[PATCH i-g-t 2/2] tests/intel/kms_big_joiner: revamp kms_big_joiner
Lisovskiy, Stanislav
stanislav.lisovskiy at intel.com
Wed Mar 6 10:42:49 UTC 2024
On Wed, Mar 06, 2024 at 12:33:47PM +0200, Lisovskiy, Stanislav wrote:
> On Wed, Mar 06, 2024 at 03:41:26PM +0530, Joshi, Kunal1 wrote:
> > Hello Stan,
> >
> > On 3/6/2024 3:23 PM, Lisovskiy, Stanislav wrote:
> > > On Wed, Mar 06, 2024 at 10:55:09AM +0530, Kunal Joshi wrote:
> > > > big joiner outputs are statically assigned to pipe,
> > > > rewrite to assign dynamically
> > > >
> > > > v2: Don't change license (Bhanu)
> > > > Add documentation for generate_combinations (Bhanu)
> > > > Print the pipe name (Bhanu)
> > > > Remove unwanted commit (Bhanu)
> > > > Move combine output logic to igt_fixture (Bhanu)
> > > > split revamp and force joiner (Bhanu)
> > > >
> > > > Cc: Karthik B S<karthik.b.s at intel.com>
> > > > Cc: Bhanuprakash Modem<bhanuprakash.modem at intel.com>
> > > > Signed-off-by: Kunal Joshi<kunal1.joshi at intel.com>
> > > > ---
> > > > tests/intel/kms_big_joiner.c | 391 +++++++++++++++++------------------
> > > > 1 file changed, 187 insertions(+), 204 deletions(-)
> > > >
> > > > diff --git a/tests/intel/kms_big_joiner.c b/tests/intel/kms_big_joiner.c
> > > > index 28678b958..ba4097d8b 100644
> > > > --- a/tests/intel/kms_big_joiner.c
> > > > +++ b/tests/intel/kms_big_joiner.c
> > > > @@ -43,16 +43,19 @@
> > > > *
> > > > * SUBTEST: basic
> > > > * Description: Verify the basic modeset on big joiner mode on all pipes
> > > > - *
> > > > - * SUBTEST: 2x-modeset
> > > > - * Description: Verify simultaneous modeset on 2 big joiner outputs
> > > > */
> > > > -
> > > > IGT_TEST_DESCRIPTION("Test big joiner");
> > > > -struct bigjoiner_output {
> > > > - uint32_t output_id;
> > > > - drmModeModeInfo mode;
> > > > +#define MAX_OUTPUTS 256
> > > > +#define MAX_COMBINATIONS 1000
> > > > +#define INVALID_TEST_OUTPUT 2
> > > > +typedef struct {
> > > > + int combination[MAX_OUTPUTS];
> > > > +} Combination;
> > > > +
> > > > +enum joiner_type {
> > > > + BIG_JOINER = 1 << 1,
> > > > + INVALID_JOINER = -1,
> > > > };
> > > > typedef struct {
> > > > @@ -60,273 +63,253 @@ typedef struct {
> > > > igt_display_t display;
> > > > struct igt_fb fb;
> > > > int n_pipes;
> > > > - enum pipe pipe1;
> > > > - enum pipe pipe2;
> > > > - struct bigjoiner_output output[2];
> > > > + uint64_t big_joiner_outputs[IGT_MAX_PIPES];
> > > > + uint64_t non_big_joiner_outputs[IGT_MAX_PIPES];
> > > > + uint64_t combined_outputs[IGT_MAX_PIPES];
> > > > + int big_joiner_output_count;
> > > > + int non_big_joiner_output_count;
> > > > + int combined_output_count;
> > > > + int output_count;
> > > > + enum pipe pipe_seq[IGT_MAX_PIPES];
> > > > } data_t;
> > > > static int max_dotclock;
> > > > -static void test_invalid_modeset(data_t *data)
> > > > +/*
> > > > + * The generate_combinations function generates combinations of pipe allocations
> > > > + * for a given number of outputs
> > > > + *
> > > > + * @output_count: Number of outputs to allocate pipes for.
> > > > + * @pipe_count: Total number of available pipes.
> > > > + * @pipes_per_output: Number of pipes to be allocated for a single output.
> > > > + * @combinations: Array to store generated combinations.
> > > > + * @num_combinations: Pointer to a variable that stores the number of generated combinations.
> > > > + *
> > > > + * Example (output_count=2, pipe_count=4, pipes_per_output=2):
> > > > + * Combination 1: 0 2
> > > > + * Combination 2: 1 3
> > > I think this might be a bit overcomplicated - just for your information, we can't deliberately
> > > choose which pipes can be used for bigjoiner. On some platforms even only certain pipes, can be
> > > used for bigjoiner.
> > > Moreover the way how driver decides, which pipes are going to be used for bigjoiner is basically
> > > this code in intel_dp.c:
> > >
> > > if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay,
> > > adjusted_mode->crtc_clock))
> > > pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe);
> > >
> > > Means if you try to do a modeset with resolution > 5K or exceed max_dot_clock on crtc->pipe,
> > > then _always_ pipe + 1, going to be used for bigjoiner.
> > >
> > >
> > > Stan
> > >
> > Thanks for the inputs,
> > Goal here is to try various combination possible,
> > Suppose a platform supports 5 pipes(A-E) and we have 1 bigjoiner output
> > (DP-1) then we want to try
> > DP-1 on PIPE_A
> > DP-1 on PIPE_B
> > DP-1 on PIPE_C
> > DP-1 on PIPE_D
> >
> > Suppose a platform supports 5 pipes(A-E) and we have 2 bigjoiner output
> > (DP-1, DP-2) then we want to try
> > DP-1 on PIPE_A and DP-2 on PIPE_C
> > DP-1 on PIPE_B and DP-2 on PIPE_D And so on, Going forward this will be
> > useful we introduce any feature which can allow having more pipes per output
> > also.
>
> That won't work. BSpec and current driver code allows to use only _adjacent_ pipes.
> I.e if you modeset PIPE_A with 5K resolution, then bigjoiner_pipes mask would be
> PIPE_A | PIPE_B. If you modeset PIPE_B with 5K resolution it will take PIPE_C as a
> slave and so on.
> So for instance of you had DP-1 assigned to PIPE_A and DP-2 assigned to PIPE_C by test,
> _driver_ will still reassign PIPE_B to DP-2, in order for bigjoiner to work.
Meant "will still reassign PIPE_B to DP-1" to make > 5K resolution possible on DP-1.
So basically anyway we can't have all possible combinations, but only those which are
allowed by spec.
In this case it can be either
DP-1 bigjoiner on PIPE A|PIPE B
DP-2 bigjoiner on PIPE C|PIPE D
or vice versa
DP-1 bigjoiner on PIPE C|PIPE D
DP-2 bigjoiner on PIPE A|PIPE B
Stan
> That logic is implemented in intel_dp.c, as I mentioned above.
> Also you can check the BSpec Bigjoiner programming description.
>
> Stan
>
>
> >
> > >
> > > > +*/
> > > > +static void generate_combinations(int output_count, int pipe_count,
> > > > + int pipes_per_output,
> > > > + Combination combinations[MAX_COMBINATIONS],
> > > > + uint64_t *num_combinations)
> > > > {
> > > > - igt_output_t *output;
> > > > - igt_display_t *display = &data->display;
> > > > - int ret;
> > > > + int i, index;
> > > > + int current_combination[MAX_OUTPUTS];
> > > > - igt_info("Bigjoiner test on ");
> > > > - for_each_connected_output(display, output){
> > > > - enum pipe p = output->pending_pipe;
> > > > - drmModeModeInfo *mode;
> > > > - igt_pipe_t *pipe;
> > > > - igt_plane_t *plane;
> > > > + for (i = 0; i < output_count; ++i)
> > > > + current_combination[i] = i * pipes_per_output;
> > > > - if (p == PIPE_NONE)
> > > > - continue;
> > > > -
> > > > - mode = igt_output_get_mode(output);
> > > > - igt_info("pipe:%s, output:%s, mode:", kmstest_pipe_name(p), igt_output_name(output));
> > > > - kmstest_dump_mode(mode);
> > > > + while (*num_combinations < MAX_COMBINATIONS && current_combination[0] <= pipe_count - output_count * pipes_per_output) {
> > > > + for (i = 0; i < output_count; ++i)
> > > > + combinations[*num_combinations].combination[i] = current_combination[i];
> > > > - pipe = &display->pipes[p];
> > > > - plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> > > > + (*num_combinations)++;
> > > > - igt_plane_set_fb(plane, &data->fb);
> > > > - igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
> > > > - igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
> > > > - }
> > > > + index = output_count - 1;
> > > > + while (index >= 0 && current_combination[index] == pipe_count - (output_count - index) * pipes_per_output)
> > > > + index--;
> > > > - igt_assert(!igt_check_bigjoiner_support(display));
> > > > + if (index < 0)
> > > > + break;
> > > > - /* This commit is expectd to fail as this pipe is being used for big joiner */
> > > > - ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
> > > > - DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> > > > + current_combination[index]++;
> > > > + for (i = index + 1; i < output_count; ++i)
> > > > + current_combination[i] = current_combination[i - 1] + pipes_per_output;
> > > > + }
> > > > +}
> > > > - igt_display_reset(&data->display);
> > > > - igt_display_commit2(display, COMMIT_ATOMIC);
> > > > +static igt_output_t *get_output_by_id_or_assert(data_t *data, uint64_t output_id)
> > > > +{
> > > > + igt_output_t *output;
> > > > - igt_assert_lt(ret, 0);
> > > > + for_each_connected_output(&data->display, output) {
> > > > + if (output->id == output_id)
> > > > + return output;
> > > > + }
> > > > + igt_assert("Output not found\n");
> > > > + return NULL;
> > > > }
> > > > -static void test_basic_modeset(data_t *data)
> > > > +static void test_invalid_modeset_two_joiner(data_t *data, bool combined)
> > > > {
> > > > + int i, j, ret;
> > > > + igt_output_t *output;
> > > > + uint64_t *outputs;
> > > > + igt_plane_t *primary[INVALID_TEST_OUTPUT];
> > > > + igt_fb_t fb[INVALID_TEST_OUTPUT];
> > > > drmModeModeInfo *mode;
> > > > - igt_output_t *output, *bigjoiner_output = NULL;
> > > > - igt_display_t *display = &data->display;
> > > > - igt_pipe_t *pipe;
> > > > - igt_plane_t *plane;
> > > > - igt_display_reset(display);
> > > > -
> > > > - for_each_connected_output(display, output) {
> > > > - if (data->output[0].output_id == output->id) {
> > > > - bigjoiner_output = output;
> > > > - break;
> > > > + outputs = combined ? data->combined_outputs : data->big_joiner_outputs;
> > > > +
> > > > + for (i = 0; i < data->n_pipes-1; i++) {
> > > > + igt_display_reset(&data->display);
> > > > + for (j = 0; j < INVALID_TEST_OUTPUT; j++) {
> > > > + output = get_output_by_id_or_assert(data, outputs[j]);
> > > > + igt_assert(output);
> > > > + igt_output_set_pipe(output, data->pipe_seq[i + j]);
> > > > + mode = igt_output_get_mode(output);
> > > > + igt_info("Assigning pipe %s to %s with mode %dx%d@%d%s",
> > > > + kmstest_pipe_name(data->pipe_seq[i + j]),
> > > > + igt_output_name(output), mode->hdisplay,
> > > > + mode->vdisplay, mode->vrefresh,
> > > > + j == INVALID_TEST_OUTPUT - 1 ? "\n" : ", ");
> > > > + primary[j] = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> > > > + igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay, DRM_FORMAT_XRGB8888,
> > > > + DRM_FORMAT_MOD_LINEAR, &fb[j]);
> > > > + igt_plane_set_fb(primary[j], &fb[j]);
> > > > }
> > > > + ret = igt_display_try_commit2(&data->display, COMMIT_ATOMIC);
> > > > + igt_assert_f(ret != 0, "Commit shouldn't have passed\n");
> > > > }
> > > > -
> > > > - igt_output_set_pipe(bigjoiner_output, data->pipe1);
> > > > -
> > > > - mode = &data->output[0].mode;
> > > > - igt_output_override_mode(bigjoiner_output, mode);
> > > > -
> > > > - pipe = &display->pipes[data->pipe1];
> > > > - plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> > > > -
> > > > - igt_plane_set_fb(plane, &data->fb);
> > > > - igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
> > > > - igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
> > > > -
> > > > - igt_display_commit2(display, COMMIT_ATOMIC);
> > > > -
> > > > - igt_output_set_pipe(bigjoiner_output, PIPE_NONE);
> > > > - igt_plane_set_fb(plane, NULL);
> > > > - igt_display_commit2(display, COMMIT_ATOMIC);
> > > > }
> > > > -static void test_dual_display(data_t *data)
> > > > +static void tets_big_joiner_on_last_pipe(data_t *data)
> > > > {
> > > > + int i, ret;
> > > > + uint64_t *outputs;
> > > > + igt_output_t *output;
> > > > + igt_plane_t *primary;
> > > > + igt_fb_t fb;
> > > > drmModeModeInfo *mode;
> > > > - igt_output_t *output, *bigjoiner_output[2];
> > > > - igt_display_t *display = &data->display;
> > > > - igt_pipe_t *pipe;
> > > > - igt_plane_t *plane1, *plane2;
> > > > - int count = 0;
> > > > -
> > > > - igt_display_reset(display);
> > > > -
> > > > - for_each_connected_output(display, output) {
> > > > - if (data->output[count].output_id == output->id) {
> > > > - bigjoiner_output[count] = output;
> > > > - count++;
> > > > - }
> > > > - if (count > 1)
> > > > - break;
> > > > + outputs = data->big_joiner_outputs;
> > > > + for (i = 0; i < data->big_joiner_output_count; i++) {
> > > > + igt_display_reset(&data->display);
> > > > + output = get_output_by_id_or_assert(data, outputs[i]);
> > > > + igt_output_set_pipe(output, data->pipe_seq[data->n_pipes - 1]);
> > > > + mode = igt_output_get_mode(output);
> > > > + igt_info("Assigning pipe %s to %s with mode %dx%d@%d\n",
> > > > + kmstest_pipe_name(data->pipe_seq[data->n_pipes - 1]),
> > > > + igt_output_name(output), mode->hdisplay,
> > > > + mode->vdisplay, mode->vrefresh);
> > > > + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> > > > + igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay, DRM_FORMAT_XRGB8888,
> > > > + DRM_FORMAT_MOD_LINEAR, &fb);
> > > > + igt_plane_set_fb(primary, &fb);
> > > > + ret = igt_display_try_commit2(&data->display, COMMIT_ATOMIC);
> > > > + igt_assert_f(ret != 0, "Commit shouldn't have passed\n");
> > > > }
> > > > +}
> > > > - igt_output_set_pipe(bigjoiner_output[0], data->pipe1);
> > > > - igt_output_set_pipe(bigjoiner_output[1], data->pipe2);
> > > > -
> > > > - /* Set up first big joiner output on Pipe A*/
> > > > - mode = &data->output[0].mode;
> > > > - igt_output_override_mode(bigjoiner_output[0], mode);
> > > > -
> > > > - pipe = &display->pipes[data->pipe1];
> > > > - plane1 = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> > > > -
> > > > - igt_plane_set_fb(plane1, &data->fb);
> > > > - igt_fb_set_size(&data->fb, plane1, mode->hdisplay, mode->vdisplay);
> > > > - igt_plane_set_size(plane1, mode->hdisplay, mode->vdisplay);
> > > > -
> > > > - /* Set up second big joiner output on Pipe C*/
> > > > - mode = &data->output[1].mode;
> > > > - igt_output_override_mode(bigjoiner_output[1], mode);
> > > > -
> > > > - pipe = &display->pipes[data->pipe2];
> > > > - plane2 = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> > > > -
> > > > - igt_plane_set_fb(plane2, &data->fb);
> > > > - igt_fb_set_size(&data->fb, plane2, mode->hdisplay, mode->vdisplay);
> > > > - igt_plane_set_size(plane2, mode->hdisplay, mode->vdisplay);
> > > > -
> > > > - igt_display_commit2(display, COMMIT_ATOMIC);
> > > > +static void test_basic_modeset(data_t *data, int num_outputs,
> > > > + Combination combinations[MAX_COMBINATIONS],
> > > > + uint64_t num_combinations)
> > > > +{
> > > > + int i, j, ret;
> > > > + igt_display_t *display = &data->display;
> > > > + igt_output_t *output[num_outputs];
> > > > + igt_plane_t *primary[num_outputs];
> > > > + igt_fb_t fb[num_outputs];
> > > > + drmModeModeInfo *mode;
> > > > - /* Clean up */
> > > > - igt_output_set_pipe(bigjoiner_output[0], PIPE_NONE);
> > > > - igt_output_set_pipe(bigjoiner_output[1], PIPE_NONE);
> > > > - igt_plane_set_fb(plane1, NULL);
> > > > - igt_plane_set_fb(plane2, NULL);
> > > > - igt_display_commit2(display, COMMIT_ATOMIC);
> > > > + for (i = 0; i < num_combinations; i++) {
> > > > + igt_display_reset(display);
> > > > + for (j = 0; j < num_outputs; j++) {
> > > > + output[j] = get_output_by_id_or_assert(data,
> > > > + data->big_joiner_outputs[j]);
> > > > + igt_info("Assigning pipe %s to %s%s",
> > > > + kmstest_pipe_name(data->pipe_seq[combinations[i].combination[j]]),
> > > > + output[j]->name, j == num_outputs - 1 ? "\n" : ", ");
> > > > + igt_output_set_pipe(output[j], data->pipe_seq[combinations[i].combination[j]]);
> > > > + primary[j] = igt_output_get_plane_type(output[j], DRM_PLANE_TYPE_PRIMARY);
> > > > + mode = igt_output_get_mode(output[j]);
> > > > + igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay, DRM_FORMAT_XRGB8888,
> > > > + DRM_FORMAT_MOD_LINEAR, &fb[j]);
> > > > + igt_plane_set_fb(primary[j], &fb[j]);
> > > > + }
> > > > + ret = igt_display_try_commit2(display, COMMIT_ATOMIC);
> > > > + igt_assert_f(ret == 0, "Commit failed\n");
> > > > + }
> > > > }
> > > > igt_main
> > > > {
> > > > + int i, j;
> > > > data_t data;
> > > > igt_output_t *output;
> > > > - drmModeModeInfo mode;
> > > > - int valid_output = 0, i, count = 0, j = 0;
> > > > - uint16_t width = 0, height = 0;
> > > > - enum pipe pipe_seq[IGT_MAX_PIPES];
> > > > + drmModeModeInfo default_mode;
> > > > + i = j = 0;
> > > > igt_fixture {
> > > > data.drm_fd = drm_open_driver_master(DRIVER_INTEL | DRIVER_XE);
> > > > kmstest_set_vt_graphics_mode();
> > > > -
> > > > igt_display_require(&data.display, data.drm_fd);
> > > > igt_require(data.display.is_atomic);
> > > > -
> > > > max_dotclock = igt_get_max_dotclock(data.drm_fd);
> > > > + data.big_joiner_output_count = 0;
> > > > + data.non_big_joiner_output_count = 0;
> > > > + data.combined_output_count = 0;
> > > > + data.output_count = 0;
> > > > for_each_connected_output(&data.display, output) {
> > > > bool found = false;
> > > > drmModeConnector *connector = output->config.connector;
> > > > -
> > > > - /*
> > > > - * Bigjoiner will come in to the picture when the
> > > > - * resolution > 5K or clock > max-dot-clock.
> > > > - */
> > > > found = bigjoiner_mode_found(data.drm_fd, connector, max_dotclock);
> > > > -
> > > > if (found) {
> > > > - data.output[count].output_id = output->id;
> > > > - memcpy(&data.output[count].mode, &mode, sizeof(drmModeModeInfo));
> > > > - count++;
> > > > -
> > > > - width = max(width, mode.hdisplay);
> > > > - height = max(height, mode.vdisplay);
> > > > + data.big_joiner_outputs[data.big_joiner_output_count++] = output->id;
> > > > + igt_output_override_mode(output, &connector->modes[0]);
> > > > + } else {
> > > > + data.non_big_joiner_outputs[data.non_big_joiner_output_count++] = output->id;
> > > > + kmstest_get_connector_default_mode(data.drm_fd, connector, &default_mode);
> > > > + igt_output_override_mode(output, &default_mode);
> > > > }
> > > > - valid_output++;
> > > > + data.output_count++;
> > > > + }
> > > > +
> > > > + if (data.big_joiner_output_count == 1 && data.non_big_joiner_output_count > 0) {
> > > > + data.combined_outputs[data.combined_output_count++] = data.big_joiner_outputs[0];
> > > > + data.combined_outputs[data.combined_output_count++] = data.non_big_joiner_outputs[0];
> > > > }
> > > > data.n_pipes = 0;
> > > > for_each_pipe(&data.display, i) {
> > > > data.n_pipes++;
> > > > - pipe_seq[j] = i;
> > > > + data.pipe_seq[j] = i;
> > > > j++;
> > > > }
> > > > -
> > > > - igt_require_f(count > 0, "No output with 5k+ mode (or) clock > max-dot-clock found\n");
> > > > -
> > > > - igt_create_pattern_fb(data.drm_fd, width, height, DRM_FORMAT_XRGB8888,
> > > > - DRM_FORMAT_MOD_LINEAR, &data.fb);
> > > > }
> > > > igt_describe("Verify the basic modeset on big joiner mode on all pipes");
> > > > igt_subtest_with_dynamic("basic") {
> > > > - for (i = 0; i < data.n_pipes - 1; i++) {
> > > > - data.pipe1 = pipe_seq[i];
> > > > - igt_dynamic_f("pipe-%s", kmstest_pipe_name(pipe_seq[i]))
> > > > - test_basic_modeset(&data);
> > > > + igt_require_f(data.big_joiner_output_count > 0, "Big joiner output not found\n");
> > > > + igt_require_f(data.n_pipes > 1, "Minimum of 2 pipes are required\n");
> > > > +
> > > > + for (i = 0; i < data.big_joiner_output_count; i++) {
> > > > + uint64_t num_combinations = 0;
> > > > + Combination combinations[MAX_COMBINATIONS];
> > > > +
> > > > + generate_combinations(i+1, data.n_pipes, BIG_JOINER, combinations, &num_combinations);
> > > > + igt_info("Number of combinations for %d outputs and %d pipes are %ld\n",
> > > > + i+1, data.n_pipes, num_combinations);
> > > > +
> > > > + if (num_combinations > 0)
> > > > + igt_dynamic_f("%dx-big-joiner", i+1)
> > > > + test_basic_modeset(&data, i+1, combinations, num_combinations);
> > > > + else
> > > > + break;
> > > > }
> > > > }
> > > > - igt_describe("Verify if the modeset on the adjoining pipe is rejected "
> > > > - "when the pipe is active with a big joiner modeset");
> > > > igt_subtest_with_dynamic("invalid-modeset") {
> > > > - data.pipe1 = pipe_seq[j - 1];
> > > > -
> > > > - igt_display_reset(&data.display);
> > > > - for_each_connected_output(&data.display, output) {
> > > > - if (data.output[0].output_id != output->id)
> > > > - continue;
> > > > -
> > > > - mode = data.output[0].mode;
> > > > - igt_output_set_pipe(output, data.pipe1);
> > > > - igt_output_override_mode(output, &mode);
> > > > + igt_require_f(data.big_joiner_output_count > 0, "Big joiner output not found\n");
> > > > + igt_require_f(data.n_pipes > 1, "Minimum of 2 pipes are required\n");
> > > > - igt_dynamic_f("pipe-%s-%s",
> > > > - kmstest_pipe_name(data.pipe1),
> > > > - igt_output_name(output))
> > > > - test_invalid_modeset(&data);
> > > > - }
> > > > + if (data.big_joiner_output_count >= 1)
> > > > + igt_dynamic_f("big_joiner_on_last_pipe")
> > > > + tets_big_joiner_on_last_pipe(&data);
> > > > - if(valid_output > 1) {
> > > > - for (i = 0; i < data.n_pipes - 1; i++) {
> > > > - igt_output_t *first_output = NULL, *second_output = NULL;
> > > > -
> > > > - data.pipe1 = pipe_seq[i];
> > > > - data.pipe2 = pipe_seq[i + 1];
> > > > -
> > > > - igt_display_reset(&data.display);
> > > > - for_each_connected_output(&data.display, output) {
> > > > - if (data.output[0].output_id == output->id) {
> > > > - first_output = output;
> > > > - mode = data.output[0].mode;
> > > > -
> > > > - igt_output_set_pipe(output, data.pipe1);
> > > > - igt_output_override_mode(output, &mode);
> > > > - } else if (second_output == NULL) {
> > > > - second_output = output;
> > > > - igt_output_set_pipe(output, data.pipe2);
> > > > -
> > > > - break;
> > > > - }
> > > > - }
> > > > -
> > > > - igt_dynamic_f("pipe-%s-%s-pipe-%s-%s",
> > > > - kmstest_pipe_name(data.pipe1),
> > > > - igt_output_name(first_output),
> > > > - kmstest_pipe_name(data.pipe2),
> > > > - igt_output_name(second_output))
> > > > - test_invalid_modeset(&data);
> > > > - }
> > > > - }
> > > > - }
> > > > + if (data.big_joiner_output_count > 1)
> > > > + igt_dynamic_f("invalid_combinations_with_two_bigjoiner")
> > > > + test_invalid_modeset_two_joiner(&data, false);
> > > > - igt_describe("Verify simultaneous modeset on 2 big joiner outputs");
> > > > - igt_subtest_with_dynamic("2x-modeset") {
> > > > - igt_require_f(count > 1, "2 outputs with big joiner modes are required\n");
> > > > - igt_require_f(data.n_pipes > 3, "Minumum of 4 pipes are required\n");
> > > > - for (i = 0; (i + 2) < data.n_pipes - 1; i++) {
> > > > - data.pipe1 = pipe_seq[i];
> > > > - data.pipe2 = pipe_seq[i + 2];
> > > > - igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe_seq[i]), kmstest_pipe_name(pipe_seq[i + 2]))
> > > > - test_dual_display(&data);
> > > > + if (data.combined_output_count) {
> > > > + igt_dynamic_f("invalid_combinations_with_bigjoiner_non_bigjoiner")
> > > > + test_invalid_modeset_two_joiner(&data, true);
> > > > }
> > > > }
> > > > igt_fixture {
> > > > - igt_remove_fb(data.drm_fd, &data.fb);
> > > > igt_display_fini(&data.display);
> > > > drm_close_driver(data.drm_fd);
> > > > }
> > > > --
> > > > 2.25.1
> > Thanks and Regards
> > Kunal Joshi
More information about the igt-dev
mailing list