[PATCH i-g-t 2/4] tests/intel/kms_big_joiner: revamp bigjoiner
Nautiyal, Ankit K
ankit.k.nautiyal at intel.com
Thu Mar 14 08:43:39 UTC 2024
On 3/10/2024 7:57 PM, Kunal Joshi wrote:
> modify test to support simultaneously testing multiple bigjoiner
> output and ignoring fused off pipes.
I think there are a lot of changes in the patch, changing the basic
test, removing the 2x test, adding multiple bigjoiner tests in one go.
Imho, this should be broken into smaller patches.
>
> v2: Don't change license (Bhanu)
> Print the pipe name (Bhanu)
> Remove unwanted commit (Bhanu)
> Move combine output logic to igt_fixture (Bhanu)
> split revamp and force joiner (Bhanu)
>
> v3: Ignored fused pipes (Stan)
>
> Cc: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> Cc: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> Cc: Karthik B S <karthik.b.s at intel.com>
> Cc: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> Signed-off-by: Kunal Joshi <kunal1.joshi at intel.com>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> ---
> tests/intel/kms_big_joiner.c | 398 +++++++++++++++++------------------
> 1 file changed, 195 insertions(+), 203 deletions(-)
>
> diff --git a/tests/intel/kms_big_joiner.c b/tests/intel/kms_big_joiner.c
> index 28678b958..d4b0d1100 100644
> --- a/tests/intel/kms_big_joiner.c
> +++ b/tests/intel/kms_big_joiner.c
> @@ -37,184 +37,227 @@
> #include "igt.h"
>
> /**
> - * SUBTEST: invalid-modeset
> + * SUBTEST: invalid-modeset-bigjoiner
I think this can be retained, this doesn't seem necessary.
> * Description: Verify if the modeset on the adjoining pipe is rejected when
> * the pipe is active with a big joiner modeset
> *
> - * SUBTEST: basic
> + * SUBTEST: basic-bigjoiner
Same as above, also it already has subtests with single joiner, multi
joiner.
> * Description: Verify the basic modeset on big joiner mode on all pipes
> *
> - * SUBTEST: 2x-modeset
> - * Description: Verify simultaneous modeset on 2 big joiner outputs
> */
>
> IGT_TEST_DESCRIPTION("Test big joiner");
>
> -struct bigjoiner_output {
> - uint32_t output_id;
> - drmModeModeInfo mode;
> -};
> +#define INVALID_TEST_OUTPUT 2
>
> typedef struct {
> int drm_fd;
> - igt_display_t display;
> - struct igt_fb fb;
> + int big_joiner_output_count;
> + int non_big_joiner_output_count;
> + int combined_output_count;
> + int output_count;
> int n_pipes;
> - enum pipe pipe1;
> - enum pipe pipe2;
> - struct bigjoiner_output output[2];
> + int master_pipes;
> + uint64_t big_joiner_output[IGT_MAX_PIPES];
> + uint64_t non_big_joiner_output[IGT_MAX_PIPES];
> + uint64_t combined_output[IGT_MAX_PIPES];
> + enum pipe pipe_seq[IGT_MAX_PIPES];
> + igt_display_t display;
> } data_t;
>
> static int max_dotclock;
>
> -static void test_invalid_modeset(data_t *data)
> +static void set_all_master_pipes_for_platform(data_t *data)
> {
> - igt_output_t *output;
> - igt_display_t *display = &data->display;
> - int ret;
> -
> - igt_info("Bigjoiner test on ");
> - for_each_connected_output(display, output){
> - enum pipe p = output->pending_pipe;
> - drmModeModeInfo *mode;
> - igt_pipe_t *pipe;
> - igt_plane_t *plane;
> + enum pipe pipe;
>
> - if (p == PIPE_NONE)
> - continue;
> -
> - mode = igt_output_get_mode(output);
> - igt_info("pipe:%s, output:%s, mode:", kmstest_pipe_name(p), igt_output_name(output));
> - kmstest_dump_mode(mode);
> + for (pipe = PIPE_A; pipe < IGT_MAX_PIPES; pipe++)
> + if (data->display.pipes[pipe].enabled) {
> + igt_info("Found master pipe %s\n", kmstest_pipe_name(pipe));
> + data->master_pipes |= BIT(pipe);
> + }
> +}
>
> - pipe = &display->pipes[p];
> - plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> +static igt_output_t *get_output_by_id_or_assert(data_t *data, uint64_t id)
> +{
> + igt_output_t *output;
>
> - igt_plane_set_fb(plane, &data->fb);
> - igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
> - igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
> + for_each_connected_output(&data->display, output) {
> + if (output->id == id)
> + return output;
> }
> + igt_assert_f(false, "Output not found\n");
> + return NULL;
> +}
>
> - igt_assert(!igt_check_bigjoiner_support(display));
> -
> - /* This commit is expectd to fail as this pipe is being used for big joiner */
> - ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
> - DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> -
> - igt_display_reset(&data->display);
> - igt_display_commit2(display, COMMIT_ATOMIC);
> +static enum pipe get_next_master_pipe(data_t *data, unsigned int available_pipe_mask)
> +{
> + if ((data->master_pipes & available_pipe_mask) == 0)
> + return PIPE_NONE;
>
> - igt_assert_lt(ret, 0);
> + return ffs(data->master_pipes & available_pipe_mask) - 1;
> }
>
> -static void test_basic_modeset(data_t *data)
> +static void test_single_joiner(data_t *data, int output_count)
> {
> + int i, ret;
> + enum pipe pipe, master_pipe;
> + unsigned int available_pipe_mask = BIT(data->n_pipes) - 1;
> + unsigned int attempt_mask;
> + igt_output_t *output;
> + igt_plane_t *primary;
> + uint64_t *outputs;
> + igt_fb_t fb;
> drmModeModeInfo *mode;
> - igt_output_t *output, *bigjoiner_output = NULL;
> - igt_display_t *display = &data->display;
> - igt_pipe_t *pipe;
> - igt_plane_t *plane;
>
> - igt_display_reset(display);
> + outputs = data->big_joiner_output;
>
> - for_each_connected_output(display, output) {
> - if (data->output[0].output_id == output->id) {
> - bigjoiner_output = output;
> - break;
> + for (i = 0; i < output_count; i++) {
> + output = get_output_by_id_or_assert(data, outputs[i]);
> + for (pipe = 0; pipe < data->n_pipes-1; pipe++) {
> + igt_display_reset(&data->display);
> + attempt_mask = BIT(pipe);
> +
> + master_pipe = get_next_master_pipe(data, available_pipe_mask & attempt_mask);
> + if (master_pipe == PIPE_NONE)
> + continue;
> + igt_info("Using pipe %s as master and %s slave for %s\n", kmstest_pipe_name(pipe), kmstest_pipe_name(pipe + 1), output->name);
In case a pipe is fused off we are ignoring it for master pipe, but
since we cannot have it as slave also, we need to ignore pipe-1 also as
master.
I think similar thing is mentioned by Bhanu too in last version.
So we need to change set_all_master_pipes_for_platform accordingly.
> + igt_output_set_pipe(output, pipe);
> + mode = igt_output_get_mode(output);
> + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> + igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay, DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_MOD_LINEAR, &fb);
> + igt_plane_set_fb(primary, &fb);
> + ret = igt_display_try_commit2(&data->display, COMMIT_ATOMIC);
> + igt_assert_f(ret == 0, "Commit should have passed\n");
Do we need try commit here? We can directly use igt_display_commit_atomic.
Same in other places.
> }
> }
> +}
>
> - igt_output_set_pipe(bigjoiner_output, data->pipe1);
> +static void test_multi_joiner(data_t *data, int output_count)
> +{
> + int i, ret;
> + unsigned int available_pipe_mask;
> + enum pipe pipe, master_pipe;
> + uint64_t *outputs;
> + igt_output_t *output;
> + igt_plane_t *primary[output_count];
> + igt_fb_t fb[output_count];
> + drmModeModeInfo *mode;
>
> - mode = &data->output[0].mode;
> - igt_output_override_mode(bigjoiner_output, mode);
> + available_pipe_mask = BIT(data->n_pipes) - 1;
> + outputs = data->big_joiner_output;
>
> - pipe = &display->pipes[data->pipe1];
> - plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> + igt_display_reset(&data->display);
> + for (i = 0; i < output_count; i++) {
> + output = get_output_by_id_or_assert(data, outputs[i]);
> + for (pipe = 0; pipe < data->n_pipes; pipe++) {
> + unsigned int attempt_mask = BIT(pipe);
>
> - igt_plane_set_fb(plane, &data->fb);
> - igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
> - igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
> + master_pipe = get_next_master_pipe(data, available_pipe_mask & attempt_mask);
> + if (master_pipe == PIPE_NONE)
> + continue;
>
> - igt_display_commit2(display, COMMIT_ATOMIC);
> + igt_info("Using pipe %s as master %s slave for %s\n", kmstest_pipe_name(pipe), kmstest_pipe_name(pipe + 1), output->name);
> + igt_output_set_pipe(output, pipe);
> + mode = igt_output_get_mode(output);
> + primary[i] = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> + igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay, DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_MOD_LINEAR, &fb[i]);
> + igt_plane_set_fb(primary[i], &fb[i]);
>
> - igt_output_set_pipe(bigjoiner_output, PIPE_NONE);
> - igt_plane_set_fb(plane, NULL);
> - igt_display_commit2(display, COMMIT_ATOMIC);
> + available_pipe_mask &= ~BIT(master_pipe);
> + available_pipe_mask &= ~BIT(master_pipe + 1);
> + break;
> + }
> + }
> + ret = igt_display_try_commit2(&data->display, COMMIT_ATOMIC);
> + igt_assert_f(ret == 0, "Commit should have passed\n");
> }
>
> -static void test_dual_display(data_t *data)
> +static void test_invalid_modeset_two_joiner(data_t *data,
> + bool combined)
> {
> + int i, j, ret;
> + uint64_t *outputs;
> + igt_output_t *output;
> + igt_plane_t *primary[INVALID_TEST_OUTPUT];
> + igt_fb_t fb[INVALID_TEST_OUTPUT];
> drmModeModeInfo *mode;
> - igt_output_t *output, *bigjoiner_output[2];
> - igt_display_t *display = &data->display;
> - igt_pipe_t *pipe;
> - igt_plane_t *plane1, *plane2;
> - int count = 0;
> -
> - igt_display_reset(display);
> -
> - for_each_connected_output(display, output) {
> - if (data->output[count].output_id == output->id) {
> - bigjoiner_output[count] = output;
> - count++;
> - }
>
> - if (count > 1)
> - break;
> + outputs = combined ? data->combined_output : data->big_joiner_output;
> +
> + for (i = 0; i < data->n_pipes-1; i++) {
> + igt_display_reset(&data->display);
> + for (j = 0; j < INVALID_TEST_OUTPUT; j++) {
> + output = get_output_by_id_or_assert(data, outputs[j]);
> + igt_assert(output);
> + igt_output_set_pipe(output, data->pipe_seq[i + j]);
> + mode = igt_output_get_mode(output);
> + igt_info(" Assigning pipe %s to %s with mode %dx%d@%d%s",
> + kmstest_pipe_name(data->pipe_seq[i + j]),
> + igt_output_name(output), mode->hdisplay,
> + mode->vdisplay, mode->vrefresh,
> + j == INVALID_TEST_OUTPUT - 1 ? "\n" : ", ");
> + primary[j] = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> + igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay, DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_MOD_LINEAR, &fb[j]);
> + igt_plane_set_fb(primary[j], &fb[j]);
> + }
> + ret = igt_display_try_commit2(&data->display, COMMIT_ATOMIC);
> + igt_assert_f(ret != 0, "Commit shouldn't have passed\n");
> }
> +}
>
> - igt_output_set_pipe(bigjoiner_output[0], data->pipe1);
> - igt_output_set_pipe(bigjoiner_output[1], data->pipe2);
> -
> - /* Set up first big joiner output on Pipe A*/
> - mode = &data->output[0].mode;
> - igt_output_override_mode(bigjoiner_output[0], mode);
> -
> - pipe = &display->pipes[data->pipe1];
> - plane1 = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> -
> - igt_plane_set_fb(plane1, &data->fb);
> - igt_fb_set_size(&data->fb, plane1, mode->hdisplay, mode->vdisplay);
> - igt_plane_set_size(plane1, mode->hdisplay, mode->vdisplay);
> -
> - /* Set up second big joiner output on Pipe C*/
> - mode = &data->output[1].mode;
> - igt_output_override_mode(bigjoiner_output[1], mode);
> -
> - pipe = &display->pipes[data->pipe2];
> - plane2 = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> -
> - igt_plane_set_fb(plane2, &data->fb);
> - igt_fb_set_size(&data->fb, plane2, mode->hdisplay, mode->vdisplay);
> - igt_plane_set_size(plane2, mode->hdisplay, mode->vdisplay);
> +static void tets_big_joiner_on_last_pipe(data_t *data)
Typo: test
> +{
> + int i, len, ret;
> + uint64_t *outputs;
> + igt_output_t *output;
> + igt_plane_t *primary;
> + igt_fb_t fb;
> + drmModeModeInfo *mode;
>
> - igt_display_commit2(display, COMMIT_ATOMIC);
> + len = data->big_joiner_output_count;
> + outputs = data->big_joiner_output;
>
> - /* Clean up */
> - igt_output_set_pipe(bigjoiner_output[0], PIPE_NONE);
> - igt_output_set_pipe(bigjoiner_output[1], PIPE_NONE);
> - igt_plane_set_fb(plane1, NULL);
> - igt_plane_set_fb(plane2, NULL);
> - igt_display_commit2(display, COMMIT_ATOMIC);
> + for (i = 0; i < len; i++) {
> + igt_display_reset(&data->display);
> + output = get_output_by_id_or_assert(data, outputs[i]);
> + igt_output_set_pipe(output, data->pipe_seq[data->n_pipes - 1]);
> + mode = igt_output_get_mode(output);
> + igt_info(" Assigning pipe %s to %s with mode %dx%d@%d\n",
> + kmstest_pipe_name(data->pipe_seq[data->n_pipes - 1]),
> + igt_output_name(output), mode->hdisplay,
> + mode->vdisplay, mode->vrefresh);
> + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> + igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay, DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_MOD_LINEAR, &fb);
> + igt_plane_set_fb(primary, &fb);
> + ret = igt_display_try_commit2(&data->display, COMMIT_ATOMIC);
> + igt_assert_f(ret != 0, "Commit shouldn't have passed\n");
> + }
> }
>
> +
> igt_main
> {
> - data_t data;
> + int i, j;
> igt_output_t *output;
> - drmModeModeInfo mode;
> - int valid_output = 0, i, count = 0, j = 0;
> - uint16_t width = 0, height = 0;
> - enum pipe pipe_seq[IGT_MAX_PIPES];
> + data_t data;
>
> igt_fixture {
> + data.big_joiner_output_count = 0;
> + data.non_big_joiner_output_count = 0;
> + data.combined_output_count = 0;
> + data.output_count = 0;
> + j = 0;
> +
> data.drm_fd = drm_open_driver_master(DRIVER_INTEL | DRIVER_XE);
> kmstest_set_vt_graphics_mode();
> -
> igt_display_require(&data.display, data.drm_fd);
> + set_all_master_pipes_for_platform(&data);
> igt_require(data.display.is_atomic);
> -
> max_dotclock = igt_get_max_dotclock(data.drm_fd);
>
> for_each_connected_output(&data.display, output) {
> @@ -228,105 +271,54 @@ igt_main
> found = bigjoiner_mode_found(data.drm_fd, connector, max_dotclock);
>
> if (found) {
> - data.output[count].output_id = output->id;
> - memcpy(&data.output[count].mode, &mode, sizeof(drmModeModeInfo));
> - count++;
> -
> - width = max(width, mode.hdisplay);
> - height = max(height, mode.vdisplay);
> + data.big_joiner_output[data.big_joiner_output_count++] = output->config.connector->connector_id;
> + igt_output_override_mode(output, &connector->modes[0]);
> + } else {
> + data.non_big_joiner_output[data.non_big_joiner_output_count++] = output->config.connector->connector_id;
> }
> - valid_output++;
> + data.output_count++;
> + }
> + if (data.big_joiner_output_count == 1 && data.non_big_joiner_output_count >= 1) {
> + data.combined_output[data.combined_output_count++] = data.big_joiner_output[0];
> + data.combined_output[data.combined_output_count++] = data.non_big_joiner_output[0];
> }
> -
> data.n_pipes = 0;
> for_each_pipe(&data.display, i) {
> data.n_pipes++;
> - pipe_seq[j] = i;
> + data.pipe_seq[j] = i;
> j++;
> }
> -
> - igt_require_f(count > 0, "No output with 5k+ mode (or) clock > max-dot-clock found\n");
> -
> - igt_create_pattern_fb(data.drm_fd, width, height, DRM_FORMAT_XRGB8888,
> - DRM_FORMAT_MOD_LINEAR, &data.fb);
> }
>
> igt_describe("Verify the basic modeset on big joiner mode on all pipes");
> - igt_subtest_with_dynamic("basic") {
> - for (i = 0; i < data.n_pipes - 1; i++) {
> - data.pipe1 = pipe_seq[i];
> - igt_dynamic_f("pipe-%s", kmstest_pipe_name(pipe_seq[i]))
> - test_basic_modeset(&data);
> - }
> - }
> + igt_subtest_with_dynamic("basic-bigjoiner") {
> + igt_require_f(data.big_joiner_output_count > 0,
> + "No bigjoiner output found\n");
> + igt_require_f(data.n_pipes > 1,
> + "Minimum 2 pipes required\n");
> + igt_dynamic_f("single-joiner")
> + test_single_joiner(&data, data.big_joiner_output_count);
> + if (data.big_joiner_output_count > 1)
> + igt_dynamic_f("multi-joiner")
> + test_multi_joiner(&data, data.big_joiner_output_count);
>
> - igt_describe("Verify if the modeset on the adjoining pipe is rejected "
> - "when the pipe is active with a big joiner modeset");
> - igt_subtest_with_dynamic("invalid-modeset") {
> - data.pipe1 = pipe_seq[j - 1];
> -
> - igt_display_reset(&data.display);
> - for_each_connected_output(&data.display, output) {
> - if (data.output[0].output_id != output->id)
> - continue;
> -
> - mode = data.output[0].mode;
> - igt_output_set_pipe(output, data.pipe1);
> - igt_output_override_mode(output, &mode);
> -
> - igt_dynamic_f("pipe-%s-%s",
> - kmstest_pipe_name(data.pipe1),
> - igt_output_name(output))
> - test_invalid_modeset(&data);
> - }
> -
> - if(valid_output > 1) {
> - for (i = 0; i < data.n_pipes - 1; i++) {
> - igt_output_t *first_output = NULL, *second_output = NULL;
> -
> - data.pipe1 = pipe_seq[i];
> - data.pipe2 = pipe_seq[i + 1];
> -
> - igt_display_reset(&data.display);
> - for_each_connected_output(&data.display, output) {
> - if (data.output[0].output_id == output->id) {
> - first_output = output;
> - mode = data.output[0].mode;
> -
> - igt_output_set_pipe(output, data.pipe1);
> - igt_output_override_mode(output, &mode);
> - } else if (second_output == NULL) {
> - second_output = output;
> - igt_output_set_pipe(output, data.pipe2);
> -
> - break;
> - }
> - }
> -
> - igt_dynamic_f("pipe-%s-%s-pipe-%s-%s",
> - kmstest_pipe_name(data.pipe1),
> - igt_output_name(first_output),
> - kmstest_pipe_name(data.pipe2),
> - igt_output_name(second_output))
> - test_invalid_modeset(&data);
> - }
> - }
> }
>
> - igt_describe("Verify simultaneous modeset on 2 big joiner outputs");
> - igt_subtest_with_dynamic("2x-modeset") {
> - igt_require_f(count > 1, "2 outputs with big joiner modes are required\n");
> - igt_require_f(data.n_pipes > 3, "Minumum of 4 pipes are required\n");
> - for (i = 0; (i + 2) < data.n_pipes - 1; i++) {
> - data.pipe1 = pipe_seq[i];
> - data.pipe2 = pipe_seq[i + 2];
> - igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe_seq[i]), kmstest_pipe_name(pipe_seq[i + 2]))
> - test_dual_display(&data);
> - }
> + igt_subtest_with_dynamic("invalid-modeset-bigjoiner") {
> + igt_require_f(data.big_joiner_output_count > 0, "Non big joiner output not found\n");
I think we just need to check if there are 2 outputs or not.
Regards,
Ankit
> + igt_require_f(data.n_pipes > 1, "Minimum of 2 pipes are required\n");
> + if (data.big_joiner_output_count >= 1)
> + igt_dynamic_f("big_joiner_on_last_pipe")
> + tets_big_joiner_on_last_pipe(&data);
> + if (data.big_joiner_output_count > 1)
> + igt_dynamic_f("invalid_combinations")
> + test_invalid_modeset_two_joiner(&data, false);
> + if (data.combined_output_count)
> + igt_dynamic_f("combined_output")
> + test_invalid_modeset_two_joiner(&data, true);
> }
>
> igt_fixture {
> - igt_remove_fb(data.drm_fd, &data.fb);
> igt_display_fini(&data.display);
> drm_close_driver(data.drm_fd);
> }
More information about the igt-dev
mailing list