[PATCH i-g-t 3/3] tests/kms_hdr: Handle HDR panels requiring DSC
Sharma, Swati2
swati2.sharma at intel.com
Thu Aug 14 08:16:28 UTC 2025
Hi Chaitanya,
On 11-08-2025 01:28 pm, Chaitanya Kumar Borah wrote:
> Some panels needs DSC to support HDR (at least in higher modes).
> In cases like these the output bpc and crc comparison fails if
> the SDR/non-HDR mode does not require DSC. Therefore, force DSC
> when in SDR mode so that output bpc and crc can be compared.
>
> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah at intel.com>
> ---
> tests/kms_hdr.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 50 insertions(+), 2 deletions(-)
>
> diff --git a/tests/kms_hdr.c b/tests/kms_hdr.c
> index 76e103ac4..c1123531a 100644
> --- a/tests/kms_hdr.c
> +++ b/tests/kms_hdr.c
> @@ -97,6 +97,7 @@ enum {
> TEST_INVALID_METADATA_SIZES = 1 << 4,
> TEST_INVALID_HDR = 1 << 5,
> TEST_BRIGHTNESS = 1 << 6,
> + TEST_NEEDS_DSC = 1 << 7,
> };
>
> /* BPC connector state. */
> @@ -491,9 +492,20 @@ static void test_static_toggle(data_t *data, enum pipe pipe,
> igt_plane_set_size(data->primary, data->w, data->h);
> set_hdr_output_metadata(data, NULL);
> igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
> +
> + if (flags & TEST_NEEDS_DSC) {
> + igt_force_dsc_enable(data->fd, output->name);
Can you add debug prints in lib func() ?
> + igt_assert(igt_is_force_dsc_enabled(data->fd, output->name));
> + }
> +
> igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> igt_assert_output_bpc_equal(data->fd, pipe, output->name, 8);
>
> + if (flags & TEST_NEEDS_DSC) {
> + igt_force_dsc_disable(data->fd, output->name);
> + igt_assert(igt_is_force_dsc_disabled(data->fd, output->name));
> + }
> +
> /* Apply HDR metadata and 10bpc. We expect a modeset for entering. */
> set_hdr_output_metadata(data, &hdr);
> igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
> @@ -518,11 +530,22 @@ static void test_static_toggle(data_t *data, enum pipe pipe,
> /* Disable HDR metadata and drop back to 8bpc. We expect a modeset for exiting. */
> set_hdr_output_metadata(data, NULL);
> igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
> +
> + if (flags & TEST_NEEDS_DSC) {
> + igt_force_dsc_enable(data->fd, output->name);
> + igt_assert(igt_is_force_dsc_enabled(data->fd, output->name));
> + }
> +
> igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> igt_assert_output_bpc_equal(data->fd, pipe, output->name, 8);
>
> igt_assert_crc_equal(&ref_crc, &new_crc);
>
> + if (flags & TEST_NEEDS_DSC) {
> + igt_force_dsc_disable(data->fd, output->name);
> + igt_assert(igt_is_force_dsc_disabled(data->fd, output->name));
> + }
> +
> cleanup:
> test_fini(data);
> igt_remove_fb(data->fd, &afb);
> @@ -558,7 +581,7 @@ static void fill_hdr_output_metadata_sdr(struct hdr_output_metadata *meta)
> meta->hdmi_metadata_type1.max_cll = 0;
> }
>
> -static void test_static_swap(data_t *data, enum pipe pipe, igt_output_t *output)
> +static void test_static_swap(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
> {
> igt_display_t *display = &data->display;
> igt_crc_t ref_crc, new_crc;
> @@ -577,9 +600,20 @@ static void test_static_swap(data_t *data, enum pipe pipe, igt_output_t *output)
> igt_plane_set_fb(data->primary, &afb);
> igt_plane_set_size(data->primary, data->w, data->h);
> igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
> +
> + if (flags & TEST_NEEDS_DSC) {
> + igt_force_dsc_enable(data->fd, output->name);
> + igt_assert(igt_is_force_dsc_enabled(data->fd, output->name));
> + }
> +
> igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> igt_assert_output_bpc_equal(data->fd, pipe, output->name, 8);
>
> + if (flags & TEST_NEEDS_DSC) {
> + igt_force_dsc_disable(data->fd, output->name);
> + igt_assert(igt_is_force_dsc_disabled(data->fd, output->name));
> + }
> +
> /* Enter HDR, a modeset is allowed here. */
> fill_hdr_output_metadata_st2048(&hdr);
> set_hdr_output_metadata(data, &hdr);
> @@ -602,6 +636,10 @@ static void test_static_swap(data_t *data, enum pipe pipe, igt_output_t *output)
> else
> igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
>
> + if (flags & TEST_NEEDS_DSC) {
> + igt_force_dsc_enable(data->fd, output->name);
> + igt_assert(igt_is_force_dsc_enabled(data->fd, output->name));
> + }
> /* Enter SDR via metadata, no modeset allowed for
> * amd driver, whereas a modeset is required for
> * intel driver. */
> @@ -623,6 +661,11 @@ static void test_static_swap(data_t *data, enum pipe pipe, igt_output_t *output)
> /* Verify that the CRC didn't change while cycling metadata. */
> igt_assert_crc_equal(&ref_crc, &new_crc);
>
> + if (flags & TEST_NEEDS_DSC) {
> + igt_force_dsc_disable(data->fd, output->name);
> + igt_assert(igt_is_force_dsc_disabled(data->fd, output->name));
> + }
> +
> test_fini(data);
> igt_remove_fb(data->fd, &afb);
> }
> @@ -714,6 +757,11 @@ static void test_hdr(data_t *data, uint32_t flags)
> break;
> }
>
> + if (igt_is_dsc_enabled(data->fd, output->name))
> + flags |= TEST_NEEDS_DSC;
> + else
> + flags &= ~TEST_NEEDS_DSC;
> +
> set_hdr_output_metadata(data, NULL);
> igt_display_commit2(display, display->is_atomic ?
> COMMIT_ATOMIC : COMMIT_LEGACY);
> @@ -728,7 +776,7 @@ static void test_hdr(data_t *data, uint32_t flags)
> TEST_INVALID_HDR | TEST_BRIGHTNESS))
> test_static_toggle(data, pipe, output, flags);
> if (flags & TEST_SWAP)
> - test_static_swap(data, pipe, output);
> + test_static_swap(data, pipe, output, flags);
> if (flags & TEST_INVALID_METADATA_SIZES)
> test_invalid_metadata_sizes(data, output);
> }
More information about the igt-dev
mailing list