[CI 2/6] lib/igt_pm: Fix and standardize IGT PM library documentation
Rodrigo Vivi
rodrigo.vivi at intel.com
Wed May 22 14:33:26 UTC 2024
A revamp to get some kind of standard in the various exported
functions in this library.
v2: s/miliseconds/milliseconds (Francois)
Cc: Francois Dugast <francois.dugast at intel.com>
Cc: Kamil Konieczny <kamil.konieczny at linux.intel.com>
Reviewed-by: Riana Tauro <riana.tauro at intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
---
lib/igt_pm.c | 148 +++++++++++++++++++++++++--------------------------
1 file changed, 73 insertions(+), 75 deletions(-)
diff --git a/lib/igt_pm.c b/lib/igt_pm.c
index cb18a88b9..ad7e13604 100644
--- a/lib/igt_pm.c
+++ b/lib/igt_pm.c
@@ -454,7 +454,7 @@ static void __igt_pm_restore_sata_link_power_management(void)
/**
* igt_pm_enable_sata_link_power_management:
*
- * Enable the min_power policy for SATA link power management.
+ * Enables the min_power policy for SATA link power management.
* Without this we cannot reach deep runtime power states.
*/
void igt_pm_enable_sata_link_power_management(void)
@@ -469,7 +469,7 @@ void igt_pm_enable_sata_link_power_management(void)
/**
* igt_pm_restore_sata_link_power_management:
*
- * Restore the link power management policies to the values
+ * Restores the link power management policies to the values
* prior to enabling min_power.
*
* Caveat: If the system supports hotplugging and hotplugging takes
@@ -566,8 +566,7 @@ static void __igt_pm_runtime_exit_handler(int sig)
* Sets up the runtime PM helper functions and enables runtime PM. To speed up
* tests the autosuspend delay is set to 0.
*
- * Returns:
- * True if runtime pm is available, false otherwise.
+ * Return: True if runtime pm is available, false otherwise.
*/
bool igt_setup_runtime_pm(int device)
{
@@ -658,7 +657,7 @@ bool igt_setup_runtime_pm(int device)
/**
* igt_disable_runtime_pm:
*
- * Disable the runtime pm for i915 device.
+ * Disables the runtime pm for i915 device.
* igt_disable_runtime_pm assumes that igt_setup_runtime_pm has already
* called to save runtime autosuspend and control attributes.
*/
@@ -683,11 +682,6 @@ void igt_disable_runtime_pm(void)
close(fd);
}
-/**
- * igt_get_runtime_pm_status:
- *
- * Returns: The current runtime PM status.
- */
static enum igt_runtime_pm_status __igt_get_runtime_pm_status(int fd)
{
ssize_t n_read;
@@ -711,6 +705,11 @@ static enum igt_runtime_pm_status __igt_get_runtime_pm_status(int fd)
return IGT_RUNTIME_PM_STATUS_UNKNOWN;
}
+/**
+ * igt_get_runtime_pm_status:
+ *
+ * Return: The current runtime PM status.
+ */
enum igt_runtime_pm_status igt_get_runtime_pm_status(void)
{
enum igt_runtime_pm_status status;
@@ -728,12 +727,6 @@ enum igt_runtime_pm_status igt_get_runtime_pm_status(void)
return status;
}
-/**
- * _pm_status_name
- * @status: runtime PM status to stringify
- *
- * Returns: The current runtime PM status as a string
- */
static const char *_pm_status_name(enum igt_runtime_pm_status status)
{
switch (status) {
@@ -757,9 +750,8 @@ static const char *_pm_status_name(enum igt_runtime_pm_status status)
* Waits until for the driver to switch to into the desired runtime PM status,
* with a 10 second timeout.
*
- * Returns:
- * True if the desired runtime PM status was attained, false if the operation
- * timed out.
+ * Return: True if the desired runtime PM status was attained, false if the
+ * operation timed out.
*/
bool igt_wait_for_pm_status(enum igt_runtime_pm_status status)
{
@@ -791,15 +783,14 @@ static const char *yesno(bool x)
}
/**
- * dmc_loaded:
- * @debugfs: fd to the debugfs dir.
+ * igt_pm_dmc_loaded:
+ * @debugfs: FD to the debugfs directory
*
* Check whether DMC FW is loaded or not. DMC FW is require for few Display C
* states like DC5 and DC6. FW does the Context Save and Restore during Display
* C States entry and exit.
*
- * Returns:
- * True if DMC FW is loaded otherwise false.
+ * Return: True if DMC FW is loaded otherwise false.
*/
bool igt_pm_dmc_loaded(int debugfs)
{
@@ -821,11 +812,11 @@ bool igt_pm_dmc_loaded(int debugfs)
/**
* igt_pm_pc8_plus_residencies_enabled:
- * @msr_fd: fd to /dev/cpu/0/msr
+ * @msr_fd: FD to /dev/cpu/0/msr
+ *
* Check whether BIOS has disabled the PC8 package deeper state.
*
- * Returns:
- * True if PC8+ package deeper state enabled on machine otherwise false.
+ * Return: True if PC8+ package deeper state enabled on machine otherwise false.
*/
bool igt_pm_pc8_plus_residencies_enabled(int msr_fd)
{
@@ -847,10 +838,10 @@ bool igt_pm_pc8_plus_residencies_enabled(int msr_fd)
* i915_output_is_lpsp_capable:
* @drm_fd: fd to drm device
* @output: igt output for which lpsp capability need to be evaluated
- * Check lpsp capability for a given output.
*
- * Returns:
- * True if given output is lpsp capable otherwise false.
+ * Checks LPSP capability for a given output.
+ *
+ * Return: True if given output is LPSP capable otherwise false.
*/
bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output)
{
@@ -887,14 +878,13 @@ static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
/**
* igt_pm_get_pcie_acpihp_slot:
- * @pci_dev: pci bridge device.
- * Get pci bridge acpi hotplug slot number, if bridge's ACPI firmware_node
+ * @pci_dev: PCI bridge device struct
+ *
+ * Gets PCI bridge acpi hotplug slot number, if bridge's ACPI firmware_node
* handle supports _SUN method.
*
- * Returns:
- * PCIe bridge Slot number.
- * Returns -ENOENT number in case firmware_node/sun is not supported by the
- * bridge.
+ * Return: PCIe bridge Slot number or -ENOENT number in case firmware_node/sun
+ * is not supported by the bridge.
*/
int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev)
{
@@ -928,11 +918,11 @@ int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev)
/**
* igt_pm_acpi_d3cold_supported:
- * @pci_dev: root port pci_dev.
- * Check ACPI D3Cold support.
+ * @pci_dev: Root port PCI device struct
+ *
+ * Checks ACPI D3Cold support.
*
- * Returns:
- * True if ACPI D3Cold supported otherwise false.
+ * Return: True if ACPI D3Cold supported otherwise false.
*/
bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev)
{
@@ -958,11 +948,11 @@ bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev)
/**
* igt_pm_get_acpi_real_d_state:
- * @pci_dev: root port pci_dev.
- * Get ACPI D state for a given root port.
+ * @pci_dev: Root port PCI device struct
*
- * Returns:
- * igt_acpi_d_state state.
+ * Gets ACPI D state for a given root port.
+ *
+ * Return: igt_acpi_d_state state.
*/
enum igt_acpi_d_state
igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev)
@@ -1155,12 +1145,9 @@ igt_pm_setup_pci_card_power_attrs(struct pci_device *pci_dev, bool save_attrs, i
/**
* igt_pm_get_autosuspend_delay:
- * @pci_dev: pci_dev.
- *
- * Get pci_dev autosuspend delay value from pci sysfs.
+ * @pci_dev: PCI device struct
*
- * Returns:
- * autosuspend_delay_ms.
+ * Return: The autosuspend delay time in milliseconds.
*/
int igt_pm_get_autosuspend_delay(struct pci_device *pci_dev)
{
@@ -1177,10 +1164,10 @@ int igt_pm_get_autosuspend_delay(struct pci_device *pci_dev)
/**
* igt_pm_set_autosuspend_delay:
- * @pci_dev: pci_dev.
- * @delay_ms: autosuspend delay in ms.
+ * @pci_dev: PCI device struct
+ * @delay_ms: Autosuspend delay in milliseconds.
*
- * Set pci_dev autosuspend delay value through pci sysfs.
+ * Sets the autosuspend delay value for the PCI device through.
*/
void igt_pm_set_autosuspend_delay(struct pci_device *pci_dev, int delay_ms)
{
@@ -1201,26 +1188,28 @@ void igt_pm_set_autosuspend_delay(struct pci_device *pci_dev, int delay_ms)
/**
* igt_pm_enable_pci_card_runtime_pm:
- * @root: root port pci_dev.
- * @i915: i915 pci_dev.
- * Enable runtime PM for all PCI endpoints devices for a given root port by
+ * @root: Root port PCI device struct
+ * @gfx: PCI device struct of graphics device
+ *
+ * Enables runtime PM for all PCI endpoints devices for a given root port by
* setting power/control attr to "auto" and setting autosuspend_delay_ms
* to zero.
*/
void igt_pm_enable_pci_card_runtime_pm(struct pci_device *root,
- struct pci_device *i915)
+ struct pci_device *gfx)
{
int delay = -1;
- if (i915)
- delay = igt_pm_get_autosuspend_delay(i915);
+ if (gfx)
+ delay = igt_pm_get_autosuspend_delay(gfx);
igt_pm_setup_pci_card_power_attrs(root, false, delay);
}
/**
* igt_pm_setup_pci_card_runtime_pm:
- * @pci_dev: root port pci_dev.
+ * @pci_dev: Root port PCI device struct
+ *
* Setup runtime PM for all PCI endpoints devices for a given root port by
* enabling runtime suspend and setting autosuspend_delay_ms to zero.
* It also saves and restore power control attribute for all PCI endpoints
@@ -1234,11 +1223,10 @@ void igt_pm_setup_pci_card_runtime_pm(struct pci_device *pci_dev)
/**
* igt_pm_get_d3cold_allowed:
- * @pci_slot_name: slot name of the pci device
- * @value: value to be read into
+ * @pci_slot_name: Slot name of the PCI device
+ * @value: Value to be read into
*
- * Reads the value of d3cold_allowed attribute
- * of the pci device
+ * Reads the value of d3cold_allowed attribute of the PCI device.
*/
void igt_pm_get_d3cold_allowed(const char *pci_slot_name, uint32_t *value)
{
@@ -1258,10 +1246,10 @@ void igt_pm_get_d3cold_allowed(const char *pci_slot_name, uint32_t *value)
/**
* igt_pm_set_d3cold_allowed:
- * @pci_slot_name: slot name of pci device
- * @value: value to be written
+ * @pci_slot_name: Slot name of PCI device
+ * @value: Value to be written
*
- * writes the value to d3cold_allowed attribute of pci device
+ * Writes the value to d3cold_allowed attribute of PCI device.
*/
void igt_pm_set_d3cold_allowed(const char *pci_slot_name, uint32_t value)
{
@@ -1294,7 +1282,8 @@ igt_pm_restore_power_attr(struct pci_device *pci_dev, const char *attr, char *va
/**
* igt_pm_restore_pci_card_runtime_pm:
- * Restore control and autosuspend_delay_ms power attribute for all
+ *
+ * Restores control and autosuspend_delay_ms power attribute for all
* PCI endpoints devices under gfx root port, which were saved earlier
* by igt_pm_setup_pci_card_runtime_pm().
*/
@@ -1342,8 +1331,9 @@ static void igt_pm_print_pci_dev_runtime_status(struct pci_device *pci_dev)
/**
* igt_pm_print_pci_card_runtime_status:
- * @pci_dev: root port pci_dev.
- * Print runtime suspend status for all PCI endpoints devices for a given
+ * @pci_dev: Root port PCI device struct
+ *
+ * Prints runtime suspend status for all PCI endpoints devices for a given
* root port.
*/
void igt_pm_print_pci_card_runtime_status(void)
@@ -1361,8 +1351,9 @@ void igt_pm_print_pci_card_runtime_status(void)
/**
* i915_is_slpc_enabled_gt:
* @drm_fd: DRM file descriptor
- * @gt: GT id
- * Check if SLPC is enabled on a GT
+ * @gt: GT ID
+ *
+ * Return: True if SLPC is enabled on a given @gt.
*/
bool i915_is_slpc_enabled_gt(int drm_fd, int gt)
{
@@ -1387,13 +1378,20 @@ bool i915_is_slpc_enabled_gt(int drm_fd, int gt)
/**
* i915_is_slpc_enabled:
* @drm_fd: DRM file descriptor
- * Check if SLPC is enabled for the device
+ *
+ * Return: True if SLPC is enabled on the device.
*/
bool i915_is_slpc_enabled(int drm_fd)
{
return i915_is_slpc_enabled_gt(drm_fd, 0);
}
+/**
+ * igt_pm_get_runtime_suspended_time:
+ * @pci_dev: PCI device struct
+ *
+ * Return: The total time that the device has been suspended.
+ */
int igt_pm_get_runtime_suspended_time(struct pci_device *pci_dev)
{
char time_str[64];
@@ -1439,9 +1437,9 @@ uint64_t igt_pm_get_runtime_active_time(struct pci_device *pci_dev)
/**
* igt_pm_get_runtime_usage:
- * @pci_dev: pci device
+ * @pci_dev: PCI device struct
*
- * Reports the runtime PM usage count of a device.
+ * Return: The runtime PM usage count of a device.
*/
int igt_pm_get_runtime_usage(struct pci_device *pci_dev)
{
@@ -1456,12 +1454,12 @@ int igt_pm_get_runtime_usage(struct pci_device *pci_dev)
}
/**
- * igt_pm_ignore_slpc_efficient_freq
+ * igt_pm_ignore_slpc_efficient_freq:
* @i915: open i915 drm file descriptor
* @gtfd: open gt sysfs fd
* @val: value to set
*
- * Ignores/un-ignores SLPC efficient frequency
+ * Ignores/un-ignores SLPC efficient frequency.
*/
void igt_pm_ignore_slpc_efficient_freq(int i915, int gtfd, bool val)
{
--
2.44.0
More information about the igt-dev
mailing list