[PATCH i-g-t 2/2] tests/intel/xe_pm: Extend mocs-rpm test to support D3Cold

[Riana Tauro]

Hi Badal

On 7/1/2024 8:24 PM, Badal Nilawar wrote:
> Use existing d3 helpers to cover D3Hot and D3Cold.
add description for the test being modified in commit message
> 
> Signed-off-by: Badal Nilawar <badal.nilawar at intel.com>
> ---
>   tests/intel/xe_pm.c | 49 +++++++++++++++++++++++++++++++--------------
>   1 file changed, 34 insertions(+), 15 deletions(-)
> 
> diff --git a/tests/intel/xe_pm.c b/tests/intel/xe_pm.c
> index b30e94a2a..eac5ea8a7 100644
> --- a/tests/intel/xe_pm.c
> +++ b/tests/intel/xe_pm.c
> @@ -611,10 +611,15 @@ static void test_mmap(device_t device, uint32_t placement, uint32_t flags,
>   }
>   
>   /**
> - * SUBTEST: mocs-rpm
> + * SUBTEST: %s-mocs-rpm
%s already denotes the runtime pm state. 'rpm' can be dropped
>    * Description:
>    *     Validate mocs register contents over suspend resume
%s/register/registers
%s/suspend resume/runtime suspend,resume
>    *
> + * arg[2]:
%s/arg[2]/arg[1]
> + *
> + * @d3hot:	d3hot
> + * @d3cold:	d3cold
> + *
>    * Functionality: mocs registers
Functionality for the other mocs test is pm - %arg[1]
Should be same
>    * Run type: FULL
>    */
> @@ -629,9 +634,14 @@ static void test_mmap(device_t device, uint32_t placement, uint32_t flags,
>    * @s3:		s3
>    * @s4:		s4
>    */
> -static void test_mocs_suspend_resume(device_t device, int s_state)
> +static void test_mocs_suspend_resume(device_t device, enum igt_suspend_state s_state,
> +				     enum igt_acpi_d_state d_state)
>   {
>   	int gt;
> +	uint64_t active_time;
> +	bool check_rpm = (d_state == IGT_ACPI_D3Hot ||
> +			  d_state == IGT_ACPI_D3Cold);
> +
>   
>   	xe_for_each_gt(device.fd_xe, gt) {
It would be good to have a log to identify the gt running this test,
else would be difficult to identify which GT moc registers failed
>   		char path[256];
> @@ -644,19 +654,27 @@ static void test_mocs_suspend_resume(device_t device, int s_state)
>   		igt_debugfs_dump(device.fd_xe, path);
>   		igt_debugfs_read(device.fd_xe, path, mocs_content_pre);
>   
> -		if (s_state == NO_SUSPEND) {
> +		if (check_rpm) {
> +			igt_assert(in_d3(device, d_state));
> +			active_time = igt_pm_get_runtime_active_time(device.pci_xe);
> +
>   			fw_handle = igt_debugfs_open(device.fd_xe, "forcewake_all", O_RDONLY);
>   			igt_assert(fw_handle >= 0);
> -			igt_assert(igt_get_runtime_pm_status() == IGT_RUNTIME_PM_STATUS_ACTIVE);
> +			igt_assert(igt_pm_get_runtime_active_time(device.pci_xe) >
> +				   active_time);
>   
>   			/* Make sure runtime pm goes back to suspended status after closing forcewake_all */
>   			close(fw_handle);
> -			igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_SUSPENDED));
> +			sleep(1);
> +
> +			igt_assert(in_d3(device, d_state));
>   		} else {
> -			enum igt_suspend_test test = s_state == SUSPEND_STATE_DISK ?
> -				SUSPEND_TEST_DEVICES : SUSPEND_TEST_NONE;
> +			if (s_state != NO_SUSPEND) {
> +				enum igt_suspend_test test = s_state == SUSPEND_STATE_DISK ?
> +					SUSPEND_TEST_DEVICES : SUSPEND_TEST_NONE;
>   
> -			igt_system_suspend_autoresume(s_state, test);
> +				igt_system_suspend_autoresume(s_state, test);
> +			}
>   		}
>   		igt_assert(igt_debugfs_exists(device.fd_xe, path, O_RDONLY));
>   		igt_debugfs_dump(device.fd_xe, path);
> @@ -766,7 +784,7 @@ igt_main
>   		}
>   
>   		igt_subtest_f("%s-mocs", s->name)
add igt_describe
> -			test_mocs_suspend_resume(device, s->state);
> +			test_mocs_suspend_resume(device, s->state, NO_RPM);
>   	}
>   
>   	igt_fixture {
> @@ -825,6 +843,13 @@ igt_main
>   
>   			igt_pm_set_autosuspend_delay(device.pci_xe, delay_ms);
>   		}
add igt_describe

Could you also add the tests temporarily to BAT in these series to check 
the CI of the new tests?

Thanks
Riana Tauro
> +
> +		igt_subtest_f("%s-mocs-rpm", d->name) {
> +			igt_assert(setup_d3(device, d->state));
> +			test_mocs_suspend_resume(device, NO_SUSPEND, d->state);
> +			cleanup_d3(device);
> +		}
> +
>   	}
>   
>   	igt_describe("Validate whether card is limited to d3hot,"
> @@ -835,12 +860,6 @@ igt_main
>   		test_vram_d3cold_threshold(device, sysfs_fd);
>   	}
>   
> -	igt_subtest("mocs-rpm") {
> -		dpms_on_off(device, DRM_MODE_DPMS_OFF);
> -		test_mocs_suspend_resume(device, NO_SUSPEND);
> -		dpms_on_off(device, DRM_MODE_DPMS_ON);
> -	}
> -
>   	igt_fixture {
>   		close(sysfs_fd);
>   		igt_pm_set_d3cold_allowed(device.pci_slot_name, d3cold_allowed);