[Bug 91740] New: Fails to wake Display Port monitor after putting the monitor to sleep.
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Sun Aug 23 22:05:47 PDT 2015
https://bugs.freedesktop.org/show_bug.cgi?id=91740
Bug ID: 91740
Summary: Fails to wake Display Port monitor after putting the
monitor to sleep.
Product: DRI
Version: XOrg git
Hardware: x86-64 (AMD64)
OS: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: DRM/Intel
Assignee: intel-gfx-bugs at lists.freedesktop.org
Reporter: daniel.rowe at fathom13.com
QA Contact: intel-gfx-bugs at lists.freedesktop.org
CC: intel-gfx-bugs at lists.freedesktop.org
After a Samsung monitor goes to sleep if fails to wake up requiring the
monitors power cable to be pull of the DP called pulled.
This is in the logs:
[356509.261411] [drm:intel_dp_complete_link_train [i915]] *ERROR* failed to
start channel equalization
[357167.172244] [drm:intel_dp_start_link_train [i915]] *ERROR* too many full
retries, give up
Monitor details: Samsung S27D850T running at 2560X1440
Kernel: 4.1.5-200.fc22.x86_64
lspci:
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA
controller])
DeviceName: Onboard Graphics
Subsystem: Acer Incorporated [ALI] Device 0493
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: feeff00c Data: 4182
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915
for file in /sys/module/i915/parameters/*; do echo -en $file"\t"; sudo cat
$file; done;
/sys/module/i915/parameters/disable_display N
/sys/module/i915/parameters/disable_power_well 1
/sys/module/i915/parameters/disable_vtd_wa N
/sys/module/i915/parameters/enable_cmd_parser 1
/sys/module/i915/parameters/enable_execlists 0
/sys/module/i915/parameters/enable_fbc -1
/sys/module/i915/parameters/enable_hangcheck Y
/sys/module/i915/parameters/enable_ips 1
/sys/module/i915/parameters/enable_ppgtt 1
/sys/module/i915/parameters/enable_psr 0
/sys/module/i915/parameters/enable_rc6 1
/sys/module/i915/parameters/fastboot N
/sys/module/i915/parameters/invert_brightness 0
/sys/module/i915/parameters/load_detect_test N
/sys/module/i915/parameters/lvds_channel_mode 0
/sys/module/i915/parameters/lvds_downclock 0
/sys/module/i915/parameters/lvds_use_ssc -1
/sys/module/i915/parameters/mmio_debug 0
/sys/module/i915/parameters/modeset -1
/sys/module/i915/parameters/nuclear_pageflip N
/sys/module/i915/parameters/panel_ignore_lid 1
/sys/module/i915/parameters/prefault_disable N
/sys/module/i915/parameters/preliminary_hw_support 0
/sys/module/i915/parameters/reset Y
/sys/module/i915/parameters/semaphores -1
/sys/module/i915/parameters/use_mmio_flip 0
/sys/module/i915/parameters/vbt_sdvo_panel_type -1
/sys/module/i915/parameters/verbose_state_checks Y
--
You are receiving this mail because:
You are the QA Contact for the bug.
You are on the CC list for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20150824/349cb8a3/attachment.html>
More information about the intel-gfx-bugs
mailing list