[PATCH i-g-t 2/3] tests/chamelium/kms_chamelium_color: Fix ctm-limited-range subtest

[Sharma, Swati2]

On 27-03-2025 10:57 am, Borah, Chaitanya Kumar wrote:
>
>> -----Original Message-----
>> From: igt-dev <igt-dev-bounces at lists.freedesktop.org> On Behalf Of Swati
>> Sharma
>> Sent: Monday, March 24, 2025 2:40 PM
>> To: igt-dev at lists.freedesktop.org
>> Cc: Sharma, Swati2 <swati2.sharma at intel.com>
>> Subject: [PATCH i-g-t 2/3] tests/chamelium/kms_chamelium_color: Fix ctm-
>> limited-range subtest
>>
>> Test is fixed, now we take chamelium capture after setting output to full and
>> limited range and then compare frame dumps.
> We should add some details on the steps we are taking during the test.
Sure, will add in next rev.
>> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
>> ---
>>   tests/chamelium/kms_chamelium_color.c | 50 +++++++++++++++------------
>>   1 file changed, 27 insertions(+), 23 deletions(-)
>>
>> diff --git a/tests/chamelium/kms_chamelium_color.c
>> b/tests/chamelium/kms_chamelium_color.c
>> index 68611ec6a..355047ed6 100644
>> --- a/tests/chamelium/kms_chamelium_color.c
>> +++ b/tests/chamelium/kms_chamelium_color.c
>> @@ -352,9 +352,10 @@ static bool test_pipe_limited_range_ctm(data_t
>> *data,
>>   	gamma_lut_t *degamma_linear, *gamma_linear;
>>   	igt_output_t *output = data->output;
>>   	drmModeModeInfo *mode = data->mode;
>> -	struct igt_fb fb_modeset, fb, fbref;
>> -	struct chamelium_frame_dump *frame_limited;
>> -	int fb_id, fb_modeset_id, fbref_id;
>> +	struct igt_fb fb_modeset, fb;
>> +	struct mechamelium_fra_dump *frame_limited, *frame_full;
>> +	int fb_id, fb_modeset_id;
>> +	igt_crc_t *reference_crc;
>>   	bool ret = false;
>>
>>   	igt_require(igt_pipe_obj_has_prop(primary->pipe, IGT_CRTC_CTM));
>> @@ -380,21 +381,13 @@ static bool test_pipe_limited_range_ctm(data_t
>> *data,
>>   				      DRM_FORMAT_MOD_LINEAR,
>>   				      &fb_modeset);
> We don't seem to use/commit this frame buffer at all.
hmm, can be removed.
>>   	igt_assert(fb_modeset_id);
>> -
>> -	fbref_id = igt_create_fb(data->drm_fd,
>> -				 mode->hdisplay,
>> -				 mode->vdisplay,
>> -				 DRM_FORMAT_XRGB8888,
>> -				 DRM_FORMAT_MOD_LINEAR,
>> -				 &fbref);
>> -	igt_assert(fbref_id);
>> -
>>   	igt_plane_set_fb(primary, &fb_modeset);
>>
>>   	set_degamma(data, primary->pipe, degamma_linear);
>>   	set_gamma(data, primary->pipe, gamma_linear);
>>   	set_ctm(primary->pipe, ctm);
>>
>> +	/* Set the output into full range. */
>>   	igt_output_set_prop_value(output,
>>   				  IGT_CONNECTOR_BROADCAST_RGB,
>>   				  BROADCAST_RGB_FULL);
>> @@ -402,11 +395,28 @@ static bool test_pipe_limited_range_ctm(data_t
>> *data,
>>   	igt_plane_set_fb(primary, &fb);
>>   	igt_display_commit(&data->display);
>>
>> +	chamelium_capture(data->chamelium, port, 0, 0, 0, 0, 1);
>> +	frame_full =
>> +		chamelium_read_captured_frame(data->chamelium, 0);
>> +
>> +	/* Chamelium calculates the CRC for the most recent
>> +	 * captured frame; that's why CRC of the reference frame
>> +	 * is captured here.
>> +	 */
>> +	reference_crc = chamelium_get_crc_for_area(data->chamelium, port,
>> 0, 0, 0, 0);
>> +	igt_assert(reference_crc);
>> +
>>   	/* Set the output into limited range. */
>>   	igt_output_set_prop_value(output,
>>   				  IGT_CONNECTOR_BROADCAST_RGB,
>>   				  BROADCAST_RGB_16_235);
>>   	paint_rectangles(data, mode, red_green_blue_full, &fb);
>> +	igt_plane_set_fb(primary, &fb);
>> +	igt_display_commit(&data->display);
>> +
>> +	chamelium_capture(data->chamelium, port, 0, 0, 0, 0, 1);
>> +	frame_limited =
>> +		chamelium_read_captured_frame(data->chamelium, 0);
> I hope chamelium takes care that it doesn't retrieve the frame captured using the earlier chamelium_capture()
Yes, chamelium capture() api discards previous capture and capture new 
frame.
>
> Regards
>
> Chaitanya
>
>
>>   	/* And reset.. */
>>   	igt_output_set_prop_value(output,
>> @@ -414,18 +424,12 @@ static bool test_pipe_limited_range_ctm(data_t
>> *data,
>>   				  BROADCAST_RGB_FULL);
>>   	igt_plane_set_fb(primary, NULL);
>>   	igt_output_set_pipe(output, PIPE_NONE);
>> -	chamelium_capture(data->chamelium, port, 0, 0, 0, 0, 1);
>> -	frame_limited =
>> -		chamelium_read_captured_frame(data->chamelium, 0);
>> -
>>
>> -	/* Verify that the framebuffer reference of the software
>> -	 * computed output is equal to the frame dump of the CTM
>> -	 * matrix transformation output.
>> -	 */
>> -	ret = chamelium_frame_match_or_dump(data->chamelium, port,
>> -					    frame_limited, &fbref,
>> -					    CHAMELIUM_CHECK_ANALOG);
>> +	/* Verify frame dumps are equal. */
>> +	ret = chamelium_frame_match_or_dump_frame_pair(data-
>>> chamelium, port,
>> +						       frame_full, frame_limited,
>> +						       reference_crc,
>> +
>> CHAMELIUM_CHECK_ANALOG);
>>
>>   	free_lut(gamma_linear);
>>   	free_lut(degamma_linear);
>> --
>> 2.25.1