[Bug 90951] New: HD4000: Display connected to displayport doesn't wake up when it's turn off and on or enters power saving mode
bugzilla-daemon at bugzilla.kernel.org
bugzilla-daemon at bugzilla.kernel.org
Wed Jan 7 18:20:22 PST 2015
https://bugzilla.kernel.org/show_bug.cgi?id=90951
Bug ID: 90951
Summary: HD4000: Display connected to displayport doesn't wake
up when it's turn off and on or enters power saving
mode
Product: Drivers
Version: 2.5
Kernel Version: 3.18.1
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Video(DRI - Intel)
Assignee: intel-gfx-bugs at lists.freedesktop.org
Reporter: rauchwolke at gmx.net
CC: intel-gfx-bugs at lists.freedesktop.org
Regression: No
I use a x220 with a Hd4000 GPU. It only supports two display at the same time
and has a Display connected to the displayport and one connected to the VGA
port (both are active and the integrated display is turned off)
Screen 0: minimum 8 x 8, current 3584 x 1080, maximum 32767 x 32767
LVDS1 connected (normal left inverted right x axis y axis)
1366x768 60.0 +
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
DP1 connected primary 2560x1080+0+0 (normal left inverted right x axis y axis)
677mm x 290mm
2560x1080 60.0*+
1920x1080 60.0 60.0 50.0 59.9
1920x1080i 60.1 50.0 60.0
1680x1050 60.0
1600x900 60.0
1280x1024 75.0 60.0
1152x864 75.0
1280x720 60.0 50.0 59.9
1024x768 75.1 60.0
800x600 75.0 60.3
720x576 50.0
720x480 60.0 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
VGA1 connected 1024x768+2560+0 (normal left inverted right x axis y axis) 920mm
x 518mm
1024x768 60.0*+ 75.1 70.1
800x600 85.1 72.2 75.0 60.3 56.2
848x480 60.0
640x480 85.0 75.0 72.8 60.0 59.9
720x400 70.1
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
After the display that is connted to the displayport is turned off and on again
the display doesnt work anymore and goes back into power saving mode after a
few seconds. When i turn off the display and turn it on again with xrandr it
works again.The same happens when i just use the display at the display port
and the internal display. The same thing also happens when the display
connected to the displayport enters sleeping mode, most of the time.
The display at the VGA port works as expected.
--
You are receiving this mail because:
You are on the CC list for the bug.
You are the assignee for the bug.
More information about the intel-gfx-bugs
mailing list