[PATCH i-g-t v5 7/8] benchmarks/kms_fb_stress: Optionally enable the overlay planes

[Louis Chauvet]

Reviewed-by: Louis Chauvet <louis.chauvet at bootlin.com>

Le 22/04/24 - 19:18, Arthur Grillo a écrit :
> In the future, we would like to not use overlay planes, so make them
> optional.
> 
> Signed-off-by: Arthur Grillo <arthurgrillo at riseup.net>
> ---
>  benchmarks/kms_fb_stress.c | 40 ++++++++++++++++++++++++++--------------
>  1 file changed, 26 insertions(+), 14 deletions(-)
> 
> diff --git a/benchmarks/kms_fb_stress.c b/benchmarks/kms_fb_stress.c
> index 8775fabdd164..d2d6b3e65eae 100644
> --- a/benchmarks/kms_fb_stress.c
> +++ b/benchmarks/kms_fb_stress.c
> @@ -37,6 +37,7 @@ struct data_t {
>  	igt_output_t *wb_output;
>  	drmModeModeInfo *mode;
>  	struct kms_t kms;
> +	bool use_overlay;
>  };
>  
>  static void plane_setup(struct plane_t *plane, int index)
> @@ -75,8 +76,10 @@ static void gen_fbs(struct data_t *data)
>  
>  	for (int i = 0; i < NUM_FBS; i++) {
>  		create_fb(data->fd, &kms->primary, i, !i, i, i);
> -		create_fb(data->fd, &kms->overlay_a, i, i, !i, i);
> -		create_fb(data->fd, &kms->overlay_b, i, i, i, !i);
> +		if (data->use_overlay) {
> +			create_fb(data->fd, &kms->overlay_a, i, i, !i, i);
> +			create_fb(data->fd, &kms->overlay_b, i, i, i, !i);
> +		}
>  
>  		kms->writeback.rect.width = mode->hdisplay;
>  		kms->writeback.rect.height = mode->vdisplay;
> @@ -150,12 +153,14 @@ static void stress_driver(struct data_t *data)
>  	igt_info("\tprimary:\n");
>  	igt_info("\t\tformat: %s\n", igt_format_str(data->kms.primary.format));
>  	igt_info("\t\trectangle: " RECT_FMT "\n", RECT_ARG(&data->kms.primary.rect));
> -	igt_info("\toverlay A:\n");
> -	igt_info("\t\tformat: %s\n", igt_format_str(data->kms.overlay_a.format));
> -	igt_info("\t\trectangle: " RECT_FMT "\n", RECT_ARG(&data->kms.overlay_a.rect));
> -	igt_info("\toverlay B:\n");
> -	igt_info("\t\tformat: %s\n", igt_format_str(data->kms.overlay_b.format));
> -	igt_info("\t\trectangle: " RECT_FMT "\n", RECT_ARG(&data->kms.overlay_b.rect));
> +	if (data->use_overlay) {
> +		igt_info("\toverlay A:\n");
> +		igt_info("\t\tformat: %s\n", igt_format_str(data->kms.overlay_a.format));
> +		igt_info("\t\trectangle: " RECT_FMT "\n", RECT_ARG(&data->kms.overlay_a.rect));
> +		igt_info("\toverlay B:\n");
> +		igt_info("\t\tformat: %s\n", igt_format_str(data->kms.overlay_b.format));
> +		igt_info("\t\trectangle: " RECT_FMT "\n", RECT_ARG(&data->kms.overlay_b.rect));
> +	}
>  	igt_info("\twriteback:\n");
>  	igt_info("\t\tformat: %s\n", igt_format_str(data->kms.writeback.format));
>  	igt_info("\t\trectangle: " RECT_FMT "\n", RECT_ARG(&data->kms.writeback.rect));
> @@ -169,9 +174,11 @@ static void stress_driver(struct data_t *data)
>  
>  		plane_setup(&data->kms.primary, fb_index);
>  
> -		plane_setup(&data->kms.overlay_a, fb_index);
> +		if (data->use_overlay) {
> +			plane_setup(&data->kms.overlay_a, fb_index);
>  
> -		plane_setup(&data->kms.overlay_b, fb_index);
> +			plane_setup(&data->kms.overlay_b, fb_index);
> +		}
>  
>  		igt_output_set_writeback_fb(data->wb_output, &data->kms.writeback.fbs[fb_index]);
>  
> @@ -187,14 +194,18 @@ static void stress_driver(struct data_t *data)
>  	elapsed = igt_time_elapsed(&then, &now);
>  
>  	igt_plane_set_fb(data->kms.primary.base, NULL);
> -	igt_plane_set_fb(data->kms.overlay_a.base, NULL);
> -	igt_plane_set_fb(data->kms.overlay_b.base, NULL);
> +	if (data->use_overlay) {
> +		igt_plane_set_fb(data->kms.overlay_a.base, NULL);
> +		igt_plane_set_fb(data->kms.overlay_b.base, NULL);
> +	}
>  	igt_output_set_writeback_fb(data->wb_output, NULL);
>  
>  	for (int i = 0; i < NUM_FBS; i++) {
>  		igt_remove_fb(data->fd, &data->kms.primary.fbs[i]);
> -		igt_remove_fb(data->fd, &data->kms.overlay_a.fbs[i]);
> -		igt_remove_fb(data->fd, &data->kms.overlay_b.fbs[i]);
> +		if (data->use_overlay) {
> +			igt_remove_fb(data->fd, &data->kms.overlay_a.fbs[i]);
> +			igt_remove_fb(data->fd, &data->kms.overlay_b.fbs[i]);
> +		}
>  		igt_remove_fb(data->fd, &data->kms.writeback.fbs[i]);
>  	}
>  
> @@ -279,6 +290,7 @@ igt_main
>  	}
>  
>  	igt_subtest("default-stress") {
> +		data.use_overlay = true;
>  		stress_driver(&data);
>  
>  	}
> 
> -- 
> 2.44.0
> 

-- 
Louis Chauvet, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com