[PATCH i-g-t 5/5] tests/kms: Use lib helper to check the pipe/output combo validity
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Mon Apr 8 06:12:21 UTC 2024
Use IGT lib helper intel_pipe_output_combo_valid() to make sure the
selected pipe/output/mode combo is valid.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/kms_dither.c | 24 +++++++------
tests/kms_hdr.c | 90 ++++++++++++++++++++++++++--------------------
2 files changed, 65 insertions(+), 49 deletions(-)
diff --git a/tests/kms_dither.c b/tests/kms_dither.c
index af7b7f05c..21b1210b4 100644
--- a/tests/kms_dither.c
+++ b/tests/kms_dither.c
@@ -76,13 +76,10 @@ typedef struct {
/* Prepare test data. */
static void prepare_test(data_t *data, igt_output_t *output, enum pipe p)
{
- igt_display_t *display = &data->display;
igt_pipe_t *pipe = &data->display.pipes[p];
igt_assert(pipe);
- igt_display_reset(display);
-
data->primary =
igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
@@ -205,6 +202,8 @@ run_dither_test(data_t *data, int fb_bpc, int fb_format, int output_bpc)
igt_output_t *output;
igt_display_t *display = &data->display;
+ igt_display_reset(display);
+
for_each_connected_output(display, output) {
enum pipe pipe;
@@ -215,15 +214,20 @@ run_dither_test(data_t *data, int fb_bpc, int fb_format, int output_bpc)
continue;
for_each_pipe(display, pipe) {
- if (igt_pipe_connector_valid(pipe, output)) {
- igt_dynamic_f("pipe-%s-%s",
- kmstest_pipe_name(pipe), output->name)
- test_dithering(data, pipe, output, fb_bpc,
- fb_format, output_bpc);
+ igt_output_set_pipe(output, pipe);
- /* One pipe is enough */
- break;
+ if (!intel_pipe_output_combo_valid(display)) {
+ igt_output_set_pipe(output, PIPE_NONE);
+ continue;
}
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe), output->name)
+ test_dithering(data, pipe, output, fb_bpc,
+ fb_format, output_bpc);
+
+ /* One pipe is enough */
+ break;
}
}
}
diff --git a/tests/kms_hdr.c b/tests/kms_hdr.c
index 99b78f7ef..475463c21 100644
--- a/tests/kms_hdr.c
+++ b/tests/kms_hdr.c
@@ -261,6 +261,8 @@ static void test_bpc_switch(data_t *data, uint32_t flags)
igt_display_t *display = &data->display;
igt_output_t *output;
+ igt_display_reset(display);
+
for_each_connected_output(display, output) {
enum pipe pipe;
@@ -271,26 +273,30 @@ static void test_bpc_switch(data_t *data, uint32_t flags)
continue;
for_each_pipe(display, pipe) {
- if (igt_pipe_connector_valid(pipe, output)) {
- prepare_test(data, output, pipe);
-
- if (is_intel_device(data->fd) &&
- !igt_max_bpc_constraint(display, pipe, output, 10)) {
- test_fini(data);
- break;
- }
-
- data->mode = igt_output_get_mode(output);
- data->w = data->mode->hdisplay;
- data->h = data->mode->vdisplay;
+ igt_output_set_pipe(output, pipe);
+ if (intel_pipe_output_combo_valid(display)) {
+ igt_output_set_pipe(output, PIPE_NONE);
+ continue;
+ }
- igt_dynamic_f("pipe-%s-%s",
- kmstest_pipe_name(pipe), output->name)
- test_bpc_switch_on_output(data, pipe, output, flags);
+ prepare_test(data, output, pipe);
- /* One pipe is enough */
+ if (is_intel_device(data->fd) &&
+ !igt_max_bpc_constraint(display, pipe, output, 10)) {
+ test_fini(data);
break;
}
+
+ data->mode = igt_output_get_mode(output);
+ data->w = data->mode->hdisplay;
+ data->h = data->mode->vdisplay;
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe), output->name)
+ test_bpc_switch_on_output(data, pipe, output, flags);
+
+ /* One pipe is enough */
+ break;
}
}
}
@@ -614,6 +620,8 @@ static void test_hdr(data_t *data, uint32_t flags)
igt_display_t *display = &data->display;
igt_output_t *output;
+ igt_display_reset(display);
+
for_each_connected_output(display, output) {
enum pipe pipe;
@@ -635,32 +643,36 @@ static void test_hdr(data_t *data, uint32_t flags)
continue;
for_each_pipe(display, pipe) {
- if (igt_pipe_connector_valid(pipe, output)) {
- prepare_test(data, output, pipe);
+ igt_output_set_pipe(output, pipe);
+ if (!intel_pipe_output_combo_valid(display)) {
+ igt_output_set_pipe(output, PIPE_NONE);
+ continue;
+ }
- if (is_intel_device(data->fd) &&
- !igt_max_bpc_constraint(display, pipe, output, 10)) {
- test_fini(data);
- break;
- }
-
- data->mode = igt_output_get_mode(output);
- data->w = data->mode->hdisplay;
- data->h = data->mode->vdisplay;
-
- igt_dynamic_f("pipe-%s-%s",
- kmstest_pipe_name(pipe), output->name) {
- if (flags & (TEST_NONE | TEST_DPMS | TEST_SUSPEND | TEST_INVALID_HDR))
- test_static_toggle(data, pipe, output, flags);
- if (flags & TEST_SWAP)
- test_static_swap(data, pipe, output);
- if (flags & TEST_INVALID_METADATA_SIZES)
- test_invalid_metadata_sizes(data, output);
- }
-
- /* One pipe is enough */
+ prepare_test(data, output, pipe);
+
+ if (is_intel_device(data->fd) &&
+ !igt_max_bpc_constraint(display, pipe, output, 10)) {
+ test_fini(data);
break;
}
+
+ data->mode = igt_output_get_mode(output);
+ data->w = data->mode->hdisplay;
+ data->h = data->mode->vdisplay;
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe), output->name) {
+ if (flags & (TEST_NONE | TEST_DPMS | TEST_SUSPEND | TEST_INVALID_HDR))
+ test_static_toggle(data, pipe, output, flags);
+ if (flags & TEST_SWAP)
+ test_static_swap(data, pipe, output);
+ if (flags & TEST_INVALID_METADATA_SIZES)
+ test_invalid_metadata_sizes(data, output);
+ }
+
+ /* One pipe is enough */
+ break;
}
}
}
--
2.43.2
More information about the igt-dev
mailing list