[PATCH i-g-t v5] tests/intel/kms_pm_dc: Remove PKGC10 dependency to validate DC6

[Imre Deak]

On Wed, Apr 09, 2025 at 03:15:44AM +0530, Mohammed Thasleem wrote:
> DC6 counter was removed MTL onwards, so pkc10 counter is used
> to validated DC6 tests but with the new approach of kmd changes
> created DC6 debugfs entry counter to validated DC6 tests and
> removeing the existing PKGC10 code.
> 
> v2: Update debugfs message.
> v3: Remove display version check. (Imre)
>     Update commit subject and description.
> v4: Add find_counter() helper for dc6 counter value parsing. (Imre)
>     Remove redundant code and update assert string. (Imre)
> v5: Rename find_counter with get_dc6_counter. (Imre)
>     Send buffer instead of sending separate strings. (Imre)
> 
> Signed-off-by: Mohammed Thasleem <mohammed.thasleem at intel.com>

Reviewed-by: Imre Deak <imre.deak at intel.com>

> ---
>  tests/intel/kms_pm_dc.c | 78 ++++++++++-------------------------------
>  1 file changed, 18 insertions(+), 60 deletions(-)
> 
> diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
> index 2491cd1f8..8cdf312f6 100644
> --- a/tests/intel/kms_pm_dc.c
> +++ b/tests/intel/kms_pm_dc.c
> @@ -273,6 +273,17 @@ static uint32_t get_dc_counter(char *dc_data)
>  	return ret;
>  }
>  
> +static char *get_dc6_counter(const char *buf)
> +{
> +	char *str;
> +
> +	str = strstr(buf, "DC5 -> DC6 count");
> +	if (!str)
> +		str = strstr(buf, "DC5 -> DC6 allowed count");
> +
> +	return str;
> +}
> +
>  static uint32_t read_dc_counter(uint32_t debugfs_fd, int dc_flag)
>  {
>  	char buf[4096];
> @@ -284,8 +295,8 @@ static uint32_t read_dc_counter(uint32_t debugfs_fd, int dc_flag)
>  		str = strstr(buf, "DC3 -> DC5 count");
>  		igt_assert_f(str, "DC5 counter is not available\n");
>  	} else if (dc_flag & CHECK_DC6) {
> -		str = strstr(buf, "DC5 -> DC6 count");
> -		igt_assert_f(str, "DC6 counter is not available\n");
> +		str = get_dc6_counter(buf);
> +		igt_assert_f(str, "No DC6 counter available\n");
>  	} else if (dc_flag & CHECK_DC3CO) {
>  		str = strstr(buf, "DC3CO count");
>  		igt_assert_f(str, "DC3CO counter is not available\n");
> @@ -376,6 +387,7 @@ static void check_dc3co_with_videoplayback_like_load(data_t *data)
>  
>  static void require_dc_counter(int debugfs_fd, int dc_flag)
>  {
> +	char *str;
>  	char buf[4096];
>  
>  	igt_debugfs_simple_read(debugfs_fd, "i915_dmc_info",
> @@ -391,8 +403,8 @@ static void require_dc_counter(int debugfs_fd, int dc_flag)
>  			      "DC5 counter is not available\n");
>  		break;
>  	case CHECK_DC6:
> -		igt_skip_on_f(!strstr(buf, "DC5 -> DC6 count"),
> -			      "DC6 counter is not available\n");
> +		str = get_dc6_counter(buf);
> +		igt_skip_on_f(!str, "No DC6 counter available\n");
>  		break;
>  	default:
>  		igt_assert_f(0, "Unknown DC counter %d\n", dc_flag);
> @@ -417,20 +429,6 @@ static void test_dc3co_vpb_simulation(data_t *data)
>  	cleanup_dc3co_fbs(data);
>  }
>  
> -static void psr_dpms(data_t *data, int mode)
> -{
> -	igt_output_t *output;
> -
> -	for_each_connected_output(&data->display, output) {
> -		drmModeConnectorPtr connector = output->config.connector;
> -
> -		if (connector->connector_type == DRM_MODE_CONNECTOR_eDP)
> -			continue;
> -
> -		kmstest_set_connector_dpms(data->drm_fd, connector, mode);
> -	}
> -}
> -
>  static void test_dc5_retention_flops(data_t *data, int dc_flag)
>  {
>  	uint32_t dc_counter_before_psr;
> @@ -721,40 +719,6 @@ static void test_deep_pkgc_state(data_t *data)
>  	igt_assert_f(pkgc_flag, "PKGC10 is not achieved.\n");
>  }
>  
> -static void test_pkgc_state_dpms(data_t *data)
> -{
> -	unsigned int timeout_sec = 6;
> -	unsigned int prev_value = 0, cur_value = 0;
> -
> -	prev_value = read_pkgc_counter(data->debugfs_root_fd);
> -	setup_dc_dpms(data);
> -	dpms_off(data);
> -	igt_wait((cur_value = read_pkgc_counter(data->debugfs_root_fd)) > prev_value,
> -		  timeout_sec * 1000, 100);
> -	igt_assert_f(cur_value > prev_value, "PKGC10 is not achieved.\n");
> -	dpms_on(data);
> -	cleanup_dc_dpms(data);
> -}
> -
> -static void test_pkgc_state_psr(data_t *data)
> -{
> -	unsigned int timeout_sec = 6;
> -	unsigned int prev_value = 0, cur_value = 0;
> -
> -	prev_value = read_pkgc_counter(data->debugfs_root_fd);
> -	setup_output(data);
> -	setup_primary(data);
> -	igt_require(!psr_disabled_check(data->debugfs_fd));
> -	igt_assert(psr_wait_entry(data->debugfs_fd, data->op_psr_mode, NULL));
> -	psr_dpms(data, DRM_MODE_DPMS_OFF);
> -	igt_wait((cur_value = read_pkgc_counter(data->debugfs_root_fd)) > prev_value,
> -		  timeout_sec * 1000, 100);
> -	igt_assert_f(cur_value > prev_value, "PKGC10 is not achieved.\n");
> -	psr_sink_error_check(data->debugfs_fd, data->op_psr_mode, data->output);
> -	psr_dpms(data, DRM_MODE_DPMS_ON);
> -	cleanup_dc_psr(data);
> -}
> -
>  static void kms_poll_state_restore(int sig)
>  {
>  	int sysfs_fd;
> @@ -818,10 +782,7 @@ igt_main
>  		psr_enable(data.drm_fd, data.debugfs_fd, data.op_psr_mode, NULL);
>  		igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
>  			      "PC8+ residencies not supported\n");
> -		if (intel_display_ver(data.devid) >= 14)
> -			test_pkgc_state_psr(&data);
> -		else
> -			test_dc_state_psr(&data, CHECK_DC6);
> +		test_dc_state_psr(&data, CHECK_DC6);
>  	}
>  
>  	igt_describe("This test validates display engine entry to PKGC10 state "
> @@ -866,10 +827,7 @@ igt_main
>  	igt_subtest("dc6-dpms") {
>  		igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
>  			      "PC8+ residencies not supported\n");
> -		if (intel_display_ver(data.devid) >= 14)
> -			test_pkgc_state_dpms(&data);
> -		else
> -			test_dc_state_dpms(&data, CHECK_DC6);
> +		test_dc_state_dpms(&data, CHECK_DC6);
>  
>  	}
>  
> -- 
> 2.43.0
>