }
+ if (s->initialized)
+ destroy_fbs(format);
- if (!intel_is_drrs_supported(drm.fd, prim_mode_params.pipe)) {
- igt_info("Can't test DRRS: Not supported.\n");
- return;
- }
+ s->initialized = true;
- drrs.can_test = true;
-}
+ create_fb(format, prim_mode_params.mode.hdisplay,
+ prim_mode_params.mode.vdisplay, tiling, PLANE_PRI,
+ &s->prim_pri);
+ create_fb(format, prim_mode_params.cursor.w,
+ prim_mode_params.cursor.h, DRM_FORMAT_MOD_LINEAR,
+ PLANE_CUR, &s->prim_cur);
+ create_fb(format, prim_mode_params.sprite.w,
+ prim_mode_params.sprite.h, tiling, PLANE_SPR, &s->prim_spr);
-static void setup_environment(void)
-{
- setup_drm();
- setup_modeset();
+ create_fb(format, offscreen_fb.w, offscreen_fb.h, tiling, PLANE_PRI,
+ &s->offscreen);
- setup_fbc();
- setup_psr();
- setup_drrs();
+ create_shared_fb(format, tiling);
- setup_crcs();
+ if (!scnd_mode_params.output)
+ return;
+
+ create_fb(format, scnd_mode_params.mode.hdisplay,
+ scnd_mode_params.mode.vdisplay, tiling, PLANE_PRI,
+ &s->scnd_pri);
+ create_fb(format, scnd_mode_params.cursor.w, scnd_mode_params.cursor.h,
+ DRM_FORMAT_MOD_LINEAR, PLANE_CUR, &s->scnd_cur);
+ create_fb(format, scnd_mode_params.sprite.w, scnd_mode_params.sprite.h,
+ tiling, PLANE_SPR, &s->scnd_spr);
}
-static void teardown_environment(void)
+static void __set_prim_plane_for_params(struct modeset_params *params)
{
- stop_busy_thread();
-
- teardown_crcs();
- teardown_psr();
- teardown_fbc();
- teardown_modeset();
- teardown_drm();
+ igt_plane_set_fb(params->primary.plane, params->primary.fb);
+ igt_plane_set_position(params->primary.plane, 0, 0);
+ igt_plane_set_size(params->primary.plane, params->mode.hdisplay, params->mode.vdisplay);
+ igt_fb_set_position(params->primary.fb, params->primary.plane,
+ params->primary.x, params->primary.y);
+ igt_fb_set_size(params->primary.fb, params->primary.plane,
+ params->mode.hdisplay, params->mode.vdisplay);
}
-static void wait_user(int step, const char *msg)
+static void __set_mode_for_params(struct modeset_params *params)
{
- if (opt.step < step)
- return;
+ igt_output_override_mode(params->output, ¶ms->mode);
+ igt_output_set_pipe(params->output, params->pipe);
- igt_info("%s Press enter...\n", msg);
- while (getchar() != '\n')
- ;
+ __set_prim_plane_for_params(params);
}
-static struct modeset_params *pick_params(const struct test_mode *t)
+static void set_mode_for_params(struct modeset_params *params)
{
- switch (t->screen) {
- case SCREEN_PRIM:
- return &prim_mode_params;
- case SCREEN_SCND:
- return &scnd_mode_params;
- case SCREEN_OFFSCREEN:
- return NULL;
- default:
- igt_assert(false);
- }
+ __set_mode_for_params(params);
+ igt_display_commit(&drm.display);
}
-static struct fb_region *pick_target(const struct test_mode *t,
- struct modeset_params *params)
+static void __debugfs_read_crtc(const char *param, char *buf, int len)
{
- if (!params)
- return &offscreen_fb;
+ int dir;
+ enum pipe pipe;
- switch (t->plane) {
- case PLANE_PRI:
- return ¶ms->primary;
- case PLANE_CUR:
- return ¶ms->cursor;
- case PLANE_SPR:
- return ¶ms->sprite;
- default:
- igt_assert(false);
- }
+ pipe = prim_mode_params.pipe;
+ dir = igt_debugfs_pipe_dir(drm.fd, pipe, O_DIRECTORY);
+ igt_require_fd(dir);
+ igt_debugfs_simple_read(dir, param, buf, len);
+ close(dir);
}
-static void do_flush(const struct test_mode *t)
+#define debugfs_read_crtc(p, arr) __debugfs_read_crtc(p, arr, sizeof(arr))
+#define debugfs_write_crtc(p, arr) __debugfs_write_crtc(p, arr, sizeof(arr))
+#define debugfs_read_connector(p, arr) __debugfs_read_connector(p, arr, sizeof(arr))
+
+static bool is_drrs_high(void)
{
- struct modeset_params *params = pick_params(t);
- struct fb_region *target = pick_target(t, params);
+ char buf[MAX_DRRS_STATUS_BUF_LEN];
- if (is_i915_device(drm.fd))
- gem_set_domain(drm.fd, target->fb->gem_handle, I915_GEM_DOMAIN_GTT, 0);
+ debugfs_read_crtc("i915_drrs_status", buf);
+ return strstr(buf, "DRRS refresh rate: high");
}
-#define DONT_ASSERT_CRC (1 << 0)
-#define DONT_ASSERT_FEATURE_STATUS (1 << 1)
-#define DONT_ASSERT_FBC_STATUS (1 << 12)
-
-#define FBC_ASSERT_FLAGS (0xF << 2)
-#define ASSERT_FBC_ENABLED (1 << 2)
-#define ASSERT_FBC_DISABLED (1 << 3)
-#define ASSERT_LAST_ACTION_CHANGED (1 << 4)
-#define ASSERT_NO_ACTION_CHANGE (1 << 5)
-
-#define PSR_ASSERT_FLAGS (3 << 6)
-#define ASSERT_PSR_ENABLED (1 << 6)
-#define ASSERT_PSR_DISABLED (1 << 7)
-
-#define DRRS_ASSERT_FLAGS (7 << 8)
-#define ASSERT_DRRS_HIGH (1 << 8)
-#define ASSERT_DRRS_LOW (1 << 9)
-#define ASSERT_DRRS_INACTIVE (1 << 10)
+static bool is_drrs_low(void)
+{
+ char buf[MAX_DRRS_STATUS_BUF_LEN];
-#define ASSERT_NO_IDLE_GPU (1 << 11)
+ debugfs_read_crtc("i915_drrs_status", buf);
+ return strstr(buf, "DRRS refresh rate: low");
+}
-static int adjust_assertion_flags(const struct test_mode *t, int flags)
+static void drrs_print_status(void)
{
- if (!(flags & DONT_ASSERT_FEATURE_STATUS)) {
- if (!(flags & ASSERT_FBC_DISABLED))
- flags |= ASSERT_FBC_ENABLED;
- if (!(flags & ASSERT_PSR_DISABLED))
- flags |= ASSERT_PSR_ENABLED;
- if (!((flags & ASSERT_DRRS_LOW) ||
- (flags & ASSERT_DRRS_INACTIVE)))
- flags |= ASSERT_DRRS_HIGH;
- }
-
- if ((t->feature & FEATURE_FBC) == 0 || (flags & DONT_ASSERT_FBC_STATUS))
- flags &= ~FBC_ASSERT_FLAGS;
- if ((t->feature & FEATURE_PSR) == 0)
- flags &= ~PSR_ASSERT_FLAGS;
- if ((t->feature & FEATURE_DRRS) == 0)
- flags &= ~DRRS_ASSERT_FLAGS;
+ char buf[MAX_DRRS_STATUS_BUF_LEN];
- return flags;
+ debugfs_read_crtc("i915_drrs_status", buf);
+ igt_info("DRRS STATUS :\n%s\n", buf);
}
-static void do_crc_assertions(int flags)
+static struct timespec fbc_get_last_action(void)
{
- igt_crc_t crc;
+ struct timespec ret = { 0, 0 };
+ char buf[128];
+ char *action;
+ ssize_t n_read;
- if (!opt.check_crc || (flags & DONT_ASSERT_CRC))
- return;
- collect_crc(&crc);
- print_crc("Calculated CRC:", &crc);
+ debugfs_read_crtc("i915_fbc_status", buf);
+ action = strstr(buf, "\nLast action:");
+ igt_assert(action);
- igt_assert(wanted_crc);
- igt_assert_crc_equal(&crc, wanted_crc);
+ n_read = sscanf(action, "Last action: %ld.%ld",
+ &ret.tv_sec, &ret.tv_nsec);
+ igt_assert(n_read == 2);
+
+ return ret;
}
-static void do_status_assertions(int flags)
+static bool fbc_last_action_changed(void)
{
- if (!opt.check_status) {
- /* Make sure we settle before continuing. */
- sleep(1);
- return;
- }
+ struct timespec t_new, t_old;
- if (flags & ASSERT_DRRS_HIGH) {
- if (!is_drrs_high()) {
- drrs_print_status();
- igt_assert_f(false, "DRRS HIGH\n");
- }
- } else if (flags & ASSERT_DRRS_LOW) {
- if (!drrs_wait_until_rr_switch_to_low()) {
- drrs_print_status();
- igt_assert_f(false, "DRRS LOW\n");
- }
- } else if (flags & ASSERT_DRRS_INACTIVE) {
- if (!intel_is_drrs_inactive(drm.fd, prim_mode_params.pipe)) {
- drrs_print_status();
- igt_assert_f(false, "DRRS INACTIVE\n");
- }
- }
+ t_old = fbc.last_action;
+ t_new = fbc_get_last_action();
- if (flags & ASSERT_FBC_ENABLED) {
- igt_require(!fbc_not_enough_stolen());
- igt_require(!fbc_stride_not_supported());
- igt_require(!fbc_mode_too_large());
- if (!intel_fbc_wait_until_enabled(drm.fd, prim_mode_params.pipe)) {
- igt_assert_f(intel_fbc_is_enabled(drm.fd,
- prim_mode_params.pipe,
- IGT_LOG_WARN),
- "FBC disabled\n");
- }
+ fbc.last_action = t_new;
- if (opt.fbc_check_compression)
- igt_assert(fbc_wait_for_compression());
- } else if (flags & ASSERT_FBC_DISABLED) {
- igt_assert(!intel_fbc_wait_until_enabled(drm.fd,
- prim_mode_params.pipe));
- }
+#if 0
+ igt_info("old: %ld.%ld\n", t_old.tv_sec, t_old.tv_nsec);
+ igt_info("new: %ld.%ld\n", t_new.tv_sec, t_new.tv_nsec);
+#endif
- if (flags & ASSERT_PSR_ENABLED)
- igt_assert_f(psr_wait_entry(drm.debugfs, PSR_MODE_1),
- "PSR still disabled\n");
- else if (flags & ASSERT_PSR_DISABLED)
- igt_assert_f(psr_wait_update(drm.debugfs, PSR_MODE_1),
- "PSR still enabled\n");
+ return t_old.tv_sec != t_new.tv_sec ||
+ t_old.tv_nsec != t_new.tv_nsec;
}
-static void __do_assertions(const struct test_mode *t, int flags,
- int line)
+static void fbc_update_last_action(void)
{
- flags = adjust_assertion_flags(t, flags);
-
- /* Make sure any submitted rendering is now idle. */
- if (!(flags & ASSERT_NO_IDLE_GPU))
- gem_quiescent_gpu(drm.fd);
-
- igt_debug("checking asserts in line %i\n", line);
-
- wait_user(2, "Paused before assertions.");
+ if (!fbc.supports_last_action)
+ return;
- /* Check the CRC to make sure the drawing operations work
- * immediately, independently of the features being enabled. */
- do_crc_assertions(flags);
+ fbc.last_action = fbc_get_last_action();
- /* Now we can flush things to make the test faster. */
- do_flush(t);
+#if 0
+ igt_info("Last action: %ld.%ld\n",
+ fbc.last_action.tv_sec, fbc.last_action.tv_nsec);
+#endif
+}
- do_status_assertions(flags);
+static void fbc_setup_last_action(void)
+{
+ ssize_t n_read;
+ char buf[128];
+ char *action;
- /* Check CRC again to make sure the compressed screen is ok,
- * except if we're not drawing on the primary screen. On this
- * case, the first check should be enough and a new CRC check
- * would only delay the test suite while adding no value to the
- * test suite. */
- if (t->screen == SCREEN_PRIM)
- do_crc_assertions(flags);
- if (fbc.supports_last_action && opt.fbc_check_last_action) {
- if (flags & ASSERT_LAST_ACTION_CHANGED)
- igt_assert(fbc_last_action_changed());
- else if (flags & ASSERT_NO_ACTION_CHANGE)
- igt_assert(!fbc_last_action_changed());
+ debugfs_read_crtc("i915_fbc_status", buf);
+ action = strstr(buf, "\nLast action:");
+ if (!action) {
+ igt_info("FBC last action not supported\n");
+ return;
}
- wait_user(1, "Paused after assertions.");
-}
+ fbc.supports_last_action = true;
-#define do_assertions(__flags) __do_assertions(t, (__flags), __LINE__)
+ n_read = sscanf(action, "Last action: %ld.%ld",
+ &fbc.last_action.tv_sec, &fbc.last_action.tv_nsec);
+ igt_assert(n_read == 2);
+}
-static void enable_prim_screen_and_wait(const struct test_mode *t)
+static bool fbc_is_compressing(void)
{
- fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
- set_mode_for_params(&prim_mode_params);
-
- wanted_crc = &blue_crcs[t->format].crc;
- fbc_update_last_action();
+ char buf[128];
- do_assertions(ASSERT_NO_ACTION_CHANGE);
+ debugfs_read_crtc("i915_fbc_status", buf);
+ return strstr(buf, "\nCompressing: yes\n") != NULL;
}
-static void update_modeset_cached_params(void)
+static bool fbc_wait_for_compression(void)
{
- bool found = false;
+ return igt_wait(fbc_is_compressing(), 2000, 1);
+}
- igt_output_set_pipe(prim_mode_params.output, prim_mode_params.pipe);
- igt_output_set_pipe(scnd_mode_params.output, scnd_mode_params.pipe);
+static bool fbc_not_enough_stolen(void)
+{
+ char buf[128];
- found = igt_override_all_active_output_modes_to_fit_bw(&drm.display);
- igt_require_f(found, "No valid mode combo found.\n");
+ debugfs_read_crtc("i915_fbc_status", buf);
+ return strstr(buf, "FBC disabled: not enough stolen memory\n");
+}
- prim_mode_params.mode = *igt_output_get_mode(prim_mode_params.output);
- prim_mode_params.primary.w = prim_mode_params.mode.hdisplay;
- prim_mode_params.primary.h = prim_mode_params.mode.vdisplay;
+static bool fbc_stride_not_supported(void)
+{
+ char buf[128];
- scnd_mode_params.mode = *igt_output_get_mode(scnd_mode_params.output);
- scnd_mode_params.primary.w = scnd_mode_params.mode.hdisplay;
- scnd_mode_params.primary.h = scnd_mode_params.mode.vdisplay;
+ debugfs_read_crtc("i915_fbc_status", buf);
+ return strstr(buf, "FBC disabled: framebuffer stride not supported\n");
+}
- fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
- fill_fb_region(&scnd_mode_params.primary, COLOR_SCND_BG);
+static bool fbc_mode_too_large(void)
+{
+ char buf[128];
- __set_mode_for_params(&prim_mode_params);
- __set_mode_for_params(&scnd_mode_params);
+ debugfs_read_crtc("i915_fbc_status", buf);
+ return strstr(buf, "FBC disabled: mode too large for compression\n");
}
-static void enable_both_screens_and_wait(const struct test_mode *t)
+static bool drrs_wait_until_rr_switch_to_low(void)
{
- int ret;
+ return igt_wait(is_drrs_low(), 5000, 1);
+}
- fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
- fill_fb_region(&scnd_mode_params.primary, COLOR_SCND_BG);
+static struct rect pat1_get_rect(struct fb_region *fb, int r)
+{
+ struct rect rect;
- __set_mode_for_params(&prim_mode_params);
- __set_mode_for_params(&scnd_mode_params);
+ switch (r) {
+ case 0:
+ rect.x = 0;
+ rect.y = 0;
+ rect.w = fb->w / 8;
+ rect.h = fb->h / 8;
+ rect.color = pick_color(fb->fb, COLOR_GREEN);
+ break;
+ case 1:
+ rect.x = fb->w / 8 * 4;
+ rect.y = fb->h / 8 * 4;
+ rect.w = fb->w / 8 * 2;
+ rect.h = fb->h / 8 * 2;
+ rect.color = pick_color(fb->fb, COLOR_RED);
+ break;
+ case 2:
+ rect.x = fb->w / 16 + 1;
+ rect.y = fb->h / 16 + 1;
+ rect.w = fb->w / 8 + 1;
+ rect.h = fb->h / 8 + 1;
+ rect.color = pick_color(fb->fb, COLOR_MAGENTA);
+ break;
+ case 3:
+ rect.x = fb->w - 1;
+ rect.y = fb->h - 1;
+ rect.w = 1;
+ rect.h = 1;
+ rect.color = pick_color(fb->fb, COLOR_CYAN);
+ break;
+ default:
+ igt_assert(false);
+ }
- if (drm.display.is_atomic)
- ret = igt_display_try_commit_atomic(&drm.display,
- DRM_MODE_ATOMIC_TEST_ONLY |
- DRM_MODE_ATOMIC_ALLOW_MODESET,
- NULL);
- else
- ret = igt_display_try_commit2(&drm.display, COMMIT_LEGACY);
+ return rect;
+}
- if (ret)
- update_modeset_cached_params();
+static struct rect pat2_get_rect(struct fb_region *fb, int r)
+{
+ struct rect rect;
- igt_display_commit2(&drm.display, drm.display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+ rect.x = 0;
+ rect.y = 0;
+ rect.w = 64;
+ rect.h = 64;
- wanted_crc = &blue_crcs[t->format].crc;
- fbc_update_last_action();
+ switch (r) {
+ case 0:
+ rect.color = pick_color(fb->fb, COLOR_GREEN);
+ break;
+ case 1:
+ rect.x = 31;
+ rect.y = 31;
+ rect.w = 31;
+ rect.h = 31;
+ rect.color = pick_color(fb->fb, COLOR_RED);
+ break;
+ case 2:
+ rect.x = 16;
+ rect.y = 16;
+ rect.w = 32;
+ rect.h = 32;
+ rect.color = pick_color(fb->fb, COLOR_MAGENTA);
+ break;
+ case 3:
+ rect.color = pick_color(fb->fb, COLOR_CYAN);
+ break;
+ default:
+ igt_assert(false);
+ }
- do_assertions(ASSERT_NO_ACTION_CHANGE);
+ return rect;
}
-static void set_region_for_test(const struct test_mode *t,
- struct fb_region *reg)
+static struct rect pat3_get_rect(struct fb_region *fb, int r)
{
- fill_fb_region(reg, COLOR_PRIM_BG);
+ struct rect rect;
- igt_plane_set_fb(reg->plane, reg->fb);
- igt_plane_set_position(reg->plane, 0, 0);
- igt_plane_set_size(reg->plane, reg->w, reg->h);
- igt_fb_set_size(reg->fb, reg->plane, reg->w, reg->h);
+ rect.w = 64;
+ rect.h = 64;
+ rect.color = pick_color(fb->fb, COLOR_GREEN);
- igt_display_commit(&drm.display);
- do_assertions(ASSERT_NO_ACTION_CHANGE);
+ switch (r) {
+ case 0:
+ rect.x = 0;
+ rect.y = 0;
+ break;
+ case 1:
+ rect.x = 64;
+ rect.y = 64;
+ break;
+ case 2:
+ rect.x = 1;
+ rect.y = 1;
+ break;
+ case 3:
+ rect.x = fb->w - 64;
+ rect.y = fb->h - 64;
+ break;
+ case 4:
+ rect.x = fb->w / 2 - 32;
+ rect.y = fb->h / 2 - 32;
+ break;
+ default:
+ igt_assert(false);
+ }
+
+ return rect;
}
-static bool enable_features_for_test(const struct test_mode *t)
+static struct rect pat4_get_rect(struct fb_region *fb, int r)
{
- bool ret = false;
+ struct rect rect;
- if (t->feature == FEATURE_DEFAULT)
- return false;
+ igt_assert_eq(r, 0);
- if (t->feature & FEATURE_FBC)
- intel_fbc_enable(drm.fd);
- if (t->feature & FEATURE_PSR)
- ret = psr_enable(drm.fd, drm.debugfs, PSR_MODE_1);
- if (t->feature & FEATURE_DRRS)
- intel_drrs_enable(drm.fd, prim_mode_params.pipe);
+ rect.x = 0;
+ rect.y = 0;
+ rect.w = fb->w;
+ rect.h = fb->h;
+ rect.color = pick_color(fb->fb, COLOR_GREEN);
- return ret;
+ return rect;
}
-static void check_test_requirements(const struct test_mode *t)
+static void fb_dirty_ioctl(struct fb_region *fb, struct rect *rect)
{
- int ver;
+ int rc;
+ drmModeClip clip = {
+ .x1 = rect->x,
+ .x2 = rect->x + rect->w,
+ .y1 = rect->y,
+ .y2 = rect->y + rect->h,
+ };
- if (t->pipes == PIPE_DUAL)
- igt_require_f(scnd_mode_params.output,
- "Can't test dual pipes with the current outputs\n");
+ rc = drmModeDirtyFB(drm.fd, fb->fb->fb_id, &clip, 1);
- if (t->feature & FEATURE_FBC)
- igt_require_f(fbc.can_test,
- "Can't test FBC with this chipset\n");
+ igt_assert(rc == 0 || rc == -ENOSYS);
+}
- if (t->feature & FEATURE_PSR) {
- igt_require_f(psr.can_test,
- "Can't test PSR with the current outputs\n");
- }
+static void draw_rect(struct draw_pattern_info *pattern, struct fb_region *fb,
+ enum igt_draw_method method, int r)
+{
+ struct rect rect = pattern->get_rect(fb, r);
- if (t->feature & FEATURE_DRRS)
- igt_require_f(drrs.can_test,
- "Can't test DRRS with the current outputs\n");
+ igt_draw_rect_fb(drm.fd, drm.bops, 0, fb->fb, method,
+ fb->x + rect.x, fb->y + rect.y,
+ rect.w, rect.h, rect.color);
- /*
- * In kernel, When PSR is enabled, DRRS will be disabled. So If a test
- * case needs DRRS + PSR enabled, that will be skipped.
- */
- igt_require_f(!((t->feature & FEATURE_PSR) &&
- (t->feature & FEATURE_DRRS)),
- "Can't test PSR and DRRS together\n");
+ fb_dirty_ioctl(fb, &rect);
+}
+
+static void draw_rect_igt_fb(struct draw_pattern_info *pattern,
+ struct igt_fb *fb, enum igt_draw_method method,
+ int r)
+{
+ struct fb_region region = {
+ .fb = fb,
+ .x = 0,
+ .y = 0,
+ .w = fb->width,
+ .h = fb->height,
+ };
- if (opt.only_pipes != PIPE_COUNT)
- igt_require(t->pipes == opt.only_pipes);
+ draw_rect(pattern, ®ion, method, r);
+}
- /* Kernel disables fbc for display versions 12 and 13 if psr is enabled. */
- ver = intel_display_ver(intel_get_drm_devid(drm.fd));
- if (ver >= 12 && ver <= 13)
- igt_require_f(!((t->feature & FEATURE_PSR) &&
- (t->feature & FEATURE_FBC)),
- "Can't test PSR and FBC together\n");
+static void fill_fb_region(struct fb_region *region, enum color ecolor)
+{
+ uint32_t color = pick_color(region->fb, ecolor);
+ igt_draw_rect_fb(drm.fd, drm.bops, 0, region->fb, IGT_DRAW_BLT,
+ region->x, region->y, region->w, region->h,
+ color);
}
-static void set_crtc_fbs(const struct test_mode *t)
+static void _fb_dirty_ioctl(struct fb_region *region)
{
- struct screen_fbs *s = &fbs[t->format];
+ struct rect rect;
- create_fbs(t->format, t->tiling);
+ rect.x = region->x;
+ rect.y = region->y;
+ rect.w = region->w;
+ rect.h = region->h;
+ fb_dirty_ioctl(region, &rect);
+}
- switch (t->fbs) {
- case FBS_INDIVIDUAL:
- prim_mode_params.primary.fb = &s->prim_pri;
- scnd_mode_params.primary.fb = &s->scnd_pri;
- offscreen_fb.fb = &s->offscreen;
+static void unset_all_crtcs(void)
+{
+ igt_display_reset(&drm.display);
+ igt_display_commit(&drm.display);
+}
- prim_mode_params.primary.x = 0;
- scnd_mode_params.primary.x = 0;
- offscreen_fb.x = 0;
+static bool disable_features(const struct test_mode *t)
+{
+ if (t->feature == FEATURE_DEFAULT)
+ return false;
- prim_mode_params.primary.y = 0;
- scnd_mode_params.primary.y = 0;
- offscreen_fb.y = 0;
- break;
- case FBS_SHARED:
- /* Please see the comment at the top of create_shared_fb(). */
- prim_mode_params.primary.fb = &s->big;
- scnd_mode_params.primary.fb = &s->big;
- offscreen_fb.fb = &s->big;
+ intel_fbc_disable(drm.fd);
+ intel_drrs_disable(drm.fd, prim_mode_params.pipe);
- prim_mode_params.primary.x = opt.shared_fb_x_offset;
- scnd_mode_params.primary.x = opt.shared_fb_x_offset;
- offscreen_fb.x = opt.shared_fb_x_offset;
+ return psr.can_test ? psr_disable(drm.fd, drm.debugfs) : false;
+}
- prim_mode_params.primary.y = opt.shared_fb_y_offset;
- scnd_mode_params.primary.y = prim_mode_params.primary.y +
- prim_mode_params.primary.h;
- offscreen_fb.y = scnd_mode_params.primary.y + scnd_mode_params.primary.h;
- break;
- default:
- igt_assert(false);
- }
+static void *busy_thread_func(void *data)
+{
+ while (!busy_thread.stop)
+ igt_draw_rect(drm.fd, drm.bops, 0, busy_thread.handle,
+ busy_thread.size, busy_thread.stride,
+ busy_thread.tiling, IGT_DRAW_BLT, 0, 0,
+ busy_thread.width, busy_thread.height,
+ busy_thread.color, busy_thread.bpp);
- prim_mode_params.cursor.fb = &s->prim_cur;
- prim_mode_params.sprite.fb = &s->prim_spr;
- scnd_mode_params.cursor.fb = &s->scnd_cur;
- scnd_mode_params.sprite.fb = &s->scnd_spr;
+ pthread_exit(0);
}
-static void prepare_subtest_data(const struct test_mode *t,
- struct draw_pattern_info *pattern)
+static void start_busy_thread(struct igt_fb *fb)
{
- bool need_modeset;
+ int rc;
- check_test_requirements(t);
+ igt_assert(busy_thread.stop == true);
+ busy_thread.stop = false;
+ busy_thread.handle = fb->gem_handle;
+ busy_thread.size = fb->size;
+ busy_thread.stride = fb->strides[0];
+ busy_thread.width = fb->width;
+ busy_thread.height = fb->height;
+ busy_thread.color = pick_color(fb, COLOR_PRIM_BG);
+ busy_thread.bpp = igt_drm_format_to_bpp(fb->drm_format);
+ busy_thread.tiling = igt_fb_mod_to_tiling(fb->modifier);
- stop_busy_thread();
+ rc = pthread_create(&busy_thread.thread, NULL, busy_thread_func, NULL);
+ igt_assert_eq(rc, 0);
+}
- need_modeset = disable_features(t);
- set_crtc_fbs(t);
+static void stop_busy_thread(void)
+{
+ if (!busy_thread.stop) {
+ busy_thread.stop = true;
+ igt_assert(pthread_join(busy_thread.thread, NULL) == 0);
+ }
+}
- if (t->screen == SCREEN_OFFSCREEN)
- fill_fb_region(&offscreen_fb, COLOR_OFFSCREEN_BG);
+static void print_crc(const char *str, igt_crc_t *crc)
+{
+ char *pipe_str;
- igt_display_reset(&drm.display);
- if (need_modeset)
- igt_display_commit(&drm.display);
+ pipe_str = igt_crc_to_string(crc);
- init_blue_crc(t->format, t->tiling);
- if (pattern)
- init_crcs(t->format, t->tiling, pattern);
+ igt_debug("%s pipe:[%s]\n", str, pipe_str);
- need_modeset = enable_features_for_test(t);
- if (need_modeset)
- igt_display_commit(&drm.display);
+ free(pipe_str);
}
-static void prepare_subtest_screens(const struct test_mode *t)
+static void collect_crc(igt_crc_t *crc)
{
- if (t->pipes == PIPE_DUAL)
- enable_both_screens_and_wait(t);
- else
- enable_prim_screen_and_wait(t);
+ igt_pipe_crc_collect_crc(pipe_crc, crc);
+}
- if (t->screen == SCREEN_PRIM) {
- if (t->plane == PLANE_CUR)
- set_region_for_test(t, &prim_mode_params.cursor);
- if (t->plane == PLANE_SPR)
- set_region_for_test(t, &prim_mode_params.sprite);
- }
+static void init_blue_crc(enum pixel_format format, enum tiling_type tiling)
+{
+ struct igt_fb blue;
- if (t->pipes == PIPE_DUAL && t->screen == SCREEN_SCND) {
- if (t->plane == PLANE_CUR)
- set_region_for_test(t, &scnd_mode_params.cursor);
- if (t->plane == PLANE_SPR)
- set_region_for_test(t, &scnd_mode_params.sprite);
+ if (blue_crcs[format].initialized)
+ return;
+
+ create_fb(format, prim_mode_params.mode.hdisplay,
+ prim_mode_params.mode.vdisplay, tiling, PLANE_PRI,
+ &blue);
+
+ fill_fb(&blue, COLOR_PRIM_BG);
+
+ igt_output_set_pipe(prim_mode_params.output, prim_mode_params.pipe);
+ igt_output_override_mode(prim_mode_params.output, &prim_mode_params.mode);
+ igt_plane_set_fb(prim_mode_params.primary.plane, &blue);
+ igt_display_commit(&drm.display);
+
+ if (!pipe_crc) {
+ pipe_crc = igt_pipe_crc_new(drm.fd, prim_mode_params.pipe,
+ IGT_PIPE_CRC_SOURCE_AUTO);
+ igt_assert(pipe_crc);
}
-}
-static void prepare_subtest(const struct test_mode *t,
- struct draw_pattern_info *pattern)
-{
- prepare_subtest_data(t, pattern);
- prepare_subtest_screens(t);
-}
+ collect_crc(&blue_crcs[format].crc);
-/**
- * SUBTEST: drrs-%dp-rte
- * Description: Sanity test to enable DRRS with %arg[1] panels.
- * Driver requirement: i915, xe
- * Functionality: fbt, drrs
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-rte
- * Description: Sanity test to enable FBC with %arg[1] panels.
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-rte
- * Description: Sanity test to enable PSR with %arg[1] panels.
- * Driver requirement: i915, xe
- * Functionality: fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-rte
- * Description: Sanity test to enable FBC & DRRS with %arg[1] panels.
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-rte
- * Description: Sanity test to enable FBC & PSR with %arg[1] panels.
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-rte
- * Description: Sanity test to enable PSR & DRRS with %arg[1] panels.
- * Driver requirement: i915, xe
- * Functionality: fbt, drrs, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-rte
- * Description: Sanity test to enable FBC, PSR & DRRS with %arg[1] panels.
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, drrs, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- */
+ print_crc("Blue CRC: ", &blue_crcs[format].crc);
-/*
- * rte - the basic sanity test
- *
- * METHOD
- * Just disable all screens, assert everything is disabled, then enable all
- * screens - including primary, cursor and sprite planes - and assert that
- * the tested feature is enabled.
- *
- * EXPECTED RESULTS
- * Blue screens and t->feature enabled.
- *
- * FAILURES
- * A failure here means that every other subtest will probably fail too. It
- * probably means that the Kernel is just not enabling the feature we want.
- */
-static void rte_subtest(const struct test_mode *t)
+ igt_display_reset(&drm.display);
+
+ igt_remove_fb(drm.fd, &blue);
+
+ blue_crcs[format].initialized = true;
+}
+
+static void init_crcs(enum pixel_format format, enum tiling_type tiling,
+ struct draw_pattern_info *pattern)
{
- prepare_subtest_data(t, NULL);
+ int r, r_;
+ struct igt_fb tmp_fbs[pattern->n_rects];
- unset_all_crtcs();
- do_assertions(ASSERT_FBC_DISABLED | ASSERT_PSR_DISABLED |
- DONT_ASSERT_CRC | ASSERT_DRRS_INACTIVE);
+ if (pattern->initialized[format])
+ return;
- if (t->pipes == PIPE_SINGLE)
- enable_prim_screen_and_wait(t);
- else
- enable_both_screens_and_wait(t);
+ pattern->crcs[format] = calloc(pattern->n_rects,
+ sizeof(*(pattern->crcs[format])));
- set_region_for_test(t, &prim_mode_params.cursor);
- set_region_for_test(t, &prim_mode_params.sprite);
+ for (r = 0; r < pattern->n_rects; r++)
+ create_fb(format, prim_mode_params.mode.hdisplay,
+ prim_mode_params.mode.vdisplay, tiling,
+ PLANE_PRI, &tmp_fbs[r]);
- if (t->pipes == PIPE_DUAL) {
- set_region_for_test(t, &scnd_mode_params.cursor);
- set_region_for_test(t, &scnd_mode_params.sprite);
+ for (r = 0; r < pattern->n_rects; r++)
+ fill_fb(&tmp_fbs[r], COLOR_PRIM_BG);
+
+ if (pattern->frames_stack) {
+ for (r = 0; r < pattern->n_rects; r++)
+ for (r_ = 0; r_ <= r; r_++)
+ draw_rect_igt_fb(pattern, &tmp_fbs[r],
+ igt_draw_supports_method(drm.fd, IGT_DRAW_PWRITE) ?
+ IGT_DRAW_PWRITE : IGT_DRAW_RENDER,
+ r_);
+ } else {
+ for (r = 0; r < pattern->n_rects; r++)
+ draw_rect_igt_fb(pattern, &tmp_fbs[r], igt_draw_supports_method(drm.fd, IGT_DRAW_PWRITE) ?
+ IGT_DRAW_PWRITE : IGT_DRAW_RENDER, r);
+ }
+
+ igt_output_set_pipe(prim_mode_params.output, prim_mode_params.pipe);
+ igt_output_override_mode(prim_mode_params.output, &prim_mode_params.mode);
+ for (r = 0; r < pattern->n_rects; r++) {
+ igt_plane_set_fb(prim_mode_params.primary.plane, &tmp_fbs[r]);
+ igt_display_commit(&drm.display);
+
+ collect_crc(&pattern->crcs[format][r]);
+ }
+
+ for (r = 0; r < pattern->n_rects; r++) {
+ igt_debug("Rect %d CRC:", r);
+ print_crc("", &pattern->crcs[format][r]);
}
+
+ igt_display_reset(&drm.display);
+
+ for (r = 0; r < pattern->n_rects; r++)
+ igt_remove_fb(drm.fd, &tmp_fbs[r]);
+
+ pattern->initialized[format] = true;
}
-static void update_wanted_crc(const struct test_mode *t, igt_crc_t *crc)
+static void setup_drm(void)
{
- if (t->screen == SCREEN_PRIM)
- wanted_crc = crc;
+ drm.fd = drm_open_driver_master(DRIVER_INTEL | DRIVER_XE);
+ drm.debugfs = igt_debugfs_dir(drm.fd);
+
+ kmstest_set_vt_graphics_mode();
+ igt_display_require(&drm.display, drm.fd);
+
+ drm.bops = buf_ops_create(drm.fd);
}
-static bool op_disables_psr(const struct test_mode *t,
- enum igt_draw_method method)
+static void teardown_drm(void)
{
- if (method != IGT_DRAW_MMAP_GTT)
- return false;
- if (t->screen == SCREEN_PRIM)
- return true;
- /* On FBS_SHARED, even if the target is not the PSR screen
- * (SCREEN_PRIM), all primary planes share the same frontbuffer, so a
- * write to the second screen primary plane - or offscreen plane - will
- * touch the framebuffer that's also used by the primary screen. */
- if (t->fbs == FBS_SHARED && t->plane == PLANE_PRI)
- return true;
+ buf_ops_destroy(drm.bops);
+ igt_display_fini(&drm.display);
+ drm_close_driver(drm.fd);
+}
- return false;
+static void setup_modeset(void)
+{
+ igt_require(init_modeset_cached_params());
+ offscreen_fb.fb = NULL;
+ offscreen_fb.w = 1024;
+ offscreen_fb.h = 1024;
+ create_fbs(FORMAT_DEFAULT, opt.tiling);
}
-/**
- * SUBTEST: drrs-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @indfb: Individual fb
- * @shrfb: Shared fb
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @mmap-wc: MMAP-WC
- * @render: Render
- */
+static void teardown_modeset(void)
+{
+ enum pixel_format f;
-/**
- * SUBTEST: drrs-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-1p-offscren-pri-%s-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @indfb: Individual fb
- * @shrfb: Shared fb
- *
- * arg[2]:
- *
- * @mmap-cpu: MMAP-CPU
- * @mmap-gtt: MMAP-GTT
- * @pwrite: PWRITE
- */
+ for (f = 0; f < FORMAT_COUNT; f++)
+ destroy_fbs(f);
+}
+
+static void setup_crcs(void)
+{
+ enum pixel_format f;
+
+ for (f = 0; f < FORMAT_COUNT; f++)
+ blue_crcs[f].initialized = false;
+
+ pattern1.frames_stack = true;
+ pattern1.n_rects = 4;
+ pattern1.get_rect = pat1_get_rect;
+ for (f = 0; f < FORMAT_COUNT; f++) {
+ pattern1.initialized[f] = false;
+ pattern1.crcs[f] = NULL;
+ }
+
+ pattern2.frames_stack = true;
+ pattern2.n_rects = 4;
+ pattern2.get_rect = pat2_get_rect;
+ for (f = 0; f < FORMAT_COUNT; f++) {
+ pattern2.initialized[f] = false;
+ pattern2.crcs[f] = NULL;
+ }
+
+ pattern3.frames_stack = false;
+ pattern3.n_rects = 5;
+ pattern3.get_rect = pat3_get_rect;
+ for (f = 0; f < FORMAT_COUNT; f++) {
+ pattern3.initialized[f] = false;
+ pattern3.crcs[f] = NULL;
+ }
-/**
- * SUBTEST: drrs-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- *
- * arg[2]:
- *
- * @cur: Cursor plane
- * @pri: Primary plane
- * @spr: Sprite plane
- *
- * arg[3]:
- *
- * @mmap-cpu: MMAP-CPU
- * @mmap-gtt: MMAP-GTT
- * @pwrite: PWRITE
- */
+ pattern4.frames_stack = false;
+ pattern4.n_rects = 1;
+ pattern4.get_rect = pat4_get_rect;
+ for (f = 0; f < FORMAT_COUNT; f++) {
+ pattern4.initialized[f] = false;
+ pattern4.crcs[f] = NULL;
+ }
+}
-/**
- * SUBTEST: drrs-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- *
- * arg[2]:
- *
- * @cur: Cursor plane
- * @pri: Primary plane
- * @spr: Sprite plane
- *
- * arg[3]:
- *
- * @blt: Blitter
- * @mmap-wc: MMAP-WC
- * @render: Render
- */
+static void teardown_crcs(void)
+{
+ enum pixel_format f;
-/**
- * SUBTEST: drrs-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @mmap-wc: MMAP-WC
- * @render: Render
- */
+ for (f = 0; f < FORMAT_COUNT; f++) {
+ if (pattern1.crcs[f])
+ free(pattern1.crcs[f]);
+ if (pattern2.crcs[f])
+ free(pattern2.crcs[f]);
+ if (pattern3.crcs[f])
+ free(pattern3.crcs[f]);
+ if (pattern4.crcs[f])
+ free(pattern4.crcs[f]);
+ }
+
+ igt_pipe_crc_free(pipe_crc);
+}
+
+static void setup_fbc(void)
+{
+ if (!intel_fbc_supported_on_chipset(drm.fd, prim_mode_params.pipe)) {
+ igt_info("Can't test FBC: not supported on this chipset\n");
+ return;
+ }
+
+ fbc.can_test = true;
+
+ fbc_setup_last_action();
+}
+
+static void teardown_fbc(void)
+{
+}
+
+static void setup_psr(void)
+{
+ if (prim_mode_params.output->config.connector->connector_type !=
+ DRM_MODE_CONNECTOR_eDP) {
+ igt_info("Can't test PSR: no usable eDP screen.\n");
+ return;
+ }
+
+ if (!psr_sink_support(drm.fd, drm.debugfs, PSR_MODE_1)) {
+ igt_info("Can't test PSR: not supported by sink.\n");
+ return;
+ }
+ psr.can_test = true;
+}
+
+static void teardown_psr(void)
+{
+}
+
+static void setup_drrs(void)
+{
+ if (!intel_output_has_drrs(drm.fd, prim_mode_params.output)) {
+ igt_info("Can't test DRRS: no usable screen.\n");
+ return;
+ }
+
+ if (!intel_is_drrs_supported(drm.fd, prim_mode_params.pipe)) {
+ igt_info("Can't test DRRS: Not supported.\n");
+ return;
+ }
-/**
- * SUBTEST: drrs-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-primscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- *
- * arg[2]:
- *
- * @mmap-cpu: MMAP-CPU
- * @mmap-gtt: MMAP-GTT
- * @pwrite: PWRITE
- */
+ drrs.can_test = true;
+}
-/**
- * SUBTEST: drrs-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @cur: Cursor plane
- * @pri: Primary plane
- * @spr: Sprite plane
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @mmap-wc: MMAP-WC
- * @render: Render
- */
+static void setup_environment(void)
+{
+ setup_drm();
+ setup_modeset();
-/**
- * SUBTEST: drrs-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-indfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @cur: Cursor plane
- * @pri: Primary plane
- * @spr: Sprite plane
- *
- * arg[2]:
- *
- * @mmap-cpu: MMAP-CPU
- * @mmap-gtt: MMAP-GTT
- * @pwrite: PWRITE
- */
+ setup_fbc();
+ setup_psr();
+ setup_drrs();
-/**
- * SUBTEST: drrs-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @blt: Blitter
- * @mmap-wc: MMAP-WC
- * @render: Render
- */
+ setup_crcs();
+}
+
+static void teardown_environment(void)
+{
+ stop_busy_thread();
-/**
- * SUBTEST: drrs-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-2p-scndscrn-pri-shrfb-draw-%s
- * Description: Draw a set of rectangles on the screen using the provided method
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @mmap-cpu: MMAP-CPU
- * @mmap-gtt: MMAP-GTT
- * @pwrite: PWRITE
- */
+ teardown_crcs();
+ teardown_psr();
+ teardown_fbc();
+ teardown_modeset();
+ teardown_drm();
+}
-/*
- * draw - draw a set of rectangles on the screen using the provided method
- *
- * METHOD
- * Just set the screens as appropriate and then start drawing a series of
- * rectangles on the target screen. The important guy here is the drawing
- * method used.
- *
- * EXPECTED RESULTS
- * The feature either stays enabled or gets reenabled after the oprations. You
- * will also see the rectangles on the target screen.
- *
- * FAILURES
- * A failure here indicates a problem somewhere between the Kernel's
- * frontbuffer tracking infrastructure or the feature itself. You need to pay
- * attention to which drawing method is being used.
- */
-static void draw_subtest(const struct test_mode *t)
+static void wait_user(int step, const char *msg)
{
- int r;
- int assertions = 0;
- struct draw_pattern_info *pattern;
- struct modeset_params *params = pick_params(t);
- struct fb_region *target;
+ if (opt.step < step)
+ return;
+
+ igt_info("%s Press enter...\n", msg);
+ while (getchar() != '\n')
+ ;
+}
+static struct modeset_params *pick_params(const struct test_mode *t)
+{
switch (t->screen) {
case SCREEN_PRIM:
- if (t->method != IGT_DRAW_MMAP_GTT && t->plane == PLANE_PRI)
- assertions |= ASSERT_LAST_ACTION_CHANGED;
- else
- assertions |= ASSERT_NO_ACTION_CHANGE;
- break;
+ return &prim_mode_params;
case SCREEN_SCND:
+ return &scnd_mode_params;
case SCREEN_OFFSCREEN:
- assertions |= ASSERT_NO_ACTION_CHANGE;
- break;
+ return NULL;
default:
igt_assert(false);
}
+}
+
+static struct fb_region *pick_target(const struct test_mode *t,
+ struct modeset_params *params)
+{
+ if (!params)
+ return &offscreen_fb;
switch (t->plane) {
case PLANE_PRI:
- pattern = &pattern1;
- break;
+ return ¶ms->primary;
case PLANE_CUR:
+ return ¶ms->cursor;
case PLANE_SPR:
- pattern = &pattern2;
- break;
+ return ¶ms->sprite;
default:
igt_assert(false);
}
-
- if (op_disables_psr(t, t->method))
- assertions |= ASSERT_PSR_DISABLED;
-
- /*
- * On FBS_INDIVIDUAL, write to offscreen plane will not touch the
- * current frambuffer. Hence assert for DRRS_LOW.
- */
- if ((t->fbs == FBS_INDIVIDUAL) && (t->screen == SCREEN_OFFSCREEN))
- assertions |= ASSERT_DRRS_LOW;
-
- prepare_subtest(t, pattern);
- target = pick_target(t, params);
-
- for (r = 0; r < pattern->n_rects; r++) {
- igt_debug("Drawing rect %d\n", r);
- draw_rect(pattern, target, t->method, r);
- update_wanted_crc(t, &pattern->crcs[t->format][r]);
- do_assertions(assertions);
- }
}
-/**
- * SUBTEST: drrs-%dp-pri-indfb-multidraw
- * Description: Draw a set of rectangles on the screen using alternated drawing methods
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-pri-indfb-multidraw
- * Description: Draw a set of rectangles on the screen using alternated drawing methods
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-pri-indfb-multidraw
- * Description: Draw a set of rectangles on the screen using alternated drawing methods
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-pri-indfb-multidraw
- * Description: Draw a set of rectangles on the screen using alternated drawing methods
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-pri-indfb-multidraw
- * Description: Draw a set of rectangles on the screen using alternated drawing methods
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-pri-indfb-multidraw
- * Description: Draw a set of rectangles on the screen using alternated drawing methods
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-pri-indfb-multidraw
- * Description: Draw a set of rectangles on the screen using alternated drawing methods
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- */
-
-/*
- * multidraw - draw a set of rectangles on the screen using alternated drawing
- * methods
- *
- * METHOD
- * This is just like the draw subtest, but now we keep alternating between two
- * drawing methods. Each time we run multidraw_subtest we will test all the
- * possible pairs of drawing methods.
- *
- * EXPECTED RESULTS
- * The same as the draw subtest.
- *
- * FAILURES
- * If you get a failure here, first you need to check whether you also get
- * failures on the individual draw subtests. If yes, then go fix every single
- * draw subtest first. If all the draw subtests pass but this one fails, then
- * you have to study how one drawing method is stopping the other from
- * properly working.
- */
-static void multidraw_subtest(const struct test_mode *t)
+static void do_flush(const struct test_mode *t)
{
- int r;
- int assertions = 0;
- struct draw_pattern_info *pattern;
struct modeset_params *params = pick_params(t);
- struct fb_region *target;
- enum igt_draw_method m1, m2, used_method;
- bool wc_used = false;
+ struct fb_region *target = pick_target(t, params);
- switch (t->plane) {
- case PLANE_PRI:
- pattern = &pattern1;
- break;
- case PLANE_CUR:
- case PLANE_SPR:
- pattern = &pattern2;
- break;
- default:
- igt_assert(false);
- }
+ if (is_i915_device(drm.fd))
+ gem_set_domain(drm.fd, target->fb->gem_handle, I915_GEM_DOMAIN_GTT, 0);
+}
- prepare_subtest(t, pattern);
- target = pick_target(t, params);
+#define DONT_ASSERT_CRC (1 << 0)
+#define DONT_ASSERT_FEATURE_STATUS (1 << 1)
+#define DONT_ASSERT_FBC_STATUS (1 << 12)
- for (m1 = 0; m1 < IGT_DRAW_METHOD_COUNT; m1++) {
- for (m2 = m1 + 1; m2 < IGT_DRAW_METHOD_COUNT; m2++) {
+#define FBC_ASSERT_FLAGS (0xF << 2)
+#define ASSERT_FBC_ENABLED (1 << 2)
+#define ASSERT_FBC_DISABLED (1 << 3)
+#define ASSERT_LAST_ACTION_CHANGED (1 << 4)
+#define ASSERT_NO_ACTION_CHANGE (1 << 5)
+
+#define PSR_ASSERT_FLAGS (3 << 6)
+#define ASSERT_PSR_ENABLED (1 << 6)
+#define ASSERT_PSR_DISABLED (1 << 7)
+
+#define DRRS_ASSERT_FLAGS (7 << 8)
+#define ASSERT_DRRS_HIGH (1 << 8)
+#define ASSERT_DRRS_LOW (1 << 9)
+#define ASSERT_DRRS_INACTIVE (1 << 10)
- igt_debug("Methods %s and %s\n",
- igt_draw_get_method_name(m1),
- igt_draw_get_method_name(m2));
+#define ASSERT_NO_IDLE_GPU (1 << 11)
- if (!igt_draw_supports_method(drm.fd, m1) ||
- !igt_draw_supports_method(drm.fd, m2))
- continue;
+static int adjust_assertion_flags(const struct test_mode *t, int flags)
+{
+ if (!(flags & DONT_ASSERT_FEATURE_STATUS)) {
+ if (!(flags & ASSERT_FBC_DISABLED))
+ flags |= ASSERT_FBC_ENABLED;
+ if (!(flags & ASSERT_PSR_DISABLED))
+ flags |= ASSERT_PSR_ENABLED;
+ if (!((flags & ASSERT_DRRS_LOW) ||
+ (flags & ASSERT_DRRS_INACTIVE)))
+ flags |= ASSERT_DRRS_HIGH;
+ }
- for (r = 0; r < pattern->n_rects; r++) {
- used_method = (r % 2 == 0) ? m1 : m2;
+ if ((t->feature & FEATURE_FBC) == 0 || (flags & DONT_ASSERT_FBC_STATUS))
+ flags &= ~FBC_ASSERT_FLAGS;
+ if ((t->feature & FEATURE_PSR) == 0)
+ flags &= ~PSR_ASSERT_FLAGS;
+ if ((t->feature & FEATURE_DRRS) == 0)
+ flags &= ~DRRS_ASSERT_FLAGS;
- igt_debug("Used method %s\n",
- igt_draw_get_method_name(used_method));
+ return flags;
+}
- draw_rect(pattern, target, used_method, r);
+static void do_crc_assertions(int flags)
+{
+ igt_crc_t crc;
- if (used_method == IGT_DRAW_MMAP_WC ||
- used_method == IGT_DRAW_MMAP_GTT)
- wc_used = true;
+ if (!opt.check_crc || (flags & DONT_ASSERT_CRC))
+ return;
- update_wanted_crc(t,
- &pattern->crcs[t->format][r]);
+ collect_crc(&crc);
+ print_crc("Calculated CRC:", &crc);
- assertions = used_method != IGT_DRAW_MMAP_GTT ?
- ASSERT_LAST_ACTION_CHANGED :
- ASSERT_NO_ACTION_CHANGE;
- if (op_disables_psr(t, used_method) &&
- !wc_used)
- assertions |= ASSERT_PSR_DISABLED;
+ igt_assert(wanted_crc);
+ igt_assert_crc_equal(&crc, wanted_crc);
+}
- do_assertions(assertions);
- }
+static void do_status_assertions(int flags)
+{
+ if (!opt.check_status) {
+ /* Make sure we settle before continuing. */
+ sleep(1);
+ return;
+ }
- fill_fb_region(target, COLOR_PRIM_BG);
- _fb_dirty_ioctl(target);
+ if (flags & ASSERT_DRRS_HIGH) {
+ if (!is_drrs_high()) {
+ drrs_print_status();
+ igt_assert_f(false, "DRRS HIGH\n");
+ }
+ } else if (flags & ASSERT_DRRS_LOW) {
+ if (!drrs_wait_until_rr_switch_to_low()) {
+ drrs_print_status();
+ igt_assert_f(false, "DRRS LOW\n");
+ }
+ } else if (flags & ASSERT_DRRS_INACTIVE) {
+ if (!intel_is_drrs_inactive(drm.fd, prim_mode_params.pipe)) {
+ drrs_print_status();
+ igt_assert_f(false, "DRRS INACTIVE\n");
+ }
+ }
- update_wanted_crc(t, &blue_crcs[t->format].crc);
- do_assertions(ASSERT_NO_ACTION_CHANGE);
+ if (flags & ASSERT_FBC_ENABLED) {
+ igt_require(!fbc_not_enough_stolen());
+ igt_require(!fbc_stride_not_supported());
+ igt_require(!fbc_mode_too_large());
+ if (!intel_fbc_wait_until_enabled(drm.fd, prim_mode_params.pipe)) {
+ igt_assert_f(intel_fbc_is_enabled(drm.fd,
+ prim_mode_params.pipe,
+ IGT_LOG_WARN),
+ "FBC disabled\n");
}
+
+ if (opt.fbc_check_compression)
+ igt_assert(fbc_wait_for_compression());
+ } else if (flags & ASSERT_FBC_DISABLED) {
+ igt_assert(!intel_fbc_wait_until_enabled(drm.fd,
+ prim_mode_params.pipe));
}
+
+ if (flags & ASSERT_PSR_ENABLED)
+ igt_assert_f(psr_wait_entry(drm.debugfs, PSR_MODE_1),
+ "PSR still disabled\n");
+ else if (flags & ASSERT_PSR_DISABLED)
+ igt_assert_f(psr_wait_update(drm.debugfs, PSR_MODE_1),
+ "PSR still enabled\n");
}
-static bool format_is_valid(int feature_flags,
- enum pixel_format format)
+static void __do_assertions(const struct test_mode *t, int flags,
+ int line)
{
- int devid = intel_get_drm_devid(drm.fd);
+ flags = adjust_assertion_flags(t, flags);
- if (!(feature_flags & FEATURE_FBC))
- return true;
+ /* Make sure any submitted rendering is now idle. */
+ if (!(flags & ASSERT_NO_IDLE_GPU))
+ gem_quiescent_gpu(drm.fd);
- switch (format) {
- case FORMAT_RGB888:
- return true;
- case FORMAT_RGB565:
- if (IS_GEN2(devid) || IS_G4X(devid))
- return false;
- return true;
- case FORMAT_RGB101010:
- return false;
- default:
- igt_assert(false);
+ igt_debug("checking asserts in line %i\n", line);
+
+ wait_user(2, "Paused before assertions.");
+
+ /* Check the CRC to make sure the drawing operations work
+ * immediately, independently of the features being enabled. */
+ do_crc_assertions(flags);
+
+ /* Now we can flush things to make the test faster. */
+ do_flush(t);
+
+ do_status_assertions(flags);
+
+ /* Check CRC again to make sure the compressed screen is ok,
+ * except if we're not drawing on the primary screen. On this
+ * case, the first check should be enough and a new CRC check
+ * would only delay the test suite while adding no value to the
+ * test suite. */
+ if (t->screen == SCREEN_PRIM)
+ do_crc_assertions(flags);
+
+ if (fbc.supports_last_action && opt.fbc_check_last_action) {
+ if (flags & ASSERT_LAST_ACTION_CHANGED)
+ igt_assert(fbc_last_action_changed());
+ else if (flags & ASSERT_NO_ACTION_CHANGE)
+ igt_assert(!fbc_last_action_changed());
}
-}
-/*
- * badformat - test pixel formats that are not supported by at least one feature
- *
- * METHOD
- * We just do a modeset on a buffer with the given pixel format and check the
- * status of the relevant features.
- *
- * EXPECTED RESULTS
- * No assertion failures :)
- *
- * FAILURES
- * If you get a feature enabled/disabled assertion failure, then you should
- * probably check the Kernel code for the feature that checks the pixel
- * formats. If you get a CRC assertion failure, then you should use the
- * appropriate command line arguments that will allow you to look at the
- * screen, then judge what to do based on what you see.
- */
-static void badformat_subtest(const struct test_mode *t)
-{
- bool fbc_valid = format_is_valid(FEATURE_FBC, t->format);
- bool psr_valid = format_is_valid(FEATURE_PSR, t->format);
- int assertions = ASSERT_NO_ACTION_CHANGE;
+ wait_user(1, "Paused after assertions.");
+}
- prepare_subtest_data(t, NULL);
+#define do_assertions(__flags) __do_assertions(t, (__flags), __LINE__)
+static void enable_prim_screen_and_wait(const struct test_mode *t)
+{
fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
set_mode_for_params(&prim_mode_params);
wanted_crc = &blue_crcs[t->format].crc;
+ fbc_update_last_action();
- if (!fbc_valid)
- assertions |= ASSERT_FBC_DISABLED;
- if (!psr_valid)
- assertions |= ASSERT_PSR_DISABLED;
- do_assertions(assertions);
+ do_assertions(ASSERT_NO_ACTION_CHANGE);
}
-/**
- * SUBTEST: drrs-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @rgb101010: FORMAT_RGB101010
- * @rgb565: FORMAT_RGB565
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @mmap-wc: MMAP-WC
- * @render: Render
- */
+static void update_modeset_cached_params(void)
+{
+ bool found = false;
+
+ igt_output_set_pipe(prim_mode_params.output, prim_mode_params.pipe);
+ igt_output_set_pipe(scnd_mode_params.output, scnd_mode_params.pipe);
+
+ found = igt_override_all_active_output_modes_to_fit_bw(&drm.display);
+ igt_require_f(found, "No valid mode combo found.\n");
-/**
- * SUBTEST: drrs-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%s-draw-%s
- * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @rgb101010: FORMAT_RGB101010
- * @rgb565: FORMAT_RGB565
- *
- * arg[2]:
- *
- * @mmap-cpu: MMAP-CPU
- * @mmap-gtt: MMAP-GTT
- * @pwrite: PWRITE
- */
+ prim_mode_params.mode = *igt_output_get_mode(prim_mode_params.output);
+ prim_mode_params.primary.w = prim_mode_params.mode.hdisplay;
+ prim_mode_params.primary.h = prim_mode_params.mode.vdisplay;
-/*
- * format_draw - test pixel formats that are not FORMAT_DEFAULT
- *
- * METHOD
- * The real subtest to be executed depends on whether the pixel format is
- * supported by the features being tested or not. Check the documentation of
- * each subtest.
- *
- * EXPECTED RESULTS
- * See the documentation for each subtest.
- *
- * FAILURES
- * See the documentation for each subtest.
- */
-static void format_draw_subtest(const struct test_mode *t)
+ scnd_mode_params.mode = *igt_output_get_mode(scnd_mode_params.output);
+ scnd_mode_params.primary.w = scnd_mode_params.mode.hdisplay;
+ scnd_mode_params.primary.h = scnd_mode_params.mode.vdisplay;
+
+ fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
+ fill_fb_region(&scnd_mode_params.primary, COLOR_SCND_BG);
+
+ __set_mode_for_params(&prim_mode_params);
+ __set_mode_for_params(&scnd_mode_params);
+}
+
+static void enable_both_screens_and_wait(const struct test_mode *t)
{
- if (format_is_valid(t->feature, t->format))
- draw_subtest(t);
+ int ret;
+
+ fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
+ fill_fb_region(&scnd_mode_params.primary, COLOR_SCND_BG);
+
+ __set_mode_for_params(&prim_mode_params);
+ __set_mode_for_params(&scnd_mode_params);
+
+ if (drm.display.is_atomic)
+ ret = igt_display_try_commit_atomic(&drm.display,
+ DRM_MODE_ATOMIC_TEST_ONLY |
+ DRM_MODE_ATOMIC_ALLOW_MODESET,
+ NULL);
else
- badformat_subtest(t);
+ ret = igt_display_try_commit2(&drm.display, COMMIT_LEGACY);
+
+ if (ret)
+ update_modeset_cached_params();
+
+ igt_display_commit2(&drm.display, drm.display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+
+ wanted_crc = &blue_crcs[t->format].crc;
+ fbc_update_last_action();
+
+ do_assertions(ASSERT_NO_ACTION_CHANGE);
}
-static bool tiling_is_valid(int feature_flags, enum tiling_type tiling)
+static void set_region_for_test(const struct test_mode *t,
+ struct fb_region *reg)
{
- int devid = intel_get_drm_devid(drm.fd);
+ fill_fb_region(reg, COLOR_PRIM_BG);
- if (!(feature_flags & FEATURE_FBC))
- return true;
+ igt_plane_set_fb(reg->plane, reg->fb);
+ igt_plane_set_position(reg->plane, 0, 0);
+ igt_plane_set_size(reg->plane, reg->w, reg->h);
+ igt_fb_set_size(reg->fb, reg->plane, reg->w, reg->h);
- switch (tiling) {
- case TILING_LINEAR:
- return AT_LEAST_GEN(devid, 9);
- case TILING_X:
- case TILING_Y:
- return true;
- case TILING_4:
- return AT_LEAST_GEN(devid, 12);
- default:
- igt_assert(false);
- return false;
- }
+ igt_display_commit(&drm.display);
+ do_assertions(ASSERT_NO_ACTION_CHANGE);
}
-/**
- * SUBTEST: drrs-slowdraw
- * Description: Sleep a little bit between drawing operations with DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-slowdraw
- * Description: Sleep a little bit between drawing operations with PSR
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-slowdraw
- * Description: Sleep a little bit between drawing operations with FBC & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-slowdraw
- * Description: Sleep a little bit between drawing operations with FBC & PSR
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-slowdraw
- * Description: Sleep a little bit between drawing operations with PSR & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-slowdraw
- * Description: Sleep a little bit between drawing operations with FBC, PSR & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- */
+static bool enable_features_for_test(const struct test_mode *t)
+{
+ bool ret = false;
-/*
- * slow_draw - sleep a little bit between drawing operations
- *
- * METHOD
- * This test is basically the same as the draw subtest, except that we sleep a
- * little bit after each drawing operation. The goal is to detect problems
- * that can happen in case a drawing operation is done while the machine is in
- * some deep sleep states.
- *
- * EXPECTED RESULTS
- * The pattern appears on the screen as expected.
- *
- * FAILURES
- * I've seen this happen in a SKL machine and still haven't investigated it.
- * My guess would be that preventing deep sleep states fixes the problem.
- */
-static void slow_draw_subtest(const struct test_mode *t)
+ if (t->feature == FEATURE_DEFAULT)
+ return false;
+
+ if (t->feature & FEATURE_FBC)
+ intel_fbc_enable(drm.fd);
+ if (t->feature & FEATURE_PSR)
+ ret = psr_enable(drm.fd, drm.debugfs, PSR_MODE_1);
+ if (t->feature & FEATURE_DRRS)
+ intel_drrs_enable(drm.fd, prim_mode_params.pipe);
+
+ return ret;
+}
+
+static void check_test_requirements(const struct test_mode *t)
{
- int r;
- struct draw_pattern_info *pattern = &pattern1;
- struct modeset_params *params = pick_params(t);
- struct fb_region *target;
+ int ver;
- prepare_subtest(t, pattern);
- sleep(2);
- target = pick_target(t, params);
+ if (t->pipes == PIPE_DUAL)
+ igt_require_f(scnd_mode_params.output,
+ "Can't test dual pipes with the current outputs\n");
- for (r = 0; r < pattern->n_rects; r++) {
- sleep(2);
- draw_rect(pattern, target, t->method, r);
- sleep(2);
+ if (t->feature & FEATURE_FBC)
+ igt_require_f(fbc.can_test,
+ "Can't test FBC with this chipset\n");
+
+ if (t->feature & FEATURE_PSR) {
+ igt_require_f(psr.can_test,
+ "Can't test PSR with the current outputs\n");
+ }
+
+ if (t->feature & FEATURE_DRRS)
+ igt_require_f(drrs.can_test,
+ "Can't test DRRS with the current outputs\n");
+
+ /*
+ * In kernel, When PSR is enabled, DRRS will be disabled. So If a test
+ * case needs DRRS + PSR enabled, that will be skipped.
+ */
+ igt_require_f(!((t->feature & FEATURE_PSR) &&
+ (t->feature & FEATURE_DRRS)),
+ "Can't test PSR and DRRS together\n");
- update_wanted_crc(t, &pattern->crcs[t->format][r]);
+ if (opt.only_pipes != PIPE_COUNT)
+ igt_require(t->pipes == opt.only_pipes);
- if (t->feature & FEATURE_DRRS)
- do_assertions(ASSERT_DRRS_LOW);
- else
- do_assertions(0);
- }
-}
+ /* Kernel disables fbc for display versions 12 and 13 if psr is enabled. */
+ ver = intel_display_ver(intel_get_drm_devid(drm.fd));
+ if (ver >= 12 && ver <= 13)
+ igt_require_f(!((t->feature & FEATURE_PSR) &&
+ (t->feature & FEATURE_FBC)),
+ "Can't test PSR and FBC together\n");
-static void flip_handler(int fd, unsigned int sequence, unsigned int tv_sec,
- unsigned int tv_usec, void *data)
-{
- igt_debug("Flip event received.\n");
}
-static void wait_flip_event(void)
+static void set_crtc_fbs(const struct test_mode *t)
{
- int rc;
- drmEventContext evctx;
- struct pollfd pfd;
+ struct screen_fbs *s = &fbs[t->format];
- evctx.version = 2;
- evctx.vblank_handler = NULL;
- evctx.page_flip_handler = flip_handler;
+ create_fbs(t->format, t->tiling);
- pfd.fd = drm.fd;
- pfd.events = POLLIN;
- pfd.revents = 0;
+ switch (t->fbs) {
+ case FBS_INDIVIDUAL:
+ prim_mode_params.primary.fb = &s->prim_pri;
+ scnd_mode_params.primary.fb = &s->scnd_pri;
+ offscreen_fb.fb = &s->offscreen;
- rc = poll(&pfd, 1, TIME);
- switch (rc) {
- case 0:
- igt_assert_f(false, "Poll timeout\n");
+ prim_mode_params.primary.x = 0;
+ scnd_mode_params.primary.x = 0;
+ offscreen_fb.x = 0;
+
+ prim_mode_params.primary.y = 0;
+ scnd_mode_params.primary.y = 0;
+ offscreen_fb.y = 0;
break;
- case 1:
- rc = drmHandleEvent(drm.fd, &evctx);
- igt_assert_eq(rc, 0);
+ case FBS_SHARED:
+ /* Please see the comment at the top of create_shared_fb(). */
+ prim_mode_params.primary.fb = &s->big;
+ scnd_mode_params.primary.fb = &s->big;
+ offscreen_fb.fb = &s->big;
+
+ prim_mode_params.primary.x = opt.shared_fb_x_offset;
+ scnd_mode_params.primary.x = opt.shared_fb_x_offset;
+ offscreen_fb.x = opt.shared_fb_x_offset;
+
+ prim_mode_params.primary.y = opt.shared_fb_y_offset;
+ scnd_mode_params.primary.y = prim_mode_params.primary.y +
+ prim_mode_params.primary.h;
+ offscreen_fb.y = scnd_mode_params.primary.y + scnd_mode_params.primary.h;
break;
default:
- igt_assert_f(false, "Unexpected poll rc %d\n", rc);
- break;
+ igt_assert(false);
}
+
+ prim_mode_params.cursor.fb = &s->prim_cur;
+ prim_mode_params.sprite.fb = &s->prim_spr;
+ scnd_mode_params.cursor.fb = &s->scnd_cur;
+ scnd_mode_params.sprite.fb = &s->scnd_spr;
}
-static void set_prim_plane_for_params(struct modeset_params *params)
+static void prepare_subtest_data(const struct test_mode *t,
+ struct draw_pattern_info *pattern)
{
- __set_prim_plane_for_params(params);
- igt_display_commit2(&drm.display, COMMIT_UNIVERSAL);
+ bool need_modeset;
+
+ check_test_requirements(t);
+
+ stop_busy_thread();
+
+ need_modeset = disable_features(t);
+ set_crtc_fbs(t);
+
+ if (t->screen == SCREEN_OFFSCREEN)
+ fill_fb_region(&offscreen_fb, COLOR_OFFSCREEN_BG);
+
+ igt_display_reset(&drm.display);
+ if (need_modeset)
+ igt_display_commit(&drm.display);
+
+ init_blue_crc(t->format, t->tiling);
+ if (pattern)
+ init_crcs(t->format, t->tiling, pattern);
+
+ need_modeset = enable_features_for_test(t);
+ if (need_modeset)
+ igt_display_commit(&drm.display);
}
-static void page_flip_for_params(struct modeset_params *params,
- enum flip_type type)
+static void prepare_subtest_screens(const struct test_mode *t)
{
- int rc;
+ if (t->pipes == PIPE_DUAL)
+ enable_both_screens_and_wait(t);
+ else
+ enable_prim_screen_and_wait(t);
- switch (type) {
- case FLIP_PAGEFLIP:
- rc = drmModePageFlip(drm.fd, drm.display.pipes[params->pipe].crtc_id,
- params->primary.fb->fb_id,
- DRM_MODE_PAGE_FLIP_EVENT, NULL);
- igt_assert_eq(rc, 0);
- wait_flip_event();
- break;
- case FLIP_MODESET:
- set_mode_for_params(params);
- break;
- case FLIP_PLANES:
- set_prim_plane_for_params(params);
- break;
- default:
- igt_assert(false);
+ if (t->screen == SCREEN_PRIM) {
+ if (t->plane == PLANE_CUR)
+ set_region_for_test(t, &prim_mode_params.cursor);
+ if (t->plane == PLANE_SPR)
+ set_region_for_test(t, &prim_mode_params.sprite);
}
-}
-/**
- * SUBTEST: drrs-%dp-primscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-primscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-primscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-primscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-primscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-primscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- *
- * arg[2]:
- *
- * @indfb: Individual fb
- * @shrfb: Shared fb
- *
- * arg[3]:
- *
- * @ms: Modeset
- * @pg: Page flip
- * @pl: Plane change
- */
+ if (t->pipes == PIPE_DUAL && t->screen == SCREEN_SCND) {
+ if (t->plane == PLANE_CUR)
+ set_region_for_test(t, &scnd_mode_params.cursor);
+ if (t->plane == PLANE_SPR)
+ set_region_for_test(t, &scnd_mode_params.sprite);
+ }
+}
-/**
- * SUBTEST: drrs-2p-scndscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-2p-scndscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-2p-scndscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-2p-scndscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-2p-scndscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-2p-scndscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-%sflip-blt
- * Description: Just exercise page flips with the patterns we have
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
+static void prepare_subtest(const struct test_mode *t,
+ struct draw_pattern_info *pattern)
+{
+ prepare_subtest_data(t, pattern);
+ prepare_subtest_screens(t);
+}
+
+/*
+ * rte - the basic sanity test
*
- * @indfb: Individual fb
- * @shrfb: Shared fb
+ * METHOD
+ * Just disable all screens, assert everything is disabled, then enable all
+ * screens - including primary, cursor and sprite planes - and assert that
+ * the tested feature is enabled.
*
- * arg[2]:
+ * EXPECTED RESULTS
+ * Blue screens and t->feature enabled.
*
- * @ms: Modeset
- * @pg: Page flip
- * @pl: Plane change
+ * FAILURES
+ * A failure here means that every other subtest will probably fail too. It
+ * probably means that the Kernel is just not enabling the feature we want.
*/
+static void rte_subtest(const struct test_mode *t)
+{
+ prepare_subtest_data(t, NULL);
+
+ unset_all_crtcs();
+ do_assertions(ASSERT_FBC_DISABLED | ASSERT_PSR_DISABLED |
+ DONT_ASSERT_CRC | ASSERT_DRRS_INACTIVE);
+
+ if (t->pipes == PIPE_SINGLE)
+ enable_prim_screen_and_wait(t);
+ else
+ enable_both_screens_and_wait(t);
+
+ set_region_for_test(t, &prim_mode_params.cursor);
+ set_region_for_test(t, &prim_mode_params.sprite);
+
+ if (t->pipes == PIPE_DUAL) {
+ set_region_for_test(t, &scnd_mode_params.cursor);
+ set_region_for_test(t, &scnd_mode_params.sprite);
+ }
+}
+
+static void update_wanted_crc(const struct test_mode *t, igt_crc_t *crc)
+{
+ if (t->screen == SCREEN_PRIM)
+ wanted_crc = crc;
+}
+
+static bool op_disables_psr(const struct test_mode *t,
+ enum igt_draw_method method)
+{
+ if (method != IGT_DRAW_MMAP_GTT)
+ return false;
+ if (t->screen == SCREEN_PRIM)
+ return true;
+ /* On FBS_SHARED, even if the target is not the PSR screen
+ * (SCREEN_PRIM), all primary planes share the same frontbuffer, so a
+ * write to the second screen primary plane - or offscreen plane - will
+ * touch the framebuffer that's also used by the primary screen. */
+ if (t->fbs == FBS_SHARED && t->plane == PLANE_PRI)
+ return true;
+
+ return false;
+}
/*
- * flip - just exercise page flips with the patterns we have
+ * draw - draw a set of rectangles on the screen using the provided method
*
* METHOD
- * We draw the pattern on a backbuffer using the provided method, then we
- * flip, making this the frontbuffer. We can flip both using the dedicated
- * pageflip IOCTL or the modeset IOCTL.
+ * Just set the screens as appropriate and then start drawing a series of
+ * rectangles on the target screen. The important guy here is the drawing
+ * method used.
*
* EXPECTED RESULTS
- * Everything works as expected, screen contents are properly updated.
+ * The feature either stays enabled or gets reenabled after the oprations. You
+ * will also see the rectangles on the target screen.
*
* FAILURES
- * On a failure here you need to go directly to the Kernel's flip code and see
- * how it interacts with the feature being tested.
+ * A failure here indicates a problem somewhere between the Kernel's
+ * frontbuffer tracking infrastructure or the feature itself. You need to pay
+ * attention to which drawing method is being used.
*/
-static void flip_subtest(const struct test_mode *t)
+static void draw_subtest(const struct test_mode *t)
{
int r;
int assertions = 0;
- struct igt_fb fb2, *orig_fb;
+ struct draw_pattern_info *pattern;
struct modeset_params *params = pick_params(t);
- struct draw_pattern_info *pattern = &pattern1;
- enum color bg_color;
+ struct fb_region *target;
switch (t->screen) {
case SCREEN_PRIM:
- assertions |= ASSERT_LAST_ACTION_CHANGED;
- bg_color = COLOR_PRIM_BG;
+ if (t->method != IGT_DRAW_MMAP_GTT && t->plane == PLANE_PRI)
+ assertions |= ASSERT_LAST_ACTION_CHANGED;
+ else
+ assertions |= ASSERT_NO_ACTION_CHANGE;
break;
case SCREEN_SCND:
+ case SCREEN_OFFSCREEN:
assertions |= ASSERT_NO_ACTION_CHANGE;
- bg_color = COLOR_SCND_BG;
break;
default:
igt_assert(false);
}
- prepare_subtest(t, pattern);
+ switch (t->plane) {
+ case PLANE_PRI:
+ pattern = &pattern1;
+ break;
+ case PLANE_CUR:
+ case PLANE_SPR:
+ pattern = &pattern2;
+ break;
+ default:
+ igt_assert(false);
+ }
- create_fb(t->format, params->primary.fb->width, params->primary.fb->height,
- t->tiling, t->plane, &fb2);
- fill_fb(&fb2, bg_color);
- orig_fb = params->primary.fb;
+ if (op_disables_psr(t, t->method))
+ assertions |= ASSERT_PSR_DISABLED;
+
+ /*
+ * On FBS_INDIVIDUAL, write to offscreen plane will not touch the
+ * current frambuffer. Hence assert for DRRS_LOW.
+ */
+ if ((t->fbs == FBS_INDIVIDUAL) && (t->screen == SCREEN_OFFSCREEN))
+ assertions |= ASSERT_DRRS_LOW;
+
+ prepare_subtest(t, pattern);
+ target = pick_target(t, params);
for (r = 0; r < pattern->n_rects; r++) {
- params->primary.fb = (r % 2 == 0) ? &fb2 : orig_fb;
+ igt_debug("Drawing rect %d\n", r);
+ draw_rect(pattern, target, t->method, r);
+ update_wanted_crc(t, &pattern->crcs[t->format][r]);
+ do_assertions(assertions);
+ }
+}
+
+/*
+ * multidraw - draw a set of rectangles on the screen using alternated drawing
+ * methods
+ *
+ * METHOD
+ * This is just like the draw subtest, but now we keep alternating between two
+ * drawing methods. Each time we run multidraw_subtest we will test all the
+ * possible pairs of drawing methods.
+ *
+ * EXPECTED RESULTS
+ * The same as the draw subtest.
+ *
+ * FAILURES
+ * If you get a failure here, first you need to check whether you also get
+ * failures on the individual draw subtests. If yes, then go fix every single
+ * draw subtest first. If all the draw subtests pass but this one fails, then
+ * you have to study how one drawing method is stopping the other from
+ * properly working.
+ */
+static void multidraw_subtest(const struct test_mode *t)
+{
+ int r;
+ int assertions = 0;
+ struct draw_pattern_info *pattern;
+ struct modeset_params *params = pick_params(t);
+ struct fb_region *target;
+ enum igt_draw_method m1, m2, used_method;
+ bool wc_used = false;
+
+ switch (t->plane) {
+ case PLANE_PRI:
+ pattern = &pattern1;
+ break;
+ case PLANE_CUR:
+ case PLANE_SPR:
+ pattern = &pattern2;
+ break;
+ default:
+ igt_assert(false);
+ }
+
+ prepare_subtest(t, pattern);
+ target = pick_target(t, params);
+
+ for (m1 = 0; m1 < IGT_DRAW_METHOD_COUNT; m1++) {
+ for (m2 = m1 + 1; m2 < IGT_DRAW_METHOD_COUNT; m2++) {
+
+ igt_debug("Methods %s and %s\n",
+ igt_draw_get_method_name(m1),
+ igt_draw_get_method_name(m2));
+
+ if (!igt_draw_supports_method(drm.fd, m1) ||
+ !igt_draw_supports_method(drm.fd, m2))
+ continue;
+
+ for (r = 0; r < pattern->n_rects; r++) {
+ used_method = (r % 2 == 0) ? m1 : m2;
+
+ igt_debug("Used method %s\n",
+ igt_draw_get_method_name(used_method));
+
+ draw_rect(pattern, target, used_method, r);
+
+ if (used_method == IGT_DRAW_MMAP_WC ||
+ used_method == IGT_DRAW_MMAP_GTT)
+ wc_used = true;
+
+ update_wanted_crc(t,
+ &pattern->crcs[t->format][r]);
+
+ assertions = used_method != IGT_DRAW_MMAP_GTT ?
+ ASSERT_LAST_ACTION_CHANGED :
+ ASSERT_NO_ACTION_CHANGE;
+ if (op_disables_psr(t, used_method) &&
+ !wc_used)
+ assertions |= ASSERT_PSR_DISABLED;
+
+ do_assertions(assertions);
+ }
+
+ fill_fb_region(target, COLOR_PRIM_BG);
+ _fb_dirty_ioctl(target);
+
+ update_wanted_crc(t, &blue_crcs[t->format].crc);
+ do_assertions(ASSERT_NO_ACTION_CHANGE);
+ }
+ }
+}
+
+static bool format_is_valid(int feature_flags,
+ enum pixel_format format)
+{
+ int devid = intel_get_drm_devid(drm.fd);
+
+ if (!(feature_flags & FEATURE_FBC))
+ return true;
+
+ switch (format) {
+ case FORMAT_RGB888:
+ return true;
+ case FORMAT_RGB565:
+ if (IS_GEN2(devid) || IS_G4X(devid))
+ return false;
+ return true;
+ case FORMAT_RGB101010:
+ return false;
+ default:
+ igt_assert(false);
+ }
+}
+
+/*
+ * badformat - test pixel formats that are not supported by at least one feature
+ *
+ * METHOD
+ * We just do a modeset on a buffer with the given pixel format and check the
+ * status of the relevant features.
+ *
+ * EXPECTED RESULTS
+ * No assertion failures :)
+ *
+ * FAILURES
+ * If you get a feature enabled/disabled assertion failure, then you should
+ * probably check the Kernel code for the feature that checks the pixel
+ * formats. If you get a CRC assertion failure, then you should use the
+ * appropriate command line arguments that will allow you to look at the
+ * screen, then judge what to do based on what you see.
+ */
+static void badformat_subtest(const struct test_mode *t)
+{
+ bool fbc_valid = format_is_valid(FEATURE_FBC, t->format);
+ bool psr_valid = format_is_valid(FEATURE_PSR, t->format);
+ int assertions = ASSERT_NO_ACTION_CHANGE;
- if (r != 0)
- draw_rect(pattern, ¶ms->primary, t->method, r - 1);
- draw_rect(pattern, ¶ms->primary, t->method, r);
- update_wanted_crc(t, &pattern->crcs[t->format][r]);
+ prepare_subtest_data(t, NULL);
- page_flip_for_params(params, t->flip);
+ fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
+ set_mode_for_params(&prim_mode_params);
- do_assertions(assertions);
- }
+ wanted_crc = &blue_crcs[t->format].crc;
- igt_remove_fb(drm.fd, &fb2);
+ if (!fbc_valid)
+ assertions |= ASSERT_FBC_DISABLED;
+ if (!psr_valid)
+ assertions |= ASSERT_PSR_DISABLED;
+ do_assertions(assertions);
}
-/**
- * SUBTEST: fbc-%dp-%s-fliptrack-mmap-gtt
- * Description: Check if the hardware tracking works after page flips
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-%s-fliptrack-mmap-gtt
- * Description: Check if the hardware tracking works after page flips
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-%s-fliptrack-mmap-gtt
- * Description: Check if the hardware tracking works after page flips
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-%s-fliptrack-mmap-gtt
- * Description: Check if the hardware tracking works after page flips
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
+/*
+ * format_draw - test pixel formats that are not FORMAT_DEFAULT
*
- * arg[1].values: 1, 2
+ * METHOD
+ * The real subtest to be executed depends on whether the pixel format is
+ * supported by the features being tested or not. Check the documentation of
+ * each subtest.
*
- * arg[2]:
+ * EXPECTED RESULTS
+ * See the documentation for each subtest.
*
- * @indfb: Individual fb
- * @shrfb: Shared fb
+ * FAILURES
+ * See the documentation for each subtest.
*/
+static void format_draw_subtest(const struct test_mode *t)
+{
+ if (format_is_valid(t->feature, t->format))
+ draw_subtest(t);
+ else
+ badformat_subtest(t);
+}
+
+static bool tiling_is_valid(int feature_flags, enum tiling_type tiling)
+{
+ int devid = intel_get_drm_devid(drm.fd);
+
+ if (!(feature_flags & FEATURE_FBC))
+ return true;
+
+ switch (tiling) {
+ case TILING_LINEAR:
+ return AT_LEAST_GEN(devid, 9);
+ case TILING_X:
+ case TILING_Y:
+ return true;
+ case TILING_4:
+ return AT_LEAST_GEN(devid, 12);
+ default:
+ igt_assert(false);
+ return false;
+ }
+}
/*
- * fliptrack - check if the hardware tracking works after page flips
+ * slow_draw - sleep a little bit between drawing operations
*
* METHOD
- * Flip to a new buffer, then draw on it using MMAP_GTT and check the CRC to
- * make sure the hardware tracking detected the write.
+ * This test is basically the same as the draw subtest, except that we sleep a
+ * little bit after each drawing operation. The goal is to detect problems
+ * that can happen in case a drawing operation is done while the machine is in
+ * some deep sleep states.
*
* EXPECTED RESULTS
- * Everything works as expected, screen contents are properly updated.
+ * The pattern appears on the screen as expected.
*
* FAILURES
- * First you need to check if the draw and flip subtests pass. Only after both
- * are passing this test can be useful. If we're failing only on this subtest,
- * then maybe we are not properly updating the hardware tracking registers
- * during the flip operations.
+ * I've seen this happen in a SKL machine and still haven't investigated it.
+ * My guess would be that preventing deep sleep states fixes the problem.
*/
-static void fliptrack_subtest(const struct test_mode *t, enum flip_type type)
+static void slow_draw_subtest(const struct test_mode *t)
{
int r;
- struct igt_fb fb2, *orig_fb;
- struct modeset_params *params = pick_params(t);
struct draw_pattern_info *pattern = &pattern1;
+ struct modeset_params *params = pick_params(t);
+ struct fb_region *target;
prepare_subtest(t, pattern);
-
- create_fb(t->format, params->primary.fb->width, params->primary.fb->height,
- t->tiling, t->plane, &fb2);
- fill_fb(&fb2, COLOR_PRIM_BG);
- orig_fb = params->primary.fb;
+ sleep(2);
+ target = pick_target(t, params);
for (r = 0; r < pattern->n_rects; r++) {
- params->primary.fb = (r % 2 == 0) ? &fb2 : orig_fb;
-
- if (r != 0)
- draw_rect(pattern, ¶ms->primary, t->method, r - 1);
-
- page_flip_for_params(params, type);
- do_assertions(0);
+ sleep(2);
+ draw_rect(pattern, target, t->method, r);
+ sleep(2);
- draw_rect(pattern, ¶ms->primary, t->method, r);
update_wanted_crc(t, &pattern->crcs[t->format][r]);
- do_assertions(ASSERT_PSR_DISABLED);
+ if (t->feature & FEATURE_DRRS)
+ do_assertions(ASSERT_DRRS_LOW);
+ else
+ do_assertions(0);
+ }
+}
+
+static void flip_handler(int fd, unsigned int sequence, unsigned int tv_sec,
+ unsigned int tv_usec, void *data)
+{
+ igt_debug("Flip event received.\n");
+}
+
+static void wait_flip_event(void)
+{
+ int rc;
+ drmEventContext evctx;
+ struct pollfd pfd;
+
+ evctx.version = 2;
+ evctx.vblank_handler = NULL;
+ evctx.page_flip_handler = flip_handler;
+
+ pfd.fd = drm.fd;
+ pfd.events = POLLIN;
+ pfd.revents = 0;
+
+ rc = poll(&pfd, 1, TIME);
+ switch (rc) {
+ case 0:
+ igt_assert_f(false, "Poll timeout\n");
+ break;
+ case 1:
+ rc = drmHandleEvent(drm.fd, &evctx);
+ igt_assert_eq(rc, 0);
+ break;
+ default:
+ igt_assert_f(false, "Unexpected poll rc %d\n", rc);
+ break;
+ }
+}
+
+static void set_prim_plane_for_params(struct modeset_params *params)
+{
+ __set_prim_plane_for_params(params);
+ igt_display_commit2(&drm.display, COMMIT_UNIVERSAL);
+}
+
+static void page_flip_for_params(struct modeset_params *params,
+ enum flip_type type)
+{
+ int rc;
+
+ switch (type) {
+ case FLIP_PAGEFLIP:
+ rc = drmModePageFlip(drm.fd, drm.display.pipes[params->pipe].crtc_id,
+ params->primary.fb->fb_id,
+ DRM_MODE_PAGE_FLIP_EVENT, NULL);
+ igt_assert_eq(rc, 0);
+ wait_flip_event();
+ break;
+ case FLIP_MODESET:
+ set_mode_for_params(params);
+ break;
+ case FLIP_PLANES:
+ set_prim_plane_for_params(params);
+ break;
+ default:
+ igt_assert(false);
}
-
- igt_remove_fb(drm.fd, &fb2);
}
-/**
- * SUBTEST: drrs-%dp-primscrn-%s-indfb-move
- * Description: Just move the %arg[2] around
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-primscrn-%s-indfb-move
- * Description: Just move the %arg[2] around
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-primscrn-%s-indfb-move
- * Description: Just move the %arg[2] around
- * Driver requirement: i915, xe
- * Functionality: fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-move
- * Description: Just move the %arg[2] around
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-move
- * Description: Just move the %arg[2] around
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-primscrn-%s-indfb-move
- * Description: Just move the %arg[2] around
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-indfb-move
- * Description: Just move the %arg[2] around
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- *
- * arg[2]:
- *
- * @spr: Sprite plane
- * @cur: Cursor plane
- */
-
-/**
- * SUBTEST: drrs-2p-scndscrn-%s-indfb-move
- * Description: Just move the %arg[1] around
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-2p-scndscrn-%s-indfb-move
- * Description: Just move the %arg[1] around
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-2p-scndscrn-%s-indfb-move
- * Description: Just move the %arg[1] around
- * Driver requirement: i915, xe
- * Functionality: fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-move
- * Description: Just move the %arg[1] around
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-move
- * Description: Just move the %arg[1] around
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-2p-scndscrn-%s-indfb-move
- * Description: Just move the %arg[1] around
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-indfb-move
- * Description: Just move the %arg[1] around
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @spr: Sprite plane
- * @cur: Cursor plane
- */
-
/*
- * move - just move the sprite or cursor around
+ * flip - just exercise page flips with the patterns we have
*
* METHOD
- * Move the surface around, following the defined pattern.
+ * We draw the pattern on a backbuffer using the provided method, then we
+ * flip, making this the frontbuffer. We can flip both using the dedicated
+ * pageflip IOCTL or the modeset IOCTL.
*
* EXPECTED RESULTS
- * The move operations are properly detected by the Kernel, and the screen is
- * properly updated every time.
+ * Everything works as expected, screen contents are properly updated.
*
* FAILURES
- * If you get a failure here, check how the Kernel is enabling or disabling
- * your feature when it moves the planes around.
+ * On a failure here you need to go directly to the Kernel's flip code and see
+ * how it interacts with the feature being tested.
*/
-static void move_subtest(const struct test_mode *t)
+static void flip_subtest(const struct test_mode *t)
{
int r;
- int assertions = ASSERT_NO_ACTION_CHANGE;
+ int assertions = 0;
+ struct igt_fb fb2, *orig_fb;
struct modeset_params *params = pick_params(t);
- struct draw_pattern_info *pattern = &pattern3;
- struct fb_region *reg = pick_target(t, params);
- bool repeat = false;
-
- prepare_subtest(t, pattern);
+ struct draw_pattern_info *pattern = &pattern1;
+ enum color bg_color;
- /* Just paint the right color since we start at 0x0. */
- draw_rect(pattern, reg, t->method, 0);
- update_wanted_crc(t, &pattern->crcs[t->format][0]);
+ switch (t->screen) {
+ case SCREEN_PRIM:
+ assertions |= ASSERT_LAST_ACTION_CHANGED;
+ bg_color = COLOR_PRIM_BG;
+ break;
+ case SCREEN_SCND:
+ assertions |= ASSERT_NO_ACTION_CHANGE;
+ bg_color = COLOR_SCND_BG;
+ break;
+ default:
+ igt_assert(false);
+ }
- do_assertions(assertions);
+ prepare_subtest(t, pattern);
- for (r = 1; r < pattern->n_rects; r++) {
- struct rect rect = pattern->get_rect(¶ms->primary, r);
+ create_fb(t->format, params->primary.fb->width, params->primary.fb->height,
+ t->tiling, t->plane, &fb2);
+ fill_fb(&fb2, bg_color);
+ orig_fb = params->primary.fb;
- igt_plane_set_fb(reg->plane, reg->fb);
- igt_plane_set_position(reg->plane, rect.x, rect.y);
- igt_plane_set_size(reg->plane, rect.w, rect.h);
- igt_fb_set_size(reg->fb, reg->plane, rect.w, rect.h);
- igt_display_commit2(&drm.display, COMMIT_UNIVERSAL);
+ for (r = 0; r < pattern->n_rects; r++) {
+ params->primary.fb = (r % 2 == 0) ? &fb2 : orig_fb;
+ if (r != 0)
+ draw_rect(pattern, ¶ms->primary, t->method, r - 1);
+ draw_rect(pattern, ¶ms->primary, t->method, r);
update_wanted_crc(t, &pattern->crcs[t->format][r]);
- do_assertions(assertions);
+ page_flip_for_params(params, t->flip);
- /* "Move" the last rect to the same position just to make sure
- * this works too. */
- if (r+1 == pattern->n_rects && !repeat) {
- repeat = true;
- r--;
- }
+ do_assertions(assertions);
}
+
+ igt_remove_fb(drm.fd, &fb2);
}
-/**
- * SUBTEST: drrs-%dp-primscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[2] a few times
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-primscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[2] a few times
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-primscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[2] a few times
- * Driver requirement: i915, xe
- * Functionality: fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[2] a few times
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[2] a few times
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-primscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[2] a few times
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-primscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[2] a few times
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
+/*
+ * fliptrack - check if the hardware tracking works after page flips
*
- * arg[1].values: 1, 2
+ * METHOD
+ * Flip to a new buffer, then draw on it using MMAP_GTT and check the CRC to
+ * make sure the hardware tracking detected the write.
*
- * arg[2]:
+ * EXPECTED RESULTS
+ * Everything works as expected, screen contents are properly updated.
*
- * @spr: Sprite plane
- * @cur: Cursor plane
+ * FAILURES
+ * First you need to check if the draw and flip subtests pass. Only after both
+ * are passing this test can be useful. If we're failing only on this subtest,
+ * then maybe we are not properly updating the hardware tracking registers
+ * during the flip operations.
*/
+static void fliptrack_subtest(const struct test_mode *t, enum flip_type type)
+{
+ int r;
+ struct igt_fb fb2, *orig_fb;
+ struct modeset_params *params = pick_params(t);
+ struct draw_pattern_info *pattern = &pattern1;
-/**
- * SUBTEST: drrs-2p-scndscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[1] a few times
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-2p-scndscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[1] a few times
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-2p-scndscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[1] a few times
- * Driver requirement: i915, xe
- * Functionality: fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[1] a few times
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[1] a few times
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-2p-scndscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[1] a few times
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
+ prepare_subtest(t, pattern);
+
+ create_fb(t->format, params->primary.fb->width, params->primary.fb->height,
+ t->tiling, t->plane, &fb2);
+ fill_fb(&fb2, COLOR_PRIM_BG);
+ orig_fb = params->primary.fb;
+
+ for (r = 0; r < pattern->n_rects; r++) {
+ params->primary.fb = (r % 2 == 0) ? &fb2 : orig_fb;
+
+ if (r != 0)
+ draw_rect(pattern, ¶ms->primary, t->method, r - 1);
+
+ page_flip_for_params(params, type);
+ do_assertions(0);
+
+ draw_rect(pattern, ¶ms->primary, t->method, r);
+ update_wanted_crc(t, &pattern->crcs[t->format][r]);
+
+ do_assertions(ASSERT_PSR_DISABLED);
+ }
+
+ igt_remove_fb(drm.fd, &fb2);
+}
+
+/*
+ * move - just move the sprite or cursor around
*
- * SUBTEST: fbcpsrdrrs-2p-scndscrn-%s-indfb-onoff
- * Description: Just enable and disable the %arg[1] a few times
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
+ * METHOD
+ * Move the surface around, following the defined pattern.
*
- * arg[1]:
+ * EXPECTED RESULTS
+ * The move operations are properly detected by the Kernel, and the screen is
+ * properly updated every time.
*
- * @spr: Sprite plane
- * @cur: Cursor plane
+ * FAILURES
+ * If you get a failure here, check how the Kernel is enabling or disabling
+ * your feature when it moves the planes around.
*/
+static void move_subtest(const struct test_mode *t)
+{
+ int r;
+ int assertions = ASSERT_NO_ACTION_CHANGE;
+ struct modeset_params *params = pick_params(t);
+ struct draw_pattern_info *pattern = &pattern3;
+ struct fb_region *reg = pick_target(t, params);
+ bool repeat = false;
+
+ prepare_subtest(t, pattern);
+
+ /* Just paint the right color since we start at 0x0. */
+ draw_rect(pattern, reg, t->method, 0);
+ update_wanted_crc(t, &pattern->crcs[t->format][0]);
+
+ do_assertions(assertions);
+
+ for (r = 1; r < pattern->n_rects; r++) {
+ struct rect rect = pattern->get_rect(¶ms->primary, r);
+
+ igt_plane_set_fb(reg->plane, reg->fb);
+ igt_plane_set_position(reg->plane, rect.x, rect.y);
+ igt_plane_set_size(reg->plane, rect.w, rect.h);
+ igt_fb_set_size(reg->fb, reg->plane, rect.w, rect.h);
+ igt_display_commit2(&drm.display, COMMIT_UNIVERSAL);
+
+ update_wanted_crc(t, &pattern->crcs[t->format][r]);
+
+ do_assertions(assertions);
+
+ /* "Move" the last rect to the same position just to make sure
+ * this works too. */
+ if (r+1 == pattern->n_rects && !repeat) {
+ repeat = true;
+ r--;
+ }
+ }
+}
/*
* onoff - just enable and disable the sprite or cursor plane a few times
@@ -3778,108 +4168,6 @@ static bool prim_plane_disabled(void)
return !prim_mode_params.primary.plane->values[IGT_PLANE_FB_ID];
}
-/**
- * SUBTEST: drrs-%dp-primscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%dp-primscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%dp-primscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%dp-primscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%dp-primscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%dp-primscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%dp-primscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: drrs-2p-scndscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-2p-scndscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-2p-scndscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-2p-scndscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-2p-scndscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-2p-scndscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-2p-scndscrn-spr-indfb-fullscreen
- * Description: Put a fullscreen plane covering the whole screen
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1].values: 1, 2
- */
-
/*
* fullscreen_plane - put a fullscreen plane covering the whole screen
*
@@ -3915,87 +4203,31 @@ static void fullscreen_plane_subtest(const struct test_mode *t)
igt_display_commit(&drm.display);
update_wanted_crc(t, &pattern->crcs[t->format][0]);
- switch (t->screen) {
- case SCREEN_PRIM:
- assertions = ASSERT_LAST_ACTION_CHANGED;
-
- if (prim_plane_disabled())
- assertions |= ASSERT_FBC_DISABLED;
- break;
- case SCREEN_SCND:
- assertions = ASSERT_NO_ACTION_CHANGE;
- break;
- default:
- igt_assert(false);
- }
- do_assertions(assertions);
-
- igt_plane_set_fb(params->sprite.plane, NULL);
- igt_display_commit(&drm.display);
-
- if (t->screen == SCREEN_PRIM)
- assertions = ASSERT_LAST_ACTION_CHANGED;
- update_wanted_crc(t, &blue_crcs[t->format].crc);
- do_assertions(assertions);
-
- igt_remove_fb(drm.fd, &fullscreen_fb);
-}
-
-/**
- * SUBTEST: drrs-%s-scaledprimary
- * Description: Try different primary plane scaling strategies
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-%s-scaledprimary
- * Description: Try different primary plane scaling strategies
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-%s-scaledprimary
- * Description: Try different primary plane scaling strategies
- * Driver requirement: i915, xe
- * Functionality: fbt, psr, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-%s-scaledprimary
- * Description: Try different primary plane scaling strategies
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-%s-scaledprimary
- * Description: Try different primary plane scaling strategies
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-%s-scaledprimary
- * Description: Try different primary plane scaling strategies
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-%s-scaledprimary
- * Description: Try different primary plane scaling strategies
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @indfb: Individual fb
- * @shrfb: Shared fb
- */
+ switch (t->screen) {
+ case SCREEN_PRIM:
+ assertions = ASSERT_LAST_ACTION_CHANGED;
+
+ if (prim_plane_disabled())
+ assertions |= ASSERT_FBC_DISABLED;
+ break;
+ case SCREEN_SCND:
+ assertions = ASSERT_NO_ACTION_CHANGE;
+ break;
+ default:
+ igt_assert(false);
+ }
+ do_assertions(assertions);
+
+ igt_plane_set_fb(params->sprite.plane, NULL);
+ igt_display_commit(&drm.display);
+
+ if (t->screen == SCREEN_PRIM)
+ assertions = ASSERT_LAST_ACTION_CHANGED;
+ update_wanted_crc(t, &blue_crcs[t->format].crc);
+ do_assertions(assertions);
+
+ igt_remove_fb(drm.fd, &fullscreen_fb);
+}
/*
* scaledprimary - try different primary plane scaling strategies
@@ -4103,56 +4335,6 @@ static void scaledprimary_subtest(const struct test_mode *t)
igt_remove_fb(drm.fd, &new_fb);
}
-/**
- * SUBTEST: drrs-modesetfrombusy
- * Description: Modeset from a busy buffer to a non-busy buffer with DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-modesetfrombusy
- * Description: Modeset from a busy buffer to a non-busy buffer with FBC
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-modesetfrombusy
- * Description: Modeset from a busy buffer to a non-busy buffer with PSR
- * Driver requirement: i915, xe
- * Functionality: fbt, psr, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-modesetfrombusy
- * Description: Modeset from a busy buffer to a non-busy buffer with FBC & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-modesetfrombusy
- * Description: Modeset from a busy buffer to a non-busy buffer with FBC & PSR
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-modesetfrombusy
- * Description: Modeset from a busy buffer to a non-busy buffer with PSR & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-modesetfrombusy
- * Description: Modeset from a busy buffer to a non-busy buffer with FBC, PSR & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr, scaling
- * Mega feature: General Display Features
- */
-
/**
* modesetfrombusy - modeset from a busy buffer to a non-busy buffer
*
@@ -4196,57 +4378,6 @@ static void modesetfrombusy_subtest(const struct test_mode *t)
igt_remove_fb(drm.fd, &fb2);
}
-/**
- * SUBTEST: drrs-suspend
- * Description: Make sure suspend/resume keeps us on the same state of DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-suspend
- * Description: Make sure suspend/resume keeps us on the same state of FBC
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-suspend
- * Description: Make sure suspend/resume keeps us on the same state of PSR
- * Driver requirement: i915, xe
- * Functionality: fbt, psr, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-suspend
- * Description: Make sure suspend/resume keeps us on the same state of FBC & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-suspend
- * Description: Make sure suspend/resume keeps us on the same state of FBC & PSR
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-suspend
- * Description: Make sure suspend/resume keeps us on the same state of PSR & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbt, psr, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-suspend
- * Description: Make sure suspend/resume keeps us on the same state of FBC, PSR & DRRS
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- */
-
/**
* suspend - make sure suspend/resume keeps us on the same state
*
@@ -4279,57 +4410,6 @@ static void suspend_subtest(const struct test_mode *t)
do_assertions(0);
}
-/**
- * SUBTEST: drrs-farfromfence-mmap-gtt
- * Description: Test drawing as far from the fence start as possible
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbc-farfromfence-mmap-gtt
- * Description: Test drawing as far from the fence start as possible
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psr-farfromfence-mmap-gtt
- * Description: Test drawing as far from the fence start as possible
- * Driver requirement: i915
- * Functionality: fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-farfromfence-mmap-gtt
- * Description: Test drawing as far from the fence start as possible
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-farfromfence-mmap-gtt
- * Description: Test drawing as far from the fence start as possible
- * Driver requirement: i915
- * Functionality: fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: psrdrrs-farfromfence-mmap-gtt
- * Description: Test drawing as far from the fence start as possible
- * Driver requirement: i915
- * Functionality: drrs, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-farfromfence-mmap-gtt
- * Description: Test drawing as far from the fence start as possible
- * Driver requirement: i915
- * Functionality: drrs, fbc, fbt, kms_core, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- */
-
/**
* farfromfence - test drawing as far from the fence start as possible
*
@@ -4403,36 +4483,6 @@ static void farfromfence_subtest(const struct test_mode *t)
igt_remove_fb(drm.fd, &tall_fb);
}
-/**
- * SUBTEST: fbc-stridechange
- * Description: Change the frontbuffer stride by doing a modeset
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-stridechange
- * Description: Change the frontbuffer stride by doing a modeset
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-stridechange
- * Description: Change the frontbuffer stride by doing a modeset
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-stridechange
- * Description: Change the frontbuffer stride by doing a modeset
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr
- * Mega feature: General Display Features
- * Test category: functionality test
- */
-
/**
* stridechange - change the frontbuffer stride by doing a modeset
*
@@ -4497,46 +4547,6 @@ static void stridechange_subtest(const struct test_mode *t)
do_assertions(rc ? 0 : DONT_ASSERT_FBC_STATUS);
}
-/**
- * SUBTEST: fbc-tiling-%s
- * Description: Test %arg[1] formats, if the tiling format supports FBC do the
- * basic drawing test, else set the mode & test if FBC is disabled
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcdrrs-tiling-%s
- * Description: Test %arg[1] formats, if the tiling format supports FBC do the
- * basic drawing test, else set the mode & test if FBC is disabled
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsr-tiling-%s
- * Description: Test %arg[1] formats, if the tiling format supports FBC do the
- * basic drawing test, else set the mode & test if FBC is disabled
- * Driver requirement: i915, xe
- * Functionality: fbc, fbt, psr, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fbcpsrdrrs-tiling-%s
- * Description: Test %arg[1] formats, if the tiling format supports FBC do the
- * basic drawing test, else set the mode & test if FBC is disabled
- * Driver requirement: i915, xe
- * Functionality: drrs, fbc, fbt, psr, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4: 4 tiling
- * @linear: Linear tiling
- * @y: Y tiling
- */
-
/**
* tiling_disable_fbc_subtest - Check if tiling is unsupported by FBC
*
@@ -4586,15 +4596,6 @@ static void tiling_disable_fbc_subtest(const struct test_mode *t)
igt_remove_fb(drm.fd, &new_fb);
}
-/**
- * SUBTEST: basic
- * Description: Do some basic operations regardless of which features are enabled
- * Driver requirement: i915, xe
- * Functionality: fbt
- * Mega feature: General Display Features
- * Test category: functionality test
- */
-
/*
* basic - do some basic operations regardless of which features are enabled
*
diff --git a/tests/intel/kms_legacy_colorkey.c b/tests/intel/kms_legacy_colorkey.c
index 877a6799a..69539f558 100644
--- a/tests/intel/kms_legacy_colorkey.c
+++ b/tests/intel/kms_legacy_colorkey.c
@@ -21,14 +21,16 @@
* IN THE SOFTWARE.
*/
-#include "igt.h"
-#include <errno.h>
-
/**
* TEST: kms legacy colorkey
* Category: Display
* Description: Test to check the legacy set colorkey ioctl on sprite planes.
- *
+ */
+
+#include "igt.h"
+#include <errno.h>
+
+/**
* SUBTEST: basic
* Description: Check that the legacy set colorkey ioctl only works on sprite planes.
* Driver requirement: i915
diff --git a/tests/intel/kms_mmap_write_crc.c b/tests/intel/kms_mmap_write_crc.c
index 17d72ee32..3766d4e9d 100644
--- a/tests/intel/kms_mmap_write_crc.c
+++ b/tests/intel/kms_mmap_write_crc.c
@@ -24,6 +24,13 @@
* Tiago Vignatti <tiago.vignatti at intel.com>
*/
+/**
+ * TEST: kms mmap write crc
+ * Category: Display
+ * Description: Use the display CRC support to validate mmap write to an already
+ * uncached future scanout buffer.
+ */
+
#include <errno.h>
#include <limits.h>
#include <stdbool.h>
@@ -37,12 +44,8 @@
#include "intel_chipset.h"
#include "ioctl_wrappers.h"
#include "igt_aux.h"
+
/**
- * TEST: kms mmap write crc
- * Category: Display
- * Description: Use the display CRC support to validate mmap write to an already
- * uncached future scanout buffer.
- *
* SUBTEST: main
* Description: Tests that caching mode has become UC/WT and flushed using mmap write
* Driver requirement: i915, xe
diff --git a/tests/intel/kms_pipe_b_c_ivb.c b/tests/intel/kms_pipe_b_c_ivb.c
index 386f3003a..c1a1e6610 100644
--- a/tests/intel/kms_pipe_b_c_ivb.c
+++ b/tests/intel/kms_pipe_b_c_ivb.c
@@ -24,13 +24,16 @@
* Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
*/
-#include "igt.h"
/**
* TEST: kms pipe b c ivb
* Category: Display
* Description: Exercise the FDI lane bifurcation code for IVB in the kernel by
* setting different combinations of modes for pipes B and C.
- *
+ */
+
+#include "igt.h"
+
+/**
* SUBTEST: disable-pipe-B-enable-pipe-C
* Description: Tests pipe-B and pipe-C interactions in IVB by disabling pipe-B
* and then setting mode on pipe-C.
diff --git a/tests/intel/kms_pm_backlight.c b/tests/intel/kms_pm_backlight.c
index f6e7db0b2..68f4dc3d1 100644
--- a/tests/intel/kms_pm_backlight.c
+++ b/tests/intel/kms_pm_backlight.c
@@ -25,6 +25,12 @@
*
*/
+/**
+ * TEST: kms pm backlight
+ * Category: Display
+ * Description: Basic backlight sysfs test
+ */
+
#include "igt.h"
#include <limits.h>
#include <sys/types.h>
@@ -36,11 +42,8 @@
#include <time.h>
#include "igt_device.h"
#include "igt_device_scan.h"
+
/**
- * TEST: kms pm backlight
- * Category: Display
- * Description: Basic backlight sysfs test
- *
* SUBTEST: bad-brightness
* Description: Test the bad brightness.
* Driver requirement: i915, xe
diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index 1e9ca5d6c..3507bdd60 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -22,6 +22,12 @@
*
*/
+/**
+ * TEST: kms pm dc
+ * Category: Display
+ * Description: Tests to validate display power DC states.
+ */
+
#include <errno.h>
#include <fcntl.h>
#include <stdbool.h>
@@ -39,10 +45,6 @@
#include "xe/xe_query.h"
/**
- * TEST: kms pm dc
- * Category: Display
- * Description: Tests to validate display power DC states.
- *
* SUBTEST: dc3co-vpb-simulation
* Description: Make sure that system enters DC3CO when PSR2 is active and system
* is in SLEEP state
diff --git a/tests/intel/kms_pm_lpsp.c b/tests/intel/kms_pm_lpsp.c
index cb3c3e379..23940fd9b 100644
--- a/tests/intel/kms_pm_lpsp.c
+++ b/tests/intel/kms_pm_lpsp.c
@@ -24,6 +24,12 @@
*
*/
+/**
+ * TEST: kms pm lpsp
+ * Description: These tests validates display Low Power Single Pipe configurations
+ * Category: Display
+ */
+
#include "igt.h"
#include "igt_kmod.h"
#include "igt_pm.h"
@@ -32,11 +38,8 @@
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
+
/**
- * TEST: kms pm lpsp
- * Description: These tests validates display Low Power Single Pipe configurations
- * Category: Display
- *
* SUBTEST: kms-lpsp
* Description: This test validates lpsp on all connected outputs on low power pipes
* Driver requirement: i915, xe
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index ffecc5222..fb7ca6926 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -229,6 +229,32 @@
* @plane_move: Move plane position
*/
+/**
+ * SUBTEST: cursor_plane_move
+ * Description: Check if psr is detecting the plane operations performed on
+ * cursor planes
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: psr
+ * Mega feature: PSR
+ *
+ * SUBTEST: primary_page_flip
+ * Description: Check if psr is detecting page-flipping operations performed
+ * on primary planes
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: psr
+ * Mega feature: PSR
+ *
+ * SUBTEST: sprite_plane_onoff
+ * Description: Check if psr is detecting the plane operations performed on
+ * sprite planes
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: psr
+ * Mega feature: PSR
+ */
+
enum operations {
PAGE_FLIP,
MMAP_GTT,
@@ -501,32 +527,6 @@ static void fb_dirty_fb_ioctl(data_t *data, struct igt_fb *fb)
igt_assert(ret == 0 || ret == -ENOSYS);
}
-/**
- * SUBTEST: cursor_plane_move
- * Description: Check if psr is detecting the plane operations performed on
- * cursor planes
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: psr
- * Mega feature: PSR
- *
- * SUBTEST: primary_page_flip
- * Description: Check if psr is detecting page-flipping operations performed
- * on primary planes
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: psr
- * Mega feature: PSR
- *
- * SUBTEST: sprite_plane_onoff
- * Description: Check if psr is detecting the plane operations performed on
- * sprite planes
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: psr
- * Mega feature: PSR
- */
-
static void run_test(data_t *data)
{
uint32_t handle = data->fb_white.gem_handle;
diff --git a/tests/intel/kms_psr2_sf.c b/tests/intel/kms_psr2_sf.c
index d7a746211..4f5160abe 100644
--- a/tests/intel/kms_psr2_sf.c
+++ b/tests/intel/kms_psr2_sf.c
@@ -22,6 +22,13 @@
*
*/
+/**
+ * TEST: kms psr2 sf
+ * Category: Display
+ * Description: Tests to varify PSR2 selective fetch by sending multiple damaged
+ * areas
+ */
+
#include "igt.h"
#include "igt_sysfs.h"
#include "igt_psr.h"
@@ -30,12 +37,8 @@
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
+
/**
- * TEST: kms psr2 sf
- * Category: Display
- * Description: Tests to varify PSR2 selective fetch by sending multiple damaged
- * areas
- *
* SUBTEST: %s-plane-move-continuous-%s
* Description: Test that selective fetch works on moving %arg[1] plane %arg[2]
* visible area (no update)
diff --git a/tests/intel/kms_psr2_su.c b/tests/intel/kms_psr2_su.c
index 834fec1ec..1c65b0826 100644
--- a/tests/intel/kms_psr2_su.c
+++ b/tests/intel/kms_psr2_su.c
@@ -22,6 +22,12 @@
*
*/
+/**
+ * TEST: kms psr2 su
+ * Category: Display
+ * Description: Test PSR2 selective update
+ */
+
#include "igt.h"
#include "igt_sysfs.h"
#include "igt_psr.h"
@@ -30,11 +36,8 @@
#include <stdio.h>
#include <string.h>
#include <sys/timerfd.h>
+
/**
- * TEST: kms psr2 su
- * Category: Display
- * Description: Test PSR2 selective update
- *
* SUBTEST: frontbuffer-XRGB8888
* Description: Test that selective update works when screen changes
* Driver requirement: i915, xe
diff --git a/tests/intel/kms_psr_stress_test.c b/tests/intel/kms_psr_stress_test.c
index b6759eece..f1f9607f0 100644
--- a/tests/intel/kms_psr_stress_test.c
+++ b/tests/intel/kms_psr_stress_test.c
@@ -1,3 +1,9 @@
+
+/**
+ * TEST: kms psr stress test
+ * Category: Display
+ */
+
#include "igt.h"
#include "igt_sysfs.h"
#include "igt_psr.h"
@@ -7,10 +13,8 @@
#include <stdio.h>
#include <string.h>
#include <sys/timerfd.h>
+
/**
- * TEST: kms psr stress test
- * Category: Display
- *
* SUBTEST: flip-primary-invalidate-overlay
* Description: Mix page flips in primary plane and frontbuffer writes to overlay
* plane and check for warnings, underruns or PSR state changes
diff --git a/tests/intel/kms_pwrite_crc.c b/tests/intel/kms_pwrite_crc.c
index 50df18aa3..945f93f37 100644
--- a/tests/intel/kms_pwrite_crc.c
+++ b/tests/intel/kms_pwrite_crc.c
@@ -22,6 +22,12 @@
*
*/
+/**
+ * TEST: kms pwrite crc
+ * Category: Display
+ * Description: Test to validate pwrite buffer using the display CRC
+ */
+
#include "igt.h"
#include <errno.h>
#include <limits.h>
@@ -30,10 +36,6 @@
#include <string.h>
/**
- * TEST: kms pwrite crc
- * Category: Display
- * Description: Test to validate pwrite buffer using the display CRC
- *
* SUBTEST:
* Description: Use the display CRC support to validate pwrite to an already
* uncached future scanout buffer.
diff --git a/tests/kms_3d.c b/tests/kms_3d.c
index fa73d0cc6..ad6c45e9b 100644
--- a/tests/kms_3d.c
+++ b/tests/kms_3d.c
@@ -22,13 +22,16 @@
*
*/
-#include "igt.h"
-#include "xe/xe_query.h"
/**
* TEST: kms 3d
* Category: Display
* Description: Tests 3D mode setting.
- *
+ */
+
+#include "igt.h"
+#include "xe/xe_query.h"
+
+/**
* SUBTEST:
* Description: Tests 3D mode setting.
* Driver requirement: i915, xe
diff --git a/tests/kms_addfb_basic.c b/tests/kms_addfb_basic.c
index fc16b8814..9f8bf4275 100644
--- a/tests/kms_addfb_basic.c
+++ b/tests/kms_addfb_basic.c
@@ -50,22 +50,6 @@
#include "xe/xe_ioctl.h"
#include "xe/xe_query.h"
-static uint32_t gem_bo;
-static uint32_t gem_bo_small;
-static igt_display_t display;
-
-static int legacy_addfb(int fd, struct drm_mode_fb_cmd *arg)
-{
- int err;
-
- err = 0;
- if (igt_ioctl(fd, DRM_IOCTL_MODE_ADDFB, arg))
- err = -errno;
-
- errno = 0;
- return err;
-}
-
/**
* SUBTEST: unused-%s
* Description: Test that addfb2 call fails correctly for unused %arg[1]
@@ -109,6 +93,216 @@ static int legacy_addfb(int fd, struct drm_mode_fb_cmd *arg)
* @pitches: Pitches
* @offsets: Offsets
*/
+
+/**
+ * SUBTEST: no-handle
+ * Description: Test that addfb2 call fails correctly without handle
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: basic
+ * Description: Check if addfb2 call works with given handle
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: bad-pitch-%i
+ * Description: bad-pitch-%arg[1]: Test that addfb2 call fails correctly for bad-pitches
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * arg[1].values: 0, 32, 63, 128, 256, 999, 1024, 65536
+ */
+
+/**
+ * SUBTEST: basic-%s-tiled-legacy
+ * Description: Check if addfb2 and rmfb call works for basic %arg[1] test
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: framebuffer-vs-set-tiling
+ * Description: Check if addfb2 call works for x and y tiling
+ * Driver requirement: i915
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: tile-pitch-mismatch
+ * Description: Test that addfb2 call fails correctly for pitches mismatch
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ *
+ * arg[1]:
+ *
+ * @x: x-tiling
+ * @y: y-tiling
+ */
+
+/**
+ * SUBTEST: size-max
+ * Description: Check if addfb2 call works with max size of buffer object
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: too-wide
+ * Description: Test that addfb2 call fails correctly with increased width of fb
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: too-high
+ * Description: Test that addfb2 call fails correctly with increased height of fb
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: bo-too-small
+ * Description: Test that addfb2 call fails correctly with small size of buffer object
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: small-bo
+ * Description: Check if addfb2 call works for given height
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: bo-too-small-due-to-tiling
+ * Description: Test that addfb2 call fails correctly with small buffer object
+ * after changing tile
+ * Driver requirement: i915
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ */
+
+/**
+ * SUBTEST: addfb25-modifier-no-flag
+ * Description: Test that addfb2 call fails correctly for x-tiling with given modifier
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: addfb25-bad-modifier
+ * Description: Test that addfb2 call fails correctly for irrelevant modifier
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: addfb25-x-tiled-mismatch-legacy
+ * Description: Test that addfb2 call fails correctly for irrelevant x-tiling
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: addfb25-x-tiled-legacy
+ * Description: Check if addfb2 call works for x-tiling
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: addfb25-framebuffer-vs-set-tiling
+ * Description: Check if addfb2 call works for relevant combination of tiling and fbs
+ * Driver requirement: i915
+ * Test category: functionality test
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ */
+
+/**
+ * SUBTEST: addfb25-y-tiled-%s
+ * Description: Check if addfb2 call works for y-tiling %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: addfb25-yf-tiled-legacy
+ * Description: Check if addfb2 call works for yf-tiling
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @legacy: with default size
+ * @small-legacy: with given size & modifier
+ */
+
+/**
+ * SUBTEST: addfb25-4-tiled
+ * Description: Check if addfb2 call works for tiling-4
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
+/**
+ * SUBTEST: invalid-%s-%s
+ * Description: Test that %arg[1] ioctl call fails correctly for %arg[2] object
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ *
+ * arg[1]:
+ *
+ * @get: get-properties
+ * @set: set-properties
+ *
+ * arg[2]:
+ *
+ * @prop: fb mode
+ * @prop-any: invalid
+ */
+
+/**
+ * SUBTEST: master-rmfb
+ * Description: Check that only master can rmfb
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
+static uint32_t gem_bo;
+static uint32_t gem_bo_small;
+static igt_display_t display;
+
+static int legacy_addfb(int fd, struct drm_mode_fb_cmd *arg)
+{
+ int err;
+
+ err = 0;
+ if (igt_ioctl(fd, DRM_IOCTL_MODE_ADDFB, arg))
+ err = -errno;
+
+ errno = 0;
+ return err;
+}
+
static void invalid_tests(int fd)
{
struct drm_mode_fb_cmd2 f = {};
@@ -322,30 +516,6 @@ static void invalid_tests(int fd)
}
}
-/**
- * SUBTEST: no-handle
- * Description: Test that addfb2 call fails correctly without handle
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * SUBTEST: basic
- * Description: Check if addfb2 call works with given handle
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * SUBTEST: bad-pitch-%i
- * Description: bad-pitch-%arg[1]: Test that addfb2 call fails correctly for bad-pitches
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * arg[1].values: 0, 32, 63, 128, 256, 999, 1024, 65536
- */
static void pitch_tests(int fd)
{
struct drm_mode_fb_cmd2 f = {};
@@ -393,33 +563,6 @@ static void pitch_tests(int fd)
gem_close(fd, gem_bo);
}
-/**
- * SUBTEST: basic-%s-tiled-legacy
- * Description: Check if addfb2 and rmfb call works for basic %arg[1] test
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- *
- * SUBTEST: framebuffer-vs-set-tiling
- * Description: Check if addfb2 call works for x and y tiling
- * Driver requirement: i915
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- *
- * SUBTEST: tile-pitch-mismatch
- * Description: Test that addfb2 call fails correctly for pitches mismatch
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- *
- * arg[1]:
- *
- * @x: x-tiling
- * @y: y-tiling
- */
static void tiling_tests(int fd)
{
struct drm_mode_fb_cmd2 f = {};
@@ -506,50 +649,6 @@ static void tiling_tests(int fd)
}
}
-/**
- * SUBTEST: size-max
- * Description: Check if addfb2 call works with max size of buffer object
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * SUBTEST: too-wide
- * Description: Test that addfb2 call fails correctly with increased width of fb
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * SUBTEST: too-high
- * Description: Test that addfb2 call fails correctly with increased height of fb
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * SUBTEST: bo-too-small
- * Description: Test that addfb2 call fails correctly with small size of buffer object
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * SUBTEST: small-bo
- * Description: Check if addfb2 call works for given height
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * SUBTEST: bo-too-small-due-to-tiling
- * Description: Test that addfb2 call fails correctly with small buffer object
- * after changing tile
- * Driver requirement: i915
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- */
static void size_tests(int fd)
{
struct drm_mode_fb_cmd2 f = {};
@@ -665,42 +764,6 @@ static void size_tests(int fd)
}
}
-/**
- * SUBTEST: addfb25-modifier-no-flag
- * Description: Test that addfb2 call fails correctly for x-tiling with given modifier
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- *
- * SUBTEST: addfb25-bad-modifier
- * Description: Test that addfb2 call fails correctly for irrelevant modifier
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- *
- * SUBTEST: addfb25-x-tiled-mismatch-legacy
- * Description: Test that addfb2 call fails correctly for irrelevant x-tiling
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- *
- * SUBTEST: addfb25-x-tiled-legacy
- * Description: Check if addfb2 call works for x-tiling
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- *
- * SUBTEST: addfb25-framebuffer-vs-set-tiling
- * Description: Check if addfb2 call works for relevant combination of tiling and fbs
- * Driver requirement: i915
- * Test category: functionality test
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- */
static void addfb25_tests(int fd)
{
struct drm_mode_fb_cmd2 f = {};
@@ -786,26 +849,6 @@ static int addfb_expected_ret(igt_display_t *disp, struct drm_mode_fb_cmd2 *f)
f->modifier[0]) ? 0 : -1;
}
-/**
- * SUBTEST: addfb25-y-tiled-%s
- * Description: Check if addfb2 call works for y-tiling %arg[1]
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: addfb25-yf-tiled-legacy
- * Description: Check if addfb2 call works for yf-tiling
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @legacy: with default size
- * @small-legacy: with given size & modifier
- */
static void addfb25_ytile(int fd)
{
struct drm_mode_fb_cmd2 f = {};
@@ -872,14 +915,6 @@ static void addfb25_ytile(int fd)
}
}
-/**
- * SUBTEST: addfb25-4-tiled
- * Description: Check if addfb2 call works for tiling-4
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void addfb25_4tile(int fd)
{
struct drm_mode_fb_cmd2 f = {};
@@ -918,24 +953,6 @@ static void addfb25_4tile(int fd)
gem_close(fd, gem_bo);
}
-/**
- * SUBTEST: invalid-%s-%s
- * Description: Test that %arg[1] ioctl call fails correctly for %arg[2] object
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- *
- * arg[1]:
- *
- * @get: get-properties
- * @set: set-properties
- *
- * arg[2]:
- *
- * @prop: fb mode
- * @prop-any: invalid
- */
static void prop_tests(int fd)
{
struct drm_mode_fb_cmd2 f = {};
@@ -1001,14 +1018,6 @@ static void prop_tests(int fd)
}
}
-/**
- * SUBTEST: master-rmfb
- * Description: Check that only master can rmfb
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void master_tests(int fd)
{
struct drm_mode_fb_cmd2 f = {};
diff --git a/tests/kms_async_flips.c b/tests/kms_async_flips.c
index 6c97558be..90337d0df 100644
--- a/tests/kms_async_flips.c
+++ b/tests/kms_async_flips.c
@@ -30,6 +30,7 @@
* Category: Display
* Description: Test asynchronous page flips.
*/
+
#include "igt.h"
#include "igt_aux.h"
#include "igt_psr.h"
@@ -37,6 +38,54 @@
#include <sys/time.h>
#include <poll.h>
+/**
+ * SUBTEST: alternate-sync-async-flip
+ * Description: Verify the async flip functionality and the fps during async flips
+ * Alternate between sync and async flips
+ * Driver requirement: i915, xe
+ * Functionality: async_flips, vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: async-flip-with-page-flip-events
+ * Description: Verify the async flip functionality and the fps during async flips
+ * Wait for page flip events in between successive asynchronous flips
+ * Driver requirement: i915, xe
+ * Functionality: async_flips, vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: test-time-stamp
+ * Description: Verify the async flip functionality and the fps during async flips
+ * Verify that the async flip timestamp does not coincide with either
+ * previous or next vblank
+ * Driver requirement: i915, xe
+ * Functionality: async_flips, vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: test-cursor
+ * Description: Verify that the DRM_IOCTL_MODE_CURSOR passes after async flip
+ * Driver requirement: i915, xe
+ * Functionality: async_flips, cursor, vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: crc
+ * Description: Use CRC to verify async flip scans out the correct framebuffer
+ * Driver requirement: i915, xe
+ * Functionality: async_flips, crc, vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: invalid-async-flip
+ * Description: Negative case to verify if changes in fb are rejected from kernel as expected
+ * Driver requirement: i915, xe
+ * Functionality: async_flips, vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
#define CURSOR_POS 128
/*
@@ -203,23 +252,6 @@ static void test_init_fbs(data_t *data)
igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
}
-/**
- * SUBTEST: alternate-sync-async-flip
- * Description: Verify the async flip functionality and the fps during async flips
- * Alternate between sync and async flips
- * Driver requirement: i915, xe
- * Functionality: async_flips, vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: async-flip-with-page-flip-events
- * Description: Verify the async flip functionality and the fps during async flips
- * Wait for page flip events in between successive asynchronous flips
- * Driver requirement: i915, xe
- * Functionality: async_flips, vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_async_flip(data_t *data)
{
int ret, frame;
@@ -315,16 +347,6 @@ static void wait_for_vblank(data_t *data, unsigned long *vbl_time, unsigned int
*seq = wait_vbl.reply.sequence;
}
-/**
- * SUBTEST: test-time-stamp
- * Description: Verify the async flip functionality and the fps during async flips
- * Verify that the async flip timestamp does not coincide with either
- * previous or next vblank
- * Driver requirement: i915, xe
- * Functionality: async_flips, vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_timestamp(data_t *data)
{
int flags = DRM_MODE_PAGE_FLIP_ASYNC | DRM_MODE_PAGE_FLIP_EVENT;
@@ -369,14 +391,6 @@ static void test_timestamp(data_t *data)
"Async flip time stamp is expected to be in between 2 vblank time stamps\n");
}
-/**
- * SUBTEST: test-cursor
- * Description: Verify that the DRM_IOCTL_MODE_CURSOR passes after async flip
- * Driver requirement: i915, xe
- * Functionality: async_flips, cursor, vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_cursor(data_t *data)
{
int flags = DRM_MODE_PAGE_FLIP_ASYNC | DRM_MODE_PAGE_FLIP_EVENT;
@@ -529,14 +543,6 @@ static unsigned int clock_ms(void)
return ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
}
-/**
- * SUBTEST: crc
- * Description: Use CRC to verify async flip scans out the correct framebuffer
- * Driver requirement: i915, xe
- * Functionality: async_flips, crc, vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_crc(data_t *data)
{
unsigned int frame = 0;
@@ -599,14 +605,6 @@ static void test_crc(data_t *data)
igt_assert_lt(data->frame_count * 2, data->flip_count);
}
-/**
- * SUBTEST: invalid-async-flip
- * Description: Negative case to verify if changes in fb are rejected from kernel as expected
- * Driver requirement: i915, xe
- * Functionality: async_flips, vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void run_test(data_t *data, void (*test)(data_t *))
{
igt_display_t *display = &data->display;
diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
index c7190c6bd..c13a22234 100644
--- a/tests/kms_atomic.c
+++ b/tests/kms_atomic.c
@@ -48,6 +48,94 @@
#include "igt_aux.h"
#include "sw_sync.h"
+/**
+ * SUBTEST: plane-primary-overlay-mutable-zpos
+ * Description: Verify that the overlay plane can cover the primary one (and
+ * vice versa) by changing their zpos property.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-immutable-zpos
+ * Description: Verify the reported zpos property of planes by making sure only
+ * higher zpos planes cover the lower zpos ones.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-%s-legacy
+ * Description: Test for KMS atomic modesetting on %arg[1] and ensure coherency
+ * between legacy and atomic interfaces.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @cursor: Cursor plane
+ * @overlay: Overlay plane
+ * @primary: Primary plane
+ */
+
+/**
+ * SUBTEST: test-only
+ * Description: Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches
+ * the free-standing state objects and nothing else.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
+/**
+ * SUBTEST: plane-invalid-%s
+ * Description: Test error handling when invalid %arg[1] are passed
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @params: plane parameters
+ * @params-fence: plane fence parameters
+ */
+
+/**
+ * SUBTEST: crtc-invalid-%s
+ * Description: Test error handling when invalid %arg[1] are passed
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @params: crtc parameters
+ * @params-fence: crtc fence parameters
+ */
+
+/**
+ * SUBTEST: atomic-invalid-params
+ * Description: Test abuse the atomic ioctl directly in order to test various
+ * invalid conditions which the libdrm wrapper won't allow us to
+ * create.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: atomic-plane-damage
+ * Description: Simple test cases to use FB_DAMAGE_CLIPS plane property
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
#ifndef DRM_CAP_CURSOR_WIDTH
#define DRM_CAP_CURSOR_WIDTH 0x8
#endif
@@ -302,15 +390,6 @@ static uint32_t plane_get_igt_format(igt_plane_t *plane)
return 0;
}
-/**
- * SUBTEST: plane-primary-overlay-mutable-zpos
- * Description: Verify that the overlay plane can cover the primary one (and
- * vice versa) by changing their zpos property.
- * Driver requirement: i915, xe
- * Functionality: kms_core, plane
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void
plane_primary_overlay_mutable_zpos(data_t *data, igt_output_t *output, igt_plane_t *overlay,
uint32_t format_primary, uint32_t format_overlay)
@@ -392,15 +471,6 @@ plane_primary_overlay_mutable_zpos(data_t *data, igt_output_t *output, igt_plane
igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 1);
}
-/**
- * SUBTEST: plane-immutable-zpos
- * Description: Verify the reported zpos property of planes by making sure only
- * higher zpos planes cover the lower zpos ones.
- * Driver requirement: i915, xe
- * Functionality: kms_core, plane
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void
plane_immutable_zpos(data_t *data, igt_output_t *output, enum pipe pipe, int n_planes)
{
@@ -530,21 +600,6 @@ plane_immutable_zpos(data_t *data, igt_output_t *output, enum pipe pipe, int n_p
igt_remove_fb(data->drm_fd, &fb_upper);
}
-/**
- * SUBTEST: plane-%s-legacy
- * Description: Test for KMS atomic modesetting on %arg[1] and ensure coherency
- * between legacy and atomic interfaces.
- * Driver requirement: i915, xe
- * Functionality: kms_core, plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @cursor: Cursor plane
- * @overlay: Overlay plane
- * @primary: Primary plane
- */
static void plane_overlay(data_t *data, igt_output_t *output, igt_plane_t *plane,
uint32_t format)
{
@@ -631,16 +686,6 @@ static void plane_primary(data_t *data)
plane_commit(data->primary, COMMIT_UNIVERSAL, ATOMIC_RELAX_NONE);
}
-/**
- * SUBTEST: test-only
- * Description: Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches
- * the free-standing state objects and nothing else.
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- */
-
/*
* Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches the
* free-standing state objects and nothing else.
@@ -749,19 +794,6 @@ static void plane_cursor(data_t *data, igt_output_t *output, igt_plane_t *cursor
plane_commit(cursor, COMMIT_LEGACY, ATOMIC_RELAX_NONE);
}
-/**
- * SUBTEST: plane-invalid-%s
- * Description: Test error handling when invalid %arg[1] are passed
- * Driver requirement: i915, xe
- * Functionality: kms_core, plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @params: plane parameters
- * @params-fence: plane fence parameters
- */
static void plane_invalid_params(data_t *data, igt_output_t *output)
{
struct igt_fb fb2;
@@ -846,19 +878,6 @@ static void plane_invalid_params_fence(data_t *data, igt_output_t *output)
close(timeline);
}
-/**
- * SUBTEST: crtc-invalid-%s
- * Description: Test error handling when invalid %arg[1] are passed
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @params: crtc parameters
- * @params-fence: crtc fence parameters
- */
static void crtc_invalid_params(data_t *data, igt_output_t *output)
{
uint64_t old_mode_id = data->pipe->values[IGT_CRTC_MODE_ID];
@@ -999,17 +1018,6 @@ static void crtc_invalid_params_fence(data_t *data, igt_output_t *output)
igt_assert(data->pipe->out_fence_fd != -1);
}
-/**
- * SUBTEST: atomic-invalid-params
- * Description: Test abuse the atomic ioctl directly in order to test various
- * invalid conditions which the libdrm wrapper won't allow us to
- * create.
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- */
-
/*
* Abuse the atomic ioctl directly in order to test various invalid conditions,
* which the libdrm wrapper won't allow us to create.
@@ -1148,14 +1156,6 @@ static void atomic_invalid_params(data_t *data, igt_output_t *output)
do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
}
-/**
- * SUBTEST: atomic-plane-damage
- * Description: Simple test cases to use FB_DAMAGE_CLIPS plane property
- * Driver requirement: i915, xe
- * Functionality: kms_core, plane
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void atomic_plane_damage(data_t *data)
{
struct drm_mode_rect damage[2];
diff --git a/tests/kms_atomic_interruptible.c b/tests/kms_atomic_interruptible.c
index 1a104106a..4fd6e0700 100644
--- a/tests/kms_atomic_interruptible.c
+++ b/tests/kms_atomic_interruptible.c
@@ -26,59 +26,13 @@
* Category: Display
* Description: Tests that interrupt various atomic ioctls.
*/
+
#include <signal.h>
#include "igt.h"
#include "drmtest.h"
#include "sw_sync.h"
-IGT_TEST_DESCRIPTION("Tests that interrupt various atomic ioctls.");
-
-enum plane_test_type
-{
- test_legacy_modeset,
- test_atomic_modeset,
- test_legacy_dpms,
- test_setplane,
- test_setcursor,
- test_pageflip
-};
-
-static int block_plane(igt_display_t *display, igt_output_t *output, enum plane_test_type test_type, igt_plane_t *plane)
-{
- int timeline = sw_sync_timeline_create();
-
- igt_fork(child, 1) {
- /* Ignore the signal helper, we need to block indefinitely on the fence. */
- signal(SIGCONT, SIG_IGN);
-
- if (test_type == test_legacy_modeset || test_type == test_atomic_modeset) {
- igt_output_set_pipe(output, PIPE_NONE);
- }
- igt_plane_set_fence_fd(plane, sw_sync_timeline_create_fence(timeline, 1));
-
- igt_display_commit2(display, COMMIT_ATOMIC);
- }
-
- return timeline;
-}
-
-static void unblock(int block)
-{
- sw_sync_timeline_inc(block, 1);
- close(block);
-}
-
-static void ev_page_flip(int fd, unsigned seq, unsigned tv_sec, unsigned tv_usec, void *user_data)
-{
- igt_debug("Retrieved vblank seq: %u on unk\n", seq);
-}
-
-static drmEventContext drm_events = {
- .version = 2,
- .page_flip_handler = ev_page_flip
-};
-
/**
* SUBTEST: %s-setmode
* Description: Tests the interrupt properties of %arg[1] modeset
@@ -114,9 +68,7 @@ static drmEventContext drm_events = {
* Functionality: kms_core
* Mega feature: General Display Features
* Test category: functionality test
- */
-
-/**
+ *
* SUBTEST: universal-setplane-%s
* Description: Tests the interrupt properties for %arg[1]
* Driver requirement: i915, xe
@@ -129,6 +81,54 @@ static drmEventContext drm_events = {
* @cursor: Cursor plane
* @primary: Primary plane
*/
+
+IGT_TEST_DESCRIPTION("Tests that interrupt various atomic ioctls.");
+
+enum plane_test_type
+{
+ test_legacy_modeset,
+ test_atomic_modeset,
+ test_legacy_dpms,
+ test_setplane,
+ test_setcursor,
+ test_pageflip
+};
+
+static int block_plane(igt_display_t *display, igt_output_t *output, enum plane_test_type test_type, igt_plane_t *plane)
+{
+ int timeline = sw_sync_timeline_create();
+
+ igt_fork(child, 1) {
+ /* Ignore the signal helper, we need to block indefinitely on the fence. */
+ signal(SIGCONT, SIG_IGN);
+
+ if (test_type == test_legacy_modeset || test_type == test_atomic_modeset) {
+ igt_output_set_pipe(output, PIPE_NONE);
+ }
+ igt_plane_set_fence_fd(plane, sw_sync_timeline_create_fence(timeline, 1));
+
+ igt_display_commit2(display, COMMIT_ATOMIC);
+ }
+
+ return timeline;
+}
+
+static void unblock(int block)
+{
+ sw_sync_timeline_inc(block, 1);
+ close(block);
+}
+
+static void ev_page_flip(int fd, unsigned seq, unsigned tv_sec, unsigned tv_usec, void *user_data)
+{
+ igt_debug("Retrieved vblank seq: %u on unk\n", seq);
+}
+
+static drmEventContext drm_events = {
+ .version = 2,
+ .page_flip_handler = ev_page_flip
+};
+
static void run_plane_test(igt_display_t *display, enum pipe pipe, igt_output_t *output,
enum plane_test_type test_type, unsigned plane_type)
{
diff --git a/tests/kms_atomic_transition.c b/tests/kms_atomic_transition.c
index f5f21f925..1cec0f764 100644
--- a/tests/kms_atomic_transition.c
+++ b/tests/kms_atomic_transition.c
@@ -25,6 +25,7 @@
* TEST: kms atomic transition
* Category: Display
*/
+
#include "igt.h"
#include "igt_rand.h"
#include "drmtest.h"
@@ -37,6 +38,95 @@
#include <time.h>
#include <poll.h>
+/**
+ * SUBTEST: plane-primary-toggle-with-vblank-wait
+ * Description: Check toggling of primary plane with vblank
+ * Driver requirement: i915, xe
+ * Functionality: plane, vblank, watermark
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-all-modeset-%s
+ * Description: Modeset test for all plane combinations %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: plane, watermark
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @transition: default
+ * @transition-fencing: with fencing commit
+ */
+
+/**
+ * SUBTEST: plane-all-modeset-%s
+ * Description: Modeset test for all plane combinations %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: plane, watermark
+ * Mega feature: eDP
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @transition-fencing-internal-panels: on internal panels with fencing commit
+ * @transition-internal-panels: on internal panels
+ */
+
+/**
+ * SUBTEST: plane-all-%s
+ * Description: Transition test for all plane combinations %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: plane, watermark
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @transition: default
+ * @transition-fencing: with fencing commit
+ * @transition-nonblocking: with non-blocking commit
+ * @transition-nonblocking-fencing: with non-blocking & fencing commit
+ */
+
+/**
+ * SUBTEST: plane-toggle-modeset-transition
+ * Description: Check toggling and modeset transition on plane
+ * Driver requirement: i915, xe
+ * Functionality: plane, watermark
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-use-after-nonblocking-%s
+ * Description: Transition test with non %arg[1] and make sure commit of disabled
+ * plane has to complete before atomic commit on that plane
+ * Driver requirement: i915, xe
+ * Functionality: plane, watermark
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @unbind: blocking commit
+ * @unbind-fencing: blocking commit with fencing
+ */
+
+/**
+ * SUBTEST: modeset-%s
+ * Description: Modeset transition tests for combinations of %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: plane, watermark
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @transition: crtc enabled
+ * @transition-fencing: crtc enabled with fencing commit
+ * @transition-nonblocking: crtc enabled with nonblocking commit
+ * @transition-nonblocking-fencing: crtc enabled with nonblocking & fencing commit
+ */
+
#ifndef DRM_CAP_CURSOR_WIDTH
#define DRM_CAP_CURSOR_WIDTH 0x8
#endif
@@ -62,14 +152,6 @@ int *timeline;
pthread_t *thread;
int *seqno;
-/**
- * SUBTEST: plane-primary-toggle-with-vblank-wait
- * Description: Check toggling of primary plane with vblank
- * Driver requirement: i915, xe
- * Functionality: plane, vblank, watermark
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void
run_primary_test(data_t *data, enum pipe pipe, igt_output_t *output)
{
@@ -482,72 +564,6 @@ static void wait_for_transition(data_t *data, enum pipe pipe, bool nonblocking,
}
}
-/**
- * SUBTEST: plane-all-modeset-%s
- * Description: Modeset test for all plane combinations %arg[1]
- * Driver requirement: i915, xe
- * Functionality: plane, watermark
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @transition: default
- * @transition-fencing: with fencing commit
- */
-
-/**
- * SUBTEST: plane-all-modeset-%s
- * Description: Modeset test for all plane combinations %arg[1]
- * Driver requirement: i915, xe
- * Functionality: plane, watermark
- * Mega feature: eDP
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @transition-fencing-internal-panels: on internal panels with fencing commit
- * @transition-internal-panels: on internal panels
- */
-
-/**
- * SUBTEST: plane-all-%s
- * Description: Transition test for all plane combinations %arg[1]
- * Driver requirement: i915, xe
- * Functionality: plane, watermark
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @transition: default
- * @transition-fencing: with fencing commit
- * @transition-nonblocking: with non-blocking commit
- * @transition-nonblocking-fencing: with non-blocking & fencing commit
- */
-
-/**
- * SUBTEST: plane-toggle-modeset-transition
- * Description: Check toggling and modeset transition on plane
- * Driver requirement: i915, xe
- * Functionality: plane, watermark
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-use-after-nonblocking-%s
- * Description: Transition test with non %arg[1] and make sure commit of disabled
- * plane has to complete before atomic commit on that plane
- * Driver requirement: i915, xe
- * Functionality: plane, watermark
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @unbind: blocking commit
- * @unbind-fencing: blocking commit with fencing
- */
-
/*
* 1. Set primary plane to a known fb.
* 2. Make sure getcrtc returns the correct fb id.
@@ -1041,21 +1057,6 @@ retry:
}
}
-/**
- * SUBTEST: modeset-%s
- * Description: Modeset transition tests for combinations of %arg[1]
- * Driver requirement: i915, xe
- * Functionality: plane, watermark
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @transition: crtc enabled
- * @transition-fencing: crtc enabled with fencing commit
- * @transition-nonblocking: crtc enabled with nonblocking commit
- * @transition-nonblocking-fencing: crtc enabled with nonblocking & fencing commit
- */
static void run_modeset_transition(data_t *data, int requested_outputs, bool nonblocking, bool fencing)
{
igt_output_t *outputs[IGT_MAX_PIPES] = {};
diff --git a/tests/kms_bw.c b/tests/kms_bw.c
index 5f9a020da..e00d65cdb 100644
--- a/tests/kms_bw.c
+++ b/tests/kms_bw.c
@@ -20,16 +20,19 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+/**
+ * TEST: kms bw
+ * Category: Display
+ * Description: BW test with different resolutions
+ */
+
#include "drm_mode.h"
#include "igt.h"
#include "drm.h"
#include <stdio.h>
#include <xf86drmMode.h>
+
/**
- * TEST: kms bw
- * Category: Display
- * Description: BW test with different resolutions
- *
* SUBTEST: linear-tiling-%d-displays-%s
* Description: bw test with %arg[2]
* Driver requirement: i915, xe
diff --git a/tests/kms_color.c b/tests/kms_color.c
index f59feabd4..119dfc1f4 100644
--- a/tests/kms_color.c
+++ b/tests/kms_color.c
@@ -27,9 +27,8 @@
* Category: Display
* Description: Test Color Features at Pipe level
*/
-#include "kms_color_helper.h"
-IGT_TEST_DESCRIPTION("Test Color Features at Pipe level");
+#include "kms_color_helper.h"
/**
* SUBTEST: degamma
@@ -38,7 +37,73 @@ IGT_TEST_DESCRIPTION("Test Color Features at Pipe level");
* Functionality: colorspace
* Mega feature: Color mgmt
* Test category: functionality test
+ *
+ * SUBTEST: gamma
+ * Description: Verify that gamma LUT transformation works correctly
+ * Driver requirement: i915, xe
+ * Functionality: colorspace
+ * Mega feature: Color mgmt
+ * Test category: functionality test
+ *
+ * SUBTEST: legacy-gamma
+ * Description: Verify that legacy gamma LUT transformation works correctly
+ * Driver requirement: i915, xe
+ * Functionality: colorspace
+ * Mega feature: Color mgmt
+ * Test category: functionality test
+ *
+ * SUBTEST: legacy-gamma-reset
+ * Description: Verify that setting the legacy gamma LUT resets the gamma LUT
+ * set through GAMMA_LUT property
+ * Driver requirement: i915, xe
+ * Functionality: colorspace
+ * Mega feature: Color mgmt
+ * Test category: functionality test
+ *
+ * SUBTEST: ctm-%s
+ * Description: Check the color transformation %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: colorspace
+ * Mega feature: Color mgmt
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @0-25: for 0.25 transparency
+ * @0-50: for 0.50 transparency
+ * @0-75: for 0.75 transparency
+ * @blue-to-red: from blue to red
+ * @green-to-red: from green to red
+ * @max: for maximum transparency
+ * @negative: for negative transparency
+ * @red-to-blue: from red to blue
+ * @signed: for correct signed handling
+ */
+
+/**
+ * SUBTEST: deep-color
+ * Description: Verify that deep color works correctly
+ * Driver requirement: i915, xe
+ * Functionality: colorspace
+ * Mega feature: Color mgmt
+ * Test category: functionality test
+ *
+ * SUBTEST: invalid-%s-sizes
+ * Description: Negative check for %arg[1] sizes
+ * Driver requirement: i915, xe
+ * Functionality: colorspace
+ * Mega feature: Color mgmt
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @ctm-matrix: Color transformation matrix
+ * @degamma-lut: Degamma LUT
+ * @gamma-lut: Gamma LUT
*/
+
+IGT_TEST_DESCRIPTION("Test Color Features at Pipe level");
+
static bool test_pipe_degamma(data_t *data,
igt_plane_t *primary)
{
@@ -127,15 +192,6 @@ static bool test_pipe_degamma(data_t *data,
return ret;
}
-/**
- * SUBTEST: gamma
- * Description: Verify that gamma LUT transformation works correctly
- * Driver requirement: i915, xe
- * Functionality: colorspace
- * Mega feature: Color mgmt
- * Test category: functionality test
- */
-
/*
* Draw 3 gradient rectangles in red, green and blue, with a maxed out gamma
* LUT and verify we have the same CRC as drawing solid color rectangles.
@@ -224,15 +280,6 @@ static bool test_pipe_gamma(data_t *data,
return ret;
}
-/**
- * SUBTEST: legacy-gamma
- * Description: Verify that legacy gamma LUT transformation works correctly
- * Driver requirement: i915, xe
- * Functionality: colorspace
- * Mega feature: Color mgmt
- * Test category: functionality test
- */
-
/*
* Draw 3 gradient rectangles in red, green and blue, with a maxed out legacy
* gamma LUT and verify we have the same CRC as drawing solid color rectangles
@@ -345,16 +392,6 @@ static bool test_pipe_legacy_gamma(data_t *data,
return ret;
}
-/**
- * SUBTEST: legacy-gamma-reset
- * Description: Verify that setting the legacy gamma LUT resets the gamma LUT
- * set through GAMMA_LUT property
- * Driver requirement: i915, xe
- * Functionality: colorspace
- * Mega feature: Color mgmt
- * Test category: functionality test
- */
-
/*
* Verify that setting the legacy gamma LUT resets the gamma LUT set
* through the GAMMA_LUT property.
@@ -489,27 +526,6 @@ end:
return ret;
}
-/**
- * SUBTEST: ctm-%s
- * Description: Check the color transformation %arg[1]
- * Driver requirement: i915, xe
- * Functionality: colorspace
- * Mega feature: Color mgmt
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @0-25: for 0.25 transparency
- * @0-50: for 0.50 transparency
- * @0-75: for 0.75 transparency
- * @blue-to-red: from blue to red
- * @green-to-red: from green to red
- * @max: for maximum transparency
- * @negative: for negative transparency
- * @red-to-blue: from red to blue
- * @signed: for correct signed handling
- */
-
/*
* Draw 3 rectangles using before colors with the ctm matrix apply and verify
* the CRC is equal to using after colors with an identify ctm matrix.
@@ -869,14 +885,6 @@ out:
test_cleanup(data);
}
-/**
- * SUBTEST: deep-color
- * Description: Verify that deep color works correctly
- * Driver requirement: i915, xe
- * Functionality: colorspace
- * Mega feature: Color mgmt
- * Test category: functionality test
- */
static void
run_deep_color_tests_for_pipe(data_t *data, enum pipe p)
{
@@ -978,20 +986,6 @@ run_deep_color_tests_for_pipe(data_t *data, enum pipe p)
test_cleanup(data);
}
-/**
- * SUBTEST: invalid-%s-sizes
- * Description: Negative check for %arg[1] sizes
- * Driver requirement: i915, xe
- * Functionality: colorspace
- * Mega feature: Color mgmt
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @ctm-matrix: Color transformation matrix
- * @degamma-lut: Degamma LUT
- * @gamma-lut: Gamma LUT
- */
static void
run_invalid_tests_for_pipe(data_t *data)
{
diff --git a/tests/kms_concurrent.c b/tests/kms_concurrent.c
index d2a781e35..8ba874e6b 100644
--- a/tests/kms_concurrent.c
+++ b/tests/kms_concurrent.c
@@ -22,14 +22,17 @@
*
*/
-#include "igt.h"
-#include "drmtest.h"
/**
* TEST: kms concurrent
* Category: Display
* Description: Test atomic mode setting concurrently with multiple planes and
* screen resolution
- *
+ */
+
+#include "igt.h"
+#include "drmtest.h"
+
+/**
* SUBTEST: multi-plane-atomic-lowres
* Description: Test atomic mode setting concurrently with multiple planes and
* screen resolution.
diff --git a/tests/kms_content_protection.c b/tests/kms_content_protection.c
index ea0c4a0ab..00eec0fd5 100644
--- a/tests/kms_content_protection.c
+++ b/tests/kms_content_protection.c
@@ -27,6 +27,7 @@
* Category: Display
* Description: Test content protection (HDCP)
*/
+
#include <poll.h>
#include <fcntl.h>
#include <sys/epoll.h>
@@ -37,6 +38,77 @@
#include "igt_kms.h"
#include "igt_kmod.h"
+/**
+ * SUBTEST: lic
+ * Description: Test for the integrity of link.
+ * Driver requirement: i915, xe
+ * Functionality: hdcp1.4
+ * Mega feature: HDCP
+ * Test category: functionality test
+ *
+ * SUBTEST: content-type-change
+ * Description: Test the content type change when the content protection already
+ * enabled
+ * Driver requirement: i915, xe
+ * Functionality: hdcp1.4, hdcp2.2
+ * Mega feature: HDCP
+ * Test category: functionality test
+ *
+ * SUBTEST: mei-interface
+ * Description: Test the teardown and rebuild of the interface between Intel
+ * and mei hdcp.
+ * Driver requirement: i915, xe
+ * Functionality: hdcp1.4, hdcp2.2
+ * Mega feature: HDCP
+ * Test category: functionality test
+ *
+ * SUBTEST: srm
+ * Description: This test writes the facsimile SRM into the /lib/firmware/ and
+ * check the kernel parsing of it by invoking the hdcp authentication.
+ * Driver requirement: i915, xe
+ * Functionality: hdcp1.4
+ * Mega feature: HDCP
+ * Test category: functionality test
+ *
+ * SUBTEST: uevent
+ * Description: Test to detect the HDCP status change when we are reading the
+ * uevent sent with the corresponding connector id and property id.
+ * Driver requirement: i915, xe
+ * Functionality: hdcp1.4
+ * Mega feature: HDCP
+ * Test category: functionality test
+ *
+ * SUBTEST: %s
+ * Description: Test content protection with %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: hdcp1.4
+ * Mega feature: HDCP
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @atomic: atomic modesetting
+ * @atomic-dpms: DPMS ON/OFF during atomic modesetting.
+ * @legacy: legacy style commit
+ * @type1: content type 1 that can be handled only through HDCP2.2.
+ */
+
+/**
+ * SUBTEST: dp-mst-%s
+ * Description: Test Content protection %arg[1] over DP MST.
+ * Driver requirement: i915, xe
+ * Functionality: hdcp1.4, mst
+ * Mega feature: HDCP
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @lic-type-0: Type 0 with LIC
+ * @lic-type-1: Type 1 with LIC.
+ * @type-0: Type 0
+ * @type-1: Type 1
+ */
+
IGT_TEST_DESCRIPTION("Test content protection (HDCP)");
struct data {
@@ -490,60 +562,6 @@ test_fini(igt_output_t *output, enum igt_commit_style s)
igt_display_commit2(&data.display, s);
}
-/**
- * SUBTEST: lic
- * Description: Test for the integrity of link.
- * Driver requirement: i915, xe
- * Functionality: hdcp1.4
- * Mega feature: HDCP
- * Test category: functionality test
- *
- * SUBTEST: content-type-change
- * Description: Test the content type change when the content protection already
- * enabled
- * Driver requirement: i915, xe
- * Functionality: hdcp1.4, hdcp2.2
- * Mega feature: HDCP
- * Test category: functionality test
- *
- * SUBTEST: mei-interface
- * Description: Test the teardown and rebuild of the interface between Intel
- * and mei hdcp.
- * Driver requirement: i915, xe
- * Functionality: hdcp1.4, hdcp2.2
- * Mega feature: HDCP
- * Test category: functionality test
- *
- * SUBTEST: srm
- * Description: This test writes the facsimile SRM into the /lib/firmware/ and
- * check the kernel parsing of it by invoking the hdcp authentication.
- * Driver requirement: i915, xe
- * Functionality: hdcp1.4
- * Mega feature: HDCP
- * Test category: functionality test
- *
- * SUBTEST: uevent
- * Description: Test to detect the HDCP status change when we are reading the
- * uevent sent with the corresponding connector id and property id.
- * Driver requirement: i915, xe
- * Functionality: hdcp1.4
- * Mega feature: HDCP
- * Test category: functionality test
- *
- * SUBTEST: %s
- * Description: Test content protection with %arg[1]
- * Driver requirement: i915, xe
- * Functionality: hdcp1.4
- * Mega feature: HDCP
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @atomic: atomic modesetting
- * @atomic-dpms: DPMS ON/OFF during atomic modesetting.
- * @legacy: legacy style commit
- * @type1: content type 1 that can be handled only through HDCP2.2.
- */
static void
test_content_protection(enum igt_commit_style s, int content_type)
{
@@ -631,21 +649,6 @@ static void test_cp_lic_on_mst(igt_output_t *mst_outputs[], int valid_outputs, b
}
}
-/**
- * SUBTEST: dp-mst-%s
- * Description: Test Content protection %arg[1] over DP MST.
- * Driver requirement: i915, xe
- * Functionality: hdcp1.4, mst
- * Mega feature: HDCP
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @lic-type-0: Type 0 with LIC
- * @lic-type-1: Type 1 with LIC.
- * @type-0: Type 0
- * @type-1: Type 1
- */
static void
test_content_protection_mst(int content_type)
{
diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
index 76c01f557..1d0eab6f5 100644
--- a/tests/kms_cursor_crc.c
+++ b/tests/kms_cursor_crc.c
@@ -22,13 +22,6 @@
*
*/
-#include "igt.h"
-#include <errno.h>
-#include <limits.h>
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-
/**
* TEST: kms cursor crc
* Category: Display
@@ -42,6 +35,77 @@
* software.
*/
+#include "igt.h"
+#include <errno.h>
+#include <limits.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+
+/**
+ * SUBTEST: cursor-dpms
+ * Description: Check random placement of a cursor with DPMS.
+ * Driver requirement: i915, xe
+ * Functionality: cursor, dpms
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: cursor-suspend
+ * Description: Check random placement of a cursor with suspend.
+ * Driver requirement: i915, xe
+ * Functionality: cursor, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: cursor-%s
+ * Description: %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @alpha-opaque: Validates the composition of a fully opaque cursor plane,
+ * i.e., alpha channel equal to 1.0.
+ * @alpha-transparent: Validates the composition of a fully transparent cursor
+ * plane, i.e., alpha channel equal to 0.0.
+ * @size-change: Create a maximum size cursor, then change the size in
+ * flight to smaller ones to see that the size is applied
+ * correctly.
+ */
+
+/**
+ * SUBTEST: cursor-%s-%s
+ * Description: Check if a %arg[2] cursor is %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @offscreen: well-positioned outside the screen
+ * @onscreen: well-positioned inside the screen
+ * @random: randomly placed
+ * @rapid-movement: rapidly udates for movements
+ * @sliding: smooth for horizontal, vertical & diagonal movements
+ *
+ * arg[2]:
+ *
+ * @128x128: 128x128 size
+ * @128x42: 128x42 size
+ * @256x256: 256x256 size
+ * @256x85: 256x85 size
+ * @32x10: 32x10 size
+ * @32x32: 32x32 size
+ * @512x170: 512x170 size
+ * @512x512: 512x512 size
+ * @64x21: 64x21 size
+ * @64x64: 64x64 size
+ * @max-size: Max supported size
+ */
+
IGT_TEST_DESCRIPTION(
"Use the display CRC support to validate cursor plane functionality. "
"The test will position the cursor plane either fully onscreen, "
@@ -654,38 +718,6 @@ static bool require_cursor_size(data_t *data, int w, int h)
return !!ret;
}
-/**
- * SUBTEST: cursor-dpms
- * Description: Check random placement of a cursor with DPMS.
- * Driver requirement: i915, xe
- * Functionality: cursor, dpms
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: cursor-suspend
- * Description: Check random placement of a cursor with suspend.
- * Driver requirement: i915, xe
- * Functionality: cursor, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: cursor-%s
- * Description: %arg[1]
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @alpha-opaque: Validates the composition of a fully opaque cursor plane,
- * i.e., alpha channel equal to 1.0.
- * @alpha-transparent: Validates the composition of a fully transparent cursor
- * plane, i.e., alpha channel equal to 0.0.
- * @size-change: Create a maximum size cursor, then change the size in
- * flight to smaller ones to see that the size is applied
- * correctly.
- */
static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, int cursor_h)
{
prepare_crtc(data, cursor_w, cursor_h);
@@ -782,37 +814,6 @@ static bool execution_constraint(enum pipe pipe)
return false;
}
-
-/**
- * SUBTEST: cursor-%s-%s
- * Description: Check if a %arg[2] cursor is %arg[1].
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @offscreen: well-positioned outside the screen
- * @onscreen: well-positioned inside the screen
- * @random: randomly placed
- * @rapid-movement: rapidly udates for movements
- * @sliding: smooth for horizontal, vertical & diagonal movements
- *
- * arg[2]:
- *
- * @128x128: 128x128 size
- * @128x42: 128x42 size
- * @256x256: 256x256 size
- * @256x85: 256x85 size
- * @32x10: 32x10 size
- * @32x32: 32x32 size
- * @512x170: 512x170 size
- * @512x512: 512x512 size
- * @64x21: 64x21 size
- * @64x64: 64x64 size
- * @max-size: Max supported size
- */
static void run_size_tests(data_t *data, int w, int h)
{
enum pipe pipe;
diff --git a/tests/kms_cursor_edge_walk.c b/tests/kms_cursor_edge_walk.c
index 1e233306d..749cd92e4 100644
--- a/tests/kms_cursor_edge_walk.c
+++ b/tests/kms_cursor_edge_walk.c
@@ -22,18 +22,21 @@
*
*/
+/**
+ * TEST: kms cursor edge walk
+ * Category: Display
+ * Description: Exercise CHV pipe C cursor fail
+ * Description: Test to check different cursor sizes by walking different edges of screen
+ */
+
#include "igt.h"
#include <errno.h>
#include <limits.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
+
/**
- * TEST: kms cursor edge walk
- * Category: Display
- * Description: Exercise CHV pipe C cursor fail
- * Description: Test to check different cursor sizes by walking different edges of screen
- *
* SUBTEST: %s-%s
* Description: Checking cursor size %arg[1] by walking %arg[2] of screen
* Driver requirement: i915, xe
diff --git a/tests/kms_cursor_legacy.c b/tests/kms_cursor_legacy.c
index 861581c93..07c50aba6 100644
--- a/tests/kms_cursor_legacy.c
+++ b/tests/kms_cursor_legacy.c
@@ -37,6 +37,256 @@
#include "igt_rand.h"
#include "igt_stats.h"
+/**
+ * SUBTEST: %s-%s
+ * Description: Test checks how many cursor updates we can fit between vblanks
+ * on single/all pipes with different modes, priority and number
+ * of processes
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @single: Single
+ * @torture: Torture
+ * @forked: Forked
+ *
+ * arg[2]:
+ *
+ * @bo: BO
+ * @move: Move
+ */
+
+/**
+ * SUBTEST: basic-busy-flip-before-cursor-%s
+ * Description: Cursor test with %arg[1] mode
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: basic-busy-flip-before-cursor-varying-size
+ * Description: Change the size of cursor b/w 64*64 to maxw x maxh.
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @atomic: atomic
+ * @legacy: legacy
+ */
+
+/**
+ * SUBTEST: basic-flip-after-cursor-%s
+ * Description: Cursor test with %arg[1]
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: basic-flip-before-cursor-%s
+ * Description: Cursor test with %arg[1]
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ *
+ * arg[1]:
+ *
+ * @atomic: atomic mode
+ * @legacy: legacy mode
+ * @varying-size: varying size
+ */
+
+/**
+ * SUBTEST: %s-flip-before-cursor-%s
+ * Description: Adds variety of tests:
+ * - varying-size: change the size of cursor b/w 64*64 to maxw x maxh.\n
+ * - atomic-transition: alternates between a full screen sprite plane
+ * and full screen primary plane.\n"
+ * - toggle: which toggles cursor visibility and make sure cursor moves
+ * between updates.
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @short:
+ * @short-busy:
+ *
+ * arg[2]:
+ *
+ * @atomic-transitions:
+ * @atomic-transitions-varying-size:
+ * @toggle:
+ */
+
+/**
+ * SUBTEST: short-flip-after-cursor-%s
+ * Description: Adds variety of tests:
+ * - varying-size: change the size of cursor b/w 64*64 to maxw x maxh.\n
+ * - atomic-transition: alternates between a full screen sprite plane
+ * and full screen primary plane.\n"
+ * - toggle: which toggles cursor visibility and make sure cursor moves
+ * between updates.
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @atomic-transitions:
+ * @atomic-transitions-varying-size:
+ * @toggle:
+ */
+
+/**
+ * SUBTEST: long-nonblocking-modeset-vs-cursor-atomic
+ * Description: Test checks how many cursor updates we can fit between vblanks
+ * on all pipes with different modes, priority and number of processes
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: nonblocking-modeset-vs-cursor-atomic
+ * Description: Test checks how many cursor updates we can fit between vblanks
+ * on all pipes with different modes, priority and number of processes
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: 2x-%s-%s
+ * Description: This test executes flips on both CRTCs while running cursor
+ * updates in parallel
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @flip-vs-cursor:
+ * @flip-vs-cursor:
+ * @long-flip-vs-cursor:
+ * @long-flip-vs-cursor:
+ *
+ * arg[2]:
+ *
+ * @atomic:
+ * @legacy:
+ */
+
+/**
+ * SUBTEST: 2x-%s-atomic
+ * Description: This test executes flips on both CRTCs while running cursor
+ * updates in parallel
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @long-nonblocking-modeset-vs-cursor:
+ * @nonblocking-modeset-vs-cursor:
+ */
+
+/**
+ * SUBTEST: %s-%s
+ * Description: The essence of the basic test is that neither the cursor nor the
+ * nonblocking flip stall the application of the next
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @cursor-vs-flip:
+ * @cursorA-vs-flipA:
+ * @cursorA-vs-flipB:
+ * @cursorB-vs-flipA:
+ * @cursorB-vs-flipB:
+ * @flip-vs-cursor:
+ *
+ * arg[2]:
+ *
+ * @atomic:
+ * @atomic-transitions:
+ * @atomic-transitions-varying-size:
+ * @legacy:
+ * @toggle:
+ * @varying-size:
+ */
+
+/**
+ * SUBTEST: 2x-%s-%s
+ * Description: This test executes flips on both CRTCs while running cursor updates in parallel
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @cursor-vs-flip:
+ * @cursor-vs-flip:
+ * @long-cursor-vs-flip:
+ * @long-cursor-vs-flip:
+ *
+ * arg[2]:
+ *
+ * @atomic:
+ * @legacy:
+ */
+
+/**
+ * SUBTEST: flip-vs-cursor-crc-%s
+ * Description: this test perform a page flip followed by a cursor update
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @atomic:
+ * @legacy:
+ */
+
+/**
+ * SUBTEST: flip-vs-cursor-busy-crc-%s
+ * Description: this test perform a busy bo update followed by a cursor update
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @atomic:
+ * @legacy:
+ */
+
+/**
+ * SUBTEST: modeset-atomic-cursor-hotspot
+ * Description: Test changes the cursor hotspot and checks that the property is
+ * updated accordignly
+ * Driver requirement: i915, xe
+ * Functionality: cursor
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
#if defined(__x86_64__) || defined(__i386__)
#define cpu_relax() __builtin_ia32_pause()
#else
@@ -78,27 +328,6 @@ static void override_output_modes(igt_display_t *display,
igt_output_set_pipe(output2, PIPE_NONE);
}
-/**
- * SUBTEST: %s-%s
- * Description: Test checks how many cursor updates we can fit between vblanks
- * on single/all pipes with different modes, priority and number
- * of processes
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @single: Single
- * @torture: Torture
- * @forked: Forked
- *
- * arg[2]:
- *
- * @bo: BO
- * @move: Move
- */
static void stress(igt_display_t *display,
enum pipe pipe, int num_children, unsigned mode,
int timeout)
@@ -569,93 +798,6 @@ enum basic_flip_cursor {
#define BASIC_BUSY 0x1
-/**
- * SUBTEST: basic-busy-flip-before-cursor-%s
- * Description: Cursor test with %arg[1] mode
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: cursor
- * Mega feature: General Display Features
- *
- * SUBTEST: basic-busy-flip-before-cursor-varying-size
- * Description: Change the size of cursor b/w 64*64 to maxw x maxh.
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @atomic: atomic
- * @legacy: legacy
- */
-
-/**
- * SUBTEST: basic-flip-after-cursor-%s
- * Description: Cursor test with %arg[1]
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: cursor
- * Mega feature: General Display Features
- *
- * SUBTEST: basic-flip-before-cursor-%s
- * Description: Cursor test with %arg[1]
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: cursor
- * Mega feature: General Display Features
- *
- * arg[1]:
- *
- * @atomic: atomic mode
- * @legacy: legacy mode
- * @varying-size: varying size
- */
-
-/**
- * SUBTEST: %s-flip-before-cursor-%s
- * Description: Adds variety of tests:
- * - varying-size: change the size of cursor b/w 64*64 to maxw x maxh.\n
- * - atomic-transition: alternates between a full screen sprite plane
- * and full screen primary plane.\n"
- * - toggle: which toggles cursor visibility and make sure cursor moves
- * between updates.
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @short:
- * @short-busy:
- *
- * arg[2]:
- *
- * @atomic-transitions:
- * @atomic-transitions-varying-size:
- * @toggle:
- */
-
-/**
- * SUBTEST: short-flip-after-cursor-%s
- * Description: Adds variety of tests:
- * - varying-size: change the size of cursor b/w 64*64 to maxw x maxh.\n
- * - atomic-transition: alternates between a full screen sprite plane
- * and full screen primary plane.\n"
- * - toggle: which toggles cursor visibility and make sure cursor moves
- * between updates.
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @atomic-transitions:
- * @atomic-transitions-varying-size:
- * @toggle:
- */
static void basic_flip_cursor(igt_display_t *display,
enum flip_test mode,
enum basic_flip_cursor order,
@@ -977,23 +1119,6 @@ static void flip_vs_cursor(igt_display_t *display, enum flip_test mode, int nloo
igt_remove_fb(display->drm_fd, &cursor_fb2);
}
-/**
- * SUBTEST: long-nonblocking-modeset-vs-cursor-atomic
- * Description: Test checks how many cursor updates we can fit between vblanks
- * on all pipes with different modes, priority and number of processes
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: nonblocking-modeset-vs-cursor-atomic
- * Description: Test checks how many cursor updates we can fit between vblanks
- * on all pipes with different modes, priority and number of processes
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void nonblocking_modeset_vs_cursor(igt_display_t *display, int loops)
{
struct igt_fb fb_info, cursor_fb;
@@ -1093,42 +1218,6 @@ static void wait_for_modeset(igt_display_t *display, unsigned flags, int timeout
igt_reset_timeout();
}
-/**
- * SUBTEST: 2x-%s-%s
- * Description: This test executes flips on both CRTCs while running cursor
- * updates in parallel
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @flip-vs-cursor:
- * @flip-vs-cursor:
- * @long-flip-vs-cursor:
- * @long-flip-vs-cursor:
- *
- * arg[2]:
- *
- * @atomic:
- * @legacy:
- */
-
-/**
- * SUBTEST: 2x-%s-atomic
- * Description: This test executes flips on both CRTCs while running cursor
- * updates in parallel
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @long-nonblocking-modeset-vs-cursor:
- * @nonblocking-modeset-vs-cursor:
- */
static void two_screens_flip_vs_cursor(igt_display_t *display, int nloops, bool modeset, bool atomic)
{
struct drm_mode_cursor arg1[2], arg2[2];
@@ -1316,33 +1405,6 @@ done:
munmap((void *)shared, PAGE_SIZE);
}
-/**
- * SUBTEST: %s-%s
- * Description: The essence of the basic test is that neither the cursor nor the
- * nonblocking flip stall the application of the next
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @cursor-vs-flip:
- * @cursorA-vs-flipA:
- * @cursorA-vs-flipB:
- * @cursorB-vs-flipA:
- * @cursorB-vs-flipB:
- * @flip-vs-cursor:
- *
- * arg[2]:
- *
- * @atomic:
- * @atomic-transitions:
- * @atomic-transitions-varying-size:
- * @legacy:
- * @toggle:
- * @varying-size:
- */
static void cursor_vs_flip(igt_display_t *display, enum flip_test mode, int nloops)
{
struct drm_mode_cursor arg[2];
@@ -1455,26 +1517,6 @@ static void cursor_vs_flip(igt_display_t *display, enum flip_test mode, int nloo
igt_remove_fb(display->drm_fd, &cursor_fb2);
}
-/**
- * SUBTEST: 2x-%s-%s
- * Description: This test executes flips on both CRTCs while running cursor updates in parallel
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @cursor-vs-flip:
- * @cursor-vs-flip:
- * @long-cursor-vs-flip:
- * @long-cursor-vs-flip:
- *
- * arg[2]:
- *
- * @atomic:
- * @legacy:
- */
static void two_screens_cursor_vs_flip(igt_display_t *display, int nloops, bool atomic)
{
struct drm_mode_cursor arg[2][2];
@@ -1603,19 +1645,6 @@ static void two_screens_cursor_vs_flip(igt_display_t *display, int nloops, bool
munmap((void *)shared, PAGE_SIZE);
}
-/**
- * SUBTEST: flip-vs-cursor-crc-%s
- * Description: this test perform a page flip followed by a cursor update
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @atomic:
- * @legacy:
- */
static void flip_vs_cursor_crc(igt_display_t *display, bool atomic)
{
struct drm_mode_cursor arg[2];
@@ -1688,19 +1717,6 @@ static void flip_vs_cursor_crc(igt_display_t *display, bool atomic)
igt_remove_fb(display->drm_fd, &cursor_fb);
}
-/**
- * SUBTEST: flip-vs-cursor-busy-crc-%s
- * Description: this test perform a busy bo update followed by a cursor update
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @atomic:
- * @legacy:
- */
static void flip_vs_cursor_busy_crc(igt_display_t *display, bool atomic)
{
struct drm_mode_cursor arg[2];
@@ -1813,15 +1829,6 @@ static void flip_vs_cursor_busy_crc(igt_display_t *display, bool atomic)
put_ahnd(ahnd);
}
-/**
- * SUBTEST: modeset-atomic-cursor-hotspot
- * Description: Test changes the cursor hotspot and checks that the property is
- * updated accordignly
- * Driver requirement: i915, xe
- * Functionality: cursor
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void modeset_atomic_cursor_hotspot(igt_display_t *display)
{
struct igt_fb cursor_fb;
diff --git a/tests/kms_display_modes.c b/tests/kms_display_modes.c
index f44d452b7..ad3839981 100644
--- a/tests/kms_display_modes.c
+++ b/tests/kms_display_modes.c
@@ -29,8 +29,27 @@
* Category: Display
* Description: Test Display Modes
*/
+
#include "igt.h"
+/**
+ * SUBTEST: extended-mode-basic
+ * Description: Test for validating display extended mode with a pair of connected
+ * displays
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: mst-extended-mode-negative
+ * Description: Negative test for validating display extended mode with a pair
+ * of connected 2k-4k or 4k-4k displays.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core, mst
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
#define HDISPLAY_4K 3840
#define VDISPLAY_4K 2160
@@ -205,15 +224,6 @@ static void run_extendedmode_basic(data_t *data,
for_each_connected_output_local((display), (output)) \
for_each_if (igt_pipe_connector_valid((pipe), (output)))
-/**
- * SUBTEST: extended-mode-basic
- * Description: Test for validating display extended mode with a pair of connected
- * displays
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void run_extendedmode_test(data_t *data) {
enum pipe pipe1, pipe2;
igt_output_t *output1, *output2;
@@ -259,15 +269,6 @@ static void run_extendedmode_test(data_t *data) {
}
}
-/**
- * SUBTEST: mst-extended-mode-negative
- * Description: Negative test for validating display extended mode with a pair
- * of connected 2k-4k or 4k-4k displays.
- * Driver requirement: i915, xe
- * Functionality: kms_core, mst
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void run_extendedmode_negative(data_t *data, int pipe1, int pipe2)
{
struct igt_fb fbs[2];
diff --git a/tests/kms_dither.c b/tests/kms_dither.c
index 3387a3b10..5683fe5c5 100644
--- a/tests/kms_dither.c
+++ b/tests/kms_dither.c
@@ -30,11 +30,28 @@
* Category: Display
* Description: Test Dithering block status
*/
+
#include "igt.h"
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
+/**
+ * SUBTEST: fb-8bpc-vs-panel-6bpc
+ * Description: Framebuffer BPC:8, Panel BPC:6, Expected Dither:Enable
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: fb-8bpc-vs-panel-8bpc
+ * Description: Framebuffer BPC:8, Panel BPC:8, Expected Dither:Disable
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
IGT_TEST_DESCRIPTION("Test Dithering block status");
/* Connector BPC */
@@ -186,21 +203,6 @@ static bool is_supported(igt_output_t *output)
igt_output_get_prop(output, IGT_CONNECTOR_MAX_BPC);
}
-/**
- * SUBTEST: fb-8bpc-vs-panel-6bpc
- * Description: Framebuffer BPC:8, Panel BPC:6, Expected Dither:Enable
- * Driver requirement: i915, xe
- * Functionality: colorspace, kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: fb-8bpc-vs-panel-8bpc
- * Description: Framebuffer BPC:8, Panel BPC:8, Expected Dither:Disable
- * Driver requirement: i915, xe
- * Functionality: colorspace, kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void
run_dither_test(data_t *data, int fb_bpc, int fb_format, int output_bpc)
{
diff --git a/tests/kms_dp_aux_dev.c b/tests/kms_dp_aux_dev.c
index e6a67e22e..597d4c2ef 100644
--- a/tests/kms_dp_aux_dev.c
+++ b/tests/kms_dp_aux_dev.c
@@ -22,6 +22,12 @@
*
*/
+/**
+ * TEST: kms dp aux dev
+ * Category: Display
+ * Description: Test that /dev/drm_dp_aux reads work
+ */
+
#include "config.h"
#include <sys/types.h>
@@ -31,11 +37,8 @@
#include "igt.h"
#include "igt_kms.h"
+
/**
- * TEST: kms dp aux dev
- * Category: Display
- * Description: Test that /dev/drm_dp_aux reads work
- *
* SUBTEST:
* Description: Test that /dev/drm_dp_aux reads work
* Driver requirement: i915, xe
diff --git a/tests/kms_feature_discovery.c b/tests/kms_feature_discovery.c
index 3a1f6d21d..234ea36c1 100644
--- a/tests/kms_feature_discovery.c
+++ b/tests/kms_feature_discovery.c
@@ -28,7 +28,18 @@
* Description: A metatest that checks for \"features\" presence.
* The subtests here should only skip or pass,
* anything else means we have a serious problem.
- *
+ */
+
+#include "igt.h"
+#ifdef HAVE_CHAMELIUM
+#include "igt_chamelium.h"
+#endif
+#include "igt_kms.h"
+#include "igt_psr.h"
+#include "igt_sysfs.h"
+#include "igt_types.h"
+
+/**
* SUBTEST: display
* Description: Make sure that we have display support with
* some outputs connected.
@@ -76,15 +87,6 @@
* arg[1].values: 2, 3, 4
*/
-#include "igt.h"
-#ifdef HAVE_CHAMELIUM
-#include "igt_chamelium.h"
-#endif
-#include "igt_kms.h"
-#include "igt_psr.h"
-#include "igt_sysfs.h"
-#include "igt_types.h"
-
static igt_display_t display;
IGT_TEST_DESCRIPTION("A metatest that checks for \"features\" presence. "
diff --git a/tests/kms_flip.c b/tests/kms_flip.c
index 2c60cdf6d..190400f13 100755
--- a/tests/kms_flip.c
+++ b/tests/kms_flip.c
@@ -41,6 +41,18 @@
#include <sys/time.h>
#include <sys/ioctl.h>
+#ifdef HAVE_LINUX_KD_H
+#include <linux/kd.h>
+#elif HAVE_SYS_KD_H
+#include <sys/kd.h>
+#endif
+#include <time.h>
+#include <pthread.h>
+
+#include "i915/gem_create.h"
+#include "igt_stats.h"
+#include "xe/xe_query.h"
+
/**
* SUBTEST: 2x-flip-vs-fences
* Description: Test to validate pageflips along with avialable fences on a pair
@@ -279,17 +291,40 @@
* @modeset-vs-vblank-race: modeset and check for vblank
*/
-#ifdef HAVE_LINUX_KD_H
-#include <linux/kd.h>
-#elif HAVE_SYS_KD_H
-#include <sys/kd.h>
-#endif
-#include <time.h>
-#include <pthread.h>
-
-#include "i915/gem_create.h"
-#include "igt_stats.h"
-#include "xe/xe_query.h"
+/**
+ * SUBTEST: basic-flip-vs-dpms
+ * Description: Basic test to valide pageflip with dpms
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: dpms, vblank
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: basic-flip-vs-%s
+ * Description: Basic test to valide pageflip with %arg[1]
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: vblank
+ * Mega feature: General Display Features
+ *
+ * arg[1]:
+ *
+ * @modeset: modeset
+ * @wf_vblank: wait for vblank
+ *
+ * SUBTEST: basic-plain-flip
+ * Description: Basic test for validating page flip
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: vblank
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: nonblocking-read
+ * Description: Tests that nonblocking reading fails correctly
+ * Driver requirement: i915, xe
+ * Functionality: vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
#define TEST_DPMS (1 << 0)
@@ -1804,34 +1839,6 @@ static void run_test_on_crtc_set(struct test_output *o, int *crtc_idxs,
__run_test_on_crtc_set(o, crtc_idxs, crtc_count, duration_ms);
}
-/**
- * SUBTEST: basic-flip-vs-dpms
- * Description: Basic test to valide pageflip with dpms
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: dpms, vblank
- * Mega feature: General Display Features
- *
- * SUBTEST: basic-flip-vs-%s
- * Description: Basic test to valide pageflip with %arg[1]
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: vblank
- * Mega feature: General Display Features
- *
- * arg[1]:
- *
- * @modeset: modeset
- * @wf_vblank: wait for vblank
- *
- * SUBTEST: basic-plain-flip
- * Description: Basic test for validating page flip
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: vblank
- * Mega feature: General Display Features
- */
-
static void run_test(int duration, int flags)
{
struct test_output o;
@@ -2016,14 +2023,6 @@ static void kms_flip_exit_handler(int sig)
kmstest_set_connector_dpms(drm_fd, last_connector, DRM_MODE_DPMS_ON);
}
-/**
- * SUBTEST: nonblocking-read
- * Description: Tests that nonblocking reading fails correctly
- * Driver requirement: i915, xe
- * Functionality: vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_nonblocking_read(int in)
{
char buffer[1024];
diff --git a/tests/kms_flip_event_leak.c b/tests/kms_flip_event_leak.c
index 57f6f64f7..1c0b766b3 100644
--- a/tests/kms_flip_event_leak.c
+++ b/tests/kms_flip_event_leak.c
@@ -22,6 +22,12 @@
*
*/
+/**
+ * TEST: kms flip event leak
+ * Category: Display
+ * Description: Test to validate flip event leak
+ */
+
#include "igt.h"
#include <errno.h>
#include <stdbool.h>
@@ -32,10 +38,6 @@
#include "xe/xe_query.h"
/**
- * TEST: kms flip event leak
- * Category: Display
- * Description: Test to validate flip event leak
- *
* SUBTEST: basic
* Description: This test tries to provoke the kernel into leaking a pending
* page flip event when the fd is closed before the flip has
diff --git a/tests/kms_force_connector_basic.c b/tests/kms_force_connector_basic.c
index e3b9034db..55e6a7767 100644
--- a/tests/kms_force_connector_basic.c
+++ b/tests/kms_force_connector_basic.c
@@ -30,6 +30,36 @@
#include "igt.h"
+/**
+ * SUBTEST: force-load-detect
+ * Description: Test to detect forced load.
+ * Driver requirement: i915
+ * Functionality: force_connector, vga
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: force-connector-state
+ * Description: Test to check the forced connector state
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: force_connector
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: force-edid
+ * Description: Test to check the values after forcing edid
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: force_connector
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: prune-stale-modes
+ * Description: Tests pruning of stale modes
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: force_connector
+ * Mega feature: General Display Features
+ */
+
IGT_TEST_DESCRIPTION("Check the debugfs force connector/edid features work"
" correctly.");
@@ -69,14 +99,6 @@ static void reset_connectors(void)
drm_close_driver(drm_fd);
}
-/**
- * SUBTEST: force-load-detect
- * Description: Test to detect forced load.
- * Driver requirement: i915
- * Functionality: force_connector, vga
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void force_load_detect(int drm_fd, drmModeConnectorPtr connector, drmModeRes *res)
{
int i, j, w = 64, h = 64;
@@ -165,14 +187,6 @@ static void force_load_detect(int drm_fd, drmModeConnectorPtr connector, drmMode
}
}
-/**
- * SUBTEST: force-connector-state
- * Description: Test to check the forced connector state
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: force_connector
- * Mega feature: General Display Features
- */
static void force_connector_state(int drm_fd, drmModeConnectorPtr connector)
{
igt_display_t display;
@@ -212,14 +226,6 @@ static void force_connector_state(int drm_fd, drmModeConnectorPtr connector)
igt_display_fini(&display);
}
-/**
- * SUBTEST: force-edid
- * Description: Test to check the values after forcing edid
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: force_connector
- * Mega feature: General Display Features
- */
static void force_edid(int drm_fd, drmModeConnectorPtr connector)
{
drmModeConnector *temp;
@@ -261,14 +267,6 @@ static void force_edid(int drm_fd, drmModeConnectorPtr connector)
}
-/**
- * SUBTEST: prune-stale-modes
- * Description: Tests pruning of stale modes
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: force_connector
- * Mega feature: General Display Features
- */
static void prune_stale_modes(int drm_fd, drmModeConnectorPtr connector)
{
int i;
diff --git a/tests/kms_getfb.c b/tests/kms_getfb.c
index 059f66d99..b4a155e2d 100644
--- a/tests/kms_getfb.c
+++ b/tests/kms_getfb.c
@@ -32,6 +32,7 @@
* Category: Display
* Description: Tests GETFB and GETFB2 ioctls.
*/
+
#include "igt.h"
#include <unistd.h>
#include <stdlib.h>
@@ -50,6 +51,88 @@
#include "xe/xe_query.h"
#include "xe/xe_ioctl.h"
+/**
+ * SUBTEST: getfb-handle-%s
+ * Description: Tests error handling %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @closed: when passing a handle that has been closed.
+ * @not-fb: when passing an invalid handle.
+ * @valid: when passing an valid handle.
+ * @zero: for a zero'd input.
+ */
+
+/**
+ * SUBTEST: getfb-reject-ccs
+ * Description: Tests error handling while requesting CCS buffers it should
+ * refuse because getfb supports returning a single buffer handle.
+ * Driver requirement: i915, xe
+ * Functionality: ccs, kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: getfb-%s-different-handles
+ * Description: Tests error handling while requesting for two different handles
+ * from %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @addfb: same fd
+ * @repeated: different fd
+ */
+
+/**
+ * SUBTEST: getfb2-accept-ccs
+ * Description: Tests outputs are correct when retrieving a CCS framebuffer.
+ * Driver requirement: i915, xe
+ * Functionality: ccs, kms_gem_interop, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: getfb2-into-addfb2
+ * Description: Output check by passing the output of GETFB2 into ADDFB2.
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: getfb2-handle-%s
+ * Description: Tests error handling %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @closed: when passing a handle that has been closed
+ * @not-fb: when passing an invalid handle
+ * @zero: for a zero'd input
+ */
+
+/**
+ * SUBTEST: %s-handle-protection
+ * Description: Make sure %arg[1] return handles if caller is non-root or non-master.
+ * Driver requirement: i915, xe
+ * Functionality: kms_gem_interop
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @getfb: GETFB ioctl
+ * @getfb2: GETFB2 ioctl
+ */
+
IGT_TEST_DESCRIPTION("Tests GETFB and GETFB2 ioctls.");
static bool has_getfb_iface(int fd)
@@ -178,21 +261,6 @@ static uint32_t get_any_prop_id(int fd)
return 0;
}
-/**
- * SUBTEST: getfb-handle-%s
- * Description: Tests error handling %arg[1]
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @closed: when passing a handle that has been closed.
- * @not-fb: when passing an invalid handle.
- * @valid: when passing an valid handle.
- * @zero: for a zero'd input.
- */
static void test_handle_input(int fd)
{
struct drm_mode_fb_cmd2 add = {};
@@ -248,28 +316,6 @@ static void test_handle_input(int fd)
gem_close(fd, add.handles[0]);
}
-/**
- * SUBTEST: getfb-reject-ccs
- * Description: Tests error handling while requesting CCS buffers it should
- * refuse because getfb supports returning a single buffer handle.
- * Driver requirement: i915, xe
- * Functionality: ccs, kms_gem_interop, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: getfb-%s-different-handles
- * Description: Tests error handling while requesting for two different handles
- * from %arg[1].
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @addfb: same fd
- * @repeated: different fd
- */
static void test_duplicate_handles(int fd)
{
struct drm_mode_fb_cmd2 add = {};
@@ -335,34 +381,6 @@ static void test_duplicate_handles(int fd)
}
}
-/**
- * SUBTEST: getfb2-accept-ccs
- * Description: Tests outputs are correct when retrieving a CCS framebuffer.
- * Driver requirement: i915, xe
- * Functionality: ccs, kms_gem_interop, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: getfb2-into-addfb2
- * Description: Output check by passing the output of GETFB2 into ADDFB2.
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: getfb2-handle-%s
- * Description: Tests error handling %arg[1].
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @closed: when passing a handle that has been closed
- * @not-fb: when passing an invalid handle
- * @zero: for a zero'd input
- */
static void test_getfb2(int fd)
{
struct drm_mode_fb_cmd2 add_basic = {};
@@ -471,19 +489,6 @@ static void test_getfb2(int fd)
}
}
-/**
- * SUBTEST: %s-handle-protection
- * Description: Make sure %arg[1] return handles if caller is non-root or non-master.
- * Driver requirement: i915, xe
- * Functionality: kms_gem_interop
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @getfb: GETFB ioctl
- * @getfb2: GETFB2 ioctl
- */
static void test_handle_protection(void) {
int non_master_fd;
struct drm_mode_fb_cmd2 non_master_add = {};
diff --git a/tests/kms_hdmi_inject.c b/tests/kms_hdmi_inject.c
index 61f62fa7c..3a279e2c9 100644
--- a/tests/kms_hdmi_inject.c
+++ b/tests/kms_hdmi_inject.c
@@ -22,6 +22,14 @@
*
*/
+/**
+ * TEST: kms hdmi inject
+ * Category: Display
+ * Description: Test that in-kernel EDID parsing is producing expected results
+ * by forcing a HDMI connector with a known EDID and checking that
+ * the metadata exposed to user space matches.
+ */
+
#include "config.h"
#include <dirent.h>
@@ -32,12 +40,6 @@
#include "xe/xe_query.h"
/**
- * TEST: kms hdmi inject
- * Category: Display
- * Description: Test that in-kernel EDID parsing is producing expected results
- * by forcing a HDMI connector with a known EDID and checking that
- * the metadata exposed to user space matches.
- *
* SUBTEST: inject-4k
* Description: Make sure that 4K modes exposed by DRM match the forced EDID and
* modesetting using it succeed.
diff --git a/tests/kms_hdr.c b/tests/kms_hdr.c
index ed98a0c26..215f81892 100644
--- a/tests/kms_hdr.c
+++ b/tests/kms_hdr.c
@@ -25,12 +25,76 @@
* Category: Display
* Description: Test HDR metadata interfaces and bpc switch
*/
+
#include "igt.h"
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
#include "igt_edid.h"
+/**
+ * SUBTEST: bpc-switch
+ * Description: Tests switching between different display output bpc modes
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, hdr
+ * Mega feature: HDR
+ * Test category: functionality test
+ *
+ * SUBTEST: bpc-switch-dpms
+ * Description: Tests switching between different display output bpc modes with dpms
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, dpms, hdr
+ * Mega feature: HDR
+ * Test category: functionality test
+ *
+ * SUBTEST: bpc-switch-suspend
+ * Description: Tests switching between different display output bpc modes with suspend
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, hdr, suspend
+ * Mega feature: HDR
+ * Test category: functionality test
+ *
+ * SUBTEST: invalid-hdr
+ * Description: Test to ensure HDR is not enabled on non-HDR panel
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, hdr
+ * Mega feature: HDR
+ * Test category: functionality test
+ *
+ * SUBTEST: invalid-metadata-sizes
+ * Description: Tests invalid HDR metadata sizes
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, hdr
+ * Mega feature: HDR
+ * Test category: functionality test
+ *
+ * SUBTEST: static-toggle-dpms
+ * Description: Tests static toggle with dpms
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, dpms, hdr
+ * Mega feature: HDR
+ * Test category: functionality test
+ *
+ * SUBTEST: static-toggle-suspend
+ * Description: Tests static toggle with suspend
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, hdr, suspend
+ * Mega feature: HDR
+ * Test category: functionality test
+ *
+ * SUBTEST: static-%s
+ * Description: Tests %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: colorspace, hdr
+ * Mega feature: HDR
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @swap: swapping static HDR metadata
+ * @toggle: entering and exiting HDR mode
+ */
+
IGT_TEST_DESCRIPTION("Test HDR metadata interfaces and bpc switch");
/* HDR EDID parsing. */
@@ -213,28 +277,6 @@ static bool has_max_bpc(igt_output_t *output)
igt_output_get_prop(output, IGT_CONNECTOR_MAX_BPC);
}
-/**
- * SUBTEST: bpc-switch
- * Description: Tests switching between different display output bpc modes
- * Driver requirement: i915, xe
- * Functionality: colorspace, hdr
- * Mega feature: HDR
- * Test category: functionality test
- *
- * SUBTEST: bpc-switch-dpms
- * Description: Tests switching between different display output bpc modes with dpms
- * Driver requirement: i915, xe
- * Functionality: colorspace, dpms, hdr
- * Mega feature: HDR
- * Test category: functionality test
- *
- * SUBTEST: bpc-switch-suspend
- * Description: Tests switching between different display output bpc modes with suspend
- * Driver requirement: i915, xe
- * Functionality: colorspace, hdr, suspend
- * Mega feature: HDR
- * Test category: functionality test
- */
static void test_bpc_switch(data_t *data, uint32_t flags)
{
igt_display_t *display = &data->display;
@@ -588,47 +630,6 @@ static bool has_hdr(igt_output_t *output)
return igt_output_has_prop(output, IGT_CONNECTOR_HDR_OUTPUT_METADATA);
}
-/**
- * SUBTEST: invalid-hdr
- * Description: Test to ensure HDR is not enabled on non-HDR panel
- * Driver requirement: i915, xe
- * Functionality: colorspace, hdr
- * Mega feature: HDR
- * Test category: functionality test
- *
- * SUBTEST: invalid-metadata-sizes
- * Description: Tests invalid HDR metadata sizes
- * Driver requirement: i915, xe
- * Functionality: colorspace, hdr
- * Mega feature: HDR
- * Test category: functionality test
- *
- * SUBTEST: static-toggle-dpms
- * Description: Tests static toggle with dpms
- * Driver requirement: i915, xe
- * Functionality: colorspace, dpms, hdr
- * Mega feature: HDR
- * Test category: functionality test
- *
- * SUBTEST: static-toggle-suspend
- * Description: Tests static toggle with suspend
- * Driver requirement: i915, xe
- * Functionality: colorspace, hdr, suspend
- * Mega feature: HDR
- * Test category: functionality test
- *
- * SUBTEST: static-%s
- * Description: Tests %arg[1].
- * Driver requirement: i915, xe
- * Functionality: colorspace, hdr
- * Mega feature: HDR
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @swap: swapping static HDR metadata
- * @toggle: entering and exiting HDR mode
- */
static void test_hdr(data_t *data, uint32_t flags)
{
igt_display_t *display = &data->display;
diff --git a/tests/kms_invalid_mode.c b/tests/kms_invalid_mode.c
index db7b703c0..011936c32 100644
--- a/tests/kms_invalid_mode.c
+++ b/tests/kms_invalid_mode.c
@@ -28,6 +28,7 @@
* Description: Make sure all modesets are rejected when the requested mode is
* invalid
*/
+
#include "igt.h"
#include <limits.h>
#include <stdbool.h>
diff --git a/tests/kms_multipipe_modeset.c b/tests/kms_multipipe_modeset.c
index a968a3513..e67392668 100644
--- a/tests/kms_multipipe_modeset.c
+++ b/tests/kms_multipipe_modeset.c
@@ -24,12 +24,15 @@
* Karthik B S <karthik.b.s at intel.com>
*/
-#include "igt.h"
/**
* TEST: kms multipipe modeset
* Category: Display
* Description: Test simultaneous modeset on all the supported pipes
- *
+ */
+
+#include "igt.h"
+
+/**
* SUBTEST: basic-max-pipe-crc-check
* Description: Verify if simultaneous modesets on all the supported pipes is
* successful. Validate using CRC verification
diff --git a/tests/kms_panel_fitting.c b/tests/kms_panel_fitting.c
index a583e1435..af0c756ed 100644
--- a/tests/kms_panel_fitting.c
+++ b/tests/kms_panel_fitting.c
@@ -22,15 +22,18 @@
*
*/
+/**
+ * TEST: kms panel fitting
+ * Category: Display
+ * Description: Test display panel fitting
+ */
+
#include "igt.h"
#include <limits.h>
#include <math.h>
#include <sys/stat.h>
+
/**
- * TEST: kms panel fitting
- * Category: Display
- * Description: Test display panel fitting
- *
* SUBTEST: atomic-fastset
* Description: Tests panel fitting usages with atomic fastset.
* Driver requirement: i915, xe
diff --git a/tests/kms_pipe_crc_basic.c b/tests/kms_pipe_crc_basic.c
index d980c3786..9671a2d61 100644
--- a/tests/kms_pipe_crc_basic.c
+++ b/tests/kms_pipe_crc_basic.c
@@ -36,6 +36,81 @@
#include <string.h>
#include <fcntl.h>
+/**
+ * SUBTEST: bad-source
+ * Description: Tests error handling when the bad source is set.
+ * Driver requirement: i915, xe
+ * Functionality: crc
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: read-crc
+ * Description: Test for pipe CRC reads
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: crc
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: read-crc-frame-sequence
+ * Description: Tests the pipe CRC read and ensure frame sequence
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: crc
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: nonblocking-crc
+ * Description: Test for O_NONBLOCK CRC reads
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: crc
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: nonblocking-crc-frame-sequence
+ * Description: Test for O_NONBLOCK CRC reads and ensure frame sequence
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: crc
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: suspend-read-crc
+ * Description: Suspend test for pipe CRC reads
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: crc, suspend
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: hang-read-crc
+ * Description: Hang test for pipe CRC read
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: crc, hang
+ * Mega feature: General Display Features
+ */
+
+/**
+ * SUBTEST: compare-crc-sanitycheck-%s
+ * Description: Basic sanity check for CRC mismatches with %arg[1]
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: crc, pixel_format
+ * Mega feature: General Display Features
+ *
+ * arg[1]:
+ *
+ * @xr24: XR24 format
+ * @nv12: NV12 format
+ */
+
+/**
+ * SUBTEST: disable-crc-after-crtc
+ * Description: Check that disabling CRCs on a CRTC after having disabled the
+ * CRTC does not cause issues.
+ * Driver requirement: i915, xe
+ * Functionality: crc
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
static bool extended;
static enum pipe active_pipes[IGT_MAX_PIPES];
static uint32_t last_pipe;
@@ -65,14 +140,6 @@ static bool simulation_constraint(enum pipe pipe)
return false;
}
-/**
- * SUBTEST: bad-source
- * Description: Tests error handling when the bad source is set.
- * Driver requirement: i915, xe
- * Functionality: crc
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_bad_source(data_t *data)
{
errno = 0;
@@ -94,49 +161,6 @@ enum {
TEST_HANG = 1 << 3,
};
-/**
- * SUBTEST: read-crc
- * Description: Test for pipe CRC reads
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: crc
- * Mega feature: General Display Features
- *
- * SUBTEST: read-crc-frame-sequence
- * Description: Tests the pipe CRC read and ensure frame sequence
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: crc
- * Mega feature: General Display Features
- *
- * SUBTEST: nonblocking-crc
- * Description: Test for O_NONBLOCK CRC reads
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: crc
- * Mega feature: General Display Features
- *
- * SUBTEST: nonblocking-crc-frame-sequence
- * Description: Test for O_NONBLOCK CRC reads and ensure frame sequence
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: crc
- * Mega feature: General Display Features
- *
- * SUBTEST: suspend-read-crc
- * Description: Suspend test for pipe CRC reads
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: crc, suspend
- * Mega feature: General Display Features
- *
- * SUBTEST: hang-read-crc
- * Description: Hang test for pipe CRC read
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: crc, hang
- * Mega feature: General Display Features
- */
static void test_read_crc(data_t *data, enum pipe pipe,
igt_output_t *output, unsigned flags)
{
@@ -234,20 +258,6 @@ static void test_read_crc(data_t *data, enum pipe pipe,
igt_display_commit(display);
}
-/**
- * SUBTEST: compare-crc-sanitycheck-%s
- * Description: Basic sanity check for CRC mismatches with %arg[1]
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: crc, pixel_format
- * Mega feature: General Display Features
- *
- * arg[1]:
- *
- * @xr24: XR24 format
- * @nv12: NV12 format
- */
-
/*
* CRC-sanity test, to make sure there would be no CRC mismatches
*
@@ -313,15 +323,6 @@ static void test_compare_crc(data_t *data, enum pipe pipe, igt_output_t *output,
igt_remove_fb(data->drm_fd, &fb1);
}
-/**
- * SUBTEST: disable-crc-after-crtc
- * Description: Check that disabling CRCs on a CRTC after having disabled the
- * CRTC does not cause issues.
- * Driver requirement: i915, xe
- * Functionality: crc
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_disable_crc_after_crtc(data_t *data, enum pipe pipe,
igt_output_t *output)
{
diff --git a/tests/kms_plane.c b/tests/kms_plane.c
index 24df7e8ca..c02bca6ea 100644
--- a/tests/kms_plane.c
+++ b/tests/kms_plane.c
@@ -29,6 +29,7 @@
* Category: Display
* Description: Testes for KMS Plane
*/
+
#include "igt.h"
#include "igt_vec.h"
#include <errno.h>
@@ -37,6 +38,73 @@
#include <string.h>
#include "xe/xe_query.h"
+/**
+ * SUBTEST: plane-position-%s
+ * Description: Verify plane position using two planes to create a %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-position-hole-dpms
+ * Description: Verify plane position using two planes to create a partially
+ * covered screen and check for DPMS
+ * Driver requirement: i915, xe
+ * Functionality: dpms, plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @covered: fully covered screen
+ * @hole: partially covered screen
+ */
+
+/**
+ * SUBTEST: plane-panning-%s
+ * Description: Verify plane panning at %arg[1] using primary plane
+ * Driver requirement: i915, xe
+ * Functionality: plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-panning-bottom-right-suspend
+ * Description: Verify plane panning at bottom-right position with suspend using
+ * primary plane
+ * Driver requirement: i915, xe
+ * Functionality: plane, suspend
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @bottom-right: bottom-right position
+ * @top-left: top-left position
+ */
+
+/**
+ * SUBTEST: pixel-%s
+ * Description: verify the pixel formats for given plane and pipe
+ * Driver requirement: i915, xe
+ * Functionality: pixel_format, plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @format:
+ * @format-source-clamping: with source clamping
+ */
+
+/**
+ * SUBTEST: planar-pixel-format-settings
+ * Description: verify planar settings for pixel format are handled correctly
+ * Driver requirement: i915, xe
+ * Functionality: pixel_format, plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
/*
* Throw away enough lsbs in pixel formats tests
* to get a match despite some differences between
@@ -287,27 +355,6 @@ test_plane_position_with_output(data_t *data,
igt_remove_fb(data->drm_fd, &sprite_fb);
}
-/**
- * SUBTEST: plane-position-%s
- * Description: Verify plane position using two planes to create a %arg[1]
- * Driver requirement: i915, xe
- * Functionality: plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-position-hole-dpms
- * Description: Verify plane position using two planes to create a partially
- * covered screen and check for DPMS
- * Driver requirement: i915, xe
- * Functionality: dpms, plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @covered: fully covered screen
- * @hole: partially covered screen
- */
static void
test_plane_position(data_t *data, enum pipe pipe)
{
@@ -416,27 +463,6 @@ test_plane_panning_with_output(data_t *data,
igt_remove_fb(data->drm_fd, &primary_fb);
}
-/**
- * SUBTEST: plane-panning-%s
- * Description: Verify plane panning at %arg[1] using primary plane
- * Driver requirement: i915, xe
- * Functionality: plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-panning-bottom-right-suspend
- * Description: Verify plane panning at bottom-right position with suspend using
- * primary plane
- * Driver requirement: i915, xe
- * Functionality: plane, suspend
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @bottom-right: bottom-right position
- * @top-left: top-left position
- */
static void
test_plane_panning(data_t *data, enum pipe pipe)
{
@@ -1162,19 +1188,6 @@ static bool skip_plane(data_t *data, igt_plane_t *plane)
return index != 0 && index != 3 && index != 5;
}
-/**
- * SUBTEST: pixel-%s
- * Description: verify the pixel formats for given plane and pipe
- * Driver requirement: i915, xe
- * Functionality: pixel_format, plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @format:
- * @format-source-clamping: with source clamping
- */
static void
test_pixel_formats(data_t *data, enum pipe pipe)
{
@@ -1231,14 +1244,6 @@ test_pixel_formats(data_t *data, enum pipe pipe)
igt_assert_f(result, "At least one CRC mismatch happened\n");
}
-/**
- * SUBTEST: planar-pixel-format-settings
- * Description: verify planar settings for pixel format are handled correctly
- * Driver requirement: i915, xe
- * Functionality: pixel_format, plane
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_planar_settings(data_t *data)
{
enum pipe pipe = PIPE_A;
diff --git a/tests/kms_plane_alpha_blend.c b/tests/kms_plane_alpha_blend.c
index bff624ebe..636cfcca4 100644
--- a/tests/kms_plane_alpha_blend.c
+++ b/tests/kms_plane_alpha_blend.c
@@ -29,8 +29,56 @@
* Category: Display
* Description: Test plane alpha and blending mode properties
*/
+
#include "igt.h"
+/**
+ * SUBTEST: alpha-%s
+ * Description: Test to %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @7efc: validate alpha values 0x7e and 0xfc are swappable on
+ * pre-multiplied blend mode.
+ * @basic: basic plane alpha properties.
+ * @opaque-fb: alpha properties with opaque fb.
+ * @transparent-fb: alpha property with transparent fb.
+ */
+
+/**
+ * SUBTEST: coverage-vs-premult-vs-constant
+ * Description: Tests pipe coverage blending properties.
+ * Driver requirement: i915, xe
+ * Functionality: plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: coverage-7efc
+ * Description: Uses alpha values 0x7e and 0xfc to validate fg.alpha and
+ * plane_alpha are swappable on coverage blend mode.
+ * Driver requirement: i915, xe
+ * Functionality: plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: constant-alpha-%s
+ * Description: Tests plane alpha and blending properties with %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @max: maximum alpha value
+ * @mid: medium alpha value
+ * @min: minimum alpha value
+ */
+
IGT_TEST_DESCRIPTION("Test plane alpha and blending mode properties");
static bool extended;
@@ -482,52 +530,6 @@ static void coverage_premult_constant(data_t *data, enum pipe pipe, igt_plane_t
igt_pipe_crc_stop(data->pipe_crc);
}
-/**
- * SUBTEST: alpha-%s
- * Description: Test to %arg[1]
- * Driver requirement: i915, xe
- * Functionality: plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @7efc: validate alpha values 0x7e and 0xfc are swappable on
- * pre-multiplied blend mode.
- * @basic: basic plane alpha properties.
- * @opaque-fb: alpha properties with opaque fb.
- * @transparent-fb: alpha property with transparent fb.
- */
-
-/**
- * SUBTEST: coverage-vs-premult-vs-constant
- * Description: Tests pipe coverage blending properties.
- * Driver requirement: i915, xe
- * Functionality: plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: coverage-7efc
- * Description: Uses alpha values 0x7e and 0xfc to validate fg.alpha and
- * plane_alpha are swappable on coverage blend mode.
- * Driver requirement: i915, xe
- * Functionality: plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: constant-alpha-%s
- * Description: Tests plane alpha and blending properties with %arg[1].
- * Driver requirement: i915, xe
- * Functionality: plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @max: maximum alpha value
- * @mid: medium alpha value
- * @min: minimum alpha value
- */
static void run_test_on_pipe_planes(data_t *data, enum pipe pipe, igt_output_t *output,
bool blend, bool must_multiply,
void(*test)(data_t *, enum pipe, igt_plane_t *))
diff --git a/tests/kms_plane_cursor.c b/tests/kms_plane_cursor.c
index 22c5a709d..76a4ddba7 100644
--- a/tests/kms_plane_cursor.c
+++ b/tests/kms_plane_cursor.c
@@ -20,13 +20,15 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "igt.h"
-
/**
* TEST: kms plane cursor
* Category: Display
* Description: Tests cursor interactions with primary and overlay planes.
- *
+ */
+
+#include "igt.h"
+
+/**
* SUBTEST: overlay
* Description: Tests atomic cursor positioning on primary plane and overlay plane
* Driver requirement: i915, xe
diff --git a/tests/kms_plane_lowres.c b/tests/kms_plane_lowres.c
index d9a175c9b..79d48b6c5 100644
--- a/tests/kms_plane_lowres.c
+++ b/tests/kms_plane_lowres.c
@@ -28,6 +28,7 @@
* Description: Test atomic mode setting with a plane by switching between high
* and low resolutions
*/
+
#include "igt.h"
#include "drmtest.h"
#include <errno.h>
@@ -36,6 +37,31 @@
#include <string.h>
#include <time.h>
+/**
+ * SUBTEST: tiling-none
+ * Description: Tests the visibility of the planes when switching between high
+ * and low resolution with Linear buffer (no tiling)
+ * Driver requirement: i915, xe
+ * Functionality: plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: tiling-%s
+ * Description: Tests the visibility of the planes when switching between high
+ * and low resolution with %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: plane, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4: 4-tiling
+ * @x: x-tiling
+ * @y: y-tiling
+ * @yf: yf-tiling
+ */
+
IGT_TEST_DESCRIPTION("Test atomic mode setting with a plane by switching between high and low resolutions");
#define SDR_PLANE_BASE 3
@@ -267,30 +293,6 @@ static void test_cleanup(data_t *data)
igt_display_commit2(&data->display, COMMIT_ATOMIC);
}
-/**
- * SUBTEST: tiling-none
- * Description: Tests the visibility of the planes when switching between high
- * and low resolution with Linear buffer (no tiling)
- * Driver requirement: i915, xe
- * Functionality: plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: tiling-%s
- * Description: Tests the visibility of the planes when switching between high
- * and low resolution with %arg[1]
- * Driver requirement: i915, xe
- * Functionality: plane, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4: 4-tiling
- * @x: x-tiling
- * @y: y-tiling
- * @yf: yf-tiling
- */
static void run_test(data_t *data, uint64_t modifier)
{
enum pipe pipe;
diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
index b1ae35161..0d07beefc 100644
--- a/tests/kms_plane_multiple.c
+++ b/tests/kms_plane_multiple.c
@@ -27,6 +27,7 @@
* Category: Display
* Description: Test atomic mode setting with multiple planes.
*/
+
#include "igt.h"
#include "drmtest.h"
#include <errno.h>
@@ -35,6 +36,33 @@
#include <string.h>
#include <time.h>
+/**
+ * SUBTEST: tiling-none
+ * Description: Check that the kernel handles atomic updates of multiple planes
+ * correctly by changing their geometry and making sure the changes
+ * are reflected immediately after each commit.
+ * Driver requirement: i915, xe
+ * Functionality: plane
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: tiling-%s
+ * Description: Check that the kernel handles atomic updates of multiple planes
+ * correctly by changing their geometry and making sure the changes
+ * are reflected immediately after each commit.
+ * Driver requirement: i915, xe
+ * Functionality: plane, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4: 4-tiling
+ * @x: x-tiling
+ * @y: y-tiling
+ * @yf: yf-tiling
+ */
+
IGT_TEST_DESCRIPTION("Test atomic mode setting with multiple planes.");
#define SIZE_PLANE 256
@@ -378,32 +406,6 @@ test_plane_position(data_t *data, enum pipe pipe, igt_output_t *output, uint64_t
n_planes, modifier);
}
-/**
- * SUBTEST: tiling-none
- * Description: Check that the kernel handles atomic updates of multiple planes
- * correctly by changing their geometry and making sure the changes
- * are reflected immediately after each commit.
- * Driver requirement: i915, xe
- * Functionality: plane
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: tiling-%s
- * Description: Check that the kernel handles atomic updates of multiple planes
- * correctly by changing their geometry and making sure the changes
- * are reflected immediately after each commit.
- * Driver requirement: i915, xe
- * Functionality: plane, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4: 4-tiling
- * @x: x-tiling
- * @y: y-tiling
- * @yf: yf-tiling
- */
static void run_test(data_t *data, uint64_t modifier)
{
enum pipe pipe;
diff --git a/tests/kms_plane_scaling.c b/tests/kms_plane_scaling.c
index 720e82d38..2c27d6e4a 100644
--- a/tests/kms_plane_scaling.c
+++ b/tests/kms_plane_scaling.c
@@ -27,10 +27,250 @@
* Category: Display
* Description: Test display plane scaling
*/
+
#include "igt.h"
#include "igt_vec.h"
#include <math.h>
+/**
+ * SUBTEST: plane-scaler-unity-scaling-with-modifiers
+ * Description: Tests scaling with modifiers, unity scaling.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-scaler-with-clipping-clamping-modifiers
+ * Description: Tests scaling with clipping and clamping, modifiers.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-upscale-%s-with-modifiers
+ * Description: Tests upscaling with modifiers %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @20x20: from 20x20 fb
+ * @factor-0-25: for 0.25 scaling factor
+ */
+
+/**
+ * SUBTEST: plane-downscale-factor-%s-with-modifiers
+ * Description: Tests downscaling with modifiers for %arg[1] scaling factor.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @0-25: 0.25
+ * @0-5: 0.5
+ * @0-75: 0.75
+ */
+
+/**
+ * SUBTEST: plane-scaler-unity-scaling-with-rotation
+ * Description: Tests scaling with rotation, unity scaling.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-scaler-with-clipping-clamping-rotation
+ * Description: Tests scaling with clipping and clamping, rotation.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-upscale-%s-with-rotation
+ * Description: Tests upscaling with rotation %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @20x20: from 20x20 fb
+ * @factor-0-25: for 0.25 scaling factor
+ */
+
+/**
+ * SUBTEST: plane-downscale-factor-%s-with-rotation
+ * Description: Tests downscaling with rotation for %arg[1] scaling factor.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @0-25: 0.25
+ * @0-5: 0.5
+ * @0-75: 0.75
+ */
+
+/**
+ * SUBTEST: plane-scaler-unity-scaling-with-pixel-format
+ * Description: Tests scaling with pixel formats, unity scaling.
+ * Driver requirement: i915, xe
+ * Functionality: pixel_formats, plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-scaler-with-clipping-clamping-pixel-formats
+ * Description: Tests scaling with clipping and clamping, pixel formats.
+ * Driver requirement: i915, xe
+ * Functionality: pixel_formats, plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: plane-upscale-%s-with-pixel-format
+ * Description: Tests upscaling with pixel formats %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: pixel_formats, plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @20x20: from 20x20 fb
+ * @factor-0-25: for 0.25 scaling factor
+ */
+
+/**
+ * SUBTEST: plane-downscale-factor-%s-with-pixel-format
+ * Description: Tests downscaling with pixel formats for %arg[1] scaling factor.
+ * Driver requirement: i915, xe
+ * Functionality: pixel_formats, plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @0-25: 0.25
+ * @0-5: 0.5
+ * @0-75: 0.75
+ */
+
+/**
+ * SUBTEST: planes-downscale-factor-%s
+ * Description: Tests downscaling of 2 planes for %arg[1] scaling factor.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @0-25: 0.25
+ * @0-5: 0.5
+ * @0-75: 0.75
+ */
+
+/**
+ * SUBTEST: planes-downscale-factor-%s-%s
+ * Description: Tests downscaling (scaling factor %arg[1]) and upscaling (%arg[2])
+ * of 2 planes.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @0-25: 0.25
+ * @0-5: 0.5
+ * @0-75: 0.75
+ *
+ * arg[2]:
+ *
+ * @upscale-20x20: upscale 20x20
+ * @upscale-factor-0-25: scaling factor 0.25
+ * @unity-scaling: Unity
+ */
+
+/**
+ * SUBTEST: planes-scaler-unity-scaling
+ * Description: Tests scaling of 2 planes, unity scaling.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: planes-upscale-%s
+ * Description: Tests upscaling of 2 planes %arg[1].
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @20x20: from 20x20 fb
+ * @factor-0-25: for 0.25 scaling factor
+ */
+
+/**
+ * SUBTEST: planes-%s-downscale-factor-%s
+ * Description: Tests scaling (%arg[1]) and downscaling (scaling factor %arg[2])
+ * of 2 planes.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @unity-scaling: Unity
+ * @upscale-factor-0-25: scaling factor 0.25
+ * @upscale-20x20: upscale 20x20
+ *
+ * arg[2]:
+ *
+ * @0-25: 0.25
+ * @0-5: 0.5
+ * @0-75: 0.75
+ */
+
+/**
+ * SUBTEST: invalid-num-scalers
+ * Description: Negative test for number of scalers per pipe.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: 2x-scaler-multi-pipe
+ * Description: Tests scaling with multi-pipe.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: invalid-parameters
+ * Description: Test parameters which should not be accepted
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: intel-max-src-size
+ * Description: Test for validating max source size.
+ * Driver requirement: i915, xe
+ * Functionality: plane, scaling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
IGT_TEST_DESCRIPTION("Test display plane scaling");
enum scaler_combo_test_type {
@@ -529,48 +769,6 @@ static const uint64_t modifiers[] = {
I915_FORMAT_MOD_4_TILED
};
-/**
- * SUBTEST: plane-scaler-unity-scaling-with-modifiers
- * Description: Tests scaling with modifiers, unity scaling.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-scaler-with-clipping-clamping-modifiers
- * Description: Tests scaling with clipping and clamping, modifiers.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-upscale-%s-with-modifiers
- * Description: Tests upscaling with modifiers %arg[1].
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @20x20: from 20x20 fb
- * @factor-0-25: for 0.25 scaling factor
- */
-
-/**
- * SUBTEST: plane-downscale-factor-%s-with-modifiers
- * Description: Tests downscaling with modifiers for %arg[1] scaling factor.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @0-25: 0.25
- * @0-5: 0.5
- * @0-75: 0.75
- */
static void test_scaler_with_modifier_pipe(data_t *d,
int width, int height,
bool is_upscale,
@@ -603,48 +801,6 @@ static void test_scaler_with_modifier_pipe(data_t *d,
}
}
-/**
- * SUBTEST: plane-scaler-unity-scaling-with-rotation
- * Description: Tests scaling with rotation, unity scaling.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-scaler-with-clipping-clamping-rotation
- * Description: Tests scaling with clipping and clamping, rotation.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-upscale-%s-with-rotation
- * Description: Tests upscaling with rotation %arg[1].
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @20x20: from 20x20 fb
- * @factor-0-25: for 0.25 scaling factor
- */
-
-/**
- * SUBTEST: plane-downscale-factor-%s-with-rotation
- * Description: Tests downscaling with rotation for %arg[1] scaling factor.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @0-25: 0.25
- * @0-5: 0.5
- * @0-75: 0.75
- */
static void test_scaler_with_rotation_pipe(data_t *d,
int width, int height,
bool is_upscale,
@@ -678,48 +834,6 @@ static void test_scaler_with_rotation_pipe(data_t *d,
}
}
-/**
- * SUBTEST: plane-scaler-unity-scaling-with-pixel-format
- * Description: Tests scaling with pixel formats, unity scaling.
- * Driver requirement: i915, xe
- * Functionality: pixel_formats, plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-scaler-with-clipping-clamping-pixel-formats
- * Description: Tests scaling with clipping and clamping, pixel formats.
- * Driver requirement: i915, xe
- * Functionality: pixel_formats, plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: plane-upscale-%s-with-pixel-format
- * Description: Tests upscaling with pixel formats %arg[1].
- * Driver requirement: i915, xe
- * Functionality: pixel_formats, plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @20x20: from 20x20 fb
- * @factor-0-25: for 0.25 scaling factor
- */
-
-/**
- * SUBTEST: plane-downscale-factor-%s-with-pixel-format
- * Description: Tests downscaling with pixel formats for %arg[1] scaling factor.
- * Driver requirement: i915, xe
- * Functionality: pixel_formats, plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @0-25: 0.25
- * @0-5: 0.5
- * @0-75: 0.75
- */
static void test_scaler_with_pixel_format_pipe(data_t *d, int width, int height, bool is_upscale,
enum pipe pipe, igt_output_t *output)
{
@@ -855,83 +969,6 @@ static void setup_fb(int fd, int width, int height, struct igt_fb *fb)
fb);
}
-/**
- * SUBTEST: planes-downscale-factor-%s
- * Description: Tests downscaling of 2 planes for %arg[1] scaling factor.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @0-25: 0.25
- * @0-5: 0.5
- * @0-75: 0.75
- */
-/**
- * SUBTEST: planes-downscale-factor-%s-%s
- * Description: Tests downscaling (scaling factor %arg[1]) and upscaling (%arg[2])
- * of 2 planes.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @0-25: 0.25
- * @0-5: 0.5
- * @0-75: 0.75
- *
- * arg[2]:
- *
- * @upscale-20x20: upscale 20x20
- * @upscale-factor-0-25: scaling factor 0.25
- * @unity-scaling: Unity
- */
-/**
- * SUBTEST: planes-scaler-unity-scaling
- * Description: Tests scaling of 2 planes, unity scaling.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: planes-upscale-%s
- * Description: Tests upscaling of 2 planes %arg[1].
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @20x20: from 20x20 fb
- * @factor-0-25: for 0.25 scaling factor
- */
-/**
- * SUBTEST: planes-%s-downscale-factor-%s
- * Description: Tests scaling (%arg[1]) and downscaling (scaling factor %arg[2])
- * of 2 planes.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @unity-scaling: Unity
- * @upscale-factor-0-25: scaling factor 0.25
- * @upscale-20x20: upscale 20x20
- *
- * arg[2]:
- *
- * @0-25: 0.25
- * @0-5: 0.5
- * @0-75: 0.75
- */
-
static void
test_planes_scaling_combo(data_t *d, int w1, int h1, int w2, int h2,
enum pipe pipe, igt_output_t *output,
@@ -990,14 +1027,6 @@ test_planes_scaling_combo(data_t *d, int w1, int h1, int w2, int h2,
cleanup_fbs(d);
}
-/**
- * SUBTEST: invalid-num-scalers
- * Description: Negative test for number of scalers per pipe.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void
test_invalid_num_scalers(data_t *d, enum pipe pipe, igt_output_t *output)
{
@@ -1063,14 +1092,6 @@ test_invalid_num_scalers(data_t *d, enum pipe pipe, igt_output_t *output)
cleanup_fbs(d);
}
-/**
- * SUBTEST: 2x-scaler-multi-pipe
- * Description: Tests scaling with multi-pipe.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_scaler_with_multi_pipe_plane(data_t *d)
{
igt_display_t *display = &d->display;
@@ -1158,14 +1179,6 @@ static void test_scaler_with_multi_pipe_plane(data_t *d)
igt_assert_eq(ret1 && ret2, 0);
}
-/**
- * SUBTEST: invalid-parameters
- * Description: Test parameters which should not be accepted
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void invalid_parameter_tests(data_t *d)
{
enum pipe pipe = PIPE_A;
@@ -1248,15 +1261,6 @@ static drmModeModeInfo *find_mode(data_t *data, igt_output_t *output, const uint
return mode;
}
-/**
- * SUBTEST: intel-max-src-size
- * Description: Test for validating max source size.
- * Driver requirement: i915, xe
- * Functionality: plane, scaling
- * Mega feature: General Display Features
- * Test category: functionality test
- */
-
/*
* Max source/destination width/height for intel driver.
* These numbers are coming from
diff --git a/tests/kms_prime.c b/tests/kms_prime.c
index 14e44869d..c8ab2f6fd 100644
--- a/tests/kms_prime.c
+++ b/tests/kms_prime.c
@@ -21,6 +21,12 @@
* IN THE SOFTWARE.
*/
+/**
+ * TEST: kms prime
+ * Category: Display
+ * Description: Prime tests, focusing on KMS side
+ */
+
#include "igt.h"
#include "igt_device.h"
#include "igt_debugfs.h"
@@ -30,11 +36,8 @@
#include <sys/ioctl.h>
#include <sys/poll.h>
#include <time.h>
+
/**
- * TEST: kms prime
- * Category: Display
- * Description: Prime tests, focusing on KMS side
- *
* SUBTEST: D3hot
* Description: Validate pci state of dGPU when dGPU is idle and scanout is on iGPU
* Driver requirement: i915, xe
diff --git a/tests/kms_prop_blob.c b/tests/kms_prop_blob.c
index c92525227..199c673e3 100644
--- a/tests/kms_prop_blob.c
+++ b/tests/kms_prop_blob.c
@@ -30,12 +30,61 @@
* Category: Display
* Description: Tests behaviour of mass-data 'blob' properties.
*/
+
#include "igt.h"
#include <errno.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
+/**
+ * SUBTEST: blob-multiple
+ * Description: Test validates destroying multiple properties explicitly works as needed.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: blob-prop-%s
+ * Description: Tests validates the %arg[1] of the properties created.
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @core: validity
+ * @lifetime: lifetime
+ * @validate: blob size
+ */
+
+/**
+ * SUBTEST: basic
+ * Description: Test to ensure property support exists
+ * Driver requirement: i915, xe
+ * Test category: functionality test
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ *
+ * SUBTEST: invalid-%s-%s
+ * Description: Tests error handling when invalid properties are %ar[1] with %arg[2].
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @get: fetched
+ * @set: set
+ *
+ * arg[2]:
+ *
+ * @prop: blob object type
+ * @prop-any: object of any type
+ */
+
IGT_TEST_DESCRIPTION("Tests behaviour of mass-data 'blob' properties.");
static const struct drm_mode_modeinfo test_mode_valid = {
@@ -123,27 +172,6 @@ destroy_prop(int fd, uint32_t prop_id)
return 0;
}
-/**
- * SUBTEST: blob-multiple
- * Description: Test validates destroying multiple properties explicitly works as needed.
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: blob-prop-%s
- * Description: Tests validates the %arg[1] of the properties created.
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @core: validity
- * @lifetime: lifetime
- * @validate: blob size
- */
static void
test_validate(int fd)
{
@@ -264,14 +292,6 @@ test_core(int fd)
igt_assert_eq(validate_prop(fd, 0), ENOENT);
}
-/**
- * SUBTEST: basic
- * Description: Test to ensure property support exists
- * Driver requirement: i915, xe
- * Test category: functionality test
- * Functionality: kms_core
- * Mega feature: General Display Features
- */
static void
test_basic(int fd)
{
@@ -282,24 +302,6 @@ test_basic(int fd)
igt_assert_eq(destroy_prop(fd, prop_id), 0);
}
-/**
- * SUBTEST: invalid-%s-%s
- * Description: Tests error handling when invalid properties are %ar[1] with %arg[2].
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @get: fetched
- * @set: set
- *
- * arg[2]:
- *
- * @prop: blob object type
- * @prop-any: object of any type
- */
static void prop_tests(int fd)
{
struct drm_mode_obj_get_properties get_props = {};
diff --git a/tests/kms_properties.c b/tests/kms_properties.c
index 328436622..28c3593e5 100644
--- a/tests/kms_properties.c
+++ b/tests/kms_properties.c
@@ -21,6 +21,12 @@
* IN THE SOFTWARE.
*/
+/**
+ * TEST: kms properties
+ * Category: Display
+ * Description: Test to validate the properties of all planes, crtc and connectors
+ */
+
#include "igt.h"
#include "drmtest.h"
#include <errno.h>
@@ -28,11 +34,8 @@
#include <stdio.h>
#include <string.h>
#include <time.h>
+
/**
- * TEST: kms properties
- * Category: Display
- * Description: Test to validate the properties of all planes, crtc and connectors
- *
* SUBTEST: %s-properties-%s
* Description: Tests %arg[1] properties with %arg[2] commit
* Driver requirement: i915, xe
@@ -53,6 +56,20 @@
* @legacy: legacy
*/
+/**
+ * SUBTEST: get_properties-sanity-%s
+ * Description: Test validates the properties of all planes, crtc and connectors
+ * with %arg[1] commit
+ * Driver requirement: i915, xe
+ * Functionality: kms_core
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @atomic: atomic
+ * @non-atomic: legacy
+ */
struct additional_test {
const char *name;
@@ -712,20 +729,6 @@ static void expect_no_props(int fd, uint32_t obj_type, uint32_t obj_id)
igt_assert_neq(drmIoctl(fd, DRM_IOCTL_MODE_OBJ_GETPROPERTIES, &properties), 0);
}
-/**
- * SUBTEST: get_properties-sanity-%s
- * Description: Test validates the properties of all planes, crtc and connectors
- * with %arg[1] commit
- * Driver requirement: i915, xe
- * Functionality: kms_core
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @atomic: atomic
- * @non-atomic: legacy
- */
static void get_prop_sanity(igt_display_t *display, bool atomic)
{
int fd = display->drm_fd;
diff --git a/tests/kms_rmfb.c b/tests/kms_rmfb.c
index 6c6cdffba..5b4151e85 100644
--- a/tests/kms_rmfb.c
+++ b/tests/kms_rmfb.c
@@ -21,6 +21,13 @@
* IN THE SOFTWARE.
*/
+/**
+ * TEST: kms rmfb
+ * Category: Display
+ * Description: This tests rmfb and close-fd behavior. In these casesthe
+ * framebuffers should be removed from the crtc.
+ */
+
#include "igt.h"
#include "drmtest.h"
#include <errno.h>
@@ -28,12 +35,8 @@
#include <stdio.h>
#include <string.h>
#include <time.h>
+
/**
- * TEST: kms rmfb
- * Category: Display
- * Description: This tests rmfb and close-fd behavior. In these casesthe
- * framebuffers should be removed from the crtc.
- *
* SUBTEST: close-fd
* Description: RMFB is supposed to free the framebuffers from any and all planes
* so test this and make sure it works with fd close and reopen.
diff --git a/tests/kms_rotation_crc.c b/tests/kms_rotation_crc.c
index c48e0d672..3e7016e56 100644
--- a/tests/kms_rotation_crc.c
+++ b/tests/kms_rotation_crc.c
@@ -27,10 +27,130 @@
* Category: Display
* Description: Tests different rotations with different planes & formats
*/
+
#include "igt.h"
#include "igt_vec.h"
#include <math.h>
+/**
+ * SUBTEST: %s-rotation-180
+ * Description: Rotation test with 180 degree for %arg[1] planes
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @primary: primary
+ * @sprite: sprite
+ * @cursor: cursor
+ */
+
+/**
+ * SUBTEST: %s-rotation-%d
+ * Description: Rotation test with %arg[2] degree for %arg[1] planes of gen9+
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @primary: primary
+ * @sprite: sprite
+ *
+ * arg[2].values: 90, 270
+ */
+
+/**
+ * SUBTEST: bad-pixel-format
+ * Description: Checking unsupported pixel format for gen9+ with 90 degree of rotation
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: bad-tiling
+ * Description: Checking unsupported tiling for gen9+ with 90 degree of rotation
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
+/**
+ * SUBTEST: primary-%s-tiled-reflect-x-%d
+ * Description: Test for %arg[1] & %arg[2] degree rotation on primary plane
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @4: 4 tiling
+ * @x: x tiling
+ * @y: y tiling
+ * @yf: yf tiling
+ *
+ * arg[2].values: 0, 180
+ */
+
+/**
+ * SUBTEST: primary-%s-tiled-reflect-x-%d
+ * Description: Test for %arg[1] & %arg[2] degree rotation on primary plane
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation, tiling
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @y: y tiling
+ * @yf: yf tiling
+ *
+ * arg[2].values: 90, 270
+ *
+ * SUBTEST: sprite-rotation-90-pos-100-0
+ * Description: Rotation test with 90 degree for a plane of gen9+ with given position
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
+/**
+ * SUBTEST: multiplane-rotation
+ * Description: Rotation test on both planes by making them fully visible
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * SUBTEST: multiplane-rotation-cropping-%s
+ * Description: Rotation test on both planes by cropping left/%arg[1] corner of
+ * primary plane and right/%arg[1] corner of sprite plane
+ * Driver requirement: i915, xe
+ * Functionality: plane, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @bottom: bottom
+ * @top: top
+ */
+
+/**
+ * SUBTEST: exhaust-fences
+ * Description: This test intends to check for fence leaks exhaustively
+ * Driver requirement: i915
+ * Functionality: plane, rotation
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
#define MAX_FENCES 32
#define MAXMULTIPLANESAMOUNT 2
#define TEST_MAX_WIDTH 640
@@ -479,93 +599,6 @@ static bool test_format(data_t *data,
return true;
}
-/**
- * SUBTEST: %s-rotation-180
- * Description: Rotation test with 180 degree for %arg[1] planes
- * Driver requirement: i915, xe
- * Functionality: plane, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @primary: primary
- * @sprite: sprite
- * @cursor: cursor
- */
-
-/**
- * SUBTEST: %s-rotation-%d
- * Description: Rotation test with %arg[2] degree for %arg[1] planes of gen9+
- * Driver requirement: i915, xe
- * Functionality: plane, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @primary: primary
- * @sprite: sprite
- *
- * arg[2].values: 90, 270
- */
-
-/**
- * SUBTEST: bad-pixel-format
- * Description: Checking unsupported pixel format for gen9+ with 90 degree of rotation
- * Driver requirement: i915, xe
- * Functionality: plane, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: bad-tiling
- * Description: Checking unsupported tiling for gen9+ with 90 degree of rotation
- * Driver requirement: i915, xe
- * Functionality: plane, rotation, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- */
-
-/**
- * SUBTEST: primary-%s-tiled-reflect-x-%d
- * Description: Test for %arg[1] & %arg[2] degree rotation on primary plane
- * Driver requirement: i915, xe
- * Functionality: plane, rotation, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @4: 4 tiling
- * @x: x tiling
- * @y: y tiling
- * @yf: yf tiling
- *
- * arg[2].values: 0, 180
- */
-
-/**
- * SUBTEST: primary-%s-tiled-reflect-x-%d
- * Description: Test for %arg[1] & %arg[2] degree rotation on primary plane
- * Driver requirement: i915, xe
- * Functionality: plane, rotation, tiling
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @y: y tiling
- * @yf: yf tiling
- *
- * arg[2].values: 90, 270
- *
- * SUBTEST: sprite-rotation-90-pos-100-0
- * Description: Rotation test with 90 degree for a plane of gen9+ with given position
- * Driver requirement: i915, xe
- * Functionality: plane, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_plane_rotation(data_t *data, int plane_type, bool test_bad_format)
{
igt_display_t *display = &data->display;
@@ -885,28 +918,6 @@ static bool reusecrcfromlastround(planeinfos p[2], int lastroundp1format,
return true;
}
-/**
- * SUBTEST: multiplane-rotation
- * Description: Rotation test on both planes by making them fully visible
- * Driver requirement: i915, xe
- * Functionality: plane, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * SUBTEST: multiplane-rotation-cropping-%s
- * Description: Rotation test on both planes by cropping left/%arg[1] corner of
- * primary plane and right/%arg[1] corner of sprite plane
- * Driver requirement: i915, xe
- * Functionality: plane, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @bottom: bottom
- * @top: top
- */
-
/*
* Here is pipe parameter which is now used only for first pipe.
* It is left here if this test ever was wanted to be run on
@@ -1104,14 +1115,6 @@ static void test_multi_plane_rotation(data_t *data, enum pipe pipe)
igt_require_f(found, "No valid pipe/output combo found.\n");
}
-/**
- * SUBTEST: exhaust-fences
- * Description: This test intends to check for fence leaks exhaustively
- * Driver requirement: i915
- * Functionality: plane, rotation
- * Mega feature: General Display Features
- * Test category: functionality test
- */
static void test_plane_rotation_exhaust_fences(data_t *data,
enum pipe pipe,
igt_output_t *output,
diff --git a/tests/kms_scaling_modes.c b/tests/kms_scaling_modes.c
index c1a8f5c60..eb14deb25 100644
--- a/tests/kms_scaling_modes.c
+++ b/tests/kms_scaling_modes.c
@@ -24,12 +24,15 @@
* Swati Sharma <swati2.sharma at intel.com>
*/
-#include "igt.h"
/**
* TEST: kms scaling modes
* Category: Display
* Description: Test display scaling modes
- *
+ */
+
+#include "igt.h"
+
+/**
* SUBTEST: scaling-mode-%s
* Description: Tests %arg[1] display scaling mode
* Driver requirement: i915, xe
diff --git a/tests/kms_selftest.c b/tests/kms_selftest.c
index 080ffdf2c..b6564b31a 100644
--- a/tests/kms_selftest.c
+++ b/tests/kms_selftest.c
@@ -21,13 +21,16 @@
* IN THE SOFTWARE.
*/
-#include "igt.h"
-#include "igt_kmod.h"
/**
* TEST: kms selftest
* Category: Display
* Description: Basic sanity check of KMS selftests.
- *
+ */
+
+#include "igt.h"
+#include "igt_kmod.h"
+
+/**
* SUBTEST: %s
* Description: Basic sanity check of KMS selftest %arg[1].
* Driver requirement: i915, xe
diff --git a/tests/kms_sequence.c b/tests/kms_sequence.c
index 6716d3860..f03be4c7c 100644
--- a/tests/kms_sequence.c
+++ b/tests/kms_sequence.c
@@ -27,6 +27,7 @@
* Category: Display
* Description: Test CrtcGetSequence and CrtcQueueSequence.
*/
+
#include "igt.h"
#include <stdlib.h>
#include <stdio.h>
@@ -42,6 +43,36 @@
#include <drm.h>
+/**
+ * SUBTEST: get-%s
+ * Description: This is a test of drmCrtcGetSequence with %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @busy: busy
+ * @forked: forked bo
+ * @forked-busy: forked bo & busy
+ * @idle: idle
+ */
+
+/**
+ * SUBTEST: queue-%s
+ * Description: This is a test of drmCrtcQueueSequence with %arg[1]
+ * Driver requirement: i915, xe
+ * Functionality: vblank
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ *
+ * arg[1]:
+ *
+ * @busy: busy
+ * @idle: idle
+ */
+
IGT_TEST_DESCRIPTION("Test CrtcGetSequence and CrtcQueueSequence.");
typedef struct {
@@ -136,35 +167,6 @@ static int crtc_queue_sequence(int fd, struct drm_crtc_queue_sequence *cqs)
return err;
}
-/**
- * SUBTEST: get-%s
- * Description: This is a test of drmCrtcGetSequence with %arg[1]
- * Driver requirement: i915, xe
- * Functionality: vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @busy: busy
- * @forked: forked bo
- * @forked-busy: forked bo & busy
- * @idle: idle
- */
-
-/**
- * SUBTEST: queue-%s
- * Description: This is a test of drmCrtcQueueSequence with %arg[1]
- * Driver requirement: i915, xe
- * Functionality: vblank
- * Mega feature: General Display Features
- * Test category: functionality test
- *
- * arg[1]:
- *
- * @busy: busy
- * @idle: idle
- */
static void run_test(data_t *data, int fd, void (*testfunc)(data_t *, int, int))
{
int nchildren =
diff --git a/tests/kms_setmode.c b/tests/kms_setmode.c
index 5fc4421c0..aae7ed06e 100644
--- a/tests/kms_setmode.c
+++ b/tests/kms_setmode.c
@@ -20,6 +20,14 @@
* Authors:
* Imre Deak <imre.deak at intel.com>
*/
+
+/**
+ * TEST: kms setmode
+ * Category: Display
+ * Description: Tests the mode by iterating through all valid/invalid crtc/connector
+ * combinations
+ */
+
#include "config.h"
#include "igt.h"
@@ -31,12 +39,8 @@
#include <sys/time.h>
#include <math.h>
#include "xe/xe_query.h"
+
/**
- * TEST: kms setmode
- * Category: Display
- * Description: Tests the mode by iterating through all valid/invalid crtc/connector
- * combinations
- *
* SUBTEST: basic
* Description: Tests the vblank timing by iterating through all valid crtc/connector
* combinations
diff --git a/tests/kms_sysfs_edid_timing.c b/tests/kms_sysfs_edid_timing.c
index ee47a024e..b36f383e5 100644
--- a/tests/kms_sysfs_edid_timing.c
+++ b/tests/kms_sysfs_edid_timing.c
@@ -20,16 +20,20 @@
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
+
+/**
+ * TEST: kms sysfs edid timing
+ * Category: Display
+ * Description: Test to check the time it takes to reprobe each connector.
+ */
+
#include "igt.h"
#include <dirent.h>
#include <fcntl.h>
#include <sys/stat.h>
+
/**
- * TEST: kms sysfs edid timing
- * Category: Display
- * Description: Test to check the time it takes to reprobe each connector.
- *
* SUBTEST:
* Description: This test checks the time it takes to reprobe each connector and
* fails if either the time it takes for one reprobe is too long or
diff --git a/tests/kms_tiled_display.c b/tests/kms_tiled_display.c
index 519c3754c..ba6323c1e 100644
--- a/tests/kms_tiled_display.c
+++ b/tests/kms_tiled_display.c
@@ -41,6 +41,7 @@
* Category: Display
* Description: Test for Transcoder Port Sync for Display Port Tiled Displays
*/
+
#include "igt.h"
#include "poll.h"
#include "drm_mode.h"
diff --git a/tests/kms_tv_load_detect.c b/tests/kms_tv_load_detect.c
index 67dbb242e..13394f2c6 100644
--- a/tests/kms_tv_load_detect.c
+++ b/tests/kms_tv_load_detect.c
@@ -22,12 +22,15 @@
*
*/
-#include "igt.h"
/**
* TEST: kms tv load detect
* Category: Display
* Description: Test to check tv load detection.
- *
+ */
+
+#include "igt.h"
+
+/**
* SUBTEST: load-detect
* Description: Check tv load detection works correctly.
* Driver requirement: i915, xe
diff --git a/tests/kms_universal_plane.c b/tests/kms_universal_plane.c
index 2e8c0cc17..4a2a0ae55 100644
--- a/tests/kms_universal_plane.c
+++ b/tests/kms_universal_plane.c
@@ -21,6 +21,12 @@
* IN THE SOFTWARE.
*/
+/**
+ * TEST: kms universal plane
+ * Category: Display
+ * Description: Check pageflip & modeset on universal plane
+ */
+
#include "igt.h"
#include <errno.h>
#include <stdbool.h>
@@ -29,10 +35,6 @@
#include <fcntl.h>
/**
- * TEST: kms universal plane
- * Category: Display
- * Description: Check pageflip & modeset on universal plane
- *
* SUBTEST: cursor-fb-leak
* Description: Check for cursor leaks after performing cursor operations
* Driver requirement: i915, xe
@@ -54,9 +56,7 @@
* Functionality: plane
* Mega feature: General Display Features
* Test category: functionality test
- */
-
-/**
+ *
* SUBTEST: universal-plane-%s
* Description: Check %arg[1]
* Driver requirement: i915, xe
diff --git a/tests/kms_vblank.c b/tests/kms_vblank.c
index 25b17b25c..3698726de 100644
--- a/tests/kms_vblank.c
+++ b/tests/kms_vblank.c
@@ -21,6 +21,12 @@
* IN THE SOFTWARE.
*/
+/**
+ * TEST: kms vblank
+ * Category: Display
+ * Description: Test speed of WaitVblank.
+ */
+
#include "igt.h"
#include <stdlib.h>
#include <stdio.h>
@@ -35,11 +41,8 @@
#include <sys/wait.h>
#include <drm.h>
+
/**
- * TEST: kms vblank
- * Category: Display
- * Description: Test speed of WaitVblank.
- *
* SUBTEST: crtc-id
* Description: Check the vblank and flip events works with given crtc id
* Driver requirement: i915, xe
@@ -53,9 +56,7 @@
* Functionality: vblank
* Mega feature: General Display Features
* Test category: functionality test
- */
-
-/**
+ *
* SUBTEST: ts-continuation-dpms-rpm
* Description: Test TS continuty with DPMS & RPM while hanging by introducing
* NOHANG flag
@@ -63,9 +64,7 @@
* Functionality: dpms, hang, rpm, vblank
* Mega feature: General Display Features
* Test category: functionality test
- */
-
-/**
+ *
* SUBTEST: ts-continuation-dpms-suspend
* Description: Test TS continuty with DPMS & Suspend while hanging by introducing
* NOHANG flag
@@ -73,9 +72,7 @@
* Functionality: dpms, hang, suspend, vblank
* Mega feature: General Display Features
* Test category: functionality test
- */
-
-/**
+ *
* SUBTEST: ts-continuation-suspend
* Description: Test TS continuty with Suspend while hanging by introducing NOHANG
* flag
@@ -83,9 +80,7 @@
* Functionality: hang, suspend, vblank
* Mega feature: General Display Features
* Test category: functionality test
- */
-
-/**
+ *
* SUBTEST: ts-continuation-modeset-rpm
* Description: Test TS continuty during Modeset with Suspend while hanging by
* introducing NOHANG flag
@@ -93,9 +88,7 @@
* Functionality: hang, rpm, vblank
* Mega feature: General Display Features
* Test category: functionality test
- */
-
-/**
+ *
* SUBTEST: accuracy-idle
* Description: Test Accuracy of vblank events while hanging by introducing NOHANG
* flag
diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
index e203fd4d5..46ab817e9 100644
--- a/tests/kms_vrr.c
+++ b/tests/kms_vrr.c
@@ -20,15 +20,18 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+/**
+ * TEST: kms vrr
+ * Category: Display
+ * Description: Test to validate diffent features of VRR
+ */
+
#include "igt.h"
#include "sw_sync.h"
#include <fcntl.h>
#include <signal.h>
+
/**
- * TEST: kms vrr
- * Category: Display
- * Description: Test to validate diffent features of VRR
- *
* SUBTEST: flip-basic
* Description: Tests that VRR is enabled and that the difference between flip
* timestamps converges to the requested rate
diff --git a/tests/kms_writeback.c b/tests/kms_writeback.c
index 25b49eccd..6b436b7ab 100644
--- a/tests/kms_writeback.c
+++ b/tests/kms_writeback.c
@@ -22,6 +22,15 @@
*
*/
+/**
+ * TEST: kms writeback
+ * Category: Display
+ * Description: This test validates the expected behavior of the writeback
+ * connectors feature by checking if the target device support
+ * writeback; it validates bad and good combination, check color
+ * format, and check the output result by using CRC.
+ */
+
#include <errno.h>
#include <stdbool.h>
#include <stdio.h>
@@ -32,14 +41,8 @@
#include "igt_core.h"
#include "igt_fb.h"
#include "sw_sync.h"
+
/**
- * TEST: kms writeback
- * Category: Display
- * Description: This test validates the expected behavior of the writeback
- * connectors feature by checking if the target device support
- * writeback; it validates bad and good combination, check color
- * format, and check the output result by using CRC.
- *
* SUBTEST: writeback-check-output-XRGB2101010
* Description: Check XRGB2101010 writeback output with CRC validation
* Functionality: kms_core
diff --git a/tests/testdisplay.c b/tests/testdisplay.c
index 42218210f..109ed496a 100644
--- a/tests/testdisplay.c
+++ b/tests/testdisplay.c
@@ -45,6 +45,13 @@
* - DP commands (e.g. poweroff)
* - verify outputs against VBT/physical connectors
*/
+
+/**
+ * TEST: testdisplay
+ * Category: Display
+ * Description: Tests basic display functionality.
+ */
+
#include "config.h"
#include "igt.h"
@@ -70,10 +77,6 @@
#include <signal.h>
/**
- * TEST: testdisplay
- * Category: Display
- * Description: Tests basic display functionality.
- *
* SUBTEST:
* Description: This test is intended for testing of display functionality like
* modeset, clone modes, test patterns & pixel generators etc..
@@ -82,6 +85,7 @@
* Mega feature: General Display Features
* Test category: functionality test
*/
+
IGT_TEST_DESCRIPTION("Tests basic display functionality.");
enum {
--
2.40.0
More information about the igt-dev
mailing list