[PATCH i-g-t v4] tests/kms_plane: Add test to validate odd panning

[Nemesa Garg]

This feature creates a NV12 plane having two framebuffers
and moving it to odd position and then do continous flip
along with the change in the width of framebuffer.
This is to check whether panning at odd position is
supported or not.

v2: Add test in kms_plane.[Swati]
v3: Remove extra parameters[Pranay]
v4: Add a break condition in loop

Signed-off-by: Nemesa Garg <nemesa.garg at intel.com>
---
 tests/kms_plane.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/tests/kms_plane.c b/tests/kms_plane.c
index b9bf025bd..e4555e932 100644
--- a/tests/kms_plane.c
+++ b/tests/kms_plane.c
@@ -88,6 +88,15 @@
  * @format-source-clamping:          with source clamping
  */
 
+/**
+ * SUBTEST: odd-panning
+ * Description: Verify that odd panning in horizontal direction for planar format
+ * Driver requirement: i915, xe
+ * Functionality: plane, panning
+ * Mega feature: General Display Features
+ * Test category: functionality test
+ */
+
 /*
  * Throw away enough lsbs in pixel formats tests
  * to get a match despite some differences between
@@ -100,6 +109,9 @@
 #define CRTC_RESTRICT_CNT	2
 #define SIM_CRTC_RESTRICT_CNT	1
 
+#define PLANE_WIDTH 810
+#define PLANE_HEIGHT 590
+
 typedef struct {
 	float red;
 	float green;
@@ -1330,6 +1342,89 @@ static bool is_pipe_limit_reached(int count)
 		return count >= CRTC_RESTRICT_CNT && !all_pipes;
 }
 
+static void
+prepare_planes_panning(igt_display_t *display, const enum pipe pipe_id,
+	       igt_output_t *output)
+{
+	igt_plane_t *primary;
+	struct igt_fb primary_fb_1, primary_fb_2;
+	unsigned int fb_id_1, fb_id_2;
+	int j = 0, ret;
+
+	igt_output_set_pipe(output, pipe_id);
+
+	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+	fb_id_1 = igt_create_pattern_fb(display->drm_fd,
+					800, 590,
+					DRM_FORMAT_NV12,
+					DRM_FORMAT_MOD_LINEAR,
+					&primary_fb_1);
+
+	fb_id_2 = igt_create_pattern_fb(display->drm_fd,
+					800, 590,
+					DRM_FORMAT_NV12,
+					DRM_FORMAT_MOD_LINEAR,
+					&primary_fb_2);
+
+	igt_assert(fb_id_1);
+	igt_assert(fb_id_2);
+
+	igt_plane_set_fb(primary, &primary_fb_1);
+
+	igt_plane_set_size(primary, PLANE_WIDTH, PLANE_HEIGHT);
+	igt_plane_set_position(primary, -501, 200);
+
+	ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+
+	do {
+		if (j % 2 == 0) {
+			igt_plane_set_fb(primary, &primary_fb_1);
+			igt_plane_set_size(primary, PLANE_WIDTH - j, PLANE_HEIGHT);
+			ret = igt_display_try_commit_atomic(display, 0, NULL);
+			if (ret == -22)
+				break;
+		} else {
+			igt_plane_set_fb(primary, &primary_fb_2);
+			igt_plane_set_size(primary, PLANE_WIDTH - j, PLANE_HEIGHT);
+			ret = igt_display_try_commit_atomic(display, 0, NULL);
+			if (ret == -22)
+				break;
+		}
+		j++;
+	} while (j < 20);
+
+	igt_assert_eq(ret, -22);
+
+	igt_plane_set_fb(primary, NULL);
+	igt_output_set_pipe(output, PIPE_NONE);
+	igt_display_try_commit2(display, COMMIT_ATOMIC);
+
+	igt_remove_fb(display->drm_fd, &primary_fb_1);
+	igt_remove_fb(display->drm_fd, &primary_fb_2);
+}
+
+static void run_test_odd_pan(data_t *data)
+{
+	igt_display_t *display = &data->display;
+	enum pipe pipe;
+	igt_output_t *output;
+
+	for_each_pipe_with_valid_output(display, pipe, output) {
+		igt_display_reset(display);
+
+		igt_output_set_pipe(output, pipe);
+		if (!intel_pipe_output_combo_valid(display))
+			continue;
+
+		igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output))
+			prepare_planes_panning(display, pipe, output);
+
+		if (pipe == 0)
+			break;
+	}
+}
+
 static void run_test(data_t *data, void (*test)(data_t *, enum pipe))
 {
 	enum pipe pipe;
@@ -1408,6 +1503,10 @@ run_tests_for_pipe_plane(data_t *data)
 		run_test(data, dynamic_test_handler);
 	}
 
+	igt_describe("verify whether odd panning is supported or not");
+	igt_subtest_with_dynamic("odd-panning")
+		run_test_odd_pan(data);
+
 	igt_describe("verify planar settings for pixel format are accepted or rejected correctly");
 	igt_subtest_f("planar-pixel-format-settings")
 		test_planar_settings(data);
-- 
2.34.1