[Bug 63651] New: DVI connected monitor only sleeps
bugzilla-daemon at bugzilla.kernel.org
bugzilla-daemon at bugzilla.kernel.org
Fri Oct 25 00:38:04 CEST 2013
https://bugzilla.kernel.org/show_bug.cgi?id=63651
Bug ID: 63651
Summary: DVI connected monitor only sleeps
Product: Drivers
Version: 2.5
Kernel Version: 3.11
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - Intel)
Assignee: intel-gfx-bugs at lists.freedesktop.org
Reporter: matthew.batema+linux-kernel-bugz at gmail.com
CC: intel-gfx-bugs at lists.freedesktop.org
Regression: No
I have a Lenovo ThinkPad t430i with a dock. The dock has one DVI and
DisplayPort connector each. When using kernel 3.10, I use all three displays.
However, after upgrading to linux 3.11, the DVI connected monitor will only
enter sleep mode when connected (from either non-X tty or when X is running).
uname -srvmo:
Linux 3.11.2-1-ARCH #1 SMP PREEMPT Fri Sep 27 07:35:36 CEST 2013 x86_64
GNU/Linux
Output from xrandr shows that all three displays are present, but I receive
"xrandr: Configure crtc 2 failed" when I try to manipulate the DVI output:
Screen 0: minimum 320 x 200, current 3046 x 1050, maximum 32767 x 32767
LVDS1 connected 1366x768+1680+0 (normal left inverted right x axis y axis)
309mm x 173mm
1366x768 60.1*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 473mm
x 296mm
1680x1050 60.0*+
1600x1200 60.0
1280x1024 60.0
1440x900 59.9
1280x960 60.0
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
HDMI3 connected (normal left inverted right x axis y axis)
1680x1050 60.0 +
1600x1200 60.0
1280x1024 60.0
1440x900 59.9
1280x960 60.0
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
lspci -vv shows:
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor
Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 21f3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
Please let me know what other information is helpful. Thank you.
--
You are receiving this mail because:
You are on the CC list for the bug.
You are the assignee for the bug.
More information about the intel-gfx-bugs
mailing list