[PATCH i-g-t v3] benchmarks: Add VKMS benchmark

Arthur Grillo arthurgrillo at riseup.net
Tue Feb 13 19:59:51 UTC 2024



On 13/02/24 15:06, Kamil Konieczny wrote:
> Hi Arthur,
> On 2024-02-09 at 16:39:09 -0300, Arthur Grillo wrote:
> 
> I will merge this with different description:
> 
> [PATCH i-g-t v3] benchmarks: Add KMS frambuffer stress benchmark
> 
> Is this ok?

Its ok

Best Regards,
~Arthur Grillo

> 
> Regards,
> Kamil
> 
>> Create a benchmark for the VKMS driver. Use a KMS layout with deliberate
>> odd sizes to try to avoid alignment accidents and run it for FRAME_COUNT
>> frames flipping framebuffers in each plane.
>>
>> This benchmark was suggested by Pekka Paalanen to better analyse
>> possible performance regression on the Virtual Kernel Modesetting(VKMS)
>> driver.
>>
>> With this benchmark I was able to determine two performance regression:
>>
>> - 322d716a3e8a ("drm/vkms: isolate pixel conversion functionality")
>> - cc4fd2934d41 ("drm/vkms: Isolate writeback pixel conversion functions")
>>
>> Link: https://lore.kernel.org/all/20240202214527.1d97c881@ferris.localdomain/
>> Suggested-by: Pekka Paalanen <pekka.paalanen at haloniitty.fi>
>> Acked-by: Pekka Paalanen <pekka.paalanen at collabora.com>
>> Acked-by: Maíra Canal <mcanal at igalia.com>
>> Acked-by: Kamil Konieczny <kamil.konieczny at linux.intel.com>
>> Signed-off-by: Arthur Grillo <arthurgrillo at riseup.net>
>> ---
>> Changes in v3:
>> - Change primary plane width to not extend outside the CRTC size
>> - Explicitly set a big CRTC size (Peeka Paalanen)
>> - Report time spent in the loop (Peeka Paalanen)
>> - Put file name in alphabetical order on meson script (Kamil Konieczny)
>> - Link to v2: https://lore.kernel.org/r/20240208-bench-v2-1-1eccee1055ad@riseup.net
>>
>> Changes in v2:
>> - Zero initialize data
>> - Don't wrap igt_create_* functions (Juha-Pekka Heikkila)
>> - Add a `break;` when a pipe is found (Pekka Paalanen)
>> - Rename file to kms_fb_stress.c (Kamil Konieczny)
>> - Replace 2 by NUM_FBS (Juha-Pekka Heikkila)
>> - Replace license text by SPDX License (Kamil Konieczny)
>> - Move explanations to commit description (Kamil Konieczny)
>> - Require output after find_wb_output() (Pekka Paalanen & Juha-Pekka
>>   Heikkila)
>> - Remove unnecessary commit (Pekka Paalanen)
>> - Link to v1: https://lore.kernel.org/r/20240207-bench-v1-1-7135ad426860@riseup.net
>> ---
>>  benchmarks/kms_fb_stress.c | 208 +++++++++++++++++++++++++++++++++++++++++++++
>>  benchmarks/meson.build     |   1 +
>>  2 files changed, 209 insertions(+)
>>
>> diff --git a/benchmarks/kms_fb_stress.c b/benchmarks/kms_fb_stress.c
>> new file mode 100644
>> index 000000000000..9a0e98bed8ad
>> --- /dev/null
>> +++ b/benchmarks/kms_fb_stress.c
>> @@ -0,0 +1,208 @@
>> +// SPDX-License-Identifier: MIT
>> +/*
>> + * Copyright © 2024 Arthur Grillo
>> + */
>> +
>> +#include "igt.h"
>> +
>> +#define FRAME_COUNT 100
>> +#define NUM_FBS 2
>> +
>> +struct rect_t {
>> +	int x, y;
>> +	int width, height;
>> +};
>> +
>> +struct plane_t {
>> +	igt_plane_t *base;
>> +	struct rect_t rect;
>> +	uint32_t format;
>> +	struct igt_fb fbs[NUM_FBS];
>> +};
>> +
>> +struct kms_t {
>> +	struct rect_t crtc;
>> +	struct plane_t primary;
>> +	struct plane_t overlay_a;
>> +	struct plane_t overlay_b;
>> +	struct plane_t writeback;
>> +};
>> +
>> +struct data_t {
>> +	int fd;
>> +	igt_display_t display;
>> +	igt_output_t *wb_output;
>> +	drmModeModeInfo *mode;
>> +	struct kms_t kms;
>> +};
>> +
>> +static void plane_setup(struct plane_t *plane, int index)
>> +{
>> +	igt_plane_set_size(plane->base, plane->rect.width, plane->rect.height);
>> +	igt_plane_set_position(plane->base, plane->rect.x, plane->rect.y);
>> +	igt_plane_set_fb(plane->base, &plane->fbs[index]);
>> +}
>> +
>> +static void gen_fbs(struct data_t *data)
>> +{
>> +	struct kms_t *kms = &data->kms;
>> +	drmModeModeInfo *mode = igt_output_get_mode(data->wb_output);
>> +
>> +	for (int i = 0; i < NUM_FBS; i++) {
>> +		igt_create_color_fb(data->fd, kms->primary.rect.width, kms->primary.rect.height,
>> +				    kms->primary.format, DRM_FORMAT_MOD_LINEAR,
>> +				    !i, i, i,
>> +				    &kms->primary.fbs[i]);
>> +
>> +		igt_create_color_fb(data->fd, kms->overlay_a.rect.width, kms->overlay_a.rect.height,
>> +				    kms->overlay_a.format, DRM_FORMAT_MOD_LINEAR,
>> +				    i, !i, i,
>> +				    &kms->overlay_a.fbs[i]);
>> +
>> +		igt_create_color_fb(data->fd, kms->overlay_b.rect.width, kms->overlay_b.rect.height,
>> +				    kms->overlay_b.format, DRM_FORMAT_MOD_LINEAR,
>> +				    i, i, !i,
>> +				    &kms->overlay_b.fbs[i]);
>> +
>> +		kms->writeback.rect.width = mode->hdisplay;
>> +		kms->writeback.rect.height = mode->vdisplay;
>> +		igt_create_fb(data->fd, kms->writeback.rect.width, kms->writeback.rect.height,
>> +			      kms->writeback.format, DRM_FORMAT_MOD_LINEAR,
>> +			      &kms->writeback.fbs[i]);
>> +	}
>> +}
>> +
>> +static igt_output_t *find_wb_output(struct data_t *data)
>> +{
>> +	for (int i = 0; i < data->display.n_outputs; i++) {
>> +		igt_output_t *output = &data->display.outputs[i];
>> +
>> +		if (output->config.connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK)
>> +			continue;
>> +
>> +		return output;
>> +
>> +	}
>> +
>> +	return NULL;
>> +}
>> +
>> +static void set_crtc_size(struct data_t *data)
>> +{
>> +	drmModeModeInfo *mode;
>> +	struct rect_t *crtc = &data->kms.crtc;
>> +
>> +	for_each_connector_mode(data->wb_output) {
>> +		mode = &data->wb_output->config.connector->modes[j__];
>> +		if (mode->hdisplay == crtc->width && mode->vdisplay == crtc->height) {
>> +			igt_output_override_mode(data->wb_output, mode);
>> +			return;
>> +		}
>> +	}
>> +
>> +
>> +	igt_assert_f(0, "CRTC size %dx%d not supported\n", crtc->width, crtc->height);
>> +}
>> +
>> +static struct kms_t default_kms = {
>> +	.crtc = {
>> +		.width = 4096, .height = 2160,
>> +	},
>> +	.primary = {
>> +		.rect = {
>> +			.x = 101, .y = 0,
>> +			.width = 3639, .height = 2160,
>> +		},
>> +		.format = DRM_FORMAT_XRGB8888,
>> +	},
>> +	.overlay_a = {
>> +		.rect = {
>> +			.x = 201, .y = 199,
>> +			.width = 3033, .height = 1777,
>> +		},
>> +		.format = DRM_FORMAT_XRGB16161616,
>> +	},
>> +	.overlay_b = {
>> +		.rect = {
>> +			.x = 1800, .y = 250,
>> +			.width = 1507, .height = 1400,
>> +		},
>> +		.format = DRM_FORMAT_ARGB8888,
>> +	},
>> +	.writeback = {
>> +		.rect = {
>> +			.x = 0, .y = 0,
>> +			// Size is to be determined at runtime
>> +		},
>> +		.format = DRM_FORMAT_XRGB8888,
>> +	},
>> +};
>> +
>> +
>> +igt_simple_main
>> +{
>> +	struct data_t data = {0};
>> +	enum pipe pipe = PIPE_NONE;
>> +	struct timespec then, now;
>> +	double elapsed;
>> +
>> +	data.kms = default_kms;
>> +
>> +	data.fd = drm_open_driver_master(DRIVER_ANY);
>> +
>> +	igt_display_require(&data.display, data.fd);
>> +
>> +	kmstest_set_vt_graphics_mode();
>> +
>> +	igt_display_require(&data.display, data.fd);
>> +	igt_require(data.display.is_atomic);
>> +
>> +	igt_display_require_output(&data.display);
>> +
>> +	igt_display_reset(&data.display);
>> +
>> +	data.wb_output = find_wb_output(&data);
>> +	igt_require(data.wb_output);
>> +
>> +	for_each_pipe(&data.display, pipe) {
>> +		igt_debug("Selecting pipe %s to %s\n",
>> +			  kmstest_pipe_name(pipe),
>> +			  igt_output_name(data.wb_output));
>> +		igt_output_set_pipe(data.wb_output, pipe);
>> +		break;
>> +	}
>> +
>> +	set_crtc_size(&data);
>> +
>> +	gen_fbs(&data);
>> +
>> +	data.kms.primary.base = igt_output_get_plane_type(data.wb_output, DRM_PLANE_TYPE_PRIMARY);
>> +	data.kms.overlay_a.base = igt_output_get_plane_type_index(data.wb_output,
>> +								  DRM_PLANE_TYPE_OVERLAY, 0);
>> +	data.kms.overlay_b.base = igt_output_get_plane_type_index(data.wb_output,
>> +								  DRM_PLANE_TYPE_OVERLAY, 1);
>> +
>> +	igt_assert_eq(igt_gettime(&then), 0);
>> +
>> +	for (int i = 0; i < FRAME_COUNT; i++) {
>> +		int fb_index = i % NUM_FBS;
>> +
>> +		plane_setup(&data.kms.primary, fb_index);
>> +
>> +		plane_setup(&data.kms.overlay_a, fb_index);
>> +
>> +		plane_setup(&data.kms.overlay_b, fb_index);
>> +
>> +		igt_output_set_writeback_fb(data.wb_output, &data.kms.writeback.fbs[fb_index]);
>> +
>> +		igt_display_commit2(&data.display, COMMIT_ATOMIC);
>> +	}
>> +
>> +	igt_assert_eq(igt_gettime(&now), 0);
>> +	elapsed = igt_time_elapsed(&then, &now);
>> +
>> +	igt_info("Time spent in the loop with %d frames: %lfs.\n", FRAME_COUNT, elapsed);
>> +
>> +	igt_display_fini(&data.display);
>> +	drm_close_driver(data.fd);
>> +}
>> diff --git a/benchmarks/meson.build b/benchmarks/meson.build
>> index c451268bc44f..2c9a88fd3b00 100644
>> --- a/benchmarks/meson.build
>> +++ b/benchmarks/meson.build
>> @@ -17,6 +17,7 @@ benchmark_progs = [
>>  	'intel_upload_blit_large_gtt',
>>  	'intel_upload_blit_large_map',
>>  	'intel_upload_blit_small',
>> +	'kms_fb_stress',
>>  	'kms_vblank',
>>  	'prime_lookup',
>>  	'vgem_mmap',
>>
>> ---
>> base-commit: c58c5fb6aa1cb7d3627a15e364816a7a2add9edc
>> change-id: 20240207-bench-393789eaba47
>>
>> Best regards,
>> -- 
>> Arthur Grillo <arthurgrillo at riseup.net>
>>


More information about the igt-dev mailing list