[igt-dev] [i-g-t V5 2/5] tests/i915/kms_fb_coherency: Add XE support
Sharma, Swati2
swati2.sharma at intel.com
Thu Oct 26 06:37:27 UTC 2023
Hi Bhanu,
Sorry, ignore my comment. I thought its subtest. That comment is valid
at subtest level, since it is dynamic subtest we can go with your approach.
Patch LGTM
Reviewed-by: Swati Sharma <swati2.sharma at intel.com>
On 26-Oct-23 10:53 AM, Sharma, Swati2 wrote:
> Hi Bhanu,
>
> On 25-Oct-23 1:13 PM, Modem, Bhanuprakash wrote:
>> Hi Swati,
>>
>> On Mon-23-10-2023 02:11 pm, Sharma, Swati2 wrote:
>>> Hi Bhanu,
>>>
>>> On 11-Sep-23 12:52 PM, Bhanuprakash Modem wrote:
>>>> Add XE driver support for kms tests. This patch will add a support
>>>> to call the corresponding apis based on the driver (i915/xe)
>>>>
>>>> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
>>>> ---
>>>> tests/intel/kms_fb_coherency.c | 43
>>>> ++++++++++++++++++----------------
>>>> 1 file changed, 23 insertions(+), 20 deletions(-)
>>>>
>>>> diff --git a/tests/intel/kms_fb_coherency.c
>>>> b/tests/intel/kms_fb_coherency.c
>>>> index c772ddcdc..745ffcdd2 100644
>>>> --- a/tests/intel/kms_fb_coherency.c
>>>> +++ b/tests/intel/kms_fb_coherency.c
>>>> @@ -16,6 +16,7 @@
>>>> #include <string.h>
>>>> #include "igt.h"
>>>> +#include "xe/xe_ioctl.h"
>>>> typedef struct {
>>>> int drm_fd;
>>>> @@ -91,7 +92,7 @@ static struct igt_fb *prepare_fb(data_t *data)
>>>> 0, 0, fb->width, fb->height,
>>>> 0, 0, fb->width << 16, fb->height << 16);
>>>> - if (!gem_has_lmem(data->drm_fd)) {
>>>> + if (is_i915_device(data->drm_fd) && !gem_has_lmem(data->drm_fd)) {
>>>> uint32_t caching;
>>>> /* make sure caching mode has become UC/WT */
>>>> @@ -160,7 +161,10 @@ static void test_mmap_offset_wc(data_t *data)
>>>> fb = prepare_fb(data);
>>>> - buf = gem_mmap_offset__wc(data->drm_fd, fb->gem_handle, 0,
>>>> fb->size, PROT_WRITE);
>>>> + if (is_i915_device(data->drm_fd))
>>>> + buf = gem_mmap_offset__wc(data->drm_fd, fb->gem_handle, 0,
>>>> fb->size, PROT_WRITE);
>>>> + else
>>>> + buf = xe_bo_mmap_ext(data->drm_fd, fb->gem_handle,
>>>> fb->size, PROT_WRITE);
>>>> check_buf_crc(data, buf, fb);
>>>> }
>>>> @@ -226,7 +230,7 @@ igt_main
>>>> data_t data;
>>>> igt_fixture {
>>>> - data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
>>>> + data.drm_fd = drm_open_driver_master(DRIVER_INTEL |
>>>> DRIVER_XE);
>>>> data.devid = intel_get_drm_devid(data.drm_fd);
>>>> @@ -251,39 +255,38 @@ igt_main
>>>> * Test category: functionality test
>>>> */
>>>> igt_subtest_with_dynamic("memset-crc") {
>>>> - if (gem_has_mappable_ggtt(data.drm_fd)) {
>>>> + if (igt_draw_supports_method(data.drm_fd,
>>>> IGT_DRAW_MMAP_GTT)) {
>>>> igt_dynamic("mmap-gtt")
>>>> test_mmap_gtt(&data);
>>>> cleanup_crtc(&data);
>>>> }
>>>> - if (gem_mmap_offset__has_wc(data.drm_fd)) {
>>>> + if (igt_draw_supports_method(data.drm_fd, IGT_DRAW_MMAP_WC)) {
>>>> igt_dynamic("mmap-offset-wc")
>>>> test_mmap_offset_wc(&data);
>>>> cleanup_crtc(&data);
>>>> }
>>>> - if (gem_has_lmem(data.drm_fd)) {
>>>> - igt_dynamic("mmap-offset-fixed")
>>>> - test_mmap_offset_fixed(&data);
>>>> + if (is_i915_device(data.drm_fd)) {
>>>
>>> Instead of using if (is_i915_device()), can we use
>>> igt_require_i915(data.drm_fd) instead if these subtests are
>>> executable on i915 driver only?
>>
>> No, we can't use igt_require_i915() here.
>>
>> For XE device, IGT will always throw a SKIP after the execution of
>> "mmap-offset-wc".
>>
>> BTW, we can't use igt_fixture inside igt_subtest_*().
>>
>> - Bhanu
>
> IMO its better to list the subtest to have mapping b/w i915 and xe which
> will help in validation matrix.
> If we need to go with above approach only, i guess we need to change
> other IGTs too like kms_pm_lpsp, kms_addfb_basic,
> kms_force_connector_basic, etc. to not list xe specific subtests.
>
>>
>>>
>>>> + if (gem_has_lmem(data.drm_fd)) {
>>>> + igt_dynamic("mmap-offset-fixed")
>>>> + test_mmap_offset_fixed(&data);
>>>> + } else if (gem_has_mmap_offset(data.drm_fd)) {
>>>> + igt_dynamic("mmap-offset-uc")
>>>> + test_mmap_offset_uc(&data);
>>>> + }
>>>> cleanup_crtc(&data);
>>>> - } else if (gem_has_mmap_offset(data.drm_fd)) {
>>>> - igt_dynamic("mmap-offset-uc")
>>>> - test_mmap_offset_uc(&data);
>>>> + if (gem_has_legacy_mmap(data.drm_fd) &&
>>>> + gem_mmap__has_wc(data.drm_fd)) {
>>>> + igt_dynamic("mmap-legacy-wc")
>>>> + test_legacy_mmap_wc(&data);
>>>> - cleanup_crtc(&data);
>>>> - }
>>>> -
>>>> - if (gem_has_legacy_mmap(data.drm_fd) &&
>>>> - gem_mmap__has_wc(data.drm_fd)) {
>>>> - igt_dynamic("mmap-legacy-wc")
>>>> - test_legacy_mmap_wc(&data);
>>>> -
>>>> - cleanup_crtc(&data);
>>>> + cleanup_crtc(&data);
>>>> + }
>>>> }
>>>> }
More information about the igt-dev
mailing list