[PATCH i-g-t 5/5] tools/intel_display_bandwidth: Tool for measuring display memory bandwidth utilization
Govindapillai, Vinod
vinod.govindapillai at intel.com
Wed Feb 26 15:39:21 UTC 2025
Hi Ville,
I think you missed one comment from Kamil...
"
+ intel_register_access_init(&mmio_data, intel_get_pci_device(), 0, -1);
This function changed recently and now this code do not compile.
Please fix and resend.
"
The function declaration is like this now..
int intel_register_access_init(struct intel_mmio_data *mmio_data,
struct pci_device *pci_dev, int safe);
BR
Vinod
On Mon, 2024-10-14 at 19:34 +0300, Ville Syrjälä wrote:
> On Fri, Oct 11, 2024 at 07:52:07PM +0200, Kamil Konieczny wrote:
> > Hi Ville,
> > On 2024-09-16 at 23:18:41 +0300, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > >
> > > Introduce a small tool for measing the display enging
> > s/measing/measuring/
> > s/enging/engins/
> >
> > > memory bandwidth utilization. Generally this is available
> > > on SNB+, except on TGL/derivatives where the relevant
> > > registers weren't updated to cope with the new ABOX layout
> > > in the hardware.
> > >
> > > Quite handy for confirming that FBC/CCS/etc. are doing their
> > > job.
> > >
> > > Not 100% sure about the required scaling factor because
> > > bspec claims it's only needed for MTL, but my ADL definitely
> > > needs it already.
> > >
> > > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > ---
> > > lib/intel_reg.h | 5 +
> > > tools/intel_display_bandwidth.c | 171 ++++++++++++++++++++++++++++++++
> >
> > Is this tool display only?
>
> Yes.
>
> > What about bw for opencl computations?
>
> IIRC there may be some kind of total memory bandwidth counter
> exposed via perf. I'm not aware of anything more specific than
> that.
>
> No idea if there's anything for dGPUs, eg. local mem bw, PCIe
> link bw, etc. Would be nice to have I suppose.
>
> It might be intereseting to expose the display bandwidth counter
> via perf as well, but I haven't looked at what that would take
> to implement.
>
> > Could we have more general tool also for compute case? Then it could be
> > named intel_gpu_bandwidth or even shorter intel_gpu_bw?
> >
> > > tools/meson.build | 1 +
> > > 3 files changed, 177 insertions(+)
> > > create mode 100644 tools/intel_display_bandwidth.c
> > >
> > > diff --git a/lib/intel_reg.h b/lib/intel_reg.h
> > > index 26833c66f8e7..5e049d8b14d6 100644
> > > --- a/lib/intel_reg.h
> > > +++ b/lib/intel_reg.h
> > > @@ -1413,6 +1413,11 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
> > > #define PCH_3DRAMCGDIS0 0x46028
> > > #define SOUTH_DSPCLK_GATE_D 0xc2020
> > >
> > > +#define DE_POWER1 0x42400
> > > +#define DE_POWER2 0x42404
> > > +#define DE_POWER2_ABOX0 0x42404
> > > +#define DE_POWER2_ABOX1 0x42408
> > > +
> > > #define CPU_eDP_A 0x64000
> > > #define PCH_DP_B 0xe4100
> > > #define PCH_DP_C 0xe4200
> > > diff --git a/tools/intel_display_bandwidth.c b/tools/intel_display_bandwidth.c
> > > new file mode 100644
> > > index 000000000000..c7be3c390d08
> > > --- /dev/null
> > > +++ b/tools/intel_display_bandwidth.c
> > > @@ -0,0 +1,171 @@
> > > +// SPDX-License-Identifier: MIT
> > > +/*
> > > + * Copyright © 2024 Intel Corporation
> > > + */
> > > +
> > > +#include <getopt.h>
> > > +#include <inttypes.h>
> > > +#include <stdbool.h>
> > > +#include <stdio.h>
> > > +#include <stdlib.h>
> > > +#include <unistd.h>
> > > +
> > > +#include "intel_io.h"
> > > +#include "intel_chipset.h"
> > > +#include "intel_reg.h"
> > > +
> > > +static bool has_de_power2(uint32_t devid)
> > > +{
> > > + /*
> > > + * TGL has DE_POWER2 but it measures the low priority traffic
> > > + * on ABOX, not not actual display traffic on ABOX0/ABOX1.
> >
> > s/not not/not/
> >
> > > + */
> > > + if (intel_display_ver(devid) == 12)
> > > + return false;
> > > +
> > > + return intel_display_ver(devid) >= 6 &&
> > > + !IS_VALLEYVIEW(devid) && !IS_CHERRYVIEW(devid);
> > > +}
> > > +
> > > +static bool has_de_power2_abox0_abox1(uint32_t devid)
> > > +{
> > > + /*
> > > + * Despite having ABOX0/ABOX1 TGL lacks the
> > > + * accompanying DE_POWER2_ABOX* registers.
> > > + */
> > > + return intel_display_ver(devid) >= 13;
> > > +}
> > > +
> > > +static int de_power2_scale(uint32_t devid)
> > > +{
> > > + /*
> > > + * FIXME should perhaps use something like
> > > + * is_intel_dgfx() but that one wants to open the device :(
> > > + */
> > > + switch (intel_display_ver(devid)) {
> > > + case 13:
> > > + return IS_DG2(devid) ? 1 : 2;
> > > + case 14:
> > > + return IS_BATTLEMAGE(devid) ? 1 : 2;
> > > + default:
> > > + return 1;
> > > + }
> > > +}
> > > +
> > > +static int de_power2_unit(uint32_t devid)
> > > +{
> > > + return 64 * de_power2_scale(devid);
> > > +}
> > > +
> > > +static float bandwidth(uint32_t devid, int duration,
> > > + uint32_t pre, uint32_t post)
> > > +{
> > > + return (float)(post - pre) * de_power2_unit(devid) / (duration << 20);
> > > +}
> > > +
> > > +static void measure_de_power2_abox0_abox1(uint32_t devid, unsigned int sleep_duration)
> > > +{
> > > + uint32_t pre_abox0, post_abox0;
> > > + uint32_t pre_abox1, post_abox1;
> > > +
> > > + pre_abox0 = INREG(DE_POWER2_ABOX0);
> > > + pre_abox1 = INREG(DE_POWER2_ABOX1);
> > > +
> > > + if (sleep_duration) {
> > > + sleep(sleep_duration);
> > > +
> > > + post_abox0 = INREG(DE_POWER2_ABOX0);
> > > + post_abox1 = INREG(DE_POWER2_ABOX1);
> > > +
> > > + printf("DE_POWER2_ABOX0: 0x%08x->0x%08x\n",
> > > + pre_abox0, post_abox0);
> > > + printf("DE_POWER2_ABOX1: 0x%08x->0x%08x\n",
> > > + pre_abox1, post_abox1);
> > > +
> > > + printf("ABOX0 bandwidth: %.2f MiB/s\n",
> > > + bandwidth(devid, sleep_duration,
> > > + pre_abox0, post_abox0));
> > > + printf("ABOX1 bandwidth: %.2f MiB/s\n",
> > > + bandwidth(devid, sleep_duration,
> > > + pre_abox1, post_abox1));
> > > + printf("Total bandwidth: %.2f MiB/s\n",
> > > + bandwidth(devid, sleep_duration,
> > > + pre_abox0 + pre_abox1, post_abox0 + post_abox1));
> > > + } else {
> > > + printf("DE_POWER2_ABOX0: 0x%08x\n", pre_abox0);
> > > + printf("DE_POWER2_ABOX1: 0x%08x\n", pre_abox1);
> > > + }
> > > +}
> > > +
> > > +static void measure_de_power2(uint32_t devid, unsigned int sleep_duration)
> > > +{
> > > + uint32_t pre, post;
> > > +
> > > + pre = INREG(DE_POWER2);
> > > +
> > > + if (sleep_duration) {
> > > + sleep(sleep_duration);
> > > +
> > > + post = INREG(DE_POWER2);
> > > +
> > > + printf("DE_POWER2: 0x%08x->0x%08x\n", pre, post);
> > > +
> > > + printf("Total bandwidth: %.2f MiB/s\n",
> > > + bandwidth(devid, sleep_duration, pre, post));
> > > + } else {
> > > + printf("DE_POWER2: 0x%08x\n", pre);
> > > + }
> > > +}
> > > +
> > > +static void __attribute__((noreturn)) usage(const char *name)
> > > +{
> > > + fprintf(stderr, "Usage: %s [options]\n"
> > > + " -s,--sleep <seconds>\n",
> >
> > Could you also add counter -c and repeat measurement N times
> > between sleeps?
>
> Seems a bit pointless when you can just run the tool
> in a loop.
>
> >
> > > + name);
> > > + exit(1);
> > > +}
> > > +
> > > +int main(int argc, char *argv[])
> > > +{
> > > + struct intel_mmio_data mmio_data;
> > > + unsigned int sleep_duration = 0;
> > > + uint32_t devid;
> > > +
> > > + for (;;) {
> > > + static const struct option long_options[] = {
> > > + { .name = "sleep", .has_arg = required_argument, },
> > > + {}
> > > + };
> > > +
> > > + int opt = getopt_long(argc, argv, "s:", long_options, NULL);
> > > + if (opt == -1)
> > > + break;
> > > +
> > > + switch (opt) {
> > > + case 's':
> > > + sleep_duration = atoi(optarg);
> > > + break;
> > > + default:
> > > + usage(argv[0]);
> > > + break;
> > > + }
> > > + }
> > > +
> > > + devid = intel_get_pci_device()->device_id;
> > > +
> > > + if (!has_de_power2(devid)) {
> > > + fprintf(stderr, "Display bandwidth counter not available\n");
> > > + return 2;
> > > + }
> > > +
> > > + intel_register_access_init(&mmio_data, intel_get_pci_device(), 0, -1);
> >
> > This function changed recently and now this code do not compile.
> > Please fix and resend.
> >
> > Regards,
> > Kamil
> >
> > > +
> > > + if (has_de_power2_abox0_abox1(devid))
> > > + measure_de_power2_abox0_abox1(devid, sleep_duration);
> > > + else
> > > + measure_de_power2(devid, sleep_duration);
> > > +
> > > + intel_register_access_fini(&mmio_data);
> > > +
> > > + return 0;
> > > +}
> > > diff --git a/tools/meson.build b/tools/meson.build
> > > index 48c9a4b5089e..4e9100ddb2b7 100644
> > > --- a/tools/meson.build
> > > +++ b/tools/meson.build
> > > @@ -16,6 +16,7 @@ tools_progs = [
> > > 'intel_audio_dump',
> > > 'intel_backlight',
> > > 'intel_bios_dumper',
> > > + 'intel_display_bandwidth',
> > > 'intel_display_crc',
> > > 'intel_display_poller',
> > > 'intel_dump_decode',
> > > --
> > > 2.44.2
> > >
>
More information about the igt-dev
mailing list