[PATCH i-g-t v3 1/2] tests/intel/kms_psr2_sf: Modify kms_psr2_sf test
Naladala, Ramanaidu
ramanaidu.naladala at intel.com
Wed Sep 18 12:07:30 UTC 2024
Hello,
On 9/18/2024 5:27 PM, Samala, Pranay wrote:
>
>
>> -----Original Message-----
>> From: igt-dev <igt-dev-bounces at lists.freedesktop.org> On Behalf Of Naladala,
>> Ramanaidu
>> Sent: Saturday, September 7, 2024 2:05 AM
>> To: igt-dev at lists.freedesktop.org
>> Subject: Re: [PATCH i-g-t v3 1/2] tests/intel/kms_psr2_sf: Modify kms_psr2_sf
>> test
>>
>>
>>
>> On 9/5/2024 7:12 PM, Pranay Samala wrote:
>>> In the current kms_psr2_sf tests, we identify PSR/PR/PR-SF at dynamic
>>> subtest level.
>>> This patch converts the test structure to execute on PSR/PR/PR-SF at
>>> subtest level for easy identification of tests.
>>>
>>> Signed-off-by: Pranay Samala <pranay.samala at intel.com>
>>> ---
>>> tests/intel/kms_psr2_sf.c | 809 +++++++++++++++++++-------------------
>>> 1 file changed, 407 insertions(+), 402 deletions(-)
>>>
>>> diff --git a/tests/intel/kms_psr2_sf.c b/tests/intel/kms_psr2_sf.c
>>> index 03ff1cddb..3fd814281 100644
>>> --- a/tests/intel/kms_psr2_sf.c
>>> +++ b/tests/intel/kms_psr2_sf.c
>>> @@ -44,11 +44,20 @@
>>> #include <string.h>
>>>
>>> /**
>>> - * SUBTEST: %s-plane-move-continuous-%s
>>> + * SUBTEST: psr2-%s-plane-move-continuous-%s
>>> * Description: Test that selective fetch works on moving %arg[1] plane
>> %arg[2]
>>> * visible area (no update)
>>> *
>>> - * SUBTEST: fbc-%s-plane-move-continuous-%s
>>> + * SUBTEST: pr-%s-plane-move-continuous-%s
>>> + * Description: Test that selective fetch works on moving %arg[1] plane
>> %arg[2]
>>> + * visible area (no update)
>>> + *
>>> + * SUBTEST: fbc-psr2-%s-plane-move-continuous-%s
>>> + * Description: Test that fbc with selective fetch works on moving %arg[1]
>> plane %arg[2]
>>> + * visible area (no update)
>>> + * Functionality: plane, psr2, selective_fetch, fbc
>>> + *
>>> + * SUBTEST: fbc-pr-%s-plane-move-continuous-%s
>>> * Description: Test that fbc with selective fetch works on moving %arg[1]
>> plane %arg[2]
>>> * visible area (no update)
>>> * Functionality: plane, psr2, selective_fetch, fbc @@ -66,51 +75,98
>>> @@
>>> */
>>>
>>> /**
>>> - * SUBTEST: cursor-plane-update-sf
>>> + * SUBTEST: psr2-cursor-plane-update-sf
>>> * Description: Test that selective fetch works on cursor plane
>>> *
>>> - * SUBTEST: fbc-cursor-plane-update-sf
>>> + * SUBTEST: pr-cursor-plane-update-sf
>>> + * Description: Test that selective fetch works on cursor plane
>>> + *
>>> + * SUBTEST: fbc-psr2-cursor-plane-update-sf
>>> + * Description: Test that fbc with selective fetch works on cursor
>>> + plane
>>> + * Functionality: plane, psr2, selective_fetch, fbc
>>> + *
>>> + * SUBTEST: fbc-pr-cursor-plane-update-sf
>>> * Description: Test that fbc with selective fetch works on cursor plane
>>> * Functionality: plane, psr2, selective_fetch, fbc
>>> *
>>> - * SUBTEST: overlay-plane-update-continuous-sf
>>> + * SUBTEST: psr2-overlay-plane-update-continuous-sf
>>> * Description: Test that selective fetch works on overlay plane
>>> *
>>> - * SUBTEST: fbc-overlay-plane-update-sf-dmg-area
>>> + * SUBTEST: pr-overlay-plane-update-continuous-sf
>>> + * Description: Test that selective fetch works on overlay plane
>>> + *
>>> + * SUBTEST: fbc-psr2-overlay-plane-update-sf-dmg-area
>>> + * Description: Test that fbc with selective fetch works on overlay
>>> + plane
>>> + * Functionality: plane, psr2, selective_fetch, fbc
>>> + *
>>> + * SUBTEST: fbc-pr-overlay-plane-update-sf-dmg-area
>>> * Description: Test that fbc with selective fetch works on overlay plane
>>> * Functionality: plane, psr2, selective_fetch, fbc
>>> *
>>> - * SUBTEST: overlay-plane-update-sf-dmg-area
>>> + * SUBTEST: psr2-overlay-plane-update-sf-dmg-area
>>> + * Description: Test that selective fetch works on overlay plane
>>> + *
>>> + * SUBTEST: pr-overlay-plane-update-sf-dmg-area
>>> * Description: Test that selective fetch works on overlay plane
>>> *
>>> - * SUBTEST: fbc-overlay-plane-update-continuous-sf
>>> + * SUBTEST: fbc-psr2-overlay-plane-update-continuous-sf
>>> * Description: Test that fbc with selective fetch works on overlay plane
>>> * Functionality: plane, psr2, selective_fetch, fbc
>>> *
>>> - * SUBTEST: overlay-primary-update-sf-dmg-area
>>> + * SUBTEST: fbc-pr-overlay-plane-update-continuous-sf
>>> + * Description: Test that fbc with selective fetch works on overlay
>>> + plane
>>> + * Functionality: plane, psr2, selective_fetch, fbc
>>> + *
>>> + * SUBTEST: psr2-overlay-primary-update-sf-dmg-area
>>> + * Description: Test that selective fetch works on primary plane with blended
>>> + * overlay plane
>>> + *
>>> + * SUBTEST: pr-overlay-primary-update-sf-dmg-area
>>> * Description: Test that selective fetch works on primary plane with blended
>>> * overlay plane
>>> *
>>> - * SUBTEST: fbc-overlay-primary-update-sf-dmg-area
>>> + * SUBTEST: fbc-psr2-overlay-primary-update-sf-dmg-area
>>> * Description: Test that fbc with selective fetch works on primary plane with
>> blended
>>> * overlay plane
>>> * Functionality: plane, psr2, selective_fetch, fbc
>>> *
>>> - * SUBTEST: plane-move-sf-dmg-area
>>> + * SUBTEST: fbc-pr-overlay-primary-update-sf-dmg-area
>>> + * Description: Test that fbc with selective fetch works on primary plane with
>> blended
>>> + * overlay plane
>>> + * Functionality: plane, psr2, selective_fetch, fbc
>>> + *
>>> + * SUBTEST: psr2-plane-move-sf-dmg-area
>>> * Description: Test that selective fetch works on moving overlay plane
>>> *
>>> - * SUBTEST: fbc-plane-move-sf-dmg-area
>>> + * SUBTEST: pr-plane-move-sf-dmg-area
>>> + * Description: Test that selective fetch works on moving overlay
>>> + plane
>>> + *
>>> + * SUBTEST: fbc-psr2-plane-move-sf-dmg-area
>>> * Description: Test that fbc with selective fetch works on moving overlay plane
>>> * Functionality: plane, psr2, selective_fetch, fbc
>>> *
>>> - * SUBTEST: primary-plane-update-sf-dmg-area
>>> + * SUBTEST: fbc-pr-plane-move-sf-dmg-area
>>> + * Description: Test that fbc with selective fetch works on moving
>>> + overlay plane
>>> + * Functionality: plane, psr2, selective_fetch, fbc
>>> + *
>>> + * SUBTEST: psr2-primary-plane-update-sf-dmg-area
>>> + * Description: Test that selective fetch works on primary plane
>>> + *
>>> + * SUBTEST: pr-primary-plane-update-sf-dmg-area
>>> * Description: Test that selective fetch works on primary plane
>>> *
>>> - * SUBTEST: fbc-primary-plane-update-sf-dmg-area
>>> + * SUBTEST: fbc-psr2-primary-plane-update-sf-dmg-area
>>> * Description: Test that fbc with selective fetch works on primary plane
>>> * Functionality: plane, psr2, selective_fetch, fbc
>>> *
>>> - * SUBTEST: primary-plane-update-sf-dmg-area-big-fb
>>> + * SUBTEST: fbc-pr-primary-plane-update-sf-dmg-area
>>> + * Description: Test that fbc with selective fetch works on primary
>>> + plane
>>> + * Functionality: plane, psr2, selective_fetch, fbc
>>> + *
>>> + * SUBTEST: psr2-primary-plane-update-sf-dmg-area-big-fb
>>> + * Description: Test that selective fetch works on primary plane with
>>> + big fb
>>> + *
>>> + * SUBTEST: pr-primary-plane-update-sf-dmg-area-big-fb
>>> * Description: Test that selective fetch works on primary plane with big fb
>>> */
>>>
>>> @@ -216,23 +272,6 @@ static bool set_sel_fetch_mode_for_output(data_t
>> *data)
>>> return supported;
>>> }
>>>
>>> -static const char *get_psr_mode_str_for_output(data_t *data) -{
>>> - static const char *psr_mode;
>>> -
>>> - switch (data->psr_mode) {
>>> - case PSR_MODE_2:
>>> - psr_mode = "psr2";
>>> - break;
>>> - case PR_MODE_SEL_FETCH:
>>> - psr_mode = "pr";
>>> - break;
>>> - default:
>>> - psr_mode = "";
>>> - }
>>> - return psr_mode;
>>> -}
>>> -
>>> static const char *op_str(enum operations op)
>>> {
>>> static const char * const name[] = { @@ -1045,13 +1084,95 @@
>>> pipe_output_combo_valid(igt_display_t *display,
>>> return ret;
>>> }
>>>
>>> +static bool check_psr_mode_supported(data_t *data, int psr_stat) {
>>> + if (data->psr_mode == psr_stat)
>>> + return true;
>>> + else
>>> + return false;
>>> +}
>>> +
>>> +static void run_dynamic_test_damage_areas(data_t data, int i, int
>>> +coexist_features[]) {
>>> + for (int j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
>>> + if (j != FEATURE_NONE && !(coexist_features[i] & j))
>>> + continue;
>>> + igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(data.pipe),
>>> + igt_output_name(data.output),
>> coexist_feature_str(j)) {
>>> + data.coexist_feature = j;
>>> + for (int k = 1; k <= MAX_DAMAGE_AREAS; k++) {
>>> + data.damage_area_count = k;
>>> + prepare(&data);
>>> + run(&data);
>>> + cleanup(&data);
>>> + }
>>> + }
>>> + }
>>> +}
>> imho you should split all new functions into different patches.
>>> +
>>> +static void run_dynamic_test(data_t data, int i, int
>>> +coexist_features[]) {
>>> + for (int j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
>>> + if (j != FEATURE_NONE && !(coexist_features[i] & j))
>>> + continue;
>>> + igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(data.pipe),
>>> + igt_output_name(data.output),
>> coexist_feature_str(j)) {
>>> + data.coexist_feature = j;
>>> + prepare(&data);
>>> + run(&data);
>>> + cleanup(&data);
>>> + }
>>> + }
>>> +}
>>> +
>>> +static void run_plane_move(data_t data, int i, int
>>> +coexist_features[]) {
>>> + for (int j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
>>> + if (j != FEATURE_NONE && !(coexist_features[i] & j))
>>> + continue;
>>> + igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(data.pipe),
>>> + igt_output_name(data.output),
>> coexist_feature_str(j)) {
>>> + data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
>>> + data.coexist_feature = j;
>>> + for (int k = POS_TOP_LEFT; k <= POS_BOTTOM_RIGHT;
>> k++) {
>>> + data.pos = k;
>>> + prepare(&data);
>>> + run(&data);
>>> + cleanup(&data);
>>> + }
>>> + }
>>> + }
>>> +}
>>> +
>>> +static void run_plane_update_continuous(data_t data, int i, int
>>> +coexist_features[]) {
>>> + for (int j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
>>> + if (j != FEATURE_NONE && !(coexist_features[i] & j))
>>> + continue;
>>> + igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(data.pipe),
>>> + igt_output_name(data.output),
>> coexist_feature_str(j)) {
>>> + data.damage_area_count = 1;
>>> + if (data.op_fbc_mode == FBC_ENABLED)
>>> + data.primary_format =
>> DRM_FORMAT_XRGB8888;
>>> + else
>>> + data.primary_format = DRM_FORMAT_NV12;
>>> +
>>> + data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
>>> + data.coexist_feature = j;
>>> + prepare(&data);
>>> + run(&data);
>>> + cleanup(&data);
>>> + }
>>> + }
>>> +}
>> I did not find much difference between run_plane_update_continuous and
>> run_dynamic_test. I think the continuous update function loop is missing.
>
> Continuous plane update is happening inside the run function itself.
> -Pranay
Thanks for the clarification.
LGTM,
Reviewed-by: Naladala Ramanaidu <ramanaidu.naladala at intel.com>
>
>>> +
>>> igt_main
>>> {
>>> bool output_supports_pr_psr2_sel_fetch = false;
>>> bool pr_psr2_sel_fetch_supported = false;
>>> data_t data = {};
>>> igt_output_t *outputs[IGT_MAX_PIPES * IGT_MAX_PIPES];
>>> - int i, j, k, y;
>>> + int i, y, z;
>>> int pipes[IGT_MAX_PIPES * IGT_MAX_PIPES];
>>> int n_pipes = 0;
>>> int coexist_features[IGT_MAX_PIPES * IGT_MAX_PIPES]; @@ -1061,6
>>> +1182,12 @@ igt_main
>>> };
>>> int fbc_status[] = {FBC_DISABLED, FBC_ENABLED};
>>>
>>> + const char *append_psr_subtest[2] = {
>>> + "psr2-",
>>> + "pr-"
>>> + };
>>> + int psr_status[] = {PSR_MODE_2, PR_MODE_SEL_FETCH};
>>> +
>>> igt_fixture {
>>> drmModeResPtr res;
>>>
>>> @@ -1103,430 +1230,308 @@ igt_main
>>> }
>>>
>>> for (y = 0; y < ARRAY_SIZE(fbc_status); y++) {
>>> - data.op = PLANE_UPDATE;
>>> - data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
>>> - data.primary_format = DRM_FORMAT_XRGB8888;
>>> - data.big_fb_test = 0;
>>> -
>>> - data.op_fbc_mode = fbc_status[y];
>>> - /* Verify primary plane selective fetch */
>>> - igt_describe("Test that selective fetch works on primary plane");
>>> - igt_subtest_with_dynamic_f("%sprimary-%s-sf-dmg-area",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + for (z = 0; z < ARRAY_SIZE(psr_status); z++) {
>>> + data.op = PLANE_UPDATE;
>>> + data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
>>> + data.primary_format = DRM_FORMAT_XRGB8888;
>>> + data.big_fb_test = 0;
>>> +
>>> + data.op_fbc_mode = fbc_status[y];
>>> + data.psr_mode = psr_status[z];
>>> +
>>> + /* Verify primary plane selective fetch */
>>> + igt_describe("Test that selective fetch works on primary
>> plane");
>>> + igt_subtest_with_dynamic_f("%s%sprimary-%s-sf-dmg-
>> area",
>>> + append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>>> + op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>> outputs[i]))
>>> + continue;
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> +
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> +
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_PRIMARY;
>>> + run_dynamic_test_damage_areas(data,
>> i, coexist_features);
>>> + }
>>> + }
>>> +
>>> + /* Verify primary plane selective fetch with big fb */
>>> + if (data.op_fbc_mode == FBC_DISABLED) {
>>> + data.big_fb_test = 1;
>>> + igt_describe("Test that selective fetch works on
>> primary plane "
>>> + "with big fb");
>>> + igt_subtest_with_dynamic_f("%s%sprimary-%s-
>> sf-dmg-area-big-fb",
>>> +
>> append_fbc_subtest[y],
>>> +
>> append_psr_subtest[z],
>>> + op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> +
>> pipes[i], outputs[i]))
>>> + continue;
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is
>> not supported\n");
>>> + if
>> (!check_psr_mode_supported(&data, psr_status[z]))
>>> + continue;
>>> +
>>> data.test_plane_id =
>> DRM_PLANE_TYPE_PRIMARY;
>>> - data.coexist_feature = j;
>>> - for (k = 1; k <=
>> MAX_DAMAGE_AREAS; k++) {
>>> -
>> data.damage_area_count = k;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> +
>> run_dynamic_test_damage_areas(data, i,
>>> +
>> coexist_features);
>>> }
>>> }
>>> }
>>> - }
>>>
>>> - /* Verify primary plane selective fetch with big fb */
>>> - if (data.op_fbc_mode == FBC_DISABLED) {
>>> - data.big_fb_test = 1;
>>> - igt_describe("Test that selective fetch works on primary
>> plane with "
>>> - "big fb");
>>> - igt_subtest_with_dynamic_f("%sprimary-%s-sf-dmg-
>> area-big-fb",
>>> - append_fbc_subtest[y],
>> op_str(data.op)) {
>>> + data.big_fb_test = 0;
>>> + /* Verify overlay plane selective fetch */
>>> + igt_describe("Test that selective fetch works on overlay
>> plane");
>>> + igt_subtest_with_dynamic_f("%s%soverlay-%s-sf-dmg-
>> area",
>>> + append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>>> + op_str(data.op)) {
>>> for (i = 0; i < n_pipes; i++) {
>>> - if
>> (!pipe_output_combo_valid(&data.display, pipes[i],
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> outputs[i]))
>>> continue;
>>> data.pipe = pipes[i];
>>> data.output = outputs[i];
>>>
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective
>> fetch is not supported\n");
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>>
>>> - for (j = FEATURE_NONE; j <
>> FEATURE_COUNT; j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> - continue;
>>> - igt_dynamic_f("%s-pipe-%s-
>> %s%s",
>>> -
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> -
>> coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_PRIMARY;
>>> - data.coexist_feature =
>> j;
>>> -
>>> - for (k = 1; k <=
>> MAX_DAMAGE_AREAS; k++) {
>>> -
>> data.damage_area_count = k;
>>> -
>> prepare(&data);
>>> - run(&data);
>>> -
>> cleanup(&data);
>>> - }
>>> - }
>>> - }
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> + run_dynamic_test_damage_areas(data,
>> i, coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - data.big_fb_test = 0;
>>> - /* Verify overlay plane selective fetch */
>>> - igt_describe("Test that selective fetch works on overlay plane");
>>> - igt_subtest_with_dynamic_f("%soverlay-%s-sf-dmg-area",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + data.damage_area_count = 1;
>>> + /* Verify cursor plane selective fetch */
>>> + igt_describe("Test that selective fetch works on cursor
>> plane");
>>> + igt_subtest_with_dynamic_f("%s%scursor-%s-sf",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> - data.coexist_feature = j;
>>> -
>>> - for (k = 1; k <=
>> MAX_DAMAGE_AREAS; k++) {
>>> -
>> data.damage_area_count = k;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> - }
>>> - }
>>> - }
>>> - }
>>> -
>>> - data.damage_area_count = 1;
>>> - /* Verify cursor plane selective fetch */
>>> - igt_describe("Test that selective fetch works on cursor plane");
>>> - igt_subtest_with_dynamic_f("%scursor-%s-sf",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_CURSOR;
>>> - data.coexist_feature = j;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> +
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_CURSOR;
>>> + run_dynamic_test(data, i,
>> coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - data.op = PLANE_MOVE_CONTINUOUS;
>>> - igt_describe("Test that selective fetch works on moving cursor
>> plane (no update)");
>>> - igt_subtest_with_dynamic_f("%scursor-%s-sf",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + data.op = PLANE_MOVE_CONTINUOUS;
>>> + igt_describe("Test that selective fetch works on "
>>> + "moving cursor plane (no update)");
>>> + igt_subtest_with_dynamic_f("%s%scursor-%s-sf",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_CURSOR;
>>> - data.coexist_feature = j;
>>> -
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_CURSOR;
>>> + run_dynamic_test(data, i,
>> coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
>>> - igt_describe("Test that selective fetch works on moving cursor
>> plane exceeding "
>>> - "partially visible area (no update)");
>>> - igt_subtest_with_dynamic_f("%scursor-%s-sf",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
>>> + igt_describe("Test that selective fetch works on moving
>> cursor "
>>> + "plane exceeding partially visible area (no
>> update)");
>>> + igt_subtest_with_dynamic_f("%s%scursor-%s-sf",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_CURSOR;
>>> - data.coexist_feature = j;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_CURSOR;
>>> + run_dynamic_test(data, i,
>> coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - data.op = PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
>>> - igt_describe("Test that selective fetch works on moving cursor
>> plane exceeding "
>>> - "fully visible area (no update)");
>>> - igt_subtest_with_dynamic_f("%scursor-%s-sf",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + data.op =
>> PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
>>> + igt_describe("Test that selective fetch works on moving
>> cursor plane "
>>> + "exceeding fully visible area (no update)");
>>> + igt_subtest_with_dynamic_f("%s%scursor-%s-sf",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_CURSOR;
>>> - data.coexist_feature = j;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_CURSOR;
>>> + run_dynamic_test(data, i,
>> coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - /* Only for overlay plane */
>>> - data.op = PLANE_MOVE;
>>> - /* Verify overlay plane move selective fetch */
>>> - igt_describe("Test that selective fetch works on moving overlay
>> plane");
>>> - igt_subtest_with_dynamic_f("%s%s-sf-dmg-area",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + /* Only for overlay plane */
>>> + data.op = PLANE_MOVE;
>>> + /* Verify overlay plane move selective fetch */
>>> + igt_describe("Test that selective fetch works on moving
>> overlay plane");
>>> + igt_subtest_with_dynamic_f("%s%s%s-sf-dmg-area",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>>> -
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> - data.coexist_feature = j;
>>> - for (k = POS_TOP_LEFT; k <=
>> POS_BOTTOM_RIGHT ; k++) {
>>> - data.pos = k;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> - }
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> + run_plane_move(data, i,
>> coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - data.op = PLANE_MOVE_CONTINUOUS;
>>> - igt_describe("Test that selective fetch works on moving overlay
>> plane (no update)");
>>> - igt_subtest_with_dynamic_f("%soverlay-%s-sf",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + data.op = PLANE_MOVE_CONTINUOUS;
>>> + igt_describe("Test that selective fetch works on moving
>> overlay "
>>> + "plane (no update)");
>>> + igt_subtest_with_dynamic_f("%s%soverlay-%s-sf",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> - data.coexist_feature = j;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> + run_dynamic_test(data, i,
>> coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
>>> - igt_describe("Test that selective fetch works on moving overlay
>> plane partially "
>>> - "exceeding visible area (no update)");
>>> - igt_subtest_with_dynamic_f("%soverlay-%s-sf",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
>>> + igt_describe("Test that selective fetch works on moving
>> overlay "
>>> + "plane partially exceeding visible area (no
>> update)");
>>> + igt_subtest_with_dynamic_f("%s%soverlay-%s-sf",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> - data.coexist_feature = j;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> + run_dynamic_test(data, i,
>> coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - data.op = PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
>>> - igt_describe("Test that selective fetch works on moving overlay
>> plane fully "
>>> - "exceeding visible area (no update)");
>>> - igt_subtest_with_dynamic_f("%soverlay-%s-sf",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + data.op =
>> PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
>>> + igt_describe("Test that selective fetch works on moving
>> overlay plane "
>>> + "fully exceeding visible area (no update)");
>>> + igt_subtest_with_dynamic_f("%s%soverlay-%s-sf",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display, pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> - data.coexist_feature = j;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> + run_dynamic_test(data, i,
>> coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - /* Verify primary plane selective fetch with overplay plane
>> blended */
>>> - data.op = OVERLAY_PRIM_UPDATE;
>>> - igt_describe("Test that selective fetch works on primary plane "
>>> - "with blended overlay plane");
>>> - igt_subtest_with_dynamic_f("%s%s-sf-dmg-area",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + /* Verify primary plane selective fetch with overplay
>> plane blended */
>>> + data.op = OVERLAY_PRIM_UPDATE;
>>> + igt_describe("Test that selective fetch works on primary
>> plane "
>>> + "with blended overlay plane");
>>> + igt_subtest_with_dynamic_f("%s%s%s-sf-dmg-area",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> kmstest_pipe_name(pipes[i]),
>>> -
>> get_psr_mode_str_for_output(&data),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - for (k = 1; k <=
>> MAX_DAMAGE_AREAS; k++) {
>>> -
>> data.damage_area_count = k;
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_PRIMARY;
>>> - data.coexist_feature =
>> j;
>>> -
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> - }
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> + data.test_plane_id =
>> DRM_PLANE_TYPE_PRIMARY;
>>> + run_dynamic_test_damage_areas(data,
>> i, coexist_features);
>>> }
>>> }
>>> - }
>>>
>>> - /*
>>> - * Verify overlay plane selective fetch using NV12 primary
>>> - * plane and continuous updates.
>>> - */
>>> - data.op = PLANE_UPDATE_CONTINUOUS;
>>> - igt_describe("Test that selective fetch works on overlay plane");
>>> - igt_subtest_with_dynamic_f("%soverlay-%s-sf",
>> append_fbc_subtest[y],
>>> - op_str(data.op)) {
>>> - for (i = 0; i < n_pipes; i++) {
>>> - if (!pipe_output_combo_valid(&data.display,
>> pipes[i], outputs[i]))
>>> - continue;
>>> - data.pipe = pipes[i];
>>> - data.output = outputs[i];
>>> -
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> - "Selective fetch is not
>> supported\n");
>>> -
>>> - for (j = FEATURE_NONE; j < FEATURE_COUNT;
>> j++) {
>>> - if (j != FEATURE_NONE &&
>> !(coexist_features[i] & j))
>>> + /*
>>> + * Verify overlay plane selective fetch using NV12
>> primary
>>> + * plane and continuous updates.
>>> + */
>>> + data.op = PLANE_UPDATE_CONTINUOUS;
>>> + igt_describe("Test that selective fetch works on overlay
>> plane");
>>> + igt_subtest_with_dynamic_f("%s%soverlay-%s-sf",
>> append_fbc_subtest[y],
>>> + append_psr_subtest[z],
>> op_str(data.op)) {
>>> + for (i = 0; i < n_pipes; i++) {
>>> + if
>> (!pipe_output_combo_valid(&data.display,
>>> + pipes[i],
>>> + outputs[i]))
>>> continue;
>>> - igt_dynamic_f("%s-pipe-%s-%s%s",
>> get_psr_mode_str_for_output(&data),
>>> -
>> kmstest_pipe_name(pipes[i]),
>>> -
>> igt_output_name(outputs[i]),
>>> - coexist_feature_str(j)) {
>>> - data.damage_area_count = 1;
>>> - if (data.op_fbc_mode ==
>> FBC_ENABLED)
>>> - data.primary_format =
>> DRM_FORMAT_XRGB8888;
>>> - else
>>> - data.primary_format =
>> DRM_FORMAT_NV12;
>>> - data.test_plane_id =
>> DRM_PLANE_TYPE_OVERLAY;
>>> - data.coexist_feature = j;
>>> - prepare(&data);
>>> - run(&data);
>>> - cleanup(&data);
>>> - }
>>> + data.pipe = pipes[i];
>>> + data.output = outputs[i];
>>> +
>> igt_assert_f(set_sel_fetch_mode_for_output(&data),
>>> + "Selective fetch is not
>> supported\n");
>>> + if (!check_psr_mode_supported(&data,
>> psr_status[z]))
>>> + continue;
>>> +
>>> + run_plane_update_continuous(data, i,
>> coexist_features);
>>> }
>>> }
>>> }
>
More information about the igt-dev
mailing list