[Bug 70295] Error using xrandr to change screen configuration/positions

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=70295

--- Comment #2 from Ilia Mirkin <imirkin at alum.mit.edu> ---
Nothing funny in xrandr, here is the full output. (Except the VIRTUAL screen
mode.)

The bug does seem similar to #70132, and the version numbers seem to match up.
I'll do a bisect between .901 and .903 if there are no obvious candidates. Note
that I'm on 3.10.7 (+ gentoo patches, but they are usually not too invasive --
http://dev.gentoo.org/~mpagano/genpatches/patches-3.10-13.htm) for both the
originally working and the broken setups.

$ xrandr -q
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 32767 x 32767
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 310mm x
174mm
   1600x900       60.0 +
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 519mm
x 324mm
   1920x1200      60.0*+
   1920x1080      60.0  
   1920x1080i     60.1  
   1600x1200      60.0  
   1280x1024      75.0     60.0  
   1152x864       75.0  
   1280x720       60.0  
   1440x576i      50.1  
   1024x768       75.1     60.0  
   1440x480i      60.1  
   800x600        75.0     60.3  
   720x480        59.9  
   640x480        75.0     60.0     59.9  
   720x400        70.1  
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
   (0x4c)   98.2MHz
        h: width  1600 start 1648 end 1680 total 1760 skew    0 clock   55.8KHz
        v: height  900 start  902 end  907 total  930           clock   60.0Hz

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20131008/05ea5e4d/attachment-0001.html>