[Bug 93781] [BAT BDW] HDMI connector lost its modes during module reload

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=93781

Elio <elio.martinez.monroy at intel.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         Resolution|---                         |WORKSFORME
             Status|NEW                         |RESOLVED

--- Comment #3 from Elio <elio.martinez.monroy at intel.com> ---
The bug is not present with following configuration:
--- Software information ---

 ++ Kernel version                      : 4.4.4-040404-generic
 ++ Linux distribution                  : Ubuntu 15.10
 ++ Architecture                        : 64-bit

 ++ xf86-video-intel version            : 2.99.917
 ++ Xorg-Xserver version                : 1.17.2
 ++ DRM version                         : 2.4.64
 ++ VAAPI version                       : Intel i965 driver for Intel(R)
Broadwell - 1.6.0
 ++ Cairo version                       : 1.14.2
 ++ Intel GPU Tools version             : Tag
[intel-gpu-tools-1.14-74-g431f6c4] / Commit [431f6c4]
 ++ Kernel driver in use                : i915
 ++ Bios revision                       : 5.6


 --- Hardware information ---

 ++ Platform                            :
 ++ Motherboard model                   :
 ++ Motherboard type                    : NUC5i7RYB Desktop
 ++ Motherboard manufacturer            :
 ++ CPU family                          : Core i7
 ++ CPU information                     : Intel(R) Core(TM) i7-5557U CPU @
3.10GHz
 ++ GPU Card                            : Intel Corporation Broadwell-U
Integrated Graphics (rev 09) (prog-if 00 [VGA controller])
 ++ Memory ram                          : 8 GB
 ++ Maximum memory ram allowed          : 16 GB
 ++ Display resolution                  :
 ++ CPU's number                        : 4
 ++ Hard drive capacity                 : 120 GB


Output:

./kms_pipe_crc_basic
IGT-Version: 1.14-g431f6c4 (x86_64) (Linux: 4.4.4-040404-generic x86_64)
Subtest bad-pipe: SUCCESS (0.000s)
Subtest bad-source: SUCCESS (0.000s)
Subtest bad-nb-words-1: SUCCESS (0.000s)
Subtest bad-nb-words-3: SUCCESS (0.000s)
read-crc-pipe-A: Testing connector HDMI-A-1 using pipe A
read-crc-pipe-A: Testing connector DP-1 using pipe A
Subtest read-crc-pipe-A: SUCCESS (1.576s)
read-crc-pipe-A-frame-sequence: Testing connector HDMI-A-1 using pipe A
read-crc-pipe-A-frame-sequence: Testing connector DP-1 using pipe A
Subtest read-crc-pipe-A-frame-sequence: SUCCESS (2.684s)
nonblocking-crc-pipe-A: Testing connector HDMI-A-1 using pipe A
nonblocking-crc-pipe-A: Testing connector DP-1 using pipe A
Subtest nonblocking-crc-pipe-A: SUCCESS (1.733s)
nonblocking-crc-pipe-A-frame-sequence: Testing connector HDMI-A-1 using pipe A
nonblocking-crc-pipe-A-frame-sequence: Testing connector DP-1 using pipe A
Subtest nonblocking-crc-pipe-A-frame-sequence: SUCCESS (1.695s)
rtcwake: assuming RTC uses UTC ...
rtcwake: wakeup from "mem" using /dev/rtc0 at Thu Mar 17 17:05:00 2016
suspend-read-crc-pipe-A: Testing connector HDMI-A-1 using pipe A
suspend-read-crc-pipe-A: Testing connector DP-1 using pipe A
Subtest suspend-read-crc-pipe-A: SUCCESS (2.826s)
hang-read-crc-pipe-A: Testing connector DP-1 using pipe A
Subtest hang-read-crc-pipe-A: SUCCESS (6.151s)
read-crc-pipe-B: Testing connector HDMI-A-1 using pipe B
read-crc-pipe-B: Testing connector DP-1 using pipe B
Subtest read-crc-pipe-B: SUCCESS (1.212s)
read-crc-pipe-B-frame-sequence: Testing connector HDMI-A-1 using pipe B
read-crc-pipe-B-frame-sequence: Testing connector DP-1 using pipe B
Subtest read-crc-pipe-B-frame-sequence: SUCCESS (1.180s)
nonblocking-crc-pipe-B: Testing connector HDMI-A-1 using pipe B
nonblocking-crc-pipe-B: Testing connector DP-1 using pipe B
Subtest nonblocking-crc-pipe-B: SUCCESS (1.181s)
nonblocking-crc-pipe-B-frame-sequence: Testing connector HDMI-A-1 using pipe B
nonblocking-crc-pipe-B-frame-sequence: Testing connector DP-1 using pipe B
Subtest nonblocking-crc-pipe-B-frame-sequence: SUCCESS (1.184s)
rtcwake: assuming RTC uses UTC ...
rtcwake: wakeup from "mem" using /dev/rtc0 at Thu Mar 17 17:05:24 2016
suspend-read-crc-pipe-B: Testing connector HDMI-A-1 using pipe B
suspend-read-crc-pipe-B: Testing connector DP-1 using pipe B
Subtest suspend-read-crc-pipe-B: SUCCESS (2.145s)
hang-read-crc-pipe-B: Testing connector DP-1 using pipe B
Subtest hang-read-crc-pipe-B: SUCCESS (4.934s)
read-crc-pipe-C: Testing connector HDMI-A-1 using pipe C
read-crc-pipe-C: Testing connector DP-1 using pipe C
Subtest read-crc-pipe-C: SUCCESS (1.195s)
read-crc-pipe-C-frame-sequence: Testing connector HDMI-A-1 using pipe C
read-crc-pipe-C-frame-sequence: Testing connector DP-1 using pipe C
Subtest read-crc-pipe-C-frame-sequence: SUCCESS (1.184s)
nonblocking-crc-pipe-C: Testing connector HDMI-A-1 using pipe C
nonblocking-crc-pipe-C: Testing connector DP-1 using pipe C
Subtest nonblocking-crc-pipe-C: SUCCESS (1.181s)
nonblocking-crc-pipe-C-frame-sequence: Testing connector HDMI-A-1 using pipe C
nonblocking-crc-pipe-C-frame-sequence: Testing connector DP-1 using pipe C
Subtest nonblocking-crc-pipe-C-frame-sequence: SUCCESS (1.180s)
rtcwake: assuming RTC uses UTC ...
rtcwake: wakeup from "mem" using /dev/rtc0 at Thu Mar 17 17:05:42 2016
suspend-read-crc-pipe-C: Testing connector HDMI-A-1 using pipe C
suspend-read-crc-pipe-C: Testing connector DP-1 using pipe C
Subtest suspend-read-crc-pipe-C: SUCCESS (2.343s)
hang-read-crc-pipe-C: Testing connector HDMI-A-1 using pipe C
hang-read-crc-pipe-C: Testing connector DP-1 using pipe C
Subtest hang-read-crc-pipe-C: SUCCESS (6.699s)

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
You are on the CC list for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20160317/9d929d21/attachment-0001.html>