[PATCH i-g-t v2] tests/intel/xe_pm: Introduce i2c subtests

[Gupta, Anshuman]

> -----Original Message-----
> From: Jadav, Raag <raag.jadav at intel.com>
> Sent: Tuesday, July 22, 2025 9:36 AM
> To: Heikki Krogerus <heikki.krogerus at linux.intel.com>
> Cc: De Marchi, Lucas <lucas.demarchi at intel.com>; Vivi, Rodrigo
> <rodrigo.vivi at intel.com>; igt-dev at lists.freedesktop.org; Gupta, Anshuman
> <anshuman.gupta at intel.com>; Nilawar, Badal <badal.nilawar at intel.com>;
> Tauro, Riana <riana.tauro at intel.com>
> Subject: Re: [PATCH i-g-t v2] tests/intel/xe_pm: Introduce i2c subtests
> 
> On Mon, Jul 21, 2025 at 01:36:32PM +0300, Heikki Krogerus wrote:
> > On Sat, Jul 19, 2025 at 10:01:01PM +0530, Raag Jadav wrote:
> > > Introduce subtests for i2c adapter which is used to control on-board
> > > OEM sensors on selected devices. This will test D3hot/D3cold
> > > transition after i2c adapter access for the devices that support it.
> > >
> > > v2: Define macros for AMC constants (Lucas)
> > >     s/index/adapter (Lucas)
> > >
> > > Signed-off-by: Raag Jadav <raag.jadav at intel.com>
> >
> > Looks good to me. FWIW:
> >
> > Reviewed-by: Heikki Krogerus <heikki.krogerus at linux.intel.com>
> 
> Thanks Heikki.
> 
> The BAT failures seems unrelated to the patch. So anything I can do to move
> this forward?
> 
> Raag
> 
> > > ---
> > >  tests/intel/xe_pm.c | 98
> > > +++++++++++++++++++++++++++++++++++++++++++++
> > >  1 file changed, 98 insertions(+)
> > >
> > > diff --git a/tests/intel/xe_pm.c b/tests/intel/xe_pm.c index
> > > 16b5fc686..ca935d518 100644
> > > --- a/tests/intel/xe_pm.c
> > > +++ b/tests/intel/xe_pm.c
> > > @@ -11,12 +11,18 @@
> > >   * Test category: functionality test
> > >   */
> > >
> > > +#include <dirent.h>
> > >  #include <limits.h>
> > >  #include <fcntl.h>
> > >  #include <string.h>
> > > +#include <sys/ioctl.h>
> > > +
> > > +#include <linux/i2c-dev.h>
> > > +#include <linux/i2c.h>
> > >
> > >  #include "igt.h"
> > >  #include "lib/igt_device.h"
> > > +#include "lib/igt_kmod.h"
> > >  #include "lib/igt_pm.h"
> > >  #include "lib/igt_sysfs.h"
> > >  #include "lib/igt_syncobj.h"
> > > @@ -38,6 +44,10 @@
> > >  #define PREFETCH (0x1 << 1)
> > >  #define UNBIND_ALL (0x1 << 2)
> > >
> > > +/* AMC slave details */
> > > +#define I2C_AMC_ADDR	0x40
> > > +#define I2C_AMC_REG	0x00
> > > +
> > >  enum mem_op {
> > >  	READ,
> > >  	WRITE,
> > > @@ -779,6 +789,87 @@ static void test_mocs_suspend_resume(device_t
> device, enum igt_suspend_state s_s
> > >  	}
> > >  }
> > >
> > > +static int find_i2c_adapter(device_t device, int sysfs_fd) {
> > > +	int adapter_fd, i2c_adapter = -1;
> > > +	struct dirent *dirent;
> > > +	char adapter[32];
> > > +	DIR *dir;
> > > +
> > > +	/* Make sure the /dev/i2c-* files exist */
> > > +	igt_require(igt_kmod_load("i2c-dev", NULL) == 0);
> > > +
> > > +	snprintf(adapter, sizeof(adapter), "%s.%hu", "device/i2c_designware",
> > > +		 (device.pci_xe->bus << 8) | (device.pci_xe->dev));
> > > +	adapter_fd = openat(sysfs_fd, adapter, O_RDONLY);
> > > +	igt_require_fd(adapter_fd);
> > > +
> > > +	dir = fdopendir(adapter_fd);
> > > +	igt_assert(dir);
> > > +
> > > +	/* Find the i2c adapter */
> > > +	while ((dirent = readdir(dir))) {
> > > +		if (strncmp(dirent->d_name, "i2c-", 4) == 0) {
> > > +			sscanf(dirent->d_name, "i2c-%d", &i2c_adapter);
> > > +			break;
> > > +		}
> > > +	}
> > > +
> > > +	closedir(dir);
> > > +	close(adapter_fd);
> > > +	return i2c_adapter;
> > > +}
> > > +
> > > +/**
> > > + * SUBTEST: %s-i2c
> > > + * Description:
> > > + * 	Validate whether the device is able to suspend after i2c adapter
> access.
> > > + * Functionality: pm-d3
> > > + * GPU requirements: D3 feature should be supported
> > > + *
> > > + * arg[1]:
> > > + *
> > > + * @d3hot:	d3hot
> > > + * @d3cold:	d3cold
> > > + */
> > > +static bool i2c_test(device_t device, int sysfs_fd) {
> > > +	uint8_t addr = I2C_AMC_ADDR, reg = I2C_AMC_REG, buf;
> > > +	int i2c_adapter, i2c_fd;
> > > +	char i2c_dev[16];
> > > +	struct i2c_msg msgs[] = {
> > > +		{
> > > +			.addr = addr,
> > > +			.flags = 0,
> > > +			.len = sizeof(reg),
> > > +			.buf = &reg,
> > > +		}, {
> > > +			.addr = addr,
> > > +			.flags = I2C_M_RD,
> > > +			.len = sizeof(buf),
> > > +			.buf = &buf,
> > > +		}
> > > +	};
> > > +	struct i2c_rdwr_ioctl_data msgset = {
> > > +		.msgs = msgs,
> > > +		.nmsgs = ARRAY_SIZE(msgs),
> > > +	};
> > > +
> > > +	i2c_adapter = find_i2c_adapter(device, sysfs_fd);
> > > +	igt_assert_lte(0, i2c_adapter);
> > > +
> > > +	snprintf(i2c_dev, sizeof(i2c_dev), "/dev/i2c-%hd", i2c_adapter);
> > > +	i2c_fd = open(i2c_dev, O_RDWR);
> > > +	igt_assert_fd(i2c_fd);
Can you wait for runtime suspend before triggering the transaction to test gfx transition from d3 to d0?
Thanks,
Anshuman
> > > +
> > > +	/* Perform an i2c transaction to trigger adapter wake */
> > > +	igt_info("Accessing slave 0x%hhx on %s\n", addr, i2c_dev);
> > > +	igt_assert_lte(0, igt_ioctl(i2c_fd, I2C_RDWR, &msgset));
> > > +
> > > +	close(i2c_fd);
> > > +	return true;
> > > +}
> > > +
> > >  igt_main
> > >  {
> > >  	device_t device;
> > > @@ -889,6 +980,13 @@ igt_main
> > >  			cleanup_d3(device);
> > >  		}
> > >
> > > +		igt_subtest_f("%s-i2c", d->name) {
> > > +			igt_assert(setup_d3(device, d->state));
> > > +			igt_assert(i2c_test(device, sysfs_fd));
> > > +			igt_assert(in_d3(device, d->state));
> > > +			cleanup_d3(device);
> > > +		}
> > > +
> > >  		igt_subtest_f("%s-multiple-execs", d->name) {
> > >  			igt_assert(setup_d3(device, d->state));
> > >  			test_exec(device, 16, 32, NO_SUSPEND, d->state, 0);
> > > --
> > > 2.34.1
> >
> > --
> > heikki