[PATCH] tests/kms_universal_plane: Re-work expectations for non-intel hw
Kamil Konieczny
kamil.konieczny at linux.intel.com
Thu Jan 11 13:36:59 UTC 2024
Hi Rob,
On 2024-01-10 at 12:04:34 -0800, Rob Clark wrote:
> From: Rob Clark <robdclark at chromium.org>
>
> The expectation assumptions do not fit for non-intel hw. So re-work the
> expectations and add msm support.
>
> Signed-off-by: Rob Clark <robdclark at chromium.org>
> ---
> tests/kms_universal_plane.c | 102 +++++++++++++++++++++++++-----------
> 1 file changed, 72 insertions(+), 30 deletions(-)
>
> diff --git a/tests/kms_universal_plane.c b/tests/kms_universal_plane.c
> index 6a39f93cc5aa..3158ff816046 100644
> --- a/tests/kms_universal_plane.c
> +++ b/tests/kms_universal_plane.c
> @@ -402,8 +402,7 @@ sanity_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
> sanity_test_t test = { .data = data };
> igt_plane_t *primary;
> drmModeModeInfo *mode;
> - int i;
> - int expect = 0;
Could you keep this var?
> + int i, ret;
>
> igt_output_set_pipe(output, pipe);
> mode = igt_output_get_mode(output);
> @@ -418,43 +417,86 @@ sanity_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
>
> /*
> * Try to use universal plane API to set primary plane that
> - * doesn't cover CRTC (should fail on pre-gen9 and succeed on
> - * gen9+).
> + * doesn't cover CRTC.
> */
> igt_plane_set_fb(primary, &test.undersized_fb);
> - if (is_intel_device(data->drm_fd))
> - expect = (data->display_ver < 9) ? -EINVAL : 0;
> - igt_assert(igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL) == expect);
> + ret = igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL);
> +
> + if (is_intel_device(data->drm_fd)) {
> + /* should fail on pre-gen9 and succeed on gen9+: */
> + if (data->display_ver < 9)
> + igt_assert_eq(ret, -EINVAL);
> + else
> + igt_assert_eq(ret, 0);
> + } else if (is_msm_device(data->drm_fd)) {
> + /* Should be supported on all gens: */
> + igt_assert_eq(ret, 0);
> + } else {
> + igt_assert_eq(ret, 0);
> + }
The old code above should work on msm, why do you changed it?
>
> - /* Same as above, but different plane positioning. */
> + /* Same as above, but different plane positioning: */
Drop this change.
> igt_plane_set_position(primary, 100, 100);
> - igt_assert(igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL) == expect);
> + ret = igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL);
> +
> + if (is_intel_device(data->drm_fd)) {
> + /* should fail on pre-gen9 and succeed on gen9+: */
> + if (data->display_ver < 9)
> + igt_assert_eq(ret, -EINVAL);
> + else
> + igt_assert_eq(ret, 0);
> + } else if (is_msm_device(data->drm_fd)) {
> + /* Should be supported on all gens: */
> + igt_assert_eq(ret, 0);
> + } else {
> + igt_assert_eq(ret, 0);
> + }
Same here, old code should just work for msm.
>
> igt_plane_set_position(primary, 0, 0);
>
> - /* Try to use universal plane API to scale down (should fail on pre-gen9) */
> - if (is_intel_device(data->drm_fd))
> - expect = (data->display_ver < 9) ? -ERANGE : 0;
Please keep this if(...) expect = ...
for a reason which follows.
> - igt_assert(drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
> - output->config.crtc->crtc_id,
> - test.oversized_fb.fb_id, 0,
> - 0, 0,
> - mode->hdisplay + 100,
> - mode->vdisplay + 100,
> - IGT_FIXED(0,0), IGT_FIXED(0,0),
> - IGT_FIXED(mode->hdisplay,0),
> - IGT_FIXED(mode->vdisplay,0)) == expect);
> + /* Try to use universal plane API to scale down */
> + ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
> + output->config.crtc->crtc_id,
> + test.oversized_fb.fb_id, 0,
> + 0, 0,
> + mode->hdisplay + 100,
> + mode->vdisplay + 100,
> + IGT_FIXED(0,0), IGT_FIXED(0,0),
> + IGT_FIXED(mode->hdisplay,0),
> + IGT_FIXED(mode->vdisplay,0));
> +
> + if (is_intel_device(data->drm_fd)) {
> + /* should fail on pre-gen9 and succeed on gen9+: */
> + if (data->display_ver < 9)
> + igt_assert_eq(ret, -ERANGE);
> + else
> + igt_assert_eq(ret, 0);
Or just simple
igt_assert_eq(ret, expect);
> + } else {
> + /* Could succeed or fail with -ERANGE depending on hw limits: */
> + igt_assert((ret == 0) || (ret == -ERANGE));
> + }
This is a real change, it relaxed checks for non-intel HW.
imho we should ask others, for example amd developers if that is ok
for them.
>
> /* Try to use universal plane API to scale up (should fail on pre-gen9) */
> - igt_assert(drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
> - output->config.crtc->crtc_id,
> - test.oversized_fb.fb_id, 0,
> - 0, 0,
> - mode->hdisplay,
> - mode->vdisplay,
> - IGT_FIXED(0,0), IGT_FIXED(0,0),
> - IGT_FIXED(mode->hdisplay - 100,0),
> - IGT_FIXED(mode->vdisplay - 100,0)) == expect);
> + ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
> + output->config.crtc->crtc_id,
> + test.oversized_fb.fb_id, 0,
> + 0, 0,
> + mode->hdisplay,
> + mode->vdisplay,
> + IGT_FIXED(0,0), IGT_FIXED(0,0),
> + IGT_FIXED(mode->hdisplay - 100,0),
> + IGT_FIXED(mode->vdisplay - 100,0));
> +
> + if (is_intel_device(data->drm_fd)) {
> + /* should fail on pre-gen9 and succeed on gen9+: */
> + if (data->display_ver < 9)
> + igt_assert_eq(ret, -ERANGE);
> + else
> + igt_assert_eq(ret, 0);
Same here, just simple:
igt_assert_eq(ret, expect);
Regards,
Kamil
> + } else {
> + /* Could succeed or fail with -ERANGE depending on hw limits: */
> + igt_assert((ret == 0) || (ret == -ERANGE));
> + }
>
> /* Find other crtcs and try to program our primary plane on them */
> for (i = 0; i < test.moderes->count_crtcs; i++)
> --
> 2.43.0
>
More information about the igt-dev
mailing list