[igt-dev] [PATCH i-g-t] tests/kms_setmode: skip subtest when valid combination not found

[Jeevan B]

Skip subtest with a valid message instead of "No dynamic tests executed"
when valid crtc-connector combination is not available.

Signed-off-by: Jeevan B <jeevan.b at intel.com>
---
 tests/kms_setmode.c | 64 ++++++++++++++++++++++-----------------------
 1 file changed, 32 insertions(+), 32 deletions(-)

diff --git a/tests/kms_setmode.c b/tests/kms_setmode.c
index a611d938..74292abf 100644
--- a/tests/kms_setmode.c
+++ b/tests/kms_setmode.c
@@ -645,47 +645,47 @@ static void test_one_combination(const struct test_config *tconf,
 				 int connector_count)
 {
 	struct crtc_config crtcs[MAX_CRTCS];
-	int crtc_count;
+	int crtc_count, i, pos = 0;
+	char test_name[256];
 	bool config_valid;
 
 	setup_crtcs(tconf, cconfs, connector_count, crtcs,
 		    &crtc_count, &config_valid);
 
-	if (config_valid == !(tconf->flags & TEST_INVALID)) {
-		int i, pos = 0;
-		char test_name[256];
-
-		for (i = 0; i < crtc_count; i++) {
-			if (i > 0)
-				pos += snprintf(&test_name[pos], ARRAY_SIZE(test_name) - pos, "-");
-			pos += get_test_name_str(&crtcs[i], &test_name[pos], ARRAY_SIZE(test_name) - pos);
-		}
+	for (i = 0; i < crtc_count; i++) {
+		if (i > 0)
+			pos += snprintf(&test_name[pos], ARRAY_SIZE(test_name) - pos, "-");
+		pos += get_test_name_str(&crtcs[i], &test_name[pos], ARRAY_SIZE(test_name) - pos);
+	}
 
-		for (i = 0; i < crtc_count; i++) {
-			struct crtc_config *crtc = &crtcs[i];
-
-			/*
-			 * if mode.hdisplay > 5120, then ignore
-			 *   - last crtc in single/multi-connector config
-			 *   - consecutive crtcs in multi-connector config
-			 *
-			 * in multi-connector config ignore if
-			 *   - previous crtc mode.hdisplay > 5120 and
-			 *   - current & previous crtcs are consecutive
-			 */
-			if (((crtc->mode.hdisplay > MAX_HDISPLAY_PER_CRTC) &&
-			     ((crtc->crtc_idx >= (tconf->resources->count_crtcs - 1)) ||
-			      ((i < (crtc_count - 1)) && (abs(crtcs[i + 1].crtc_idx - crtc->crtc_idx) <= 1)))) ||
-			    ((i > 0) && (crtc[i - 1].mode.hdisplay > MAX_HDISPLAY_PER_CRTC) &&
-			     (abs(crtc->crtc_idx - crtcs[i - 1].crtc_idx) <= 1))) {
-				igt_info("Combo: %s is not possible with selected mode(s).\n", test_name);
-				goto out;
+	igt_dynamic_f("%s", test_name)
+		if (config_valid == !(tconf->flags & TEST_INVALID)) {
+
+			for (i = 0; i < crtc_count; i++) {
+				struct crtc_config *crtc = &crtcs[i];
+
+				/*
+				 * if mode.hdisplay > 5120, then ignore
+				 *   - last crtc in single/multi-connector config
+				 *   - consecutive crtcs in multi-connector config
+				 *
+				 * in multi-connector config ignore if
+				 *   - previous crtc mode.hdisplay > 5120 and
+				 *   - current & previous crtcs are consecutive
+				 */
+				if (((crtc->mode.hdisplay > MAX_HDISPLAY_PER_CRTC) &&
+				     ((crtc->crtc_idx >= (tconf->resources->count_crtcs - 1)) ||
+				      ((i < (crtc_count - 1)) && (abs(crtcs[i + 1].crtc_idx - crtc->crtc_idx) <= 1)))) ||
+				    ((i > 0) && (crtc[i - 1].mode.hdisplay > MAX_HDISPLAY_PER_CRTC) &&
+				     (abs(crtc->crtc_idx - crtcs[i - 1].crtc_idx) <= 1))) {
+					igt_info("Combo: %s is not possible with selected mode(s).\n", test_name);
+					goto out;
+				}
 			}
-		}
 
-		igt_dynamic_f("%s", test_name)
 			test_crtc_config(tconf, crtcs, crtc_count);
-	}
+		} else
+			igt_skip("Valid connector-crtc combination not found\n");
 
 out:
 	cleanup_crtcs(crtcs, crtc_count);
-- 
2.34.1