[i-g-t v6 7/9] tests/kms_vrr: Allow for multiple rates in a test
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Mon Feb 26 07:20:33 UTC 2024
From: Sean Paul <seanpaul at chromium.org>
Instead of passing just one rate into flip_and_measure, pass in an array
to allow for tests which vary the refresh rate from one frame to the
next. Currently the test will just cycle through the rates in order per
frame.
Just framework, no changes to any tests.
v2:
- Added to the set
v3: (Bhanu)
- Rebase
v4: (Bhanu)
- Fix refresh rate selection
Signed-off-by: Sean Paul <seanpaul at chromium.org>
Reviewed-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/kms_vrr.c | 93 ++++++++++++++++++++++++++++---------------------
1 file changed, 53 insertions(+), 40 deletions(-)
diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
index 30a279c56..6d516d8fc 100644
--- a/tests/kms_vrr.c
+++ b/tests/kms_vrr.c
@@ -384,34 +384,43 @@ do_flip(data_t *data, igt_fb_t *fb)
*/
static uint32_t
flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
- uint64_t rate_ns, uint64_t duration_ns)
+ uint64_t *rates_ns, int num_rates, uint64_t duration_ns)
{
uint64_t start_ns, last_event_ns, target_ns, exp_rate_ns;
uint32_t total_flip = 0, total_pass = 0;
bool front = false;
vtest_ns_t vtest_ns = data->vtest_ns;
- uint64_t threshold_hi, threshold_lo;
+ uint64_t *threshold_hi, *threshold_lo;
- if ((rate_ns <= vtest_ns.min) && (rate_ns >= vtest_ns.max))
- exp_rate_ns = rate_ns;
- else
- exp_rate_ns = vtest_ns.max;
+ threshold_hi = malloc(sizeof(uint64_t) * num_rates);
+ threshold_lo = malloc(sizeof(uint64_t) * num_rates);
+ igt_assert(threshold_hi && threshold_lo);
- /* Allow ~1 Hz deviation for different reasons causing delay. */
- threshold_hi = NSECS_PER_SEC / (((float)NSECS_PER_SEC / exp_rate_ns) + 1);
- threshold_lo = NSECS_PER_SEC / (((float)NSECS_PER_SEC / exp_rate_ns) - 1);
+ for (int i = 0; i < num_rates; ++i) {
+ if ((rates_ns[i] <= vtest_ns.min) && (rates_ns[i] >= vtest_ns.max))
+ exp_rate_ns = rates_ns[i];
+ else
+ exp_rate_ns = vtest_ns.max;
- igt_info("Requested rate: %"PRIu64" ns, Expected rate between: %"PRIu64" ns to %"PRIu64" ns\n",
- rate_ns, threshold_hi, threshold_lo);
+ /* Allow ~1 Hz deviation for different reasons causing delay. */
+ threshold_hi[i] = NSECS_PER_SEC / (((float)NSECS_PER_SEC / exp_rate_ns) + 1);
+ threshold_lo[i] = NSECS_PER_SEC / (((float)NSECS_PER_SEC / exp_rate_ns) - 1);
+
+ igt_info("Requested rate[%d]: %"PRIu64" ns, Expected rate between: %"PRIu64" ns to %"PRIu64" ns\n",
+ i, rates_ns[i], threshold_hi[i], threshold_lo[i]);
+ }
/* Align with the flip completion event to speed up convergence. */
do_flip(data, &data->fb[0]);
start_ns = last_event_ns = target_ns = get_kernel_event_ns(data,
DRM_EVENT_FLIP_COMPLETE);
- for (;;) {
+ for (int i = 0;;++i) {
uint64_t event_ns, wait_ns;
int64_t diff_ns;
+ uint64_t rate_ns = rates_ns[(i + 1) % num_rates];
+ uint64_t th_lo_ns = threshold_lo[i % num_rates];
+ uint64_t th_hi_ns = threshold_hi[i % num_rates];
front = !front;
do_flip(data, front ? &data->fb[1] : &data->fb[0]);
@@ -432,7 +441,7 @@ flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
*/
diff_ns = event_ns - last_event_ns;
- if (llabs(diff_ns) < threshold_lo && llabs(diff_ns) > threshold_hi)
+ if (llabs(diff_ns) < th_lo_ns && llabs(diff_ns) > th_hi_ns)
total_pass += 1;
last_event_ns = event_ns;
@@ -454,8 +463,12 @@ flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
while (get_time_ns() < target_ns - 10);
}
- igt_info("Completed %u flips, %u were in threshold for (%llu Hz) %"PRIu64"ns.\n",
- total_flip, total_pass, (NSECS_PER_SEC/rate_ns), rate_ns);
+ igt_info("Completed %u flips, %u were in threshold for [", total_flip, total_pass);
+ for (int i = 0; i < num_rates; ++i) {
+ igt_info("(%llu Hz) %"PRIu64"ns%s", (NSECS_PER_SEC/rates_ns[i]), rates_ns[i],
+ i < num_rates - 1 ? "," : "");
+ }
+ igt_info("]\n");
return total_flip ? ((total_pass * 100) / total_flip) : 0;
}
@@ -467,12 +480,12 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
uint32_t result;
vtest_ns_t vtest_ns;
range_t range;
- uint64_t rate;
+ uint64_t rate[] = {0};
prepare_test(data, output, pipe);
range = data->range;
vtest_ns = data->vtest_ns;
- rate = vtest_ns.rate_ns;
+ rate[0] = vtest_ns.rate_ns;
igt_info("VRR Test execution on %s, PIPE_%s with VRR range: (%u-%u) Hz\n",
output->name, kmstest_pipe_name(pipe), range.min, range.max);
@@ -486,7 +499,7 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
* This is to make sure we were actually in the middle of
* active flipping before doing the DPMS/suspend steps.
*/
- flip_and_measure(data, output, pipe, rate, 250000000ull);
+ flip_and_measure(data, output, pipe, rate, 1, 250000000ull);
if (flags & TEST_DPMS) {
kmstest_set_connector_dpms(output->display->drm_fd,
@@ -517,27 +530,27 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
* next Vmin.
*/
if (flags & TEST_FLIPLINE) {
- rate = rate_from_refresh(range.max + 5);
- result = flip_and_measure(data, output, pipe, rate, data->duration_ns);
+ rate[0] = rate_from_refresh(range.max + 5);
+ result = flip_and_measure(data, output, pipe, rate, 1, data->duration_ns);
igt_assert_f(result > 75,
"Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on threshold not reached, result was %u%%\n",
- (range.max + 5), rate, result);
+ (range.max + 5), rate[0], result);
}
if (flags & ~TEST_NEGATIVE) {
- rate = vtest_ns.rate_ns;
- result = flip_and_measure(data, output, pipe, rate, data->duration_ns);
+ rate[0] = vtest_ns.rate_ns;
+ result = flip_and_measure(data, output, pipe, rate, 1, data->duration_ns);
igt_assert_f(result > 75,
"Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on threshold not reached, result was %u%%\n",
- ((range.max + range.min) / 2), rate, result);
+ ((range.max + range.min) / 2), rate[0], result);
}
if (flags & TEST_FLIPLINE) {
- rate = rate_from_refresh(range.min - 10);
- result = flip_and_measure(data, output, pipe, rate, data->duration_ns);
+ rate[0] = rate_from_refresh(range.min - 10);
+ result = flip_and_measure(data, output, pipe, rate, 1, data->duration_ns);
igt_assert_f(result < 50,
"Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on threshold exceeded, result was %u%%\n",
- (range.min - 10), rate, result);
+ (range.min - 10), rate[0], result);
}
/*
@@ -546,11 +559,11 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
* a VRR capable panel.
*/
set_vrr_on_pipe(data, pipe, !(flags & TEST_FASTSET), (flags & TEST_NEGATIVE) ? true : false);
- rate = vtest_ns.rate_ns;
- result = flip_and_measure(data, output, pipe, rate, data->duration_ns);
+ rate[0] = vtest_ns.rate_ns;
+ result = flip_and_measure(data, output, pipe, rate, 1, data->duration_ns);
igt_assert_f(result < 10,
"Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold exceeded, result was %u%%\n",
- ((range.max + range.min) / 2), rate, (flags & TEST_NEGATIVE)? "on" : "off", result);
+ ((range.max + range.min) / 2), rate[0], (flags & TEST_NEGATIVE)? "on" : "off", result);
}
static void
@@ -558,7 +571,7 @@ test_seamless_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint3
{
uint32_t result;
vtest_ns_t vtest_ns;
- uint64_t rate;
+ uint64_t rate[] = {0};
bool vrr = !!(flags & TEST_SEAMLESS_VRR);
igt_info("Use HIGH_RR Mode as default (VRR: %s): ", vrr ? "ON" : "OFF");
@@ -578,11 +591,11 @@ test_seamless_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint3
igt_assert(igt_display_try_commit_atomic(&data->display, DRM_MODE_PAGE_FLIP_EVENT, NULL) == 0);
}
- rate = vtest_ns.max;
- result = flip_and_measure(data, output, pipe, rate, data->duration_ns);
+ rate[0] = vtest_ns.max;
+ result = flip_and_measure(data, output, pipe, rate, 1, data->duration_ns);
igt_assert_f(result > 75,
"Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold not reached, result was %u%%\n",
- data->range.max, rate, vrr ? "on" : "off", result);
+ data->range.max, rate[0], vrr ? "on" : "off", result);
/* Switch to low rr mode without modeset. */
igt_info("Switch to LOW_RR Mode (VRR: %s): ", vrr ? "ON" : "OFF");
@@ -590,11 +603,11 @@ test_seamless_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint3
igt_output_override_mode(output, &data->switch_modes[LOW_RR_MODE]);
igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
- rate = vtest_ns.min;
- result = flip_and_measure(data, output, pipe, rate, data->duration_ns);
+ rate[0] = vtest_ns.min;
+ result = flip_and_measure(data, output, pipe, rate, 1, data->duration_ns);
igt_assert_f(result > 75,
"Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold not reached, result was %u%%\n",
- data->range.min, rate, vrr ? "on" : "off", result);
+ data->range.min, rate[0], vrr ? "on" : "off", result);
/* Switch back to high rr mode without modeset. */
igt_info("Switch back to HIGH_RR Mode (VRR: %s): ", vrr ? "ON" : "OFF");
@@ -602,11 +615,11 @@ test_seamless_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint3
igt_output_override_mode(output, &data->switch_modes[HIGH_RR_MODE]);
igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
- rate = vtest_ns.rate_ns;
- result = flip_and_measure(data, output, pipe, rate, data->duration_ns);
+ rate[0] = vtest_ns.rate_ns;
+ result = flip_and_measure(data, output, pipe, rate, 1, data->duration_ns);
igt_assert_f(vrr ? (result > 75) : (result < 10),
"Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold %s, result was %u%%\n",
- ((data->range.max + data->range.min) / 2), rate,
+ ((data->range.max + data->range.min) / 2), rate[0],
vrr ? "on" : "off", vrr ? "not reached" : "exceeded", result);
}
--
2.43.0
More information about the igt-dev
mailing list