[PATCH i-g-t] tests/kms: Drop 'Functionality' and 'Test category' from documentation
Sharma, Swati2
swati2.sharma at intel.com
Fri Feb 14 07:34:55 UTC 2025
Hi Lucas,
On 11-02-2025 12:55 am, Lucas De Marchi wrote:
> On Mon, Feb 10, 2025 at 04:26:46PM +0530, Swati Sharma wrote:
>> 'Functionality' solely depends upon developer's interpretation and
>> 'Test category' is not used. Let's remove them from the kms tests
>> documentation so that documentation can be made precise which
>> is easy to maintain.
>
> but is this needed elsewhere?
No, this is not a mandatory field for KMS tests. No no change required
in json.
>
> Lucas De Marchi
>
>>
>> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
>> ---
>> tests/chamelium/kms_chamelium_audio.c | 5 -
>> tests/chamelium/kms_chamelium_color.c | 2 -
>> tests/chamelium/kms_chamelium_edid.c | 11 --
>> tests/chamelium/kms_chamelium_frames.c | 11 --
>> tests/chamelium/kms_chamelium_hpd.c | 26 -----
>> tests/fbdev.c | 2 -
>> tests/intel/i915_pipe_stress.c | 3 -
>> tests/intel/kms_big_fb.c | 11 --
>> tests/intel/kms_busy.c | 3 -
>> tests/intel/kms_ccs.c | 4 -
>> tests/intel/kms_cdclk.c | 2 -
>> tests/intel/kms_dirtyfb.c | 3 -
>> tests/intel/kms_dp_linktrain_fallback.c | 2 -
>> tests/intel/kms_draw_crc.c | 2 -
>> tests/intel/kms_dsc.c | 2 -
>> tests/intel/kms_fb_coherency.c | 2 -
>> tests/intel/kms_fbcon_fbt.c | 5 -
>> tests/intel/kms_fence_pin_leak.c | 2 -
>> tests/intel/kms_flip_scaled_crc.c | 12 --
>> tests/intel/kms_flip_tiling.c | 2 -
>> tests/intel/kms_frontbuffer_tracking.c | 147 ------------------------
>> tests/intel/kms_joiner.c | 2 -
>> tests/intel/kms_legacy_colorkey.c | 2 -
>> tests/intel/kms_mmap_write_crc.c | 2 -
>> tests/intel/kms_pipe_b_c_ivb.c | 2 -
>> tests/intel/kms_pm_backlight.c | 5 -
>> tests/intel/kms_pm_dc.c | 8 --
>> tests/intel/kms_pm_lpsp.c | 2 -
>> tests/intel/kms_pm_rpm.c | 15 ---
>> tests/intel/kms_psr.c | 33 ------
>> tests/intel/kms_psr2_sf.c | 25 ----
>> tests/intel/kms_psr_stress_test.c | 2 -
>> tests/intel/kms_pwrite_crc.c | 2 -
>> tests/kms_3d.c | 2 -
>> tests/kms_addfb_basic.c | 17 ---
>> tests/kms_async_flips.c | 4 -
>> tests/kms_atomic.c | 4 -
>> tests/kms_atomic_interruptible.c | 6 -
>> tests/kms_atomic_transition.c | 4 -
>> tests/kms_bw.c | 2 -
>> tests/kms_color.c | 2 -
>> tests/kms_concurrent.c | 2 -
>> tests/kms_content_protection.c | 7 --
>> tests/kms_cursor_crc.c | 5 -
>> tests/kms_cursor_edge_walk.c | 2 -
>> tests/kms_cursor_legacy.c | 2 -
>> tests/kms_display_modes.c | 3 -
>> tests/kms_dither.c | 2 -
>> tests/kms_dp_aux_dev.c | 2 -
>> tests/kms_feature_discovery.c | 7 --
>> tests/kms_flip.c | 14 ---
>> tests/kms_flip_event_leak.c | 2 -
>> tests/kms_force_connector_basic.c | 3 -
>> tests/kms_getfb.c | 4 -
>> tests/kms_hdmi_inject.c | 3 -
>> tests/kms_hdr.c | 10 --
>> tests/kms_invalid_mode.c | 2 -
>> tests/kms_lease.c | 2 -
>> tests/kms_multipipe_modeset.c | 2 -
>> tests/kms_panel_fitting.c | 2 -
>> tests/kms_pipe_crc_basic.c | 5 -
>> tests/kms_plane.c | 7 --
>> tests/kms_plane_alpha_blend.c | 2 -
>> tests/kms_plane_cursor.c | 2 -
>> tests/kms_plane_lowres.c | 3 -
>> tests/kms_plane_multiple.c | 3 -
>> tests/kms_plane_scaling.c | 6 -
>> tests/kms_prop_blob.c | 2 -
>> tests/kms_properties.c | 2 -
>> tests/kms_rotation_crc.c | 5 -
>> tests/kms_scaling_modes.c | 2 -
>> tests/kms_selftest.c | 2 -
>> tests/kms_sequence.c | 2 -
>> tests/kms_setmode.c | 3 -
>> tests/kms_sysfs_edid_timing.c | 2 -
>> tests/kms_tiled_display.c | 3 -
>> tests/kms_tv_load_detect.c | 2 -
>> tests/kms_vblank.c | 10 --
>> tests/kms_vrr.c | 9 --
>> tests/kms_writeback.c | 2 -
>> tests/testdisplay.c | 2 -
>> 81 files changed, 552 deletions(-)
>>
>> diff --git a/tests/chamelium/kms_chamelium_audio.c
>> b/tests/chamelium/kms_chamelium_audio.c
>> index 74e50db3b..4feae6a93 100644
>> --- a/tests/chamelium/kms_chamelium_audio.c
>> +++ b/tests/chamelium/kms_chamelium_audio.c
>> @@ -30,7 +30,6 @@
>> * Description: Testing Audio with a Chamelium board
>> * Driver requirement: i915, xe
>> * Mega feature: Display Audio
>> - * Test category: functionality test
>> */
>>
>> #include "igt_eld.h"
>> @@ -41,22 +40,18 @@
>> * SUBTEST: dp-audio
>> * Description: Playback various audio signals with various audio
>> formats/rates,
>> * capture them and check they are correct
>> - * Functionality: chamelium, dp, audio
>> *
>> * SUBTEST: hdmi-audio
>> * Description: Playback various audio signals with various audio
>> formats/rates,
>> * capture them and check they are correct
>> - * Functionality: chamelium, hdmi, audio
>> *
>> * SUBTEST: dp-audio-edid
>> * Description: Plug a connector with an EDID suitable for audio,
>> check ALSA's
>> * EDID-Like Data reports the correct audio parameters
>> - * Functionality: chamelium, dp, audio
>> *
>> * SUBTEST: hdmi-audio-edid
>> * Description: Plug a connector with an EDID suitable for audio,
>> check ALSA's
>> * EDID-Like Data reports the correct audio parameters
>> - * Functionality: chamelium, hdmi, audio
>> */
>>
>> /* Playback parameters control the audio signal we synthesize and
>> send */
>> diff --git a/tests/chamelium/kms_chamelium_color.c
>> b/tests/chamelium/kms_chamelium_color.c
>> index 5550cec22..68611ec6a 100644
>> --- a/tests/chamelium/kms_chamelium_color.c
>> +++ b/tests/chamelium/kms_chamelium_color.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test Color Features at Pipe level using Chamelium to
>> verify instead of CRC
>> * Driver requirement: i915, xe
>> - * Functionality: chamelium, colorspace
>> * Mega feature: Color Management
>> - * Test category: functionality test
>> */
>>
>> #include "kms_color_helper.h"
>> diff --git a/tests/chamelium/kms_chamelium_edid.c
>> b/tests/chamelium/kms_chamelium_edid.c
>> index d2d85cad5..9a7915566 100644
>> --- a/tests/chamelium/kms_chamelium_edid.c
>> +++ b/tests/chamelium/kms_chamelium_edid.c
>> @@ -30,7 +30,6 @@
>> * Description: Testing EDID with a Chamelium board
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <fcntl.h>
>> @@ -55,33 +54,27 @@
>> /**
>> * SUBTEST: dp-edid-read
>> * Description: Make sure the EDID exposed by KMS is the same as the
>> screen's
>> - * Functionality: chamelium, dp, edid
>> *
>> * SUBTEST: hdmi-edid-read
>> * Description: Make sure the EDID exposed by KMS is the same as the
>> screen's
>> - * Functionality: chamelium, hdmi, edid
>> *
>> * SUBTEST: vga-edid-read
>> * Description: Make sure the EDID exposed by KMS is the same as the
>> screen's
>> - * Functionality: chamelium, vga, edid
>> *
>> * SUBTEST: dp-edid-resolution-list
>> * Description: Get an EDID with many modes of different
>> configurations, set
>> * them on the screen and check the screen resolution
>> matches the
>> * mode resolution.
>> - * Functionality: chamelium, dp, edid
>> *
>> * SUBTEST: dp-mode-timings
>> * Description: For each mode of the IGT base EDID, perform a modeset
>> and check
>> * the mode detected by the Chamelium receiver matches
>> the mode we
>> * set
>> - * Functionality: chamelium, dp, edid
>> *
>> * SUBTEST: hdmi-mode-timings
>> * Description: For each mode of the IGT base EDID, perform a modeset
>> and check
>> * the mode detected by the Chamelium receiver matches
>> the mode we
>> * set
>> - * Functionality: chamelium, dp, edid
>> */
>>
>> /**
>> @@ -89,13 +82,11 @@
>> * Description: Stress test the DUT by testing multiple EDIDs, one
>> right after
>> * the other, and ensure their validity by check the
>> real screen
>> * resolution vs the advertised mode (%arg[1]) resolution.
>> - * Functionality: chamelium, dp, edid
>> *
>> * SUBTEST: hdmi-edid-stress-resolution-%s
>> * Description: Stress test the DUT by testing multiple EDIDs, one
>> right after
>> * the other, and ensure their validity by check the
>> real screen
>> * resolution vs the advertised mode (%arg[1]) resolution.
>> - * Functionality: chamelium, hdmi, edid
>> *
>> * arg[1]:
>> *
>> @@ -108,13 +99,11 @@
>> * Description: Simulate a screen being unplugged and another screen
>> being
>> * plugged during suspend, check that a uevent is sent and
>> * connector status is updated during %arg[1]
>> - * Functionality: chamelium, dp, edid
>> *
>> * SUBTEST: hdmi-edid-change-during-%s
>> * Description: Simulate a screen being unplugged and another screen
>> being
>> * plugged during suspend, check that a uevent is sent and
>> * connector status is updated during %arg[1]
>> - * Functionality: chamelium, dp, edid
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/chamelium/kms_chamelium_frames.c
>> b/tests/chamelium/kms_chamelium_frames.c
>> index a585e7e01..b9a8eb46d 100644
>> --- a/tests/chamelium/kms_chamelium_frames.c
>> +++ b/tests/chamelium/kms_chamelium_frames.c
>> @@ -30,7 +30,6 @@
>> * Description: Tests requiring a Chamelium board
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt_eld.h"
>> @@ -41,17 +40,14 @@
>> * SUBTEST: dp-crc-fast
>> * Description: Pick the first mode of the IGT base EDID, display and
>> capture
>> * a few frames, then check captured frames are correct
>> - * Functionality: chamelium, dp, frame_integrity
>> *
>> * SUBTEST: hdmi-crc-fast
>> * Description: Pick the first mode of the IGT base EDID, display and
>> capture
>> * a few frames, then check captured frames are correct
>> - * Functionality: chamelium, hdmi, frame_integrity
>> *
>> * SUBTEST: hdmi-%s-formats
>> * Description: Pick the first mode of the IGT base EDID, display and
>> capture a
>> * few frames, then check captured frames are correct
>> - * Functionality: chamelium, hdmi, frame_integrity
>> *
>> * arg[1]:
>> *
>> @@ -63,17 +59,14 @@
>> * SUBTEST: vga-frame-dump
>> * Description: For each mode of the IGT base EDID, display and
>> capture a few
>> * frames, then check captured frames are correct
>> - * Functionality: chamelium, vga, frame_integrity
>> *
>> * SUBTEST: dp-crc-%s
>> * Description: For each mode of the IGT base EDID, display and
>> capture a %arg[1]
>> * frame(s), then check captured frame(s) are correct
>> - * Functionality: chamelium, dp, frame_integrity
>> *
>> * SUBTEST: hdmi-crc-%s
>> * Description: For each mode of the IGT base EDID, display and
>> capture a %arg[1]
>> * frame(s), then check captured frame(s) are correct
>> - * Functionality: chamelium, hdmi, frame_integrity
>> *
>> * arg[1]:
>> *
>> @@ -86,23 +79,19 @@
>> * Description: For each mode of the IGT base EDID, display and
>> capture a few
>> * frames, then download the captured frames and compare
>> them
>> * bit-by-bit to the sent ones
>> - * Functionality: chamelium, dp, frame_integrity
>> *
>> * SUBTEST: hdmi-frame-dump
>> * Description: For each mode of the IGT base EDID, display and
>> capture a few
>> * frames, then download the captured frames and compare
>> them
>> * bit-by-bit to the sent ones
>> - * Functionality: chamelium, hdmi, frame_integrity
>> *
>> * SUBTEST: hdmi-aspect-ratio
>> * Description: Pick a mode with a picture aspect-ratio, capture AVI
>> InfoFrames
>> * and check they include the relevant fields
>> - * Functionality: chamelium, hdmi, frame_integrity
>> *
>> * SUBTEST: hdmi-%s-planes-random
>> * Description: Setup a few overlay planes with random parameters,
>> capture the
>> * frame and check it matches the expected output
>> - * Functionality: chamelium, hdmi, frame_integrity
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/chamelium/kms_chamelium_hpd.c
>> b/tests/chamelium/kms_chamelium_hpd.c
>> index 76a691043..161f494e9 100644
>> --- a/tests/chamelium/kms_chamelium_hpd.c
>> +++ b/tests/chamelium/kms_chamelium_hpd.c
>> @@ -30,7 +30,6 @@
>> * Description: Testing HPD with a Chamelium board
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "kms_chamelium_helper.h"
>> @@ -39,47 +38,38 @@
>> * SUBTEST: dp-hpd-fast
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, dp
>> *
>> * SUBTEST: hdmi-hpd-fast
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, hdmi
>> *
>> * SUBTEST: vga-hpd-fast
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, vga
>> *
>> * SUBTEST: dp-hpd
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, dp
>> *
>> * SUBTEST: hdmi-hpd
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, hdmi
>> *
>> * SUBTEST: vga-hpd
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, vga
>> *
>> * SUBTEST: dp-hpd-%s
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, dp
>> *
>> * SUBTEST: hdmi-hpd-%s
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, hdmi
>> *
>> * SUBTEST: vga-hpd-%s
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug
>> - * Functionality: chamelium, hotplug, vga
>> *
>> * arg[1]:
>> *
>> @@ -91,84 +81,68 @@
>> * SUBTEST: dp-hpd-for-each-pipe
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug for each pipe with valid output
>> - * Functionality: chamelium, hotplug, dp
>> *
>> * SUBTEST: hdmi-hpd-for-each-pipe
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug for each pipe with valid output
>> - * Functionality: chamelium, hotplug, hdmi
>> *
>> * SUBTEST: vga-hpd-for-each-pipe
>> * Description: Check that we get uevents and updated connector
>> status on
>> * hotplug and unplug for each pipe with valid output
>> - * Functionality: chamelium, hotplug, vga
>> *
>> * SUBTEST: dp-hpd-after-hibernate
>> * Description: Toggle HPD during Hibernation, check that uevents are
>> sent and
>> * connector status is updated
>> - * Functionality: chamelium, hotplug, dp, hibernation
>> *
>> * SUBTEST: hdmi-hpd-after-hibernate
>> * Description: Toggle HPD during Hibernation, check that uevents are
>> sent and
>> * connector status is updated
>> - * Functionality: chamelium, hotplug, hdmi, hibernation
>> *
>> * SUBTEST: vga-hpd-after-hibernate
>> * Description: Toggle HPD during Hibernation, check that uevents are
>> sent and
>> * connector status is updated
>> - * Functionality: chamelium, hotplug, vga, hibernation
>> *
>> * SUBTEST: dp-hpd-after-suspend
>> * Description: Toggle HPD during Suspend, check that uevents are
>> sent and
>> * connector status is updated
>> - * Functionality: chamelium, hotplug, dp, suspend
>> *
>> * SUBTEST: hdmi-hpd-after-suspend
>> * Description: Toggle HPD during Suspend, check that uevents are
>> sent and
>> * connector status is updated
>> - * Functionality: chamelium, hotplug, hdmi, suspend
>> *
>> * SUBTEST: vga-hpd-after-suspend
>> * Description: Toggle HPD during Suspend, check that uevents are
>> sent and
>> * connector status is updated
>> - * Functionality: chamelium, hotplug, vga, suspend
>> *
>> * SUBTEST: common-hpd-after-suspend
>> * Description: Toggle HPD during suspend on all connectors, check
>> that uevents
>> * are sent and connector status is updated
>> - * Functionality: chamelium, hotplug, suspend
>> *
>> * SUBTEST: common-hpd-after-hibernate
>> * Description: Toggle HPD during suspend on all connectors, check
>> that uevents
>> * are sent and connector status is updated
>> - * Functionality: chamelium, hotplug, hibernation
>> *
>> * SUBTEST: vga-hpd-without-ddc
>> * Description: Disable DDC on a VGA connector, check we still get a
>> uevent on
>> * hotplug
>> - * Functionality: chamelium, hotplug, vga
>> *
>> * SUBTEST: dp-hpd-storm
>> * Description: Trigger a series of hotplugs in a very small
>> timeframe to
>> * simulate abad cable, check the kernel falls back to
>> polling
>> * to avoid a hotplug storm
>> - * Functionality: chamelium, hotplug, dp
>> *
>> * SUBTEST: hdmi-hpd-storm
>> * Description: Trigger a series of hotplugs in a very small
>> timeframe to
>> * simulate abad cable, check the kernel falls back to
>> polling
>> * to avoid a hotplug storm
>> - * Functionality: chamelium, hotplug, hdmi
>> *
>> * SUBTEST: dp-hpd-storm-disable
>> * Description: Disable HPD storm detection, trigger a storm and
>> check the
>> * kernel doesn't detect one
>> - * Functionality: chamelium, hotplug, dp
>> *
>> * SUBTEST: hdmi-hpd-storm-disable
>> * Description: Disable HPD storm detection, trigger a storm and
>> check the
>> * kernel doesn't detect one
>> - * Functionality: chamelium, hotplug, hdmi
>> */
>>
>> #define HPD_STORM_PULSE_INTERVAL_DP 100 /* ms */
>> diff --git a/tests/fbdev.c b/tests/fbdev.c
>> index f329e6ac6..fca688407 100644
>> --- a/tests/fbdev.c
>> +++ b/tests/fbdev.c
>> @@ -26,9 +26,7 @@
>> * Category: Display
>> * Description: Sanity test for framebuffer device.
>> * Driver requirement: i915, xe
>> - * Functionality: fbdev
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>> #include "config.h"
>>
>> diff --git a/tests/intel/i915_pipe_stress.c
>> b/tests/intel/i915_pipe_stress.c
>> index 203eb46a3..8f769cd63 100644
>> --- a/tests/intel/i915_pipe_stress.c
>> +++ b/tests/intel/i915_pipe_stress.c
>> @@ -25,9 +25,6 @@
>> * possible bandwidth/watermark and similar problems.
>> * Category: Display
>> * Mega feature: General Display Features
>> - * Sub-category: Display Tests
>> - * Functionality: kms_core
>> - * Test category: stress test
>> *
>> * SUBTEST: stress-xrgb8888-untiled
>> * Description:
>> diff --git a/tests/intel/kms_big_fb.c b/tests/intel/kms_big_fb.c
>> index 67ab85852..d600c63a1 100644
>> --- a/tests/intel/kms_big_fb.c
>> +++ b/tests/intel/kms_big_fb.c
>> @@ -27,7 +27,6 @@
>> * Description: Test big framebuffers
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -46,7 +45,6 @@
>> * SUBTEST: linear-%dbpp-rotate-%d
>> * Description: Sanity check if addfb ioctl works correctly for given
>> combination
>> * of Linear modifier with %arg[1]-bpp & %arg[2]-rotation
>> - * Functionality: big_fbs, kms_gem_interop, rotation
>> *
>> * arg[1].values: 8, 16, 32, 64
>> * arg[2].values: 0, 90, 180, 270
>> @@ -56,7 +54,6 @@
>> * SUBTEST: %s-%dbpp-rotate-%d
>> * Description: Sanity check if addfb ioctl works correctly for given
>> combination
>> * of %arg[1] with %arg[2]-bpp & %arg[3]-rotation
>> - * Functionality: big_fbs, kms_gem_interop, rotation, tiling
>> *
>> * arg[1]:
>> *
>> @@ -74,7 +71,6 @@
>> * Description: Test maximum hardware supported stride length for
>> given combination
>> * of linear modifier with max hardware stride length,
>> %arg[1]-bpp,
>> * and %arg[2]-rotation
>> - * Functionality: big_fbs, kms_gem_interop, rotation
>> *
>> * arg[1].values: 32, 64
>> * arg[2].values: 0, 180
>> @@ -85,7 +81,6 @@
>> * Description: Test maximum hardware supported stride length for
>> given combination
>> * of %arg[1] modifier with max hardware stride length,
>> %arg[2]-bpp,
>> * and %arg[3]-rotation
>> - * Functionality: big_fbs, kms_gem_interop, rotation, tiling
>> *
>> * arg[1]:
>> *
>> @@ -103,13 +98,11 @@
>> * Description: Test maximum hardware supported stride length for
>> given combination
>> * of %arg[1] modifier with max hardware stride length,
>> %arg[2]-bpp,
>> * and %arg[3]-rotation with H-flip mode
>> - * Functionality: big_fbs, kms_gem_interop, rotation, tiling
>> *
>> * SUBTEST: %s-max-hw-stride-%dbpp-rotate-%d-%s
>> * Description: Test maximum hardware supported stride length for
>> given combination
>> * of %arg[1] modifier with max hardware stride length,
>> %arg[2]-bpp,
>> * and %arg[3]-rotation with %arg[4] mode
>> - * Functionality: async_flips, big_fbs, kms_gem_interop, rotation,
>> tiling
>> *
>> * arg[1]:
>> *
>> @@ -131,22 +124,18 @@
>> * SUBTEST: linear-addfb
>> * Description: Sanity check if addfb ioctl works correctly with
>> Linear modifier
>> * for given size and strides of fb
>> - * Functionality: big_fbs, kms_gem_interop
>> *
>> * SUBTEST: %s-addfb
>> * Description: Sanity check if addfb ioctl works correctly with
>> %arg[1] modifier
>> * for given size and strides of fb
>> - * Functionality: big_fbs, kms_gem_interop, tiling
>> *
>> * SUBTEST: %s-addfb-size-overflow
>> * Description: Sanity check if addfb ioctl fails correctly for
>> (%arg[1]) modifier
>> * with small bo.
>> - * Functionality: big_fbs, kms_gem_interop, tiling
>> *
>> * SUBTEST: %s-addfb-size-offset-overflow
>> * Description: Sanity check if addfb ioctl fails correctly for
>> (%arg[1]) modifier
>> * and offsets with small bo
>> - * Functionality: big_fbs, kms_gem_interop, tiling
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/intel/kms_busy.c b/tests/intel/kms_busy.c
>> index 5917b888f..3f65ecb01 100644
>> --- a/tests/intel/kms_busy.c
>> +++ b/tests/intel/kms_busy.c
>> @@ -26,9 +26,7 @@
>> * Category: Display
>> * Description: Basic check of KMS ABI with busy framebuffers.
>> * Driver requirement: i915
>> - * Functionality: kms_core, hang
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <poll.h>
>> @@ -41,7 +39,6 @@
>> /**
>> * SUBTEST: basic
>> * Description: Test for basic check of KMS ABI with busy framebuffers.
>> - * Functionality: kms_core
>> *
>> * SUBTEST: basic-hang
>> * Description: Test for basic check of KMS ABI with busy framebuffers.
>> diff --git a/tests/intel/kms_ccs.c b/tests/intel/kms_ccs.c
>> index ad0ffe589..cb0c80f03 100644
>> --- a/tests/intel/kms_ccs.c
>> +++ b/tests/intel/kms_ccs.c
>> @@ -29,9 +29,7 @@
>> * complemented by a color control surface (CCS) that
>> the display
>> * uses to interpret the compressed data.
>> * Driver requirement: i915, xe
>> - * Functionality: ccs, tiling
>> * Mega feature: E2E Compression
>> - * Test category: functionality test
>> */
>> #include <fcntl.h>
>>
>> @@ -121,8 +119,6 @@
>> /**
>> * SUBTEST: %s-%s
>> * Description: Test %arg[1] with %arg[2] modifier
>> - * Functionality: ccs, rotation, tiling
>> - *
>> * arg[1]:
>> *
>> * @bad-rotation-90: 90 degree rotation
>> diff --git a/tests/intel/kms_cdclk.c b/tests/intel/kms_cdclk.c
>> index 382b3e9d1..5cff5826f 100644
>> --- a/tests/intel/kms_cdclk.c
>> +++ b/tests/intel/kms_cdclk.c
>> @@ -29,9 +29,7 @@
>> * Category: Display
>> * Description: Test cdclk features : crawling and squashing
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/intel/kms_dirtyfb.c b/tests/intel/kms_dirtyfb.c
>> index f2bdd4546..4dc48e8a1 100644
>> --- a/tests/intel/kms_dirtyfb.c
>> +++ b/tests/intel/kms_dirtyfb.c
>> @@ -8,9 +8,7 @@
>> * Category: Display
>> * Description: Test DIRTYFB ioctl functionality.
>> * Driver requirement: i915, xe
>> - * Functionality: dirtyfb
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <sys/types.h>
>> @@ -34,7 +32,6 @@
>> * SUBTEST: %s-dirtyfb-ioctl
>> * Description: Test DIRTYFB ioctl is working properly using GPU
>> * frontbuffer rendering with %arg[1] feature.
>> - * Functionality: dirtyfb, %arg[1]
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/intel/kms_dp_linktrain_fallback.c
>> b/tests/intel/kms_dp_linktrain_fallback.c
>> index 415005774..692915c88 100644
>> --- a/tests/intel/kms_dp_linktrain_fallback.c
>> +++ b/tests/intel/kms_dp_linktrain_fallback.c
>> @@ -8,9 +8,7 @@
>> * Category: Display
>> * Description: Test link training fallback for eDP/DP connectors
>> * Driver requirement: i915, xe
>> - * Functionality: link training
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <sys/types.h>
>> diff --git a/tests/intel/kms_draw_crc.c b/tests/intel/kms_draw_crc.c
>> index 30a09389e..d5709bcd6 100644
>> --- a/tests/intel/kms_draw_crc.c
>> +++ b/tests/intel/kms_draw_crc.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Tests whether the igt_draw library actually works.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core, tiling
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "i915/gem.h"
>> diff --git a/tests/intel/kms_dsc.c b/tests/intel/kms_dsc.c
>> index 5508e7a9e..f742674cf 100644
>> --- a/tests/intel/kms_dsc.c
>> +++ b/tests/intel/kms_dsc.c
>> @@ -35,9 +35,7 @@
>> * Category: Display
>> * Description: Test to validate display stream compression
>> * Driver requirement: i915, xe
>> - * Functionality: dsc
>> * Mega feature: VDSC
>> - * Test category: functionality test
>> */
>>
>> #include "kms_dsc_helper.h"
>> diff --git a/tests/intel/kms_fb_coherency.c
>> b/tests/intel/kms_fb_coherency.c
>> index c05bd0508..c5338568d 100644
>> --- a/tests/intel/kms_fb_coherency.c
>> +++ b/tests/intel/kms_fb_coherency.c
>> @@ -24,9 +24,7 @@
>> * of memset operations on future scanout buffer objects
>> * mmapped with different mmap methods and different caching
>> modes.
>> * Mega feature: General Display Features
>> - * Functionality: kms_core
>> * Driver requirement: i915, xe
>> - * Test category: functionality test
>> */
>>
>> typedef struct {
>> diff --git a/tests/intel/kms_fbcon_fbt.c b/tests/intel/kms_fbcon_fbt.c
>> index 9c3ff7a21..160f475f2 100644
>> --- a/tests/intel/kms_fbcon_fbt.c
>> +++ b/tests/intel/kms_fbcon_fbt.c
>> @@ -30,7 +30,6 @@
>> * Description: Test the relationship between fbcon and the
>> frontbuffer tracking
>> * infrastructure.
>> * Driver requirement: i915, xe
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -45,25 +44,21 @@
>> * SUBTEST: fbc
>> * Description: Test the relationship between fbcon and the
>> frontbuffer tracking
>> * infrastructure with fbc enabled.
>> - * Functionality: fbc, fbcon, fbt
>> * Mega feature: General Display Features
>> *
>> * SUBTEST: fbc-suspend
>> * Description: Suspend test to validate the relationship between
>> fbcon and the
>> * frontbuffer tracking infrastructure with fbc enabled.
>> - * Functionality: fbc, fbcon, fbt, suspend
>> * Mega feature: General Display Features
>> *
>> * SUBTEST: psr
>> * Description: Test the relationship between fbcon and the
>> frontbuffer tracking
>> * infrastructure with psr enabled.
>> - * Functionality: fbcon, fbt, psr1
>> * Mega feature: PSR
>> *
>> * SUBTEST: psr-suspend
>> * Description: Suspend test to validate the relationship between
>> fbcon and the
>> * frontbuffer tracking infrastructure with psr enabled.
>> - * Functionality: fbcon, fbt, psr1, suspend
>> * Mega feature: PSR
>> */
>>
>> diff --git a/tests/intel/kms_fence_pin_leak.c
>> b/tests/intel/kms_fence_pin_leak.c
>> index 8ccd73a93..ed064aba0 100644
>> --- a/tests/intel/kms_fence_pin_leak.c
>> +++ b/tests/intel/kms_fence_pin_leak.c
>> @@ -41,9 +41,7 @@
>> * SUBTEST:
>> * Description: Along with the modeset, validate fence pin_count
>> leakage.
>> * Driver requirement: i915
>> - * Functionality: kms_core, fences
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION("Exercises full ppgtt fence pin_count leak in the "
>> diff --git a/tests/intel/kms_flip_scaled_crc.c
>> b/tests/intel/kms_flip_scaled_crc.c
>> index 7dc07bc83..e866c62fc 100644
>> --- a/tests/intel/kms_flip_scaled_crc.c
>> +++ b/tests/intel/kms_flip_scaled_crc.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test flipping between scaled/nonscaled framebuffers
>> * Driver requirement: i915, xe
>> - * Functionality: ccs, scaling, tiling, vblank
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -46,7 +44,6 @@
>> * SUBTEST: flip-32bpp-linear-to-64bpp-linear-%s
>> * Description: Flip from 32bpp non scaled fb to 64bpp %arg[1] fb to
>> stress CD
>> * clock programming
>> - * Functionality: scaling, vblank
>> *
>> * SUBTEST: flip-32bpp-4tile-to-32bpp-4tiledg2rcccs-%s
>> * Description: Flip from 32bpp non scaled fb to 32bpp %arg[1] fb to
>> stress CD
>> @@ -55,12 +52,10 @@
>> * SUBTEST: flip-32bpp-4tile-to-64bpp-4tile-%s
>> * Description: Flip from 32bpp non scaled fb to 64bpp %arg[1] fb to
>> stress CD
>> * clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * SUBTEST: flip-32bpp-xtile-to-64bpp-xtile-%s
>> * Description: Flip from 32bpp non scaled fb to 64bpp %arg[1] fb to
>> stress CD
>> * clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * SUBTEST: flip-32bpp-yftile-to-32bpp-yftileccs-%s
>> * Description: Flip from 32bpp non scaled fb to 32bpp %arg[1] fb to
>> stress CD
>> @@ -69,7 +64,6 @@
>> * SUBTEST: flip-32bpp-yftile-to-64bpp-yftile-%s
>> * Description: Flip from 32bpp non scaled fb to 64bpp %arg[1] fb to
>> stress CD
>> * clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * SUBTEST: flip-32bpp-yftileccs-to-64bpp-yftile-%s
>> * Description: Flip from 32bpp non scaled fb to 64bpp %arg[1] fb to
>> stress CD
>> @@ -86,7 +80,6 @@
>> * SUBTEST: flip-32bpp-ytile-to-64bpp-ytile-%s
>> * Description: Flip from 32bpp non scaled fb to 64bpp %arg[1] fb to
>> stress CD
>> * clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * SUBTEST: flip-32bpp-ytileccs-to-64bpp-ytile-%s
>> * Description: Flip from 32bpp non scaled fb to 64bpp %arg[1] fb to
>> stress CD
>> @@ -106,27 +99,22 @@
>> * SUBTEST: flip-64bpp-4tile-to-%dbpp-4tile-%s
>> * Description: Flip from 64bpp non scaled fb to %arg[1]bpp %arg[2]
>> fb to stress
>> * CD clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * SUBTEST: flip-64bpp-xtile-to-%dbpp-xtile-%s
>> * Description: Flip from 64bpp non scaled fb to %arg[1]bpp %arg[2]
>> fb to stress
>> * CD clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * SUBTEST: flip-64bpp-yftile-to-%dbpp-yftile-%s
>> * Description: Flip from 64bpp non scaled fb to %arg[1]bpp %arg[2]
>> fb to stress
>> * CD clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * SUBTEST: flip-64bpp-ytile-to-%dbpp-ytile-%s
>> * Description: Flip from 64bpp non scaled fb to %arg[1]bpp %arg[2]
>> fb to stress
>> * CD clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * SUBTEST: flip-64bpp-linear-to-%dbpp-linear-%s
>> * Description: Flip from 64bpp non scaled fb to %arg[1]bpp %arg[2]
>> fb to stress
>> * CD clock programming
>> - * Functionality: scaling, tiling, vblank
>> *
>> * arg[1].values: 16, 32
>> * arg[2]:
>> diff --git a/tests/intel/kms_flip_tiling.c
>> b/tests/intel/kms_flip_tiling.c
>> index e937c2171..3880534a7 100644
>> --- a/tests/intel/kms_flip_tiling.c
>> +++ b/tests/intel/kms_flip_tiling.c
>> @@ -41,9 +41,7 @@
>> * SUBTEST: flip-change-tiling
>> * Description: Check pageflip between modifiers
>> * Driver requirement: i915, xe
>> - * Functionality: kms_gem_interop, tiling
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION("Test page flips and tiling scenarios");
>> diff --git a/tests/intel/kms_frontbuffer_tracking.c
>> b/tests/intel/kms_frontbuffer_tracking.c
>> index b93c0d45a..0809352cb 100644
>> --- a/tests/intel/kms_frontbuffer_tracking.c
>> +++ b/tests/intel/kms_frontbuffer_tracking.c
>> @@ -30,7 +30,6 @@
>> * Description: Test the Kernel's frontbuffer tracking mechanism and
>> its related features: FBC, PSR and DRRS
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <sys/types.h>
>> @@ -51,35 +50,27 @@
>> /**
>> * SUBTEST: basic
>> * Description: Do some basic operations regardless of which features
>> are enabled
>> - * Functionality: fbt
>> *
>> * SUBTEST: plane-fbc-rte
>> * Description: Sanity test to enable FBC on a plane.
>> - * Functionality: fbc
>> *
>> * SUBTEST: pipe-fbc-rte
>> * Description: Sanity test to enable FBC on each pipe.
>> - * Functionality: fbc
>> *
>> * SUBTEST: drrs-%dp-rte
>> * Description: Sanity test to enable DRRS with %arg[1] panels.
>> - * Functionality: fbt, drrs
>> *
>> * SUBTEST: fbc-%dp-rte
>> * Description: Sanity test to enable FBC with %arg[1] panels.
>> - * Functionality: fbc, fbt
>> *
>> * SUBTEST: psr-%dp-rte
>> * Description: Sanity test to enable PSR with %arg[1] panels.
>> - * Functionality: fbt, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-rte
>> * Description: Sanity test to enable FBC & DRRS with %arg[1] panels.
>> - * Functionality: drrs, fbc, fbt
>> *
>> * SUBTEST: fbcpsr-%dp-rte
>> * Description: Sanity test to enable FBC & PSR with %arg[1] panels.
>> - * Functionality: fbc, fbt, psr1
>> *
>> * arg[1].values: 1, 2
>> */
>> @@ -87,23 +78,18 @@
>> /**
>> * SUBTEST: drrs-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -121,27 +107,22 @@
>> * SUBTEST: drrs-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-1p-offscren-pri-%s-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -159,27 +140,22 @@
>> * SUBTEST: drrs-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1].values: 1, 2
>> *
>> @@ -199,23 +175,18 @@
>> /**
>> * SUBTEST: drrs-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1].values: 1, 2
>> *
>> @@ -235,23 +206,18 @@
>> /**
>> * SUBTEST: drrs-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1].values: 1, 2
>> *
>> @@ -266,27 +232,22 @@
>> * SUBTEST: drrs-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%dp-primscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1].values: 1, 2
>> *
>> @@ -300,23 +261,18 @@
>> /**
>> * SUBTEST: drrs-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -335,27 +291,22 @@
>> * SUBTEST: drrs-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -373,23 +324,18 @@
>> /**
>> * SUBTEST: drrs-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -402,27 +348,22 @@
>> * SUBTEST: drrs-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-2p-scndscrn-pri-shrfb-draw-%s
>> * Description: Draw a set of rectangles on the screen using the
>> provided method
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -434,23 +375,18 @@
>> /**
>> * SUBTEST: drrs-%dp-pri-indfb-multidraw
>> * Description: Draw a set of rectangles on the screen using
>> alternated drawing methods
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-%dp-pri-indfb-multidraw
>> * Description: Draw a set of rectangles on the screen using
>> alternated drawing methods
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-%dp-pri-indfb-multidraw
>> * Description: Draw a set of rectangles on the screen using
>> alternated drawing methods
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-pri-indfb-multidraw
>> * Description: Draw a set of rectangles on the screen using
>> alternated drawing methods
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%dp-pri-indfb-multidraw
>> * Description: Draw a set of rectangles on the screen using
>> alternated drawing methods
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1].values: 1, 2
>> */
>> @@ -458,23 +394,18 @@
>> /**
>> * SUBTEST: drrs-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -492,27 +423,22 @@
>> * SUBTEST: drrs-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> * Driver requirement: i915
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> * Driver requirement: i915
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> * Driver requirement: i915
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%s-draw-%s
>> * Description: Test pixel formats (%arg[1]) that are not FORMAT_DEFAULT
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -529,41 +455,32 @@
>> /**
>> * SUBTEST: drrs-slowdraw
>> * Description: Sleep a little bit between drawing operations with DRRS
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: psr-slowdraw
>> * Description: Sleep a little bit between drawing operations with PSR
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-slowdraw
>> * Description: Sleep a little bit between drawing operations with
>> FBC & DRRS
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-slowdraw
>> * Description: Sleep a little bit between drawing operations with
>> FBC & PSR
>> - * Functionality: fbc, fbt, kms_core, psr1
>> */
>>
>> /**
>> * SUBTEST: drrs-%dp-primscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-%dp-primscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-%dp-primscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-primscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%dp-primscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1].values: 1, 2
>> *
>> @@ -582,23 +499,18 @@
>> /**
>> * SUBTEST: drrs-2p-scndscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-2p-scndscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-2p-scndscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-2p-scndscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-2p-scndscrn-%s-%sflip-blt
>> * Description: Just exercise page flips with the patterns we have
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1]:
>> *
>> @@ -616,17 +528,14 @@
>> * SUBTEST: fbc-%dp-%s-fliptrack-mmap-gtt
>> * Description: Check if the hardware tracking works after page flips
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcdrrs-%dp-%s-fliptrack-mmap-gtt
>> * Description: Check if the hardware tracking works after page flips
>> * Driver requirement: i915
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-%dp-%s-fliptrack-mmap-gtt
>> * Description: Check if the hardware tracking works after page flips
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core, psr1
>> *
>> * arg[1].values: 1, 2
>> *
>> @@ -639,23 +548,18 @@
>> /**
>> * SUBTEST: drrs-%dp-primscrn-%s-indfb-move
>> * Description: Just move the %arg[2] around
>> - * Functionality: drrs, fbt
>> *
>> * SUBTEST: fbc-%dp-primscrn-%s-indfb-move
>> * Description: Just move the %arg[2] around
>> - * Functionality: fbc, fbt
>> *
>> * SUBTEST: psr-%dp-primscrn-%s-indfb-move
>> * Description: Just move the %arg[2] around
>> - * Functionality: fbt, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-move
>> * Description: Just move the %arg[2] around
>> - * Functionality: drrs, fbc, fbt
>> *
>> * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-move
>> * Description: Just move the %arg[2] around
>> - * Functionality: fbc, fbt, psr1
>> *
>> * arg[1].values: 1, 2
>> *
>> @@ -668,23 +572,18 @@
>> /**
>> * SUBTEST: drrs-2p-scndscrn-%s-indfb-move
>> * Description: Just move the %arg[1] around
>> - * Functionality: drrs, fbt
>> *
>> * SUBTEST: fbc-2p-scndscrn-%s-indfb-move
>> * Description: Just move the %arg[1] around
>> - * Functionality: fbc, fbt
>> *
>> * SUBTEST: psr-2p-scndscrn-%s-indfb-move
>> * Description: Just move the %arg[1] around
>> - * Functionality: fbt, psr1
>> *
>> * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-move
>> * Description: Just move the %arg[1] around
>> - * Functionality: drrs, fbc, fbt
>> *
>> * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-move
>> * Description: Just move the %arg[1] around
>> - * Functionality: fbc, fbt, psr1
>> *
>> * arg[1]:
>> *
>> @@ -695,23 +594,18 @@
>> /**
>> * SUBTEST: drrs-%dp-primscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[2] a few times
>> - * Functionality: drrs, fbt
>> *
>> * SUBTEST: fbc-%dp-primscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[2] a few times
>> - * Functionality: fbc, fbt
>> *
>> * SUBTEST: psr-%dp-primscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[2] a few times
>> - * Functionality: fbt, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-primscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[2] a few times
>> - * Functionality: drrs, fbc, fbt
>> *
>> * SUBTEST: fbcpsr-%dp-primscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[2] a few times
>> - * Functionality: fbc, fbt, psr1
>> *
>> * arg[1].values: 1, 2
>> *
>> @@ -724,23 +618,18 @@
>> /**
>> * SUBTEST: drrs-2p-scndscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[1] a few times
>> - * Functionality: drrs, fbt
>> *
>> * SUBTEST: fbc-2p-scndscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[1] a few times
>> - * Functionality: fbc, fbt
>> *
>> * SUBTEST: psr-2p-scndscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[1] a few times
>> - * Functionality: fbt, psr1
>> *
>> * SUBTEST: fbcdrrs-2p-scndscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[1] a few times
>> - * Functionality: drrs, fbc, fbt
>> *
>> * SUBTEST: fbcpsr-2p-scndscrn-%s-indfb-onoff
>> * Description: Just enable and disable the %arg[1] a few times
>> - * Functionality: fbc, fbt, psr1
>> *
>> * arg[1]:
>> *
>> @@ -751,43 +640,33 @@
>> /**
>> * SUBTEST: drrs-%dp-primscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: drrs, fbt
>> *
>> * SUBTEST: fbc-%dp-primscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: fbc, fbt
>> *
>> * SUBTEST: psr-%dp-primscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: fbt, psr1
>> *
>> * SUBTEST: fbcdrrs-%dp-primscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: drrs, fbc, fbt
>> *
>> * SUBTEST: fbcpsr-%dp-primscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: fbc, fbt, psr1
>> *
>> * SUBTEST: drrs-2p-scndscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: drrs, fbt
>> *
>> * SUBTEST: fbc-2p-scndscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: fbc, fbt
>> *
>> * SUBTEST: psr-2p-scndscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: fbt, psr1
>> *
>> * SUBTEST: fbcdrrs-2p-scndscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: drrs, fbc, fbt
>> *
>> * SUBTEST: fbcpsr-2p-scndscrn-spr-indfb-fullscreen
>> * Description: Put a fullscreen plane covering the whole screen
>> - * Functionality: fbc, fbt, psr1
>> *
>> * arg[1].values: 1, 2
>> */
>> @@ -795,23 +674,18 @@
>> /**
>> * SUBTEST: drrs-%s-scaledprimary
>> * Description: Try different primary plane scaling strategies
>> - * Functionality: drrs, fbt, scaling
>> *
>> * SUBTEST: fbc-%s-scaledprimary
>> * Description: Try different primary plane scaling strategies
>> - * Functionality: fbc, fbt, scaling
>> *
>> * SUBTEST: psr-%s-scaledprimary
>> * Description: Try different primary plane scaling strategies
>> - * Functionality: fbt, psr1, scaling
>> *
>> * SUBTEST: fbcdrrs-%s-scaledprimary
>> * Description: Try different primary plane scaling strategies
>> - * Functionality: drrs, fbc, fbt, scaling
>> *
>> * SUBTEST: fbcpsr-%s-scaledprimary
>> * Description: Try different primary plane scaling strategies
>> - * Functionality: fbc, fbt, psr1, scaling
>> *
>> * arg[1]:
>> *
>> @@ -822,103 +696,82 @@
>> /**
>> * SUBTEST: drrs-modesetfrombusy
>> * Description: Modeset from a busy buffer to a non-busy buffer with
>> DRRS
>> - * Functionality: drrs, fbt, scaling
>> *
>> * SUBTEST: fbc-modesetfrombusy
>> * Description: Modeset from a busy buffer to a non-busy buffer with FBC
>> - * Functionality: fbc, fbt, scaling
>> *
>> * SUBTEST: psr-modesetfrombusy
>> * Description: Modeset from a busy buffer to a non-busy buffer with PSR
>> - * Functionality: fbt, psr1, scaling
>> *
>> * SUBTEST: fbcdrrs-modesetfrombusy
>> * Description: Modeset from a busy buffer to a non-busy buffer with
>> FBC & DRRS
>> - * Functionality: drrs, fbc, fbt, scaling
>> *
>> * SUBTEST: fbcpsr-modesetfrombusy
>> * Description: Modeset from a busy buffer to a non-busy buffer with
>> FBC & PSR
>> - * Functionality: fbc, fbt, psr1, scaling
>> */
>>
>> /**
>> * SUBTEST: drrs-suspend
>> * Description: Make sure suspend/resume keeps us on the same state
>> of DRRS
>> - * Functionality: drrs, fbt, suspend
>> *
>> * SUBTEST: fbc-suspend
>> * Description: Make sure suspend/resume keeps us on the same state
>> of FBC
>> - * Functionality: fbc, fbt, suspend
>> *
>> * SUBTEST: psr-suspend
>> * Description: Make sure suspend/resume keeps us on the same state
>> of PSR
>> - * Functionality: fbt, psr1, suspend
>> *
>> * SUBTEST: fbcdrrs-suspend
>> * Description: Make sure suspend/resume keeps us on the same state
>> of FBC & DRRS
>> - * Functionality: drrs, fbc, fbt, suspend
>> *
>> * SUBTEST: fbcpsr-suspend
>> * Description: Make sure suspend/resume keeps us on the same state
>> of FBC & PSR
>> - * Functionality: fbc, fbt, psr1, suspend
>> */
>>
>> /**
>> * SUBTEST: drrs-farfromfence-mmap-gtt
>> * Description: Test drawing as far from the fence start as possible
>> * Driver requirement: i915
>> - * Functionality: drrs, fbt, kms_core
>> *
>> * SUBTEST: fbc-farfromfence-mmap-gtt
>> * Description: Test drawing as far from the fence start as possible
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core
>> *
>> * SUBTEST: psr-farfromfence-mmap-gtt
>> * Description: Test drawing as far from the fence start as possible
>> * Driver requirement: i915
>> - * Functionality: fbt, kms_core, psr1
>> *
>> * SUBTEST: fbcdrrs-farfromfence-mmap-gtt
>> * Description: Test drawing as far from the fence start as possible
>> * Driver requirement: i915
>> - * Functionality: drrs, fbc, fbt, kms_core
>> *
>> * SUBTEST: fbcpsr-farfromfence-mmap-gtt
>> * Description: Test drawing as far from the fence start as possible
>> * Driver requirement: i915
>> - * Functionality: fbc, fbt, kms_core, psr1
>> */
>>
>> /**
>> * SUBTEST: fbc-stridechange
>> * Description: Change the frontbuffer stride by doing a modeset
>> - * Functionality: fbc, fbt
>> *
>> * SUBTEST: fbcdrrs-stridechange
>> * Description: Change the frontbuffer stride by doing a modeset
>> - * Functionality: drrs, fbc, fbt
>> *
>> * SUBTEST: fbcpsr-stridechange
>> * Description: Change the frontbuffer stride by doing a modeset
>> - * Functionality: fbc, fbt, psr1
>> */
>>
>> /**
>> * SUBTEST: fbc-tiling-%s
>> * Description: Test %arg[1] formats, if the tiling format supports
>> FBC do the
>> * basic drawing test, else set the mode & test if FBC
>> is disabled
>> - * Functionality: fbc, fbt, tiling
>> *
>> * SUBTEST: fbcdrrs-tiling-%s
>> * Description: Test %arg[1] formats, if the tiling format supports
>> FBC do the
>> * basic drawing test, else set the mode & test if FBC
>> is disabled
>> - * Functionality: drrs, fbc, fbt, tiling
>> *
>> * SUBTEST: fbcpsr-tiling-%s
>> * Description: Test %arg[1] formats, if the tiling format supports
>> FBC do the
>> * basic drawing test, else set the mode & test if FBC
>> is disabled
>> - * Functionality: fbc, fbt, psr1, tiling
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/intel/kms_joiner.c b/tests/intel/kms_joiner.c
>> index 086cfeb71..e8f79a834 100644
>> --- a/tests/intel/kms_joiner.c
>> +++ b/tests/intel/kms_joiner.c
>> @@ -29,9 +29,7 @@
>> * Category: Display
>> * Description: Test big joiner
>> * Driver requirement: i915, xe
>> - * Functionality: 2p1p
>> * Mega feature: Pipe Joiner
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/intel/kms_legacy_colorkey.c
>> b/tests/intel/kms_legacy_colorkey.c
>> index 27ec64051..957e208c6 100644
>> --- a/tests/intel/kms_legacy_colorkey.c
>> +++ b/tests/intel/kms_legacy_colorkey.c
>> @@ -26,9 +26,7 @@
>> * Category: Display
>> * Description: Test to check the legacy set colorkey ioctl on sprite
>> planes.
>> * Driver requirement: i915
>> - * Functionality: plane, xorg_xv
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/intel/kms_mmap_write_crc.c
>> b/tests/intel/kms_mmap_write_crc.c
>> index 59a838fe4..24b5c70f2 100644
>> --- a/tests/intel/kms_mmap_write_crc.c
>> +++ b/tests/intel/kms_mmap_write_crc.c
>> @@ -49,9 +49,7 @@
>> * SUBTEST: main
>> * Description: Tests that caching mode has become UC/WT and flushed
>> using mmap write
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core, kms_gem_interop
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION(
>> diff --git a/tests/intel/kms_pipe_b_c_ivb.c
>> b/tests/intel/kms_pipe_b_c_ivb.c
>> index 73083408a..11236cb36 100644
>> --- a/tests/intel/kms_pipe_b_c_ivb.c
>> +++ b/tests/intel/kms_pipe_b_c_ivb.c
>> @@ -30,9 +30,7 @@
>> * Description: Exercise the FDI lane bifurcation code for IVB in the
>> kernel by
>> * setting different combinations of modes for pipes B
>> and C.
>> * Driver requirement: i915
>> - * Functionality: kms_core, obsolete_test
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/intel/kms_pm_backlight.c
>> b/tests/intel/kms_pm_backlight.c
>> index 8b59725ac..9b341c73a 100644
>> --- a/tests/intel/kms_pm_backlight.c
>> +++ b/tests/intel/kms_pm_backlight.c
>> @@ -30,9 +30,7 @@
>> * Category: Display
>> * Description: Basic backlight sysfs test
>> * Driver requirement: i915, xe
>> - * Functionality: backlight
>> * Mega feature: Display Power Management
>> - * Test category: functionality test
>> */
>>
>> #include <errno.h>
>> @@ -61,15 +59,12 @@
>> *
>> * SUBTEST: fade-with-dpms
>> * Description: Test the fade with DPMS.
>> - * Functionality: dpms, backlight
>> *
>> * SUBTEST: fade-with-suspend
>> * Description: Test the fade with suspend.
>> - * Functionality: backlight, suspend
>> *
>> * SUBTEST: brightness-with-dpms
>> * Description: test brightness with dpms on and off cycle.
>> - * Functionality: backlight, dpms
>> */
>>
>> enum {
>> diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
>> index 9551cc6b9..89af74ade 100644
>> --- a/tests/intel/kms_pm_dc.c
>> +++ b/tests/intel/kms_pm_dc.c
>> @@ -27,9 +27,6 @@
>> * Category: Display
>> * Description: Tests to validate display power DC states.
>> * Driver requirement: i915, xe
>> - * Functionality: dpms, pm_dc
>> - * Mega feature: Display Power Management
>> - * Test category: functionality test
>> */
>>
>> #include <errno.h>
>> @@ -52,7 +49,6 @@
>> * SUBTEST: dc3co-vpb-simulation
>> * Description: Make sure that system enters DC3CO when PSR2 is
>> active and system
>> * is in SLEEP state
>> - * Functionality: dc3co, pm_dc, psr2
>> *
>> * SUBTEST: dc5-dpms
>> * Description: Validate display engine entry to DC5 state while all
>> connectors's
>> @@ -64,7 +60,6 @@
>> *
>> * SUBTEST: dc5-psr
>> * Description: This test validates display engine entry to DC5 state
>> while PSR is active
>> - * Functionality: pm_dc, psr1
>> *
>> * SUBTEST: dc6-dpms
>> * Description: Validate display engine entry to DC6 state while all
>> connectors's
>> @@ -72,18 +67,15 @@
>> *
>> * SUBTEST: dc6-psr
>> * Description: This test validates display engine entry to DC6 state
>> while PSR is active
>> - * Functionality: pm_dc, psr1
>> *
>> * SUBTEST: dc9-dpms
>> * Description: This test validates display engine entry to DC9 state
>> *
>> * SUBTEST: deep-pkgc
>> * Description: This test validates display engine entry to PKGC10
>> state for extended vblank
>> - * Functionality: pm_dc
>> *
>> * SUBTEST: dc5-retention-flops
>> * Description: This test validates display engine entry to DC5 state
>> while PSR is active on Pipe B
>> - * Functionality: pm_dc
>> */
>>
>> /* DC State Flags */
>> diff --git a/tests/intel/kms_pm_lpsp.c b/tests/intel/kms_pm_lpsp.c
>> index 74e9d799a..7ebff1062 100644
>> --- a/tests/intel/kms_pm_lpsp.c
>> +++ b/tests/intel/kms_pm_lpsp.c
>> @@ -28,9 +28,7 @@
>> * TEST: kms pm lpsp
>> * Category: Display
>> * Description: These tests validates display Low Power Single Pipe
>> configurations
>> - * Functionality: pm_lpsp
>> * Mega feature: Display Power Management
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/intel/kms_pm_rpm.c b/tests/intel/kms_pm_rpm.c
>> index 24f527c2a..d22f165b8 100644
>> --- a/tests/intel/kms_pm_rpm.c
>> +++ b/tests/intel/kms_pm_rpm.c
>> @@ -12,9 +12,7 @@
>> * Category: Display
>> * Description: Test to validate Runtime PM
>> * Driver requirement: i915, xe
>> - * Functionality: pm_rpm
>> * Mega feature: Display Power Management
>> - * Test category: functionality test
>> */
>>
>> #include <limits.h> // PATH_MAX
>> @@ -51,27 +49,21 @@
>> *
>> * SUBTEST: cursor
>> * Description: Validate cursor movements along with suspends using
>> runtime PM
>> - * Functionality: cursor, pm_rpm, suspend
>> *
>> * SUBTEST: cursor-dpms
>> * Description: Validate cursor movements along with dpms using
>> runtime PM
>> - * Functionality: cursor, dpms, pm_rpm
>> *
>> * SUBTEST: dpms-lpsp
>> * Description: Validate basic modeset with dpms on lpsp screen using
>> runtime PM
>> - * Functionality: dpms, pm_rpm
>> *
>> * SUBTEST: dpms-mode-unset-lpsp
>> * Description: Validate basic modeset (negative) with dpms on lpsp
>> screen using runtime PM
>> - * Functionality: dpms, pm_rpm
>> *
>> * SUBTEST: dpms-mode-unset-non-lpsp
>> * Description: Validate basic modeset (negative) with dpms on
>> non-lpsp screen using runtime PM
>> - * Functionality: dpms, pm_rpm
>> *
>> * SUBTEST: dpms-non-lpsp
>> * Description: Validate basic modeset with dpms on non-lpsp screen
>> using runtime PM
>> - * Functionality: dpms, pm_rpm
>> *
>> * SUBTEST: drm-resources-equal
>> * Description: Validate the DRM resources reported by the IOCTLs are
>> still the same.
>> @@ -83,18 +75,15 @@
>> * SUBTEST: fences-dpms
>> * Description: Sanity test for drm fences with dpms.
>> * Driver requirement: i915
>> - * Functionality: dpms, pm_rpm
>> *
>> * SUBTEST: i2c
>> * Description: Validate exposed edids using raw I2C read method.
>> *
>> * SUBTEST: legacy-planes
>> * Description: Validate legacy plane (set/unset/change).
>> - * Functionality: pm_rpm, plane
>> *
>> * SUBTEST: legacy-planes-dpms
>> * Description: Validate legacy plane (set/unset/change) with dpms.
>> - * Functionality: pm_rpm, plane
>> *
>> * SUBTEST: modeset-lpsp
>> * Description: Validate basic modeset on lpsp screen using runtime PM
>> @@ -130,19 +119,15 @@
>> * SUBTEST: pm-tiling
>> * Description: Test to change different tiling methods & check for rpm
>> * Driver requirement: i915
>> - * Functionality: pm_rpm, tiling
>> *
>> * SUBTEST: system-suspend-modeset
>> * Description: Validate basic modeset with suspend
>> - * Functionality: pm_rpm, suspend
>> *
>> * SUBTEST: universal-planes
>> * Description: Validate universal plane (set/unset/change).
>> - * Functionality: pm_rpm, plane
>> *
>> * SUBTEST: universal-planes-dpms
>> * Description: Validate universal plane (set/unset/change) with dpms.
>> - * Functionality: pm_rpm, plane
>> */
>>
>> #define MSR_PC8_RES 0x630
>> diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
>> index ad49c18f0..a7b24ea7e 100644
>> --- a/tests/intel/kms_psr.c
>> +++ b/tests/intel/kms_psr.c
>> @@ -28,7 +28,6 @@
>> * Description: Tests behaviour of PSR & PSR2 & PR
>> * Driver requirement: i915, xe
>> * Mega feature: PSR
>> - * Test category: functionality test
>> */
>>
>> #include "i915/intel_fbc.h"
>> @@ -47,39 +46,31 @@
>> /**
>> * SUBTEST: %s-basic
>> * Description: Basic check for %arg[1] if it is detecting changes
>> made in planes
>> - * Functionality: %arg[1]
>> *
>> * SUBTEST: fbc-%s-basic
>> * Description: Basic check for fbc with %arg[1] if it is detecting
>> changes made in planes
>> - * Functionality: %arg[1], fbc
>> *
>> * SUBTEST: %s-dpms
>> * Description: Check if %arg[1] is detecting changes when rendering
>> operation
>> * is performed with dpms enabled or disabled
>> - * Functionality: %arg[1], dpms
>> *
>> * SUBTEST: fbc-%s-dpms
>> * Description: Check if fbc with %arg[1] is detecting changes when
>> rendering operation
>> * is performed with dpms enabled or disabled
>> - * Functionality: %arg[1], dpms, fbc
>> *
>> * SUBTEST: %s-no-drrs
>> * Description: Check if %arg[1] is detecting changes when drrs is
>> disabled
>> - * Functionality: %arg[1], drrs
>> *
>> * SUBTEST: fbc-%s-no-drrs
>> * Description: Check if fbc with %arg[1] is detecting changes when
>> drrs is disabled
>> - * Functionality: %arg[1], drrs, fbc
>> *
>> * SUBTEST: %s-suspend
>> * Description: Check if %arg[1] is detecting changes when plane
>> operation is
>> * performed with suspend resume cycles
>> - * Functionality: %arg[1], suspend
>> *
>> * SUBTEST: fbc-%s-suspend
>> * Description: Check if fbc with %arg[1] is detecting changes when
>> plane operation is
>> * performed with suspend resume cycles
>> - * Functionality: %arg[1], suspend, fbc
>> *
>> * arg[1]:
>> *
>> @@ -92,13 +83,11 @@
>> * Description: Check if %arg[1] is detecting memory mapping %arg[3]
>> operations
>> * performed on %arg[2] planes
>> * Driver requirement: i915
>> - * Functionality: %arg[1], plane
>> *
>> * SUBTEST: fbc-%s-%s-%s
>> * Description: Check if fbc with %arg[1] is detecting memory mapping
>> %arg[3] operations
>> * performed on %arg[2] planes
>> * Driver requirement: i915
>> - * Functionality: %arg[1], plane, fbc
>> *
>> * arg[1]:
>> *
>> @@ -121,22 +110,18 @@
>> * SUBTEST: %s-primary-page-flip
>> * Description: Check if %arg[1] is detecting page-flipping operation
>> * performed on primary plane
>> - * Functionality: %arg[1], plane
>> *
>> * SUBTEST: fbc-%s-primary-page-flip
>> * Description: Check if fbc with %arg[1] is detecting page-flipping
>> operation
>> * performed on primary plane
>> - * Functionality: %arg[1], plane, fbc
>> *
>> * SUBTEST: %s-primary-%s
>> * Description: Check if %arg[1] is detecting rendering operations
>> %arg[2]
>> * when performed on primary plane
>> - * Functionality: %arg[1], plane
>> *
>> * SUBTEST: fbc-%s-primary-%s
>> * Description: Check if %arg[1] is detecting rendering operations
>> %arg[2]
>> * when performed on primary plane
>> - * Functionality: %arg[1], plane, fbc
>> *
>> * arg[1]:
>> *
>> @@ -153,12 +138,10 @@
>> * SUBTEST: %s-%s-%s
>> * Description: Check if %arg[1] is detecting rendering and plane
>> * operations %arg[3] performed on %arg[2] planes
>> - * Functionality: %arg[1], plane
>> *
>> * SUBTEST: fbc-%s-%s-%s
>> * Description: Check if fbc with %arg[1] is detecting rendering and
>> plane
>> * operations %arg[3] performed on %arg[2] planes
>> - * Functionality: %arg[1], plane, fbc
>> *
>> * arg[1]:
>> *
>> @@ -181,46 +164,38 @@
>> /**
>> * SUBTEST: pr-basic
>> * Description: Basic check for pr if it is detecting changes made in
>> planes
>> - * Functionality: pr
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: fbc-pr-basic
>> * Description: Basic check for fbc with pr if it is detecting
>> changes made in planes
>> - * Functionality: pr, fbc
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: pr-dpms
>> * Description: Check if pr is detecting changes when rendering
>> operation
>> * is performed with dpms enabled or disabled
>> - * Functionality: pr, dpms
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: fbc-pr-dpms
>> * Description: Check if fbc with pr is detecting changes when
>> rendering operation
>> * is performed with dpms enabled or disabled
>> - * Functionality: pr, dpms, fbc
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: pr-no-drrs
>> * Description: Check if pr is detecting changes when drrs is disabled
>> - * Functionality: pr, drrs
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: fbc-pr-no-drrs
>> * Description: Check if fbc with pr is detecting changes when drrs
>> is disabled
>> - * Functionality: pr, drrs, fbc
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: pr-suspend
>> * Description: Check if pr is detecting changes when plane operation is
>> * performed with suspend resume cycles
>> - * Functionality: pr, suspend
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: fbc-pr-suspend
>> * Description: Check if fbc with pr is detecting changes when plane
>> operation is
>> * performed with suspend resume cycles
>> - * Functionality: pr, suspend, fbc
>> * Mega feature: Panel Replay
>> */
>>
>> @@ -229,14 +204,12 @@
>> * Description: Check if pr is detecting memory mapping %arg[2]
>> operations
>> * performed on %arg[1] planes
>> * Driver requirement: i915
>> - * Functionality: pr, plane
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: fbc-pr-%s-%s
>> * Description: Check if fbc with pr is detecting memory mapping
>> %arg[2] operations
>> * performed on %arg[1] planes
>> * Driver requirement: i915
>> - * Functionality: pr, plane, fbc
>> * Mega feature: Panel Replay
>> *
>> * arg[1]:
>> @@ -255,25 +228,21 @@
>> * SUBTEST: pr-primary-page-flip
>> * Description: Check if pr is detecting page-flipping operation
>> * performed on primary plane
>> - * Functionality: pr, plane
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: fbc-pr-primary-page-flip
>> * Description: Check if fbc with pr is detecting page-flipping
>> operation
>> * performed on primary plane
>> - * Functionality: pr, plane, fbc
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: pr-primary-%s
>> * Description: Check if pr is detecting rendering operations %arg[1]
>> * when performed on primary plane
>> - * Functionality: pr, plane
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: fbc-pr-primary-%s
>> * Description: Check if fbc with pr is detecting rendering
>> operations %arg[1]
>> * when performed on primary plane
>> - * Functionality: pr, plane, fbc
>> * Mega feature: Panel Replay
>> *
>> * arg[1]:
>> @@ -286,13 +255,11 @@
>> * SUBTEST: pr-%s-%s
>> * Description: Check if pr is detecting rendering and plane
>> * operations %arg[2] performed on %arg[1] planes
>> - * Functionality: pr, plane
>> * Mega feature: Panel Replay
>> *
>> * SUBTEST: fbc-pr-%s-%s
>> * Description: Check if fbc with pr is detecting rendering and plane
>> * operations %arg[2] performed on %arg[1] planes
>> - * Functionality: pr, plane, fbc
>> * Mega feature: Panel Replay
>> *
>> * arg[1]:
>> diff --git a/tests/intel/kms_psr2_sf.c b/tests/intel/kms_psr2_sf.c
>> index cd4226070..e982c3bdd 100644
>> --- a/tests/intel/kms_psr2_sf.c
>> +++ b/tests/intel/kms_psr2_sf.c
>> @@ -28,9 +28,7 @@
>> * Description: Tests to verify PSR2 selective fetch by sending
>> multiple damaged
>> * areas with and without fbc
>> * Driver requirement: i915, xe
>> - * Functionality: plane, psr2, selective_fetch
>> * Mega feature: PSR
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -52,18 +50,15 @@
>> * Mega feature: Panel Replay
>> * Description: Test that selective fetch works on moving %arg[1]
>> plane %arg[2]
>> * visible area (no update)
>> - * Functionality: plane, pr, selective_fetch
>> *
>> * SUBTEST: fbc-psr2-%s-plane-move-continuous-%s
>> * Description: Test that fbc with selective fetch works on moving
>> %arg[1] plane %arg[2]
>> * visible area (no update)
>> - * Functionality: plane, psr2, selective_fetch, fbc
>> *
>> * SUBTEST: fbc-pr-%s-plane-move-continuous-%s
>> * Mega feature: Panel Replay
>> * Description: Test that fbc with selective fetch works on moving
>> %arg[1] plane %arg[2]
>> * visible area (no update)
>> - * Functionality: plane, pr, selective_fetch, fbc
>> *
>> * arg[1]:
>> *
>> @@ -84,16 +79,13 @@
>> * SUBTEST: pr-cursor-plane-update-sf
>> * Mega feature: Panel Replay
>> * Description: Test that selective fetch works on cursor plane
>> - * Functionality: plane, pr, selective_fetch
>> *
>> * SUBTEST: fbc-psr2-cursor-plane-update-sf
>> * Description: Test that fbc with selective fetch works on cursor plane
>> - * Functionality: plane, psr2, selective_fetch, fbc
>> *
>> * SUBTEST: fbc-pr-cursor-plane-update-sf
>> * Mega feature: Panel Replay
>> * Description: Test that fbc with selective fetch works on cursor plane
>> - * Functionality: plane, pr, selective_fetch, fbc
>> *
>> * SUBTEST: psr2-overlay-plane-update-continuous-sf
>> * Description: Test that selective fetch works on overlay plane
>> @@ -101,16 +93,13 @@
>> * SUBTEST: pr-overlay-plane-update-continuous-sf
>> * Mega feature: Panel Replay
>> * Description: Test that selective fetch works on overlay plane
>> - * Functionality: plane, pr, selective_fetch
>> *
>> * SUBTEST: fbc-psr2-overlay-plane-update-sf-dmg-area
>> * Description: Test that fbc with selective fetch works on overlay
>> plane
>> - * Functionality: plane, psr2, selective_fetch, fbc
>> *
>> * SUBTEST: fbc-pr-overlay-plane-update-sf-dmg-area
>> * Mega feature: Panel Replay
>> * Description: Test that fbc with selective fetch works on overlay
>> plane
>> - * Functionality: plane, pr, selective_fetch, fbc
>> *
>> * SUBTEST: psr2-overlay-plane-update-sf-dmg-area
>> * Description: Test that selective fetch works on overlay plane
>> @@ -118,16 +107,13 @@
>> * SUBTEST: pr-overlay-plane-update-sf-dmg-area
>> * Mega feature: Panel Replay
>> * Description: Test that selective fetch works on overlay plane
>> - * Functionality: plane, pr, selective_fetch
>> *
>> * SUBTEST: fbc-psr2-overlay-plane-update-continuous-sf
>> * Description: Test that fbc with selective fetch works on overlay
>> plane
>> - * Functionality: plane, psr2, selective_fetch, fbc
>> *
>> * SUBTEST: fbc-pr-overlay-plane-update-continuous-sf
>> * Mega feature: Panel Replay
>> * Description: Test that fbc with selective fetch works on overlay
>> plane
>> - * Functionality: plane, pr, selective_fetch, fbc
>> *
>> * SUBTEST: psr2-overlay-primary-update-sf-dmg-area
>> * Description: Test that selective fetch works on primary plane with
>> blended
>> @@ -137,18 +123,15 @@
>> * Mega feature: Panel Replay
>> * Description: Test that selective fetch works on primary plane with
>> blended
>> * overlay plane
>> - * Functionality: plane, pr, selective_fetch
>> *
>> * SUBTEST: fbc-psr2-overlay-primary-update-sf-dmg-area
>> * Description: Test that fbc with selective fetch works on primary
>> plane with blended
>> * overlay plane
>> - * Functionality: plane, psr2, selective_fetch, fbc
>> *
>> * SUBTEST: fbc-pr-overlay-primary-update-sf-dmg-area
>> * Mega feature: Panel Replay
>> * Description: Test that fbc with selective fetch works on primary
>> plane with blended
>> * overlay plane
>> - * Functionality: plane, pr, selective_fetch, fbc
>> *
>> * SUBTEST: psr2-plane-move-sf-dmg-area
>> * Description: Test that selective fetch works on moving overlay plane
>> @@ -156,16 +139,13 @@
>> * SUBTEST: pr-plane-move-sf-dmg-area
>> * Mega feature: Panel Replay
>> * Description: Test that selective fetch works on moving overlay plane
>> - * Functionality: plane, pr, selective_fetch
>> *
>> * SUBTEST: fbc-psr2-plane-move-sf-dmg-area
>> * Description: Test that fbc with selective fetch works on moving
>> overlay plane
>> - * Functionality: plane, psr2, selective_fetch, fbc
>> *
>> * SUBTEST: fbc-pr-plane-move-sf-dmg-area
>> * Mega feature: Panel Replay
>> * Description: Test that fbc with selective fetch works on moving
>> overlay plane
>> - * Functionality: plane, pr, selective_fetch, fbc
>> *
>> * SUBTEST: psr2-primary-plane-update-sf-dmg-area
>> * Description: Test that selective fetch works on primary plane
>> @@ -173,25 +153,20 @@
>> * SUBTEST: pr-primary-plane-update-sf-dmg-area
>> * Mega feature: Panel Replay
>> * Description: Test that selective fetch works on primary plane
>> - * Functionality: plane, pr, selective_fetch
>> *
>> * SUBTEST: fbc-psr2-primary-plane-update-sf-dmg-area
>> * Description: Test that fbc with selective fetch works on primary
>> plane
>> - * Functionality: plane, psr2, selective_fetch, fbc
>> *
>> * SUBTEST: fbc-pr-primary-plane-update-sf-dmg-area
>> * Mega feature: Panel Replay
>> * Description: Test that fbc with selective fetch works on primary
>> plane
>> - * Functionality: plane, pr, selective_fetch, fbc
>> *
>> * SUBTEST: psr2-primary-plane-update-sf-dmg-area-big-fb
>> * Description: Test that selective fetch works on primary plane with
>> big fb
>> - * Functionality: plane, psr2, selective_fetch, big_fbs
>> *
>> * SUBTEST: pr-primary-plane-update-sf-dmg-area-big-fb
>> * Mega feature: Panel Replay
>> * Description: Test that selective fetch works on primary plane with
>> big fb
>> - * Functionality: plane, pr, selective_fetch, big_fbs
>> */
>>
>> IGT_TEST_DESCRIPTION("Tests to verify PSR2 selective fetch by sending
>> multiple"
>> diff --git a/tests/intel/kms_psr_stress_test.c
>> b/tests/intel/kms_psr_stress_test.c
>> index 73a6eb56d..89dd377da 100644
>> --- a/tests/intel/kms_psr_stress_test.c
>> +++ b/tests/intel/kms_psr_stress_test.c
>> @@ -3,9 +3,7 @@
>> * TEST: kms psr stress test
>> * Category: Display
>> * Driver requirement: i915, xe
>> - * Functionality: plane, psr1
>> * Mega feature: PSR
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/intel/kms_pwrite_crc.c b/tests/intel/kms_pwrite_crc.c
>> index 338c92c3a..b40a423b1 100644
>> --- a/tests/intel/kms_pwrite_crc.c
>> +++ b/tests/intel/kms_pwrite_crc.c
>> @@ -40,9 +40,7 @@
>> * Description: Use the display CRC support to validate pwrite to an
>> already
>> * uncached future scanout buffer.
>> * Driver requirement: i915
>> - * Functionality: crc, kms_core, kms_gem_interop
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION(
>> diff --git a/tests/kms_3d.c b/tests/kms_3d.c
>> index 8e9e9929c..bdbf389b4 100644
>> --- a/tests/kms_3d.c
>> +++ b/tests/kms_3d.c
>> @@ -35,9 +35,7 @@
>> * SUBTEST:
>> * Description: Tests 3D mode setting.
>> * Driver requirement: i915, xe
>> - * Functionality: stereoscopic
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION("Tests 3D mode setting.");
>> diff --git a/tests/kms_addfb_basic.c b/tests/kms_addfb_basic.c
>> index 30ca8b016..e5ff9ea32 100644
>> --- a/tests/kms_addfb_basic.c
>> +++ b/tests/kms_addfb_basic.c
>> @@ -30,9 +30,7 @@
>> * Category: Display
>> * Description: Sanity test for ioctls DRM_IOCTL_MODE_ADDFB2 &
>> DRM_IOCTL_MODE_RMFB.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_gem_interop
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -61,12 +59,10 @@
>> *
>> * SUBTEST: unused-modifier
>> * Description: Test that addfb2 call fails correctly for unused
>> modifier
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: clobberred-modifier
>> * Description: Check if addfb2 call works for clobbered modifier
>> * Driver requirement: i915
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: invalid-smem-bo-on-discrete
>> * Description: Check if addfb2 with a system memory gem object fails
>> correctly
>> @@ -98,22 +94,18 @@
>> /**
>> * SUBTEST: basic-x-tiled-legacy
>> * Description: Check if addfb2 and rmfb call works for basic
>> x-tiling test
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: basic-y-tiled-legacy
>> * Description: Check if addfb2 and rmfb call works for basic
>> y-tiling test
>> * Driver requirement: i915
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: framebuffer-vs-set-tiling
>> * Description: Check if addfb2 call works for x and y tiling
>> * Driver requirement: i915
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: tile-pitch-mismatch
>> * Description: Test that addfb2 call fails correctly for pitches
>> mismatch
>> * Driver requirement: i915
>> - * Functionality: kms_gem_interop, tiling
>> */
>>
>> /**
>> @@ -135,41 +127,33 @@
>> * SUBTEST: bo-too-small-due-to-tiling
>> * Description: Test that addfb2 call fails correctly with small
>> buffer object
>> * after changing tile
>> - * Functionality: kms_gem_interop, tiling
>> */
>>
>> /**
>> * SUBTEST: addfb25-modifier-no-flag
>> * Description: Test that addfb2 call fails correctly for x-tiling
>> with given modifier
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: addfb25-bad-modifier
>> * Description: Test that addfb2 call fails correctly for irrelevant
>> modifier
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: addfb25-x-tiled-mismatch-legacy
>> * Description: Test that addfb2 call fails correctly for irrelevant
>> x-tiling
>> * Driver requirement: i915
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: addfb25-x-tiled-legacy
>> * Description: Check if addfb2 call works for x-tiling
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: addfb25-framebuffer-vs-set-tiling
>> * Description: Check if addfb2 call works for relevant combination
>> of tiling and fbs
>> * Driver requirement: i915
>> - * Functionality: kms_gem_interop, tiling
>> */
>>
>> /**
>> * SUBTEST: addfb25-y-tiled-%s
>> * Description: Check if addfb2 call works for y-tiling %arg[1]
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: addfb25-yf-tiled-legacy
>> * Description: Check if addfb2 call works for yf-tiling
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * arg[1]:
>> *
>> @@ -180,7 +164,6 @@
>> /**
>> * SUBTEST: addfb25-4-tiled
>> * Description: Check if addfb2 call works for tiling-4
>> - * Functionality: kms_gem_interop, tiling
>> *
>> * SUBTEST: invalid-%s-%s
>> * Description: Test that %arg[1] ioctl call fails correctly for
>> %arg[2] object
>> diff --git a/tests/kms_async_flips.c b/tests/kms_async_flips.c
>> index 4a72be7b5..da426f753 100644
>> --- a/tests/kms_async_flips.c
>> +++ b/tests/kms_async_flips.c
>> @@ -30,9 +30,7 @@
>> * Category: Display
>> * Description: Test asynchronous page flips.
>> * Driver requirement: i915, xe
>> - * Functionality: async_flips, vblank
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -58,11 +56,9 @@
>> *
>> * SUBTEST: test-cursor
>> * Description: Verify that the DRM_IOCTL_MODE_CURSOR passes after
>> async flip
>> - * Functionality: async_flips, cursor, vblank
>> *
>> * SUBTEST: crc
>> * Description: Use CRC to verify async flip scans out the correct
>> framebuffer
>> - * Functionality: async_flips, crc, vblank
>> *
>> * SUBTEST: invalid-async-flip
>> * Description: Negative case to verify if changes in fb are rejected
>> from kernel as expected
>> diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
>> index 489b0d709..1f8b23d6d 100644
>> --- a/tests/kms_atomic.c
>> +++ b/tests/kms_atomic.c
>> @@ -32,9 +32,7 @@
>> * Category: Display
>> * Description: Test atomic modesetting API
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core, plane
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <unistd.h>
>> @@ -57,7 +55,6 @@
>> * Description: Test abuse the atomic ioctl directly in order to test
>> various
>> * invalid conditions which the libdrm wrapper won't
>> allow us to
>> * create.
>> - * Functionality: kms_core
>> *
>> * SUBTEST: atomic-plane-damage
>> * Description: Simple test cases to use FB_DAMAGE_CLIPS plane property
>> @@ -65,7 +62,6 @@
>> * SUBTEST: test-only
>> * Description: Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really
>> only touches
>> * the free-standing state objects and nothing else.
>> - * Functionality: kms_core
>> *
>> * SUBTEST: plane-primary-overlay-mutable-zpos
>> * Description: Verify that the overlay plane can cover the primary
>> one (and
>> diff --git a/tests/kms_atomic_interruptible.c
>> b/tests/kms_atomic_interruptible.c
>> index 962c33f6f..19fbcab99 100644
>> --- a/tests/kms_atomic_interruptible.c
>> +++ b/tests/kms_atomic_interruptible.c
>> @@ -27,7 +27,6 @@
>> * Description: Tests that interrupt various atomic ioctls.
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <signal.h>
>> @@ -39,7 +38,6 @@
>> /**
>> * SUBTEST: %s-setmode
>> * Description: Tests the interrupt properties of %arg[1] modeset
>> - * Functionality: kms_core
>> *
>> * arg[1]:
>> *
>> @@ -50,19 +48,15 @@
>> /**
>> * SUBTEST: legacy-cursor
>> * Description: Tests the interrupt properties for Cursor
>> - * Functionality: cursor, kms_core
>> *
>> * SUBTEST: legacy-dpms
>> * Description: Tests the interrupt properties for DPMS
>> - * Functionality: dpms, kms_core
>> *
>> * SUBTEST: legacy-pageflip
>> * Description: Tests the interrupt properties for page flip
>> - * Functionality: kms_core
>> *
>> * SUBTEST: universal-setplane-%s
>> * Description: Tests the interrupt properties for %arg[1]
>> - * Functionality: kms_core, plane
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_atomic_transition.c
>> b/tests/kms_atomic_transition.c
>> index f4f8afc66..0342af206 100644
>> --- a/tests/kms_atomic_transition.c
>> +++ b/tests/kms_atomic_transition.c
>> @@ -25,9 +25,7 @@
>> * TEST: kms atomic transition
>> * Category: Display
>> * Driver requirement: i915, xe
>> - * Functionality: plane, watermark
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -46,7 +44,6 @@
>> /**
>> * SUBTEST: plane-primary-toggle-with-vblank-wait
>> * Description: Check toggling of primary plane with vblank
>> - * Functionality: plane, vblank, watermark
>> *
>> * SUBTEST: plane-all-modeset-%s
>> * Description: Modeset test for all plane combinations %arg[1]
>> @@ -60,7 +57,6 @@
>> /**
>> * SUBTEST: plane-all-modeset-%s
>> * Description: Modeset test for all plane combinations %arg[1]
>> - * Functionality: plane, watermark, edp
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_bw.c b/tests/kms_bw.c
>> index 2c42acbdc..ca05695d3 100644
>> --- a/tests/kms_bw.c
>> +++ b/tests/kms_bw.c
>> @@ -25,9 +25,7 @@
>> * Category: Display
>> * Description: BW test with different resolutions
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: Display Latency/Bandwidth
>> - * Test category: functionality test
>> */
>>
>> #include "drm_mode.h"
>> diff --git a/tests/kms_color.c b/tests/kms_color.c
>> index 4b71d3dd3..91363c54e 100644
>> --- a/tests/kms_color.c
>> +++ b/tests/kms_color.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test Color Features at Pipe level
>> * Driver requirement: i915, xe
>> - * Functionality: colorspace
>> * Mega feature: Color Management
>> - * Test category: functionality test
>> */
>>
>> #include "kms_color_helper.h"
>> diff --git a/tests/kms_concurrent.c b/tests/kms_concurrent.c
>> index ce0261287..86e9eae67 100644
>> --- a/tests/kms_concurrent.c
>> +++ b/tests/kms_concurrent.c
>> @@ -37,9 +37,7 @@
>> * Description: Test atomic mode setting concurrently with multiple
>> planes and
>> * screen resolution.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION("Test atomic mode setting concurrently with
>> multiple planes and screen resolution");
>> diff --git a/tests/kms_content_protection.c
>> b/tests/kms_content_protection.c
>> index 04dff7a05..6fe1edbc4 100644
>> --- a/tests/kms_content_protection.c
>> +++ b/tests/kms_content_protection.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test content protection (HDCP)
>> * Driver requirement: i915, xe
>> - * Functionality: hdcp1.4
>> * Mega feature: HDCP
>> - * Test category: functionality test
>> */
>>
>> #include <poll.h>
>> @@ -45,21 +43,17 @@
>> /**
>> * SUBTEST: lic-type-0
>> * Description: Test for the integrity of link for type-0 content.
>> - * Functionality: hdcp1.4, hdcp2.2
>> *
>> * SUBTEST: lic-type-1
>> * Description: Test for the integrity of link for type-1 content.
>> - * Functionality: hdcp2.2
>> *
>> * SUBTEST: content-type-change
>> * Description: Test the content type change when the content
>> protection already
>> * enabled
>> - * Functionality: hdcp1.4, hdcp2.2
>> *
>> * SUBTEST: mei-interface
>> * Description: Test the teardown and rebuild of the interface
>> between Intel
>> * and mei hdcp.
>> - * Functionality: hdcp1.4, hdcp2.2
>> *
>> * SUBTEST: srm
>> * Description: This test writes the facsimile SRM into the
>> /lib/firmware/ and
>> @@ -83,7 +77,6 @@
>> /**
>> * SUBTEST: dp-mst-%s
>> * Description: Test Content protection %arg[1] over DP MST.
>> - * Functionality: hdcp1.4, mst
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
>> index 7c6f61f55..58d9bda9f 100644
>> --- a/tests/kms_cursor_crc.c
>> +++ b/tests/kms_cursor_crc.c
>> @@ -34,9 +34,7 @@
>> * was disabled and its drawing is directly inserted on
>> the PF by
>> * software.
>> * Driver requirement: i915, xe
>> - * Functionality: cursor
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -49,15 +47,12 @@
>> /**
>> * SUBTEST: cursor-dpms
>> * Description: Check random placement of a cursor with DPMS.
>> - * Functionality: cursor, dpms
>> *
>> * SUBTEST: cursor-suspend
>> * Description: Check random placement of a cursor with suspend.
>> - * Functionality: cursor, suspend
>> *
>> * SUBTEST: cursor-size-hints
>> * Description: Check that sizes declared in SIZE_HINTS are accepted.
>> - * Functionality: cursor
>> *
>> * SUBTEST: cursor-%s
>> * Description: %arg[1]
>> diff --git a/tests/kms_cursor_edge_walk.c b/tests/kms_cursor_edge_walk.c
>> index 54e9dc92f..858d1da9b 100644
>> --- a/tests/kms_cursor_edge_walk.c
>> +++ b/tests/kms_cursor_edge_walk.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test to check different cursor sizes by walking
>> different edges of screen
>> * Driver requirement: i915, xe
>> - * Functionality: cursor
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_cursor_legacy.c b/tests/kms_cursor_legacy.c
>> index 533972cd4..44f031e7b 100644
>> --- a/tests/kms_cursor_legacy.c
>> +++ b/tests/kms_cursor_legacy.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Stress legacy cursor ioctl
>> * Driver requirement: i915, xe
>> - * Functionality: cursor
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <poll.h>
>> diff --git a/tests/kms_display_modes.c b/tests/kms_display_modes.c
>> index e41c60cc0..bbeceafbd 100644
>> --- a/tests/kms_display_modes.c
>> +++ b/tests/kms_display_modes.c
>> @@ -30,7 +30,6 @@
>> * Description: Test Display Modes
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -39,12 +38,10 @@
>> * SUBTEST: extended-mode-basic
>> * Description: Test for validating display extended mode with a pair
>> of connected
>> * displays
>> - * Functionality: kms_core
>> *
>> * SUBTEST: mst-extended-mode-negative
>> * Description: Negative test for validating display extended mode
>> with a pair
>> * of connected 2k-4k or 4k-4k displays.
>> - * Functionality: kms_core, mst
>> */
>>
>> #define HDISPLAY_4K 3840
>> diff --git a/tests/kms_dither.c b/tests/kms_dither.c
>> index ce4172117..426caaaa8 100644
>> --- a/tests/kms_dither.c
>> +++ b/tests/kms_dither.c
>> @@ -30,9 +30,7 @@
>> * Category: Display
>> * Description: Test Dithering block status
>> * Driver requirement: i915, xe
>> - * Functionality: colorspace, kms_gem_interop
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_dp_aux_dev.c b/tests/kms_dp_aux_dev.c
>> index c8ada3fec..24cfdcb68 100644
>> --- a/tests/kms_dp_aux_dev.c
>> +++ b/tests/kms_dp_aux_dev.c
>> @@ -42,9 +42,7 @@
>> * SUBTEST:
>> * Description: Test that /dev/drm_dp_aux reads work
>> * Driver requirement: i915, xe
>> - * Functionality: dp_aux, edp, dp
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION("Test that /dev/drm_dp_aux reads work");
>> diff --git a/tests/kms_feature_discovery.c
>> b/tests/kms_feature_discovery.c
>> index 5bca9ad76..a4f96e2a7 100644
>> --- a/tests/kms_feature_discovery.c
>> +++ b/tests/kms_feature_discovery.c
>> @@ -29,9 +29,7 @@
>> * The subtests here should only skip or pass,
>> * anything else means we have a serious problem.
>> * Driver requirement: i915, xe
>> - * Functionality: feature_discovery
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -53,22 +51,17 @@
>> *
>> * SUBTEST: chamelium
>> * Description: Make sure that Chamelium is configured and reachable.
>> - * Functionality: feature_discovery, chamelium
>> *
>> * SUBTEST: psr1
>> * Description: Make sure that we have eDP panel with PSR1 support.
>> - * Functionality: feature_discovery, psr1, edp
>> * Mega feature: PSR
>> *
>> * SUBTEST: psr2
>> * Description: Make sure that we have eDP panel with PSR2 support.
>> - * Functionality: feature_discovery, psr2, edp
>> * Mega feature: PSR
>> *
>> * SUBTEST: dp-mst
>> * Description: Make sure that we have DP-MST configuration.
>> - * Functionality: feature_discovery, mst
>> - * Test category: functionality test
>> *
>> * arg[1].values: 1, 2, 3, 4
>> */
>> diff --git a/tests/kms_flip.c b/tests/kms_flip.c
>> index 3ad4d0afb..213b731ec 100755
>> --- a/tests/kms_flip.c
>> +++ b/tests/kms_flip.c
>> @@ -26,9 +26,7 @@
>> * Category: Display
>> * Description: Tests for validating modeset, dpms and pageflips
>> * Driver requirement: i915, xe
>> - * Functionality: vblank
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "config.h"
>> @@ -62,13 +60,11 @@
>> * SUBTEST: %s
>> * Description: %arg[1] test to validate pageflips with available fences
>> * Driver requirement: i915
>> - * Functionality: gtt, vblank
>> *
>> * SUBTEST: 2x-%s
>> * Description: %arg[1] test to validate pageflips along with
>> available fences
>> * on a pair of connected displays
>> * Driver requirement: i915
>> - * Functionality: gtt, vblank
>> *
>> * arg[1]:
>> *
>> @@ -79,7 +75,6 @@
>> /**
>> * SUBTEST: dpms-off-%s
>> * Description: %arg[1] test to validate pageflips by disabling other
>> connectors usng dpms
>> - * Functionality: dpms, vblank
>> *
>> * arg[1]:
>> *
>> @@ -90,7 +85,6 @@
>> /**
>> * SUBTEST: %s
>> * Description: %arg[1] test to validate pageflips with large BO in size
>> - * Functionality: kms_gem_interop, vblank
>> *
>> * arg[1]:
>> *
>> @@ -101,11 +95,9 @@
>> /**
>> * SUBTEST: %s
>> * Description: Basic test to validate %arg[1]
>> - * Functionality: hang, vblank
>> *
>> * SUBTEST: 2x-%s
>> * Description: Test to validate %arg[1] on a pair of connected displays
>> - * Functionality: hang, vblank
>> *
>> * arg[1]:
>> *
>> @@ -141,12 +133,10 @@
>> /**
>> * SUBTEST: %s
>> * Description: %arg[1] test to validate pageflips with suspend cycle
>> - * Functionality: suspend, vblank
>> *
>> * SUBTEST: 2x-%s
>> * Description: %arg[1] test to validate pageflips with suspend cycle
>> on a pair
>> * of connected displays
>> - * Functionality: suspend, vblank
>> *
>> * arg[1]:
>> *
>> @@ -157,11 +147,9 @@
>> /**
>> * SUBTEST: %s
>> * Description: Basic test to validate %arg[1]
>> - * Functionality: dpms, vblank
>> *
>> * SUBTEST: 2x-%s
>> * Description: Basic test to validate %arg[1] on a pair of connected
>> displays
>> - * Functionality: dpms, vblank
>> *
>> * SUBTEST: %s-interruptible
>> * Description: Basic test to validate %arg[1]
>> @@ -182,7 +170,6 @@
>> * SUBTEST: 2x-flip-vs-dpms
>> * Description: Basic test to validate pageflip along with dpms on a
>> pair of
>> * connected displays
>> - * Functionality: dpms, vblank
>> *
>> * SUBTEST: 2x-%s
>> * Description: Basic test to validate %arg[1] on a pair of connected
>> displays
>> @@ -228,7 +215,6 @@
>> *
>> * SUBTEST: basic-flip-vs-dpms
>> * Description: Basic test to valide pageflip with dpms
>> - * Functionality: dpms, vblank
>> *
>> * SUBTEST: basic-flip-vs-%s
>> * Description: Basic test to valide pageflip with %arg[1]
>> diff --git a/tests/kms_flip_event_leak.c b/tests/kms_flip_event_leak.c
>> index a668b1da3..56d5128b8 100644
>> --- a/tests/kms_flip_event_leak.c
>> +++ b/tests/kms_flip_event_leak.c
>> @@ -44,9 +44,7 @@
>> * completed. The test itself won't fail even if the
>> kernel leaks
>> * the event, but the resulting dmesg WARN will indicate
>> a failure.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> typedef struct {
>> diff --git a/tests/kms_force_connector_basic.c
>> b/tests/kms_force_connector_basic.c
>> index 392a02f7e..f554e997c 100644
>> --- a/tests/kms_force_connector_basic.c
>> +++ b/tests/kms_force_connector_basic.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Check the debugfs force connector/edid features work
>> correctly.
>> * Driver requirement: i915, xe
>> - * Functionality: force_connector
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -38,7 +36,6 @@
>> * SUBTEST: force-load-detect
>> * Description: Test to detect forced load.
>> * Driver requirement: i915
>> - * Functionality: force_connector, vga
>> *
>> * SUBTEST: force-connector-state
>> * Description: Test to check the forced connector state
>> diff --git a/tests/kms_getfb.c b/tests/kms_getfb.c
>> index 9cc783776..496d2c45a 100644
>> --- a/tests/kms_getfb.c
>> +++ b/tests/kms_getfb.c
>> @@ -32,9 +32,7 @@
>> * Category: Display
>> * Description: Tests GETFB and GETFB2 ioctls.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_gem_interop
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -71,7 +69,6 @@
>> * SUBTEST: getfb-reject-ccs
>> * Description: Tests error handling while requesting CCS buffers it
>> should
>> * refuse because getfb supports returning a single
>> buffer handle.
>> - * Functionality: ccs, kms_gem_interop, tiling
>> *
>> * SUBTEST: getfb-%s-different-handles
>> * Description: Tests error handling while requesting for two
>> different handles
>> @@ -86,7 +83,6 @@
>> /**
>> * SUBTEST: getfb2-accept-ccs
>> * Description: Tests outputs are correct when retrieving a CCS
>> framebuffer.
>> - * Functionality: ccs, kms_gem_interop, tiling
>> *
>> * SUBTEST: getfb2-into-addfb2
>> * Description: Output check by passing the output of GETFB2 into
>> ADDFB2.
>> diff --git a/tests/kms_hdmi_inject.c b/tests/kms_hdmi_inject.c
>> index 79dfae40e..625708ddd 100644
>> --- a/tests/kms_hdmi_inject.c
>> +++ b/tests/kms_hdmi_inject.c
>> @@ -30,7 +30,6 @@
>> * the metadata exposed to user space matches.
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "config.h"
>> @@ -46,12 +45,10 @@
>> * SUBTEST: inject-4k
>> * Description: Make sure that 4K modes exposed by DRM match the
>> forced EDID and
>> * modesetting using it succeed.
>> - * Functionality: force_connector, hdmi, edid
>> *
>> * SUBTEST: inject-audio
>> * Description: Make sure that audio information exposed by ALSA
>> match the forced
>> * EDID.
>> - * Functionality: force_connector, hdmi, audio
>> */
>>
>> #define HDISPLAY_4K 3840
>> diff --git a/tests/kms_hdr.c b/tests/kms_hdr.c
>> index c4c9df3fc..33b6c42a6 100644
>> --- a/tests/kms_hdr.c
>> +++ b/tests/kms_hdr.c
>> @@ -26,7 +26,6 @@
>> * Description: Test HDR metadata interfaces and bpc switch
>> * Driver requirement: i915, xe
>> * Mega feature: HDR
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -38,39 +37,30 @@
>> /**
>> * SUBTEST: bpc-switch
>> * Description: Tests switching between different display output bpc
>> modes
>> - * Functionality: colorspace
>> *
>> * SUBTEST: bpc-switch-dpms
>> * Description: Tests switching between different display output bpc
>> modes with dpms
>> - * Functionality: colorspace, dpms
>> *
>> * SUBTEST: bpc-switch-suspend
>> * Description: Tests switching between different display output bpc
>> modes with suspend
>> - * Functionality: colorspace, suspend
>> *
>> * SUBTEST: invalid-hdr
>> * Description: Test to ensure HDR is not enabled on non-HDR panel
>> - * Functionality: colorspace, static_hdr
>> *
>> * SUBTEST: invalid-metadata-sizes
>> * Description: Tests invalid HDR metadata sizes
>> - * Functionality: colorspace, static_hdr
>> *
>> * SUBTEST: static-toggle-dpms
>> * Description: Tests static toggle with dpms
>> - * Functionality: colorspace, dpms, static_hdr
>> *
>> * SUBTEST: static-toggle-suspend
>> * Description: Tests static toggle with suspend
>> - * Functionality: colorspace, static_hdr, suspend
>> *
>> * SUBTEST: brightness-with-hdr
>> * Description: Tests brightness with HDR
>> - * Functionality: colorspace, static_hdr
>> *
>> * SUBTEST: static-%s
>> * Description: Tests %arg[1].
>> - * Functionality: colorspace, static_hdr
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_invalid_mode.c b/tests/kms_invalid_mode.c
>> index c2cc08036..981b6ceb6 100644
>> --- a/tests/kms_invalid_mode.c
>> +++ b/tests/kms_invalid_mode.c
>> @@ -28,9 +28,7 @@
>> * Description: Make sure all modesets are rejected when the
>> requested mode is
>> * invalid
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_lease.c b/tests/kms_lease.c
>> index 0f3a68fed..e217f81d0 100644
>> --- a/tests/kms_lease.c
>> +++ b/tests/kms_lease.c
>> @@ -26,9 +26,7 @@
>> * Category: Display
>> * Description: Test of CreateLease.
>> * Driver requirement: i915, xe
>> - * Functionality: lease
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_multipipe_modeset.c
>> b/tests/kms_multipipe_modeset.c
>> index e67392668..84c2c58f8 100644
>> --- a/tests/kms_multipipe_modeset.c
>> +++ b/tests/kms_multipipe_modeset.c
>> @@ -37,9 +37,7 @@
>> * Description: Verify if simultaneous modesets on all the supported
>> pipes is
>> * successful. Validate using CRC verification
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION("Test simultaneous modeset on all the supported
>> pipes");
>> diff --git a/tests/kms_panel_fitting.c b/tests/kms_panel_fitting.c
>> index d30f7f095..1db7f8e9a 100644
>> --- a/tests/kms_panel_fitting.c
>> +++ b/tests/kms_panel_fitting.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test display panel fitting
>> * Driver requirement: i915, xe
>> - * Functionality: edp, panel_fitting, scaling
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_pipe_crc_basic.c b/tests/kms_pipe_crc_basic.c
>> index 0c19745bc..f1760d577 100644
>> --- a/tests/kms_pipe_crc_basic.c
>> +++ b/tests/kms_pipe_crc_basic.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Tests behaviour of CRC
>> * Driver requirement: i915, xe
>> - * Functionality: crc
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -58,17 +56,14 @@
>> *
>> * SUBTEST: suspend-read-crc
>> * Description: Suspend test for pipe CRC reads
>> - * Functionality: crc, suspend
>> *
>> * SUBTEST: hang-read-crc
>> * Description: Hang test for pipe CRC read
>> - * Functionality: crc, hang
>> */
>>
>> /**
>> * SUBTEST: compare-crc-sanitycheck-%s
>> * Description: Basic sanity check for CRC mismatches with %arg[1]
>> - * Functionality: crc, pixel_formats
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_plane.c b/tests/kms_plane.c
>> index b9bf025bd..d08ec81e4 100644
>> --- a/tests/kms_plane.c
>> +++ b/tests/kms_plane.c
>> @@ -30,7 +30,6 @@
>> * Description: Testes for KMS Plane
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -44,16 +43,13 @@
>> /**
>> * SUBTEST: planar-pixel-format-settings
>> * Description: verify planar settings for pixel format are handled
>> correctly
>> - * Functionality: pixel_formats, plane
>> *
>> * SUBTEST: plane-position-%s
>> * Description: Verify plane position using two planes to create a
>> %arg[1]
>> - * Functionality: plane
>> *
>> * SUBTEST: plane-position-hole-dpms
>> * Description: Verify plane position using two planes to create a
>> partially
>> * covered screen and check for DPMS
>> - * Functionality: dpms, plane
>> *
>> * arg[1]:
>> *
>> @@ -64,12 +60,10 @@
>> /**
>> * SUBTEST: plane-panning-%s
>> * Description: Verify plane panning at %arg[1] using primary plane
>> - * Functionality: plane
>> *
>> * SUBTEST: plane-panning-bottom-right-suspend
>> * Description: Verify plane panning at bottom-right position with
>> suspend using
>> * primary plane
>> - * Functionality: plane, suspend
>> *
>> * arg[1]:
>> *
>> @@ -80,7 +74,6 @@
>> /**
>> * SUBTEST: pixel-%s
>> * Description: verify the pixel formats for given plane and pipe
>> - * Functionality: pixel_formats, plane
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_plane_alpha_blend.c
>> b/tests/kms_plane_alpha_blend.c
>> index eaec37661..047cc57b4 100644
>> --- a/tests/kms_plane_alpha_blend.c
>> +++ b/tests/kms_plane_alpha_blend.c
>> @@ -29,9 +29,7 @@
>> * Category: Display
>> * Description: Test plane alpha and blending mode properties
>> * Driver requirement: i915, xe
>> - * Functionality: plane
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_plane_cursor.c b/tests/kms_plane_cursor.c
>> index 5b3cdc069..fd9e00085 100644
>> --- a/tests/kms_plane_cursor.c
>> +++ b/tests/kms_plane_cursor.c
>> @@ -25,9 +25,7 @@
>> * Category: Display
>> * Description: Tests cursor interactions with primary and overlay
>> planes.
>> * Driver requirement: i915, xe
>> - * Functionality: cursor, plane
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_plane_lowres.c b/tests/kms_plane_lowres.c
>> index ef85e8fb9..4ed098e41 100644
>> --- a/tests/kms_plane_lowres.c
>> +++ b/tests/kms_plane_lowres.c
>> @@ -28,9 +28,7 @@
>> * Description: Test atomic mode setting with a plane by switching
>> between high
>> * and low resolutions
>> * Driver requirement: i915, xe
>> - * Functionality: plane, tiling
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -45,7 +43,6 @@
>> * SUBTEST: tiling-none
>> * Description: Tests the visibility of the planes when switching
>> between high
>> * and low resolution with Linear buffer (no tiling)
>> - * Functionality: plane
>> *
>> * SUBTEST: tiling-%s
>> * Description: Tests the visibility of the planes when switching
>> between high
>> diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
>> index b7922c357..eda300b06 100644
>> --- a/tests/kms_plane_multiple.c
>> +++ b/tests/kms_plane_multiple.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test atomic mode setting with multiple planes.
>> * Driver requirement: i915, xe
>> - * Functionality: plane, tiling
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -45,7 +43,6 @@
>> * Description: Check that the kernel handles atomic updates of
>> multiple planes
>> * correctly by changing their geometry and making sure
>> the changes
>> * are reflected immediately after each commit.
>> - * Functionality: plane
>> *
>> * SUBTEST: tiling-%s
>> * Description: Check that the kernel handles atomic updates of
>> multiple planes
>> diff --git a/tests/kms_plane_scaling.c b/tests/kms_plane_scaling.c
>> index 4e74f0e10..63d35d76b 100644
>> --- a/tests/kms_plane_scaling.c
>> +++ b/tests/kms_plane_scaling.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test display plane scaling
>> * Driver requirement: i915, xe
>> - * Functionality: plane, scaling
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -93,15 +91,12 @@
>> /**
>> * SUBTEST: plane-scaler-unity-scaling-with-pixel-format
>> * Description: Tests scaling with pixel formats, unity scaling.
>> - * Functionality: pixel_formats, plane, scaling
>> *
>> * SUBTEST: plane-scaler-with-clipping-clamping-pixel-formats
>> * Description: Tests scaling with clipping and clamping, pixel formats.
>> - * Functionality: pixel_formats, plane, scaling
>> *
>> * SUBTEST: plane-upscale-%s-with-pixel-format
>> * Description: Tests upscaling with pixel formats %arg[1].
>> - * Functionality: pixel_formats, plane, scaling
>> *
>> * arg[1]:
>> *
>> @@ -112,7 +107,6 @@
>> /**
>> * SUBTEST: plane-downscale-factor-%s-with-pixel-format
>> * Description: Tests downscaling with pixel formats for %arg[1]
>> scaling factor.
>> - * Functionality: pixel_formats, plane, scaling
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_prop_blob.c b/tests/kms_prop_blob.c
>> index 7e7924618..cc43088c2 100644
>> --- a/tests/kms_prop_blob.c
>> +++ b/tests/kms_prop_blob.c
>> @@ -30,9 +30,7 @@
>> * Category: Display
>> * Description: Tests behaviour of mass-data 'blob' properties.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_properties.c b/tests/kms_properties.c
>> index 57f07e699..408e23578 100644
>> --- a/tests/kms_properties.c
>> +++ b/tests/kms_properties.c
>> @@ -26,9 +26,7 @@
>> * Category: Display
>> * Description: Test to validate the properties of all planes, crtc
>> and connectors
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_rotation_crc.c b/tests/kms_rotation_crc.c
>> index 22fb5383b..e18768141 100644
>> --- a/tests/kms_rotation_crc.c
>> +++ b/tests/kms_rotation_crc.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Tests different rotations with different planes &
>> formats
>> * Driver requirement: i915, xe
>> - * Functionality: plane, rotation
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -65,7 +63,6 @@
>> *
>> * SUBTEST: bad-tiling
>> * Description: Checking unsupported tiling for gen9+ with 90 degree
>> of rotation
>> - * Functionality: plane, rotation, tiling
>> *
>> * SUBTEST: exhaust-fences
>> * Description: This test intends to check for fence leaks exhaustively
>> @@ -74,7 +71,6 @@
>> /**
>> * SUBTEST: primary-%s-tiled-reflect-x-%d
>> * Description: Test for %arg[1] & %arg[2] degree rotation on primary
>> plane
>> - * Functionality: plane, rotation, tiling
>> *
>> * arg[1]:
>> *
>> @@ -89,7 +85,6 @@
>> /**
>> * SUBTEST: primary-%s-tiled-reflect-x-%d
>> * Description: Test for %arg[1] & %arg[2] degree rotation on primary
>> plane
>> - * Functionality: plane, rotation, tiling
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_scaling_modes.c b/tests/kms_scaling_modes.c
>> index 4e6a32414..47ed35c7e 100644
>> --- a/tests/kms_scaling_modes.c
>> +++ b/tests/kms_scaling_modes.c
>> @@ -29,9 +29,7 @@
>> * Category: Display
>> * Description: Test display scaling modes
>> * Driver requirement: i915, xe
>> - * Functionality: edp, plane, scaling
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_selftest.c b/tests/kms_selftest.c
>> index 0ecb825db..eb6482cc2 100644
>> --- a/tests/kms_selftest.c
>> +++ b/tests/kms_selftest.c
>> @@ -26,9 +26,7 @@
>> * Category: Display
>> * Description: Basic sanity check of KMS selftests.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_sequence.c b/tests/kms_sequence.c
>> index bf3cdf821..f93724314 100644
>> --- a/tests/kms_sequence.c
>> +++ b/tests/kms_sequence.c
>> @@ -27,9 +27,7 @@
>> * Category: Display
>> * Description: Test CrtcGetSequence and CrtcQueueSequence.
>> * Driver requirement: i915, xe
>> - * Functionality: vblank
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> diff --git a/tests/kms_setmode.c b/tests/kms_setmode.c
>> index d61cfeb9a..484c3a95f 100644
>> --- a/tests/kms_setmode.c
>> +++ b/tests/kms_setmode.c
>> @@ -27,9 +27,7 @@
>> * Description: Tests the mode by iterating through all valid/invalid
>> crtc/connector
>> * combinations
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "config.h"
>> @@ -50,7 +48,6 @@
>> * SUBTEST: basic
>> * Description: Tests the vblank timing by iterating through all
>> valid crtc/connector
>> * combinations
>> - * Functionality: kms_core, vblank
>> *
>> * SUBTEST: basic-clone-single-crtc
>> * Description: Test allows the use of a single CRTC for two
>> connectors, such as VGA/HDMI,
>> diff --git a/tests/kms_sysfs_edid_timing.c
>> b/tests/kms_sysfs_edid_timing.c
>> index 763d36d32..b77ebc3d6 100644
>> --- a/tests/kms_sysfs_edid_timing.c
>> +++ b/tests/kms_sysfs_edid_timing.c
>> @@ -42,9 +42,7 @@
>> * Additionally, make sure that the mean time for all
>> connectors is
>> * not too long.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #define THRESHOLD_PER_CONNECTOR 150
>> diff --git a/tests/kms_tiled_display.c b/tests/kms_tiled_display.c
>> index ce42b890b..1f5331408 100644
>> --- a/tests/kms_tiled_display.c
>> +++ b/tests/kms_tiled_display.c
>> @@ -42,7 +42,6 @@
>> * Description: Test for Transcoder Port Sync for Display Port Tiled
>> Displays
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -55,12 +54,10 @@
>> * SUBTEST: basic-test-pattern
>> * Description: Make sure the Tiled CRTCs are synchronized and we get
>> page flips
>> * for all tiled CRTCs in one vblank (executes on real
>> panel).
>> - * Functionality: tiled_display
>> *
>> * SUBTEST: basic-test-pattern-with-chamelium
>> * Description: Make sure the Tiled CRTCs are synchronized and we get
>> page flips
>> * for all tiled CRTCs in one vblank (executes on
>> chamelium).
>> - * Functionality: chamelium, tiled_display
>> */
>>
>> IGT_TEST_DESCRIPTION("Test for genlocked CRTCs with tiled displays");
>> diff --git a/tests/kms_tv_load_detect.c b/tests/kms_tv_load_detect.c
>> index 9f6f4071e..a6dbb8823 100644
>> --- a/tests/kms_tv_load_detect.c
>> +++ b/tests/kms_tv_load_detect.c
>> @@ -34,9 +34,7 @@
>> * SUBTEST: load-detect
>> * Description: Check tv load detection works correctly.
>> * Driver requirement: i915, xe
>> - * Functionality: obsolete_test
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION("Check tv load detection works correctly.");
>> diff --git a/tests/kms_vblank.c b/tests/kms_vblank.c
>> index c53741b62..b8044ad42 100644
>> --- a/tests/kms_vblank.c
>> +++ b/tests/kms_vblank.c
>> @@ -27,7 +27,6 @@
>> * Description: Test speed of WaitVblank.
>> * Driver requirement: i915, xe
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -48,44 +47,35 @@
>> /**
>> * SUBTEST: crtc-id
>> * Description: Check the vblank and flip events works with given
>> crtc id
>> - * Functionality: vblank
>> *
>> * SUBTEST: invalid
>> * Description: Negative test for vblank request
>> - * Functionality: vblank
>> *
>> * SUBTEST: ts-continuation-dpms-rpm
>> * Description: Test TS continuty with DPMS & RPM while hanging by
>> introducing
>> * NOHANG flag
>> - * Functionality: dpms, hang, rpm, vblank
>> *
>> * SUBTEST: ts-continuation-dpms-suspend
>> * Description: Test TS continuty with DPMS & Suspend while hanging
>> by introducing
>> * NOHANG flag
>> - * Functionality: dpms, hang, suspend, vblank
>> *
>> * SUBTEST: ts-continuation-suspend
>> * Description: Test TS continuty with Suspend while hanging by
>> introducing NOHANG
>> * flag
>> - * Functionality: hang, suspend, vblank
>> *
>> * SUBTEST: ts-continuation-modeset-rpm
>> * Description: Test TS continuty during Modeset with Suspend while
>> hanging by
>> * introducing NOHANG flag
>> - * Functionality: hang, rpm, vblank
>> *
>> * SUBTEST: accuracy-idle
>> * Description: Test Accuracy of vblank events while hanging by
>> introducing NOHANG
>> * flag
>> - * Functionality: hang, vblank
>> *
>> * SUBTEST: %s
>> * Description: Test %arg[1] while hanging by introducing NOHANG flag
>> - * Functionality: hang, vblank
>> *
>> * SUBTEST: %s-hang
>> * Description: Test %arg[1] with injected hang is working properly
>> - * Functionality: hang, vblank
>> *
>> * arg[1]:
>> *
>> diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
>> index e7d2ff1db..c4bb30f6a 100644
>> --- a/tests/kms_vrr.c
>> +++ b/tests/kms_vrr.c
>> @@ -25,9 +25,7 @@
>> * Category: Display
>> * Description: Test to validate diffent features of VRR
>> * Driver requirement: i915, xe
>> - * Functionality: adaptive_sync
>> * Mega feature: Adaptive Sync
>> - * Test category: functionality test
>> */
>>
>> #include "igt.h"
>> @@ -41,7 +39,6 @@
>> * SUBTEST: cmrr
>> * Description: Test to validate the content rate to exactly match
>> with the
>> * requested rate without any frame drops.
>> - * Functionality: CMRR
>> *
>> * SUBTEST: flip-basic
>> * Description: Tests that VRR is enabled and that the difference
>> between flip
>> @@ -54,33 +51,27 @@
>> * SUBTEST: flip-dpms
>> * Description: Tests with DPMS that VRR is enabled and that the
>> difference
>> * between flip timestamps converges to the requested rate.
>> - * Functionality: adaptive_sync, dpms
>> *
>> * SUBTEST: flip-suspend
>> * Description: Tests that VRR is enabled and that the difference
>> between flip
>> * timestamps converges to the requested rate in a
>> suspend test
>> - * Functionality: adaptive_sync, suspend
>> *
>> * SUBTEST: flipline
>> * Description: Make sure that flips happen at flipline decision
>> boundary.
>> *
>> * SUBTEST: seamless-rr-switch-vrr
>> * Description: Test to switch RR seamlessly without modeset.
>> - * Functionality: adaptive_sync, lrr
>> *
>> * SUBTEST: seamless-rr-switch-drrs
>> * Description: Test to switch RR seamlessly without modeset.
>> - * Functionality: adaptive_sync, drrs
>> *
>> * SUBTEST: seamless-rr-switch-virtual
>> * Description: Test to create a Virtual Mode in VRR range and switch
>> to it
>> * without a full modeset.
>> - * Functionality: LRR
>> *
>> * SUBTEST: lobf
>> * Description: Test to validate link-off between active frames in
>> non-psr
>> * operation
>> - * Functionality: LOBF
>> *
>> * SUBTEST: max-min
>> * Description: Oscillates between highest and lowest refresh each
>> frame for
>> diff --git a/tests/kms_writeback.c b/tests/kms_writeback.c
>> index 1775986fe..05680837e 100644
>> --- a/tests/kms_writeback.c
>> +++ b/tests/kms_writeback.c
>> @@ -30,9 +30,7 @@
>> * writeback; it validates bad and good combination,
>> check color
>> * format, and check the output result by using CRC.
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> #include <errno.h>
>> diff --git a/tests/testdisplay.c b/tests/testdisplay.c
>> index e83655fb5..d498eb04c 100644
>> --- a/tests/testdisplay.c
>> +++ b/tests/testdisplay.c
>> @@ -81,9 +81,7 @@
>> * Description: This test is intended for testing of display
>> functionality like
>> * modeset, clone modes, test patterns & pixel
>> generators etc..
>> * Driver requirement: i915, xe
>> - * Functionality: kms_core
>> * Mega feature: General Display Features
>> - * Test category: functionality test
>> */
>>
>> IGT_TEST_DESCRIPTION("Tests basic display functionality.");
>> --
>> 2.25.1
>>
More information about the igt-dev
mailing list