[PATCH i-g-t] tests/intel/xe_sriov_flr: Add parallel FLR subtest for SR-IOV VFs
Marcin Bernatowicz
marcin.bernatowicz at linux.intel.com
Tue Dec 3 11:20:18 UTC 2024
Introduce a new subtest flr-vfs-parallel to validate parallel FLR
execution on all VFs. This subtest ensures correct behavior during
simultaneous resets.
Refactor verify_flr to accept an execution strategy function pointer,
allowing for both sequential and parallel FLR strategies.
Update clear_tests to use the new execution strategy approach and
modify existing subtests to utilize the sequential FLR strategy.
v2: Reintroduce condition to reinitialize test data only if more VFs
remain to be tested (omitted when extracting execute_sequential_flr).
Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz at linux.intel.com>
Cc: Adam Miszczak <adam.miszczak at linux.intel.com>
Cc: Jakub Kolakowski <jakub1.kolakowski at intel.com>
Cc: Marcin Bernatowicz <marcin.bernatowicz at linux.intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko at intel.com>
Cc: Michał Winiarski <michal.winiarski at intel.com>
Cc: Narasimha C V <narasimha.c.v at intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski at intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p at intel.com>
Cc: Tomasz Lis <tomasz.lis at intel.com>
---
tests/intel/xe_sriov_flr.c | 120 +++++++++++++++++++++++++++++--------
1 file changed, 96 insertions(+), 24 deletions(-)
diff --git a/tests/intel/xe_sriov_flr.c b/tests/intel/xe_sriov_flr.c
index 550d58bb9..11a8b39d6 100644
--- a/tests/intel/xe_sriov_flr.c
+++ b/tests/intel/xe_sriov_flr.c
@@ -35,6 +35,11 @@
* Description:
* Sequentially performs FLR on each VF to verify isolation and
* clearing of LMEM, GGTT, and SCRATCH_REGS on the reset VF only.
+ *
+ * SUBTEST: flr-vfs-parallel
+ * Run type: FULL
+ * Description:
+ * Executes FLR on all VFs simultaneously to validate correct behavior during parallel resets.
*/
IGT_TEST_DESCRIPTION("Xe tests for SR-IOV VF FLR (Functional Level Reset)");
@@ -210,6 +215,26 @@ static void subchecks_report_results(struct subcheck *checks, int num_checks)
igt_skip_on(skips == num_checks);
}
+/**
+ * flr_exec_strategy - Function pointer for FLR execution strategy
+ * @pf_fd: File descriptor for the Physical Function (PF).
+ * @num_vfs: Total number of Virtual Functions (VFs) to test.
+ * @checks: Array of subchecks.
+ * @num_checks: Number of subchecks.
+ * @wait_flr_ms: Time to wait (in milliseconds) for FLR to complete
+ *
+ * Defines a strategy for executing FLRs (Functional Level Resets)
+ * across multiple VFs. The strategy determines the order and
+ * manner (e.g., sequential or parallel) in which FLRs are performed.
+ * It is expected to initiate FLRs and handle related operations,
+ * such as verifying and preparing subchecks.
+ *
+ * Return: The ID of the last VF for which FLR was successfully initiated.
+ */
+typedef int (*flr_exec_strategy)(int pf_fd, int num_vfs,
+ struct subcheck *checks, int num_checks,
+ const int wait_flr_ms);
+
/**
* verify_flr - Orchestrates the verification of Function Level Reset (FLR)
* across multiple Virtual Functions (VFs).
@@ -222,18 +247,20 @@ static void subchecks_report_results(struct subcheck *checks, int num_checks)
* @num_vfs: Total number of Virtual Functions (VFs) to test.
* @checks: Array of subchecks.
* @num_checks: Number of subchecks.
+ * @flr_exec_strategy: Execution strategy for FLR (e.g., sequential or parallel).
*
* Detailed Workflow:
* - Initializes and prepares VFs for testing.
- * - Iterates through each VF, performing FLR, and verifies that only
- * the reset VF is affected while others remain unchanged.
- * - Reinitializes test data for the FLRed VF if there are more VFs to test.
- * - Continues the process until all VFs are tested.
- * - Handles any test failures or early exits, cleans up, and reports results.
+ * - Executes the FLR operation using the provided execution strategy
+ * (e.g., sequential or parallel) and validates that the reset VF behaves
+ * as expected.
+ * - Cleans up resources and reports results after all VFs have been tested
+ * or in the case of an early exit.
*
* A timeout is used to wait for FLR operations to complete.
*/
-static void verify_flr(int pf_fd, int num_vfs, struct subcheck *checks, int num_checks)
+static void verify_flr(int pf_fd, int num_vfs, struct subcheck *checks,
+ int num_checks, flr_exec_strategy exec_strategy)
{
const int wait_flr_ms = 200;
int i, vf_id, flr_vf_id = -1;
@@ -242,6 +269,7 @@ static void verify_flr(int pf_fd, int num_vfs, struct subcheck *checks, int num_
igt_sriov_enable_vfs(pf_fd, num_vfs);
if (igt_warn_on(!igt_sriov_device_reset_exists(pf_fd, 1)))
goto disable_vfs;
+
/* Refresh PCI state */
if (igt_warn_on(igt_pci_system_reinit()))
goto disable_vfs;
@@ -257,14 +285,34 @@ static void verify_flr(int pf_fd, int num_vfs, struct subcheck *checks, int num_
if (no_subchecks_can_proceed(checks, num_checks))
goto cleanup;
- flr_vf_id = 1;
+ /* Execute the chosen FLR strategy */
+ flr_vf_id = exec_strategy(pf_fd, num_vfs, checks, num_checks, wait_flr_ms);
+
+cleanup:
+ for (i = 0; i < num_checks; ++i)
+ checks[i].cleanup(checks[i].data);
+
+disable_vfs:
+ igt_sriov_disable_vfs(pf_fd);
+
+ if (flr_vf_id > 0 || no_subchecks_can_proceed(checks, num_checks))
+ subchecks_report_results(checks, num_checks);
+ else
+ igt_skip("No checks executed\n");
+}
+
+static int execute_sequential_flr(int pf_fd, int num_vfs,
+ struct subcheck *checks, int num_checks,
+ const int wait_flr_ms)
+{
+ int i, vf_id, flr_vf_id = 1;
do {
if (igt_warn_on_f(!igt_sriov_device_reset(pf_fd, flr_vf_id),
"Initiating VF%u FLR failed\n", flr_vf_id))
- goto cleanup;
+ break;
- /* assume FLR is finished after wait_flr_ms */
+ /* Assume FLR is finished after wait_flr_ms */
usleep(wait_flr_ms * 1000);
for (vf_id = 1; vf_id <= num_vfs; ++vf_id)
@@ -272,28 +320,43 @@ static void verify_flr(int pf_fd, int num_vfs, struct subcheck *checks, int num_
if (subcheck_can_proceed(&checks[i]))
checks[i].verify_vf(vf_id, flr_vf_id, checks[i].data);
- /* reinitialize test data for FLRed VF */
+ /* Reinitialize test data for the FLRed VF */
if (flr_vf_id < num_vfs)
for (i = 0; i < num_checks; ++i)
if (subcheck_can_proceed(&checks[i]))
checks[i].prepare_vf(flr_vf_id, checks[i].data);
if (no_subchecks_can_proceed(checks, num_checks))
- goto cleanup;
+ break;
} while (++flr_vf_id <= num_vfs);
-cleanup:
- for (i = 0; i < num_checks; ++i)
- checks[i].cleanup(checks[i].data);
+ return flr_vf_id - 1;
+}
-disable_vfs:
- igt_sriov_disable_vfs(pf_fd);
+static int execute_parallel_flr(int pf_fd, int num_vfs, struct subcheck *checks,
+ int num_checks, const int wait_flr_ms)
+{
+ int i, vf_id, flr_vf_id = 1;
- if (flr_vf_id > 1 || no_subchecks_can_proceed(checks, num_checks))
- subchecks_report_results(checks, num_checks);
- else
- igt_skip("No checks executed\n");
+ for (; flr_vf_id <= num_vfs; ++flr_vf_id) {
+ if (igt_warn_on_f(!igt_sriov_device_reset(pf_fd, flr_vf_id),
+ "Initiating VF%u FLR failed\n", flr_vf_id))
+ break;
+ }
+
+ /* At least one FLR initiated */
+ if (flr_vf_id > 1) {
+ /* Assume FLRs finished after wait_flr_ms */
+ usleep(wait_flr_ms * 1000);
+
+ for (vf_id = 1; vf_id <= num_vfs; ++vf_id)
+ for (i = 0; i < num_checks; ++i)
+ if (subcheck_can_proceed(&checks[i]))
+ checks[i].verify_vf(vf_id, vf_id, checks[i].data);
+ }
+
+ return flr_vf_id - 1;
}
#define GEN12_VF_CAP_REG 0x1901f8
@@ -817,7 +880,7 @@ static void regs_subcheck_cleanup(struct subcheck_data *data)
intel_register_access_fini(&rdata->mmio[i]);
}
-static void clear_tests(int pf_fd, int num_vfs)
+static void clear_tests(int pf_fd, int num_vfs, flr_exec_strategy exec_strategy)
{
struct xe_mmio xemmio = { };
const unsigned int num_gts = xe_number_gt(pf_fd);
@@ -882,7 +945,7 @@ static void clear_tests(int pf_fd, int num_vfs)
};
igt_assert_eq(i, num_checks);
- verify_flr(pf_fd, num_vfs, checks, num_checks);
+ verify_flr(pf_fd, num_vfs, checks, num_checks, exec_strategy);
}
igt_main
@@ -899,7 +962,7 @@ igt_main
igt_describe("Verify LMEM, GGTT, and SCRATCH_REGS are properly cleared after VF1 FLR");
igt_subtest("flr-vf1-clear") {
- clear_tests(pf_fd, 1);
+ clear_tests(pf_fd, 1, execute_sequential_flr);
}
igt_describe("Perform sequential FLR on each VF, verifying that LMEM, GGTT, and SCRATCH_REGS are cleared only on the reset VF.");
@@ -908,7 +971,16 @@ igt_main
igt_require(total_vfs > 1);
- clear_tests(pf_fd, total_vfs > 3 ? 3 : total_vfs);
+ clear_tests(pf_fd, total_vfs > 3 ? 3 : total_vfs, execute_sequential_flr);
+ }
+
+ igt_describe("Perform FLR on all VFs in parallel, ensuring correct behavior during simultaneous resets.");
+ igt_subtest("flr-vfs-parallel") {
+ unsigned int total_vfs = igt_sriov_get_total_vfs(pf_fd);
+
+ igt_require(total_vfs > 1);
+
+ clear_tests(pf_fd, total_vfs, execute_parallel_flr);
}
igt_fixture {
--
2.31.1
More information about the igt-dev
mailing list