[i-g-t V6 6/8] tests/kms_flip: Force joiner support in bigjoiner checks

[Modem, Bhanuprakash]

Hi Jeevan,

Thanks for the review, please find my comments inline.

On 27-06-2024 12:34 pm, B, Jeevan wrote:
> 
> 
>> -----Original Message-----
>> From: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>
>> Sent: Tuesday, June 18, 2024 1:53 PM
>> To: igt-dev at lists.freedesktop.org; B, Jeevan <jeevan.b at intel.com>
>> Cc: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>; Joshi, Kunal1
>> <kunal1.joshi at intel.com>
>> Subject: [i-g-t V6 6/8] tests/kms_flip: Force joiner support in bigjoiner checks
>>
>> As we recently introduced the option (through debugfs) to force the bigjoiner,
>> needs to extend the support in bigjoiner checks to handle the force joiner.
>>
>> V2: - Fix connector name
>>
>> Cc: Kunal Joshi <kunal1.joshi at intel.com>
>> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
>> ---
>>   tests/kms_flip.c | 23 +++++++++++++++++++----
>>   1 file changed, 19 insertions(+), 4 deletions(-)
>>
>> diff --git a/tests/kms_flip.c b/tests/kms_flip.c index d352ee14c..cbabbe74f
>> 100755
>> --- a/tests/kms_flip.c
>> +++ b/tests/kms_flip.c
>> @@ -1730,22 +1730,37 @@ static void run_test_on_crtc_set(struct
>> test_output *o, int *crtc_idxs,
>>   	/*
>>   	 * Handle BW limitations on intel hardware:
>>   	 *
>> -	 * if mode resolution > 5K (or) mode clock > max_dotclock, then ignore
>> +	 * if force joiner (or) mode resolution > 5K (or) mode clock >
>> +max_dotclock, then ignore
>>   	 *  - last crtc in single/multi-connector config
>>   	 *  - consecutive crtcs in multi-connector config
>>   	 *
>>   	 * in multi-connector config ignore if
>> -	 *  - previous crtc (mode resolution > 5K or mode clock > max_dotclock)
>> and
>> +	 *  - previous crtc (force joiner or mode resolution > 5K or mode
>> +clock > max_dotclock) and
>>   	 *  - current & previous crtcs are consecutive
>>   	 */
>>   	if (!is_intel_device(drm_fd))
>>   		goto test;
>>
>>   	for (i = 0; i < crtc_count; i++) {
>> -		if ((igt_bigjoiner_possible(&o->kmode[i], max_dotclock) &&
>> +		char conn_name[24], prev_conn_name[24];
>> +
>> +		snprintf(conn_name, sizeof(conn_name),
>> +			 "%s-%d",
>> +			 kmstest_connector_type_str(o->kconnector[i]-
>>> connector_type),
>> +			 o->kconnector[i]->connector_type_id);
>> +
>> +		if (i > 0)
>> +			snprintf(prev_conn_name, sizeof(prev_conn_name),
>> +				 "%s-%d",
>> +				 kmstest_connector_type_str(o->kconnector[i -
>> 1]->connector_type),
>> +				 o->kconnector[i - 1]->connector_type_id);
> Is printing this necessary ??

Here we are not printing anything, but extracting the connector name 
from o->kconnector.

- Bhanu

>> +
>> +		if (((igt_check_force_joiner_status(drm_fd, conn_name) ||
>> +		      igt_bigjoiner_possible(&o->kmode[i], max_dotclock)) &&
>>   		     ((crtc_idxs[i] >= (total_crtcs - 1)) ||
>>   		      ((i < (crtc_count - 1)) && (abs(crtc_idxs[i + 1] - crtc_idxs[i])
>> <= 1)))) ||
>> -		    ((i > 0) && igt_bigjoiner_possible(&o->kmode[i - 1],
>> max_dotclock) &&
>> +		    ((i > 0) && (igt_check_force_joiner_status(drm_fd,
>> prev_conn_name) ||
>> +				 igt_bigjoiner_possible(&o->kmode[i - 1],
>> max_dotclock)) &&
>>   		     (abs(crtc_idxs[i] - crtc_idxs[i - 1]) <= 1))) {
>>
>>   			igt_debug("Combo: %s is not possible with selected
>> mode(s).\n", test_name);
>> --
>> 2.43.2
>