[PATCH i-g-t v2 v2] tests/core_setmaster: simplify device handling
Bommu Krishnaiah
krishnaiah.bommu at intel.com
Fri Oct 4 15:01:33 UTC 2024
Refactored test setup to dynamically determine the correct drm card
for testing. Instead of changing permissions for all cards,
change only one that will be tested.
Problem Description:
The test fails after running the `core_hotunplug at hot*` subtest, where
Card0 is populated as card1, This leads to a failure in the subsequent
`master-drop-set-user` test.
Command sequence for reproducing the issue:
- Check available cards: `ls /dev/dri/`
- Output: by-path card0 renderD128
- Run the test: `# ./core_hotunplug --r hotrebind-lateclose`
- Check again: ‘ls /dev/dri/’
- Output after core_hotunplug : by-path card1 renderD129
- Run the test: `# ./core_setmaster --r master-drop-set-user`
- Output: gta at core_setmaster@master-drop-set-user failure
This failures on both XE and i915 for above sequence.
v2: Currented the e-mail address
Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu at intel.com>
Cc: Emil Velikov <emil.velikov at collabora.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray at intel.com>
Cc: Kamil Konieczny <kamil.konieczny at intel.com>
---
tests/core_setmaster.c | 82 ++++++++++++++++++++++++------------------
1 file changed, 47 insertions(+), 35 deletions(-)
diff --git a/tests/core_setmaster.c b/tests/core_setmaster.c
index 9c2083f66..fe9993515 100644
--- a/tests/core_setmaster.c
+++ b/tests/core_setmaster.c
@@ -107,40 +107,31 @@ static void check_drop_set(void)
drm_close_driver(master);
}
-static unsigned tweak_perm(uint8_t *saved_perm, unsigned max_perm, bool save)
+static void tweak_perm(uint8_t *saved_perm, char *path, bool save)
{
- char path[256];
struct stat st;
- unsigned i;
-
- for (i = 0; i < max_perm; i++) {
- snprintf(path, sizeof(path), "/dev/dri/card%u", i);
-
- /* Existing userspace assumes there's no gaps, do the same. */
- if (stat(path, &st) != 0)
- break;
-
- if (save) {
- /* Save and toggle */
- saved_perm[i] = st.st_mode & (S_IROTH | S_IWOTH);
- st.st_mode |= S_IROTH | S_IWOTH;
- } else {
- /* Clear and restore */
- st.st_mode &= ~(S_IROTH | S_IWOTH);
- st.st_mode |= saved_perm[i];
- }
-
- /* There's only one way for chmod to fail - race vs rmmod.
- * In that case, do _not_ error/skip, since:
- * - we need to restore the [correct] permissions
- * - __drm_open_driver() can open another device, aka the
- * failure may be irrelevant.
- */
- chmod(path, st.st_mode);
+ int ret;
+
+ if (path[0] == 0)
+ return;
+
+ ret = stat(path, &st);
+ igt_assert_f(!ret, "stat failed with %d path=%s\n", errno, path);
+
+ if (save) {
+ /* Save and toggle */
+ *saved_perm = st.st_mode & (S_IROTH | S_IWOTH);
+ st.st_mode |= S_IROTH | S_IWOTH;
+ } else {
+ /* Clear and restore */
+ st.st_mode &= ~(S_IROTH | S_IWOTH);
+ st.st_mode |= *saved_perm;
}
- return i;
-}
+ /* There's only one way for chmod to fail - race vs rmmod. */
+ ret = chmod(path, st.st_mode);
+ igt_assert_f(!ret, "chmod failed with %d path=%s\n", errno, path);
+}
igt_main
{
@@ -160,8 +151,8 @@ igt_main
igt_subtest_group {
- uint8_t saved_perm[255];
- unsigned num;
+ uint8_t saved_perm;
+ char buf[255];
/* Upon dropping root we end up as random user, which
* a) is not in the video group, and
@@ -176,8 +167,29 @@ igt_main
* restored on skip or failure.
*/
igt_fixture {
- num = tweak_perm(saved_perm, ARRAY_SIZE(saved_perm),
- true);
+ char path[255];
+ int len;
+ int fd;
+
+ memset(buf, 0, sizeof(buf));
+ saved_perm = 0;
+
+ fd = __drm_open_driver(DRIVER_ANY);
+ igt_assert_fd(fd);
+
+ snprintf(path, sizeof(path), "/proc/self/fd/%d", fd);
+
+ len = readlink(path, buf, sizeof(buf) - 1);
+ igt_assert_f(len > 0, "readlink failed with %d path=%s\n", errno, path);
+
+ buf[len] = '\0';
+ if (!(strstr(buf, "/dev/dri/card") == buf ||
+ strstr(buf, "/dev/dri/renderD") == buf))
+ igt_assert_f(0, "Not a card nor render, path=%s\n", buf);
+
+ igt_assert_eq(__drm_close_driver(fd), 0);
+
+ tweak_perm(&saved_perm, buf, true);
}
igt_describe("Ensure first normal user can Set/DropMaster");
@@ -191,7 +203,7 @@ igt_main
/* Restore the original permissions */
igt_fixture {
- tweak_perm(saved_perm, num, false);
+ tweak_perm(&saved_perm, buf, false);
}
}
--
2.34.1
More information about the igt-dev
mailing list