[PATCH v3 1/2] tests/kms_vrr: Add a subtest for seamless modeset to a virtual LRR mode

Manasi Navare navaremanasi at chromium.org
Thu Apr 25 15:20:49 UTC 2024


Hi Bhanu,

Thanks for the review.
This is not specific to edp, it applies to all connectors.

If the BAT results look okay and I have your r-b, could we get this merged?

Regards
Manasi

On Thu, Apr 25, 2024 at 12:39 AM Modem, Bhanuprakash
<bhanuprakash.modem at intel.com> wrote:
>
> Hi Manasi,
>
> On 25-04-2024 01:43 am, Manasi Navare wrote:
> > This subtest validates LRR fastset functionality by testing seamless switching
> > without full modeset to any of the virtual LRR mode within VRR range.
> > Here we start from highest refresh rate mode and then switch to virtual LRR
> > modes in the steps of 10Hz within the VRR range.
> >
> > This is used to test the LRR fastset functionality of the driver.
> >
> > v5:
> > - Pass a reference to flip_and_measure (bhanu)
> > - Add a new line between between declaration and code logic
> >
> > v4:
> > - Change the test name to align with drrs/vrr tests (Bhanu)
> > - Fix some build warnings due to rebase
> > - Use a local virtual_mode variable
> >
> > v3:
> > - Fix build error due to rebase (Manasi)
> >
> > Cc: Drew Davenport <ddavenport at chromium.org>
> > Cc: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Sean Paul <seanpaul at chromium.org>
> > Signed-off-by: Manasi Navare <navaremanasi at chromium.org>
> > ---
> >   tests/kms_vrr.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++---
> >   1 file changed, 69 insertions(+), 4 deletions(-)
> >
> > diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
> > index 15c62b34b..7f64d6806 100644
> > --- a/tests/kms_vrr.c
> > +++ b/tests/kms_vrr.c
> > @@ -66,6 +66,11 @@
> >    * Description: Test to switch RR seamlessly without modeset.
> >    * Functionality: adaptive_sync, drrs
> >    *
> > + * SUBTEST: seamless-rr-switch-virtual
> > + * Description: Test to create a Virtual Mode in VRR range and switch to it
> > + *           without a full modeset.
> > + * Functionality: LRR
> > + *
> >    * SUBTEST: max-min
> >    * Description: Oscillates between highest and lowest refresh each frame for
> >    *              manual flicker profiling
> > @@ -89,9 +94,10 @@ enum {
> >       TEST_FLIPLINE = 1 << 3,
> >       TEST_SEAMLESS_VRR = 1 << 4,
> >       TEST_SEAMLESS_DRRS = 1 << 5,
> > -     TEST_FASTSET = 1 << 6,
> > -     TEST_MAXMIN = 1 << 7,
> > -     TEST_NEGATIVE = 1 << 8,
> > +     TEST_SEAMLESS_VIRTUAL_RR = 1 << 6,
> > +     TEST_FASTSET = 1 << 7,
> > +     TEST_MAXMIN = 1 << 8,
> > +     TEST_NEGATIVE = 1 << 9,
> >   };
> >
> >   enum {
> > @@ -214,6 +220,18 @@ low_rr_mode_with_same_res(igt_output_t *output, unsigned int vrr_min)
> >       return mode;
> >   }
> >
> > +static drmModeModeInfo
> > +virtual_rr_vrr_range_mode(igt_output_t *output, unsigned int virtual_refresh_rate)
> > +{
> > +     drmModeModeInfo mode = *igt_output_get_mode(output);
> > +     uint64_t clock_hz = mode.clock * 1000;
> > +
> > +     mode.vtotal = clock_hz / (mode.htotal * virtual_refresh_rate);
> > +     mode.vrefresh = virtual_refresh_rate;
> > +
> > +     return mode;
> > +}
> > +
> >   /* Read min and max vrr range from the connector debugfs. */
> >   static range_t
> >   get_vrr_range(data_t *data, igt_output_t *output)
> > @@ -641,6 +659,49 @@ test_seamless_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint3
> >                    vrr ? "on" : "off", vrr ? "not reached" : "exceeded", result);
> >   }
> >
> > +static void
> > +test_seamless_virtual_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
> > +{
> > +     uint32_t result;
> > +     unsigned int vrefresh;
> > +     uint64_t rate[] = {0};
> > +
> > +     igt_info("Use HIGH_RR Mode as default\n");
> > +     kmstest_dump_mode(&data->switch_modes[HIGH_RR_MODE]);
> > +
> > +     prepare_test(data, output, pipe);
> > +     rate[0] = rate_from_refresh(data->switch_modes[HIGH_RR_MODE].vrefresh);
> > +
> > +     /*
> > +      * Sink with DRR and VRR can be in downclock mode so
> > +      * switch to highest refresh rate mode.
> > +      */
> > +     igt_output_override_mode(output, &data->switch_modes[HIGH_RR_MODE]);
> > +     igt_assert(igt_display_try_commit_atomic(&data->display, DRM_MODE_PAGE_FLIP_EVENT, NULL) == 0);
> > +
> > +     result = flip_and_measure(data, output, pipe, rate, 1, TEST_DURATION_NS);
> > +     igt_assert_f(result > 75,
> > +                  "Refresh rate (%u Hz) %"PRIu64"ns: Target threshold not reached, result was %u%%\n",
> > +                  data->switch_modes[HIGH_RR_MODE].vrefresh, rate[0], result);
> > +
> > +     /* Switch to Virtual RR */
> > +     for (vrefresh = data->range.min + 10; vrefresh < data->range.max; vrefresh += 10) {
> > +             drmModeModeInfo virtual_mode = virtual_rr_vrr_range_mode(output, vrefresh);
> > +
> > +             igt_info("Requesting Virtual Mode with Refresh Rate (%u Hz): \n", vrefresh);
> > +             kmstest_dump_mode(&virtual_mode);
> > +
> > +             igt_output_override_mode(output, &virtual_mode);
> > +             igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
> > +
> > +             rate[0] = rate_from_refresh(vrefresh);
> > +             result = flip_and_measure(data, output, pipe, rate, 1, TEST_DURATION_NS);
> > +             igt_assert_f(result > 75,
> > +                          "Refresh rate (%u Hz) %"PRIu64"ns: Target threshold not reached, result was %u%%\n",
> > +                          vrefresh, rate[0], result);
> > +     }
> > +}
> > +
> >   static void test_cleanup(data_t *data, enum pipe pipe, igt_output_t *output)
> >   {
> >       if (vrr_capable(output))
> > @@ -686,7 +747,7 @@ static bool output_constraint(data_t *data, igt_output_t *output, uint32_t flags
> >       igt_output_override_mode(output, &data->switch_modes[HIGH_RR_MODE]);
> >
> >       /* Search for a low refresh rate mode. */
> > -     if (!(flags & (TEST_SEAMLESS_VRR | TEST_SEAMLESS_DRRS)))
> > +     if (!(flags & (TEST_SEAMLESS_VRR | TEST_SEAMLESS_DRRS | TEST_SEAMLESS_VIRTUAL_RR)))
>
> Does this virtual RR applicable to eDP only or supports other connector
> types too? If it is eDP specific [*], then we must add a check for that.
>
> [*]:
> https://cgit.freedesktop.org/drm/igt-gpu-tools/tree/tests/kms_vrr.c#n660
>
> With above comment addressed, this patch is
> Reviewed-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
>
> - Bhanu
>
> >               return true;
> >
> >       data->switch_modes[LOW_RR_MODE] = low_rr_mode_with_same_res(output, data->range.min);
> > @@ -841,6 +902,10 @@ igt_main_args("drs:", long_opts, help_str, opt_handler, &data)
> >                            "between flip timestamps converges to the requested rate");
> >               igt_subtest_with_dynamic("flip-basic-fastset")
> >                       run_vrr_test(&data, test_basic, TEST_FASTSET);
> > +
> > +             igt_describe("Test to switch to any custom virtual mode in VRR range without modeset.");
> > +             igt_subtest_with_dynamic("seamless-rr-switch-virtual")
> > +                     run_vrr_test(&data, test_seamless_virtual_rr_basic, TEST_SEAMLESS_VIRTUAL_RR);
> >       }
> >
> >       igt_fixture {


More information about the igt-dev mailing list