[Bug 55161] Backlight Software control is acting wrong

[bugzilla-daemon at bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=55161

--- Comment #34 from pqwoerituytrueiwoq at gmail.com ---
I am not 100% sure if it is working perfectly but even without the
acpi_osi='!Windows 2012' parameter, the backlight seems to work much better
than it did when i made the initial report
i can not tell a difference with or without the parameter, so that is a
definite improvement
i would not consider the current state a regression, in its current state it is
manageable, the fn brighness changes do not show up in software so if you
change that during boot when the user logs in the brightness reset to whet ever
it was set to via software or 100% if it was never set via software like
xbacklight
now lets have some fun with 3.14rc1 :)

with the current 1.13.1 and 3.14rc1 i cant see a difference with or without the
added parameter

when using the fn keys there are a few levels over 100% that are all actually
100%, what i mean by that is i hit fn+F6 to up it 20 times when i hit fn+f5 to
bring it down the 1st few times don't do anything
as long as xbacklight or my backlightx script works that is good enough for me

-- 
You are receiving this mail because:
You are on the CC list for the bug.