[Bug 67191] intelfb does not stay up at boot time.
bugzilla-daemon at bugzilla.kernel.org
bugzilla-daemon at bugzilla.kernel.org
Sat Dec 21 03:36:19 PST 2013
https://bugzilla.kernel.org/show_bug.cgi?id=67191
--- Comment #13 from Bob Raitz <pappy_mcfae at yahoo.com> ---
Okay. This first dmesg is from 3.11.10. I'll reboot, and then send the 3.12.2
dmesg.
______________________________________
[ 0.000000] Linux version 3.11.10 (root at pappy-lap) (gcc version 4.7.3
(Gentoo 4.7.3 p1.2, pie-0.5.5) ) #1 PREEMPT Thu Dec 12 01:57:53 PST 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f67ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f680000-0x000000007f6fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled:
non-PAE kernel!
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Hewlett-Packard Presario C500 (RQ334UA#ABA) /30C6,
BIOS F.24 04/25/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f680 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x0181c000, 0x0181cfff] PGTABLE
[ 0.000000] ACPI: RSDP 000f6510 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 7f68cbda 0004C (v01 HPQOEM SLIC-MPC 06040000 LTP
00000000)
[ 0.000000] ACPI: FACP 7f693c86 00074 (v01 HP NISSAN 06040000 LOHR
0000005A)
[ 0.000000] ACPI: DSDT 7f68d506 06780 (v01 HP NISSAN 06040000 INTL
20060608)
[ 0.000000] ACPI: FACS 7f694fc0 00040
[ 0.000000] ACPI: APIC 7f693cfa 00068 (v01 HP NISSAN 06040000 LOHR
0000005A)
[ 0.000000] ACPI: HPET 7f693d62 00038 (v01 HP NISSAN 06040000 LOHR
0000005A)
[ 0.000000] ACPI: MCFG 7f693d9a 0003C (v01 HP NISSAN 06040000 LOHR
0000005A)
[ 0.000000] ACPI: BOOT 7f693fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP
00000001)
[ 0.000000] ACPI: SLIC 7f693e08 00176 (v01 HPQOEM SLIC-MPC 06040000 LOHR
00000000)
[ 0.000000] ACPI: APIC 7f693f7e 0005A (v01 PTLTD ? APIC 06040000 LTP
00000000)
[ 0.000000] ACPI: SSDT 7f68d2f8 0020A (v01 SataRe SataAhci 00001000 INTL
20060217)
[ 0.000000] ACPI: SSDT 7f68d11c 001DC (v01 PmRef Cpu0Cst 00003001 INTL
20060217)
[ 0.000000] ACPI: SSDT 7f68cc26 004F6 (v01 PmRef CpuPm 00003000 INTL
20060217)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify
linux-acpi at vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0181d000, 0x0181dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7f67ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7f67ffff]
[ 0.000000] On node 0 totalpages: 521758
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 519982
[ 0.000000] Kernel command line: BOOT_IMAGE=3.11.10 ro root=802
i915.modeset=1 acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f680)
[ 0.000000] Memory: 2061396K/2087032K available (5309K kernel code, 312K
rwdata, 1864K rodata, 336K init, 440K bss, 25636K reserved, 1178120K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1752000 - 0xc17a6000 ( 336 kB)
.data : 0xc152f7b6 - 0xc1751200 (2182 kB)
.text : 0xc1000000 - 0xc152f7b6 (5309 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1861.959 MHz processor
[ 0.001002] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3723.91 BogoMIPS (lpj=1861959)
[ 0.001142] pid_max: default: 32768 minimum: 301
[ 0.001254] Mount-cache hash table entries: 512
[ 0.001541] Disabled fast string operations
[ 0.001618] mce: CPU supports 6 MCE banks
[ 0.001694] CPU0: Thermal monitoring handled by SMI
[ 0.001711] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift: 6
[ 0.002004] CPU: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz (fam: 06,
model: 0e, stepping: 0c)
[ 0.002204] ACPI: Core revision 20130517
[ 0.005023] ACPI: All ACPI Tables successfully acquired
[ 0.007073] Performance Events: Core events, core PMU driver.
[ 0.007170] ... version: 1
[ 0.007237] ... bit width: 40
[ 0.007304] ... generic registers: 2
[ 0.007371] ... value mask: 000000ffffffffff
[ 0.007441] ... max period: 000000007fffffff
[ 0.007511] ... fixed-purpose events: 0
[ 0.007576] ... event mask: 0000000000000003
[ 0.007821] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.008361] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019000] devtmpfs: initialized
[ 0.019000] NET: Registered protocol family 16
[ 0.019000] kworker/u2:0 (17) used greatest stack depth: 7536 bytes left
[ 0.019014] kworker/u2:0 (21) used greatest stack depth: 7232 bytes left
[ 0.019313] ACPI: bus type PCI registered
[ 0.019472] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.019602] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.019677] PCI: Using MMCONFIG for extended config space
[ 0.019747] PCI: Using configuration type 1 for base access
[ 0.020180] kworker/u2:0 (36) used greatest stack depth: 7088 bytes left
[ 0.027298] bio: create slab <bio-0> at 0
[ 0.027510] ACPI: Added _OSI(Module Device)
[ 0.027580] ACPI: Added _OSI(Processor Device)
[ 0.027648] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.027718] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.028605] ACPI: EC: Look up EC in DSDT
[ 0.030478] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.031312] ACPI: Interpreter enabled
[ 0.031384] ACPI: (supports S0 S5)
[ 0.031450] ACPI: Using IOAPIC for interrupt routing
[ 0.031579] PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
[ 0.109156] ACPI: EC: GPE storm detected(10 GPEs), transactions will use
polling mode
[ 0.128318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.128398] acpi PNP0A08:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 0.128524] acpi PNP0A08:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 0.129216] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
(ignored)
[ 0.129220] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff]
(ignored)
[ 0.129223] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
(ignored)
[ 0.129226] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
(ignored)
[ 0.129229] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
(ignored)
[ 0.129232] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
(ignored)
[ 0.129235] acpi PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
(ignored)
[ 0.129239] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
(ignored)
[ 0.129242] PCI: root bus 00: using default resources
[ 0.129294] PCI host bridge to bus 0000:00
[ 0.129366] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.129438] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.129511] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.129596] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.129723] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.129737] pci 0000:00:02.0: reg 0x10: [mem 0xd0200000-0xd027ffff]
[ 0.129744] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.129752] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.129759] pci 0000:00:02.0: reg 0x1c: [mem 0xd0300000-0xd033ffff]
[ 0.129868] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.129879] pci 0000:00:02.1: reg 0x10: [mem 0xd0280000-0xd02fffff]
[ 0.130052] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.130076] pci 0000:00:1b.0: reg 0x10: [mem 0xd0340000-0xd0343fff 64bit]
[ 0.130179] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.130282] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.130391] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.130493] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.130601] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.130703] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.130759] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.130865] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.130922] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.131052] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.131108] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.131232] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.131256] pci 0000:00:1d.7: reg 0x10: [mem 0xd0544000-0xd05443ff]
[ 0.131362] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.131454] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.131615] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.131729] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f]
conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.131872] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6
GPIO
[ 0.132090] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.132108] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.132121] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.132133] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.132145] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.132158] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 0.132273] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.132297] pci 0000:00:1f.2: reg 0x10: [io 0x18b0-0x18b7]
[ 0.132310] pci 0000:00:1f.2: reg 0x14: [io 0x18a4-0x18a7]
[ 0.132322] pci 0000:00:1f.2: reg 0x18: [io 0x18a8-0x18af]
[ 0.132335] pci 0000:00:1f.2: reg 0x1c: [io 0x18a0-0x18a3]
[ 0.132347] pci 0000:00:1f.2: reg 0x20: [io 0x1890-0x189f]
[ 0.132360] pci 0000:00:1f.2: reg 0x24: [mem 0xd0544400-0xd05447ff]
[ 0.132417] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.132506] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.132579] pci 0000:00:1f.3: reg 0x20: [io 0x18c0-0x18df]
[ 0.132785] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.132860] pci 0000:00:1c.0: bridge window [io 0x0000-0x0fff]
[ 0.132866] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.133052] pci 0000:06:00.0: [14e4:4311] type 00 class 0x028000
[ 0.133120] pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xd0003fff]
[ 0.133605] pci 0000:06:00.0: supports D1 D2
[ 0.133713] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.133867] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.133940] pci 0000:00:1c.2: bridge window [io 0x0000-0x0fff]
[ 0.133946] pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff]
[ 0.134058] pci 0000:08:08.0: [10ec:8139] type 00 class 0x020000
[ 0.134083] pci 0000:08:08.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.134097] pci 0000:08:08.0: reg 0x14: [mem 0xd0100000-0xd01000ff]
[ 0.134199] pci 0000:08:08.0: supports D1 D2
[ 0.134202] pci 0000:08:08.0: PME# supported from D1 D2 D3hot D3cold
[ 0.134310] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.134389] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.134395] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.134404] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 0.134407] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff]
(subtractive decode)
[ 0.134429] pci_bus 0000:00: on NUMA node 0
[ 0.134601] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15)
*11
[ 0.134902] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.135152] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.135395] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15)
*10
[ 0.135693] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15)
*0, disabled.
[ 0.137070] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15)
*0, disabled.
[ 0.137380] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.137621] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.166230] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.166327] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.166358] Found 1 acpi root devices
[ 0.166396] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.166620] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.166749] vgaarb: loaded
[ 0.166813] vgaarb: bridge control possible 0000:00:02.0
[ 0.167063] SCSI subsystem initialized
[ 0.167238] libata version 3.00 loaded.
[ 0.167244] ACPI: bus type USB registered
[ 0.167379] usbcore: registered new interface driver usbfs
[ 0.167482] usbcore: registered new interface driver hub
[ 0.167591] usbcore: registered new device driver usb
[ 0.167842] Advanced Linux Sound Architecture Driver Initialized.
[ 0.167917] PCI: Using ACPI for IRQ routing
[ 0.178923] PCI: pci_cache_line_size set to 64 bytes
[ 0.178942] pci 0000:06:00.0: no compatible bridge window for [mem
0xd0000000-0xd0003fff]
[ 0.179046] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.179050] e820: reserve RAM buffer [mem 0x7f680000-0x7fffffff]
[ 0.179331] cfg80211: Calling CRDA to update world regulatory domain
[ 0.179676] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.179756] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.179862] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.182020] Switched to clocksource hpet
[ 0.182154] pnp: PnP ACPI init
[ 0.182224] ACPI: bus type PNP registered
[ 0.182445] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.182520] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.182595] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.182670] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.182743] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.182817] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.182892] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.182966] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.183041] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211026] pnp 00:01: [dma 4]
[ 0.211068] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.211119] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.211251] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.211329] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01
(active)
[ 0.211398] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.211480] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.211554] system 00:05: [io 0x1000-0x107f] could not be reserved
[ 0.211627] system 00:05: [io 0x1180-0x11bf] has been reserved
[ 0.211700] system 00:05: [io 0x1640-0x164f] has been reserved
[ 0.211773] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211831] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.211889] pnp 00:07: Plug and Play ACPI device, IDs SYN011f SYN0100
SYN0002 PNP0f13 (active)
[ 0.211945] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.211967] pnp: PnP ACPI: found 9 devices
[ 0.212046] ACPI: bus type PNP unregistered
[ 0.249931] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01]
add_size 1000
[ 0.249938] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 01] add_size 200000
[ 0.249942] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to
[bus 01] add_size 200000
[ 0.249959] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06]
add_size 1000
[ 0.249963] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit
pref] to [bus 06] add_size 200000
[ 0.249967] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff] to
[bus 06] add_size 200000
[ 0.249987] pci 0000:00:1f.0: BAR 7: [io 0x1000-0x107f] has bogus alignment
[ 0.250076] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff]
get_res_add_size add_size 200000
[ 0.250079] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
[ 0.250083] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x001fffff]
get_res_add_size add_size 200000
[ 0.250086] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref]
get_res_add_size add_size 200000
[ 0.250089] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size
add_size 1000
[ 0.250093] pci 0000:00:1c.2: res[7]=[io 0x1000-0x0fff] get_res_add_size
add_size 1000
[ 0.250102] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[ 0.250178] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff
64bit pref]
[ 0.250303] pci 0000:00:1c.2: BAR 8: assigned [mem 0x80400000-0x806fffff]
[ 0.250379] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80700000-0x808fffff
64bit pref]
[ 0.250505] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.250579] pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.250653] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.250727] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.250804] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.250881] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff
64bit pref]
[ 0.251020] pci 0000:06:00.0: BAR 0: assigned [mem 0x80400000-0x80403fff]
[ 0.251099] pci 0000:00:1c.2: PCI bridge to [bus 06]
[ 0.251170] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.251247] pci 0000:00:1c.2: bridge window [mem 0x80400000-0x806fffff]
[ 0.251323] pci 0000:00:1c.2: bridge window [mem 0x80700000-0x808fffff
64bit pref]
[ 0.251453] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 0.251523] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.251599] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.251685] pci 0000:00:1c.0: enabling device (0100 -> 0103)
[ 0.251940] pci 0000:00:1c.2: enabling device (0100 -> 0103)
[ 0.252143] pci 0000:00:1e.0: setting latency timer to 64
[ 0.252149] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.252152] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.252156] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.252159] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[ 0.252162] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit
pref]
[ 0.252165] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.252168] pci_bus 0000:06: resource 1 [mem 0x80400000-0x806fffff]
[ 0.252171] pci_bus 0000:06: resource 2 [mem 0x80700000-0x808fffff 64bit
pref]
[ 0.252174] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
[ 0.252177] pci_bus 0000:08: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.252180] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.252182] pci_bus 0000:08: resource 5 [mem 0x00000000-0xffffffff]
[ 0.252223] NET: Registered protocol family 2
[ 0.252441] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.252562] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.252662] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.252764] TCP: reno registered
[ 0.252831] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.252909] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.253038] NET: Registered protocol family 1
[ 0.253184] RPC: Registered named UNIX socket transport module.
[ 0.253256] RPC: Registered udp transport module.
[ 0.253324] RPC: Registered tcp transport module.
[ 0.253393] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.253475] pci 0000:00:02.0: Boot video device
[ 0.256012] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 0.256226] PCI: CLS 64 bytes, default 64
[ 0.256338] Simple Boot Flag at 0x36 set to 0x1
[ 0.256696] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54
[ 0.256808] microcode: Microcode Update Driver: v2.00
<tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.257477] audit: initializing netlink socket (disabled)
[ 0.257559] type=2000 audit(1387590703.256:1): initialized
[ 0.258000] bounce pool size: 64 pages
[ 0.258089] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.262238] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 0.262606] msgmni has been set to 1725
[ 0.263866] NET: Registered protocol family 38
[ 0.264131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.264256] io scheduler noop registered
[ 0.264437] io scheduler cfq registered (default)
[ 0.265089] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.265160] crc32: self tests passed, processed 225944 bytes in 266584 nsec
[ 0.265507] crc32c: CRC_LE_BITS = 64
[ 0.265573] crc32c: self tests passed, processed 225944 bytes in 133746 nsec
[ 0.265710] xz_dec_test: module loaded
[ 0.265776] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252
0' and write .xz files to it.
[ 0.266095] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.266217] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.280042] ACPI: AC Adapter [ACAD] (on-line)
[ 0.280257] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.280404] ACPI: Lid Switch [LID]
[ 0.280534] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.280663] ACPI: Power Button [PWRB]
[ 0.280798] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.280923] ACPI: Power Button [PWRF]
[ 0.281080] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 0.281206] ACPI: Sleep Button [SLPF]
[ 0.281280] ACPI Error: Could not enable SleepButton event
(20130517/evxfevnt-211)
[ 0.281422] ACPI Warning: Could not enable fixed event - SleepButton (3)
(20130517/evxface-488)
[ 0.284086] button: probe of LNXSLPBN:00 failed with error -22
[ 0.330061] acpi device:05: registered as cooling_device0
[ 0.330165] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.330302] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 0.330570] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.330653] ACPI: acpi_idle registered with cpuidle
[ 0.366045] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.366118] ACPI: Thermal Zone [TZ01] (25 C)
[ 0.366311] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.366383] ACPI: Thermal Zone [TZ02] (27 C)
[ 0.366817] intel_rng: FWH not detected
[ 0.366886] Linux agpgart interface v0.103
[ 0.366975] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.367106] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total,
262144K mappable
[ 0.367453] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.367711] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.367841] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds,
margin is 60 seconds).
[ 0.367966] Hangcheck: Using getrawmonotonic().
[ 0.368115] [drm] Initialized drm 1.1.0 20060810
[ 0.368660] [drm] Memory usable by graphics device = 256M
[ 0.368738] i915 0000:00:02.0: setting latency timer to 64
[ 0.369426] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.369509] [drm] Driver supports precise vblank timestamp query.
[ 0.369664] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.395548] [drm] initialized overlay support
[ 0.554708] fbcon: inteldrmfb (fb0) is primary device
[ 1.229330] Console: switching to colour frame buffer device 160x50
[ 1.233648] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.233697] i915 0000:00:02.0: registered panic notifier
[ 1.233745] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 1.234746] loop: module loaded
[ 1.235036] ahci 0000:00:1f.2: version 3.0
[ 1.235239] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.235327] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1
impl SATA mode
[ 1.235397] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.235454] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.236096] scsi0 : ahci
[ 1.236234] scsi1 : ahci
[ 1.236353] scsi2 : ahci
[ 1.236468] scsi3 : ahci
[ 1.236571] ata1: SATA max UDMA/133 abar m1024 at 0xd0544400 port 0xd0544500
irq 42
[ 1.236629] ata2: DUMMY
[ 1.236651] ata3: DUMMY
[ 1.236673] ata4: DUMMY
[ 1.236856] ata_piix 0000:00:1f.1: version 2.13
[ 1.237115] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.237531] scsi4 : ata_piix
[ 1.237648] scsi5 : ata_piix
[ 1.237745] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.237800] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.238082] ata6: port disabled--ignoring
[ 1.238301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.239926] ehci-pci: EHCI PCI platform driver
[ 1.241718] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 1.241730] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.243336] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 1.244966] ehci-pci 0000:00:1d.7: debug port 1
[ 1.250472] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.250489] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0544000
[ 1.258021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.259758] hub 1-0:1.0: USB hub found
[ 1.261330] hub 1-0:1.0: 6 ports detected
[ 1.262996] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.264723] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.264728] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.266241] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 1.267758] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.269370] hub 2-0:1.0: USB hub found
[ 1.270832] hub 2-0:1.0: 2 ports detected
[ 1.272453] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.272457] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.273947] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 1.275442] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.277051] hub 3-0:1.0: USB hub found
[ 1.278504] hub 3-0:1.0: 2 ports detected
[ 1.280091] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.280096] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.281529] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 1.283000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.284580] hub 4-0:1.0: USB hub found
[ 1.286044] hub 4-0:1.0: 2 ports detected
[ 1.287620] usbcore: registered new interface driver usb-storage
[ 1.289195] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.309544] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.311055] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.312675] mousedev: PS/2 mouse device common for all mice
[ 1.314468] rtc_cmos 00:08: RTC can wake from S4
[ 1.316084] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.317529] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 1.318997] i2c /dev entries driver
[ 1.320867] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 1.322670] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised:
dm-devel at redhat.com
[ 1.324276] cpuidle: using governor ladder
[ 1.325852] cpuidle: using governor menu
[ 1.327402] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.329342] usbcore: registered new interface driver usbhid
[ 1.330903] usbhid: USB HID core driver
[ 1.332865] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 1.335443] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
[ 1.340200] hda_codec: CX20549 (Venice): BIOS auto-probing.
[ 1.344646] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 1.346449] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.353750] Netfilter messages via NETLINK v0.30.
[ 1.355465] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.357297] ctnetlink v0.93: registering with nfnetlink.
[ 1.359135] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.361359] TCP: cubic registered
[ 1.363063] NET: Registered protocol family 17
[ 1.364978] Using IPI Shortcut mode
[ 1.367766] rtc_cmos 00:08: setting system clock to 2013-12-21 01:51:44 UTC
(1387590704)
[ 1.369593] ALSA device list:
[ 1.372331] #0: HDA Intel at 0xd0340000 irq 43
[ 1.408416] ata5.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D400, max UDMA/33
[ 1.432289] ata5.00: configured for UDMA/33
[ 1.541061] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.543678] ata1.00: ATA-8: ST9250410AS, 0006HPM1, max UDMA/100
[ 1.545447] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.548252] ata1.00: configured for UDMA/100
[ 1.561140] scsi 0:0:0:0: Direct-Access ATA ST9250410AS 0006
PQ: 0 ANSI: 5
[ 1.563171] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232
GiB)
[ 1.565047] sd 0:0:0:0: [sda] Write Protect is off
[ 1.566884] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.566905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.569123] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.574358] scsi 4:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D400
PQ: 0 ANSI: 5
[ 1.582583] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 1.584498] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.586544] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.586741] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.616850] sda: sda1 sda2 sda3
[ 1.619087] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.300248] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id:
0x1a0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 152129
[ 2.368092] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input8
[ 2.405710] REISERFS (device sda2): found reiserfs format "3.6" with
standard journal
[ 2.407774] REISERFS (device sda2): using ordered data mode
[ 2.409818] reiserfs: using flush barriers
[ 2.415016] REISERFS (device sda2): journal params: device sda2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 2.419730] REISERFS (device sda2): checking transaction log (sda2)
[ 2.479507] REISERFS (device sda2): Using r5 hash to sort names
[ 2.481670] VFS: Mounted root (reiserfs filesystem) readonly on device 8:2.
[ 2.484076] Freeing unused kernel memory: 336K (c1752000 - c17a6000)
[ 3.757690] setfont (883) used greatest stack depth: 5872 bytes left
[ 3.907475] init-early.sh (882) used greatest stack depth: 5680 bytes left
[ 5.415797] systemd-udevd[1010]: starting version 208
[ 6.238073] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[ 6.238087] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor
0x4243)
[ 6.238096] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor
0x4243)
[ 6.238105] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor
0x4243)
[ 6.238114] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[ 6.261097] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[ 6.497782] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 6.497824] 8139too 0000:08:08.0: enabling device (0105 -> 0107)
[ 6.499051] 8139too 0000:08:08.0 eth0: RealTek RTL8139 at 0xf8274000,
00:16:d4:bd:2b:64, IRQ 16
[ 7.739895] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
[ 7.754032] b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
[ 7.761205] Broadcom 43xx driver loaded [ Features: PN ]
[ 7.829224] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.849829] reiserfs: enabling write barrier flush mode
[ 10.115516] Adding 2048280k swap on /dev/sda3. Priority:-1 extents:1
across:2048280k
[ 10.384314] fuse init (API version 7.22)
[ 10.385277] modprobe (1435) used greatest stack depth: 5568 bytes left
[ 11.047297] find (1486) used greatest stack depth: 5496 bytes left
--
You are receiving this mail because:
You are on the CC list for the bug.
You are the assignee for the bug.
More information about the intel-gfx-bugs
mailing list