[PATCH 1/1] tests/intel/xe_eu_stall: Add tests to run blocking and non-blocking read twice

Harish Chegondi harish.chegondi at intel.com
Wed Apr 23 22:02:30 UTC 2025


On Wed, Apr 23, 2025 at 10:20:06AM -0700, Dixit, Ashutosh wrote:
> On Tue, 22 Apr 2025 19:57:34 -0700, Harish Chegondi wrote:
> >
> > Add tests that enable EU stall sampling, read all the EU stall data and
> > disable EU stall sampling, two times back to back. Add tests for both
> > blocking and non-blocking reads. Also, add a check for the presence of
> > /proc/sys/dev/xe/observation_paranoid file which is required for the
> > unprivileged-access test.
> >
> > Signed-off-by: Harish Chegondi <harish.chegondi at intel.com>
> > ---
> >  tests/intel/xe_eu_stall.c | 44 ++++++++++++++++++++++++++++++---------
> >  1 file changed, 34 insertions(+), 10 deletions(-)
> >
> > diff --git a/tests/intel/xe_eu_stall.c b/tests/intel/xe_eu_stall.c
> > index da9bd7843..15d4589c6 100644
> > --- a/tests/intel/xe_eu_stall.c
> > +++ b/tests/intel/xe_eu_stall.c
> > @@ -14,9 +14,15 @@
> >   * SUBTEST: non-blocking-read
> >   * Description: Verify non-blocking read of EU stall data during a workload run
> >   *
> > + * SUBTEST: non-blocking-read-twice
> > + * Description: Run non-blocking read test twice with disable and enable between the runs
> > + *
> >   * SUBTEST: blocking-read
> >   * Description: Verify blocking read of EU stall data during a workload run
> >   *
> > + * SUBTEST: blocking-read-twice
> > + * Description: Run blocking read test twice with disable and enable between the runs
> > + *
> 
> Not sure about the "read-twice" name, i.e. not sure if that name clearly
> communicates the purpose of these new tests. The purpose to me seems that
> reads can be done after a disable and enable, correct?
> 
> Maybe "blocking-enable-disable" and "non-blocking-enable-disable" are
> better names?
Yes I will change the names. How about non-blocking-read-after-re-enable
and blocking-read-after-re-enable ? This would convey that the test
would enable two times and a read after the second enable ?
> 
> Otherwise this is:
> 
> Reviewed-by: Ashutosh Dixit <ashutosh.dixit at intel.com>
> 
> Let me know if you are going to change the names. Thanks.
> 
> >   * SUBTEST: unprivileged-access
> >   * Description: Verify unprivileged open of a EU stall data stream fd
> >   *
> > @@ -33,6 +39,7 @@
> >  #include <fcntl.h>
> >  #include <poll.h>
> >  #include <sys/ioctl.h>
> > +#include <sys/stat.h>
> >  #include <sys/wait.h>
> >
> >  #include "igt.h"
> > @@ -460,13 +467,13 @@ static void print_eu_stall_data(uint32_t devid, uint8_t *buf, size_t size)
> >   * while the parent process reads the stall counters data, disables EU stall
> >   * counters once the workload completes execution.
> >   */
> > -static void test_eustall(int drm_fd, uint32_t devid, bool blocking_read)
> > +static void test_eustall(int drm_fd, uint32_t devid, bool blocking_read, int iter)
> >  {
> > -	uint32_t num_samples = 0, num_drops = 0;
> > +	uint32_t num_samples, num_drops;
> >	struct igt_helper_process work_load = {};
> >	struct sigaction sa = { 0 };
> >	int ret, flags, stream_fd;
> > -	uint64_t total_size = 0;
> > +	uint64_t total_size;
> >	uint8_t *buf;
> >
> >	uint64_t properties[] = {
> > @@ -520,7 +527,7 @@ static void test_eustall(int drm_fd, uint32_t devid, bool blocking_read)
> >		flags = O_CLOEXEC;
> >
> >	set_fd_flags(stream_fd, flags);
> > -
> > +enable:
> >	do_ioctl(stream_fd, DRM_XE_OBSERVATION_IOCTL_ENABLE, 0);
> >
> >	sa.sa_handler = sighandler;
> > @@ -540,6 +547,9 @@ static void test_eustall(int drm_fd, uint32_t devid, bool blocking_read)
> >			_exit(run_gpgpu_fill(drm_fd, devid));
> >		}
> >	}
> > +	total_size = 0;
> > +	num_samples = 0;
> > +	num_drops = 0;
> >	/* Parent process reads the EU stall counters data */
> >	do {
> >		if (!blocking_read) {
> > @@ -574,14 +584,16 @@ static void test_eustall(int drm_fd, uint32_t devid, bool blocking_read)
> >	igt_info("Number of samples: %u\n", num_samples);
> >	igt_info("Number of drops reported: %u\n", num_drops);
> >
> > +	ret = wait_child(&work_load);
> > +	igt_assert_f(ret == 0, "waitpid() - ret: %d, errno: %d\n", ret, errno);
> > +	igt_assert_f(num_samples, "No EU stalls detected during the workload\n");
> > +
> >	do_ioctl(stream_fd, DRM_XE_OBSERVATION_IOCTL_DISABLE, 0);
> > +	if (--iter)
> > +		goto enable;
> >
> >	close(stream_fd);
> >	free(buf);
> > -
> > -	ret = wait_child(&work_load);
> > -	igt_assert_f(ret == 0, "waitpid() - ret: %d, errno: %d\n", ret, errno);
> > -	igt_assert_f(num_samples, "No EU stalls detected during the workload\n");
> >  }
> >
> >  static int opt_handler(int opt, int opt_index, void *data)
> > @@ -634,6 +646,7 @@ igt_main_args("e:g:o:r:u:w:", long_options, help_str, opt_handler, NULL)
> >  {
> >	int drm_fd;
> >	uint32_t devid;
> > +	struct stat sb;
> >	bool blocking_read = true;
> >
> >	igt_fixture {
> > @@ -642,6 +655,7 @@ igt_main_args("e:g:o:r:u:w:", long_options, help_str, opt_handler, NULL)
> >		devid = intel_get_drm_devid(drm_fd);
> >		igt_require(IS_PONTEVECCHIO(devid) || intel_graphics_ver(devid) >= IP_VER(20, 0));
> >		igt_require_f(igt_get_gpgpu_fillfunc(devid), "no gpgpu-fill function\n");
> > +		igt_require(!stat(OBSERVATION_PARANOID, &sb));
> >		if (output_file) {
> >			output = fopen(output_file, "w");
> >			igt_require(output);
> > @@ -650,12 +664,22 @@ igt_main_args("e:g:o:r:u:w:", long_options, help_str, opt_handler, NULL)
> >
> >	igt_describe("Verify non-blocking read of EU stall data during a workload run");
> >	igt_subtest("non-blocking-read") {
> > -		test_eustall(drm_fd, devid, !blocking_read);
> > +		test_eustall(drm_fd, devid, !blocking_read, 1);
> > +	}
> > +
> > +	igt_describe("Run non-blocking read test twice with disable and enable between the runs");
> > +	igt_subtest("non-blocking-read-twice") {
> > +		test_eustall(drm_fd, devid, !blocking_read, 2);
> >	}
> >
> >	igt_describe("Verify blocking read of EU stall data during a workload run");
> >	igt_subtest("blocking-read") {
> > -		test_eustall(drm_fd, devid, blocking_read);
> > +		test_eustall(drm_fd, devid, blocking_read, 1);
> > +	}
> > +
> > +	igt_describe("Run blocking read test twice with disable and enable between the runs");
> > +	igt_subtest("blocking-read-twice") {
> > +		test_eustall(drm_fd, devid, blocking_read, 2);
> >	}
> >
> >	igt_describe("Verify that unprivileged open of a EU stall data fd fails");
> > --
> > 2.48.1
> >


More information about the igt-dev mailing list