[Bug 104522] [drm] GPU HANG: ecode 7:0:0x87f3fffe, reason: Hang on rcs0, action: reset

Sun Jan 7 09:40:22 UTC 2018

https://bugs.freedesktop.org/show_bug.cgi?id=104522

--- Comment #2 from Knut Herbert <knutihe at web.de> ---
[ 9141.547842] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR*
uncleared pch fifo underrun on pch transcoder A
[ 9141.547860] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO
underrun
[ 9141.570848] PM: suspend entry (deep)
[ 9141.570849] PM: Syncing filesystems ... done.
[ 9141.573606] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 9141.574743] OOM killer disabled.
[ 9141.574744] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 9141.575864] Suspending console(s) (use no_console_suspend to debug)
[ 9141.576178] sd 4:0:0:0: [sde] Synchronizing SCSI cache
[ 9141.576207] sd 3:0:0:0: [sdd] Synchronizing SCSI cache
[ 9141.576225] sd 4:0:0:0: [sde] Stopping disk
[ 9141.576238] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[ 9141.576263] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 9141.576279] sd 3:0:0:0: [sdd] Stopping disk
[ 9141.576294] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9141.576306] sd 2:0:0:0: [sdc] Stopping disk
[ 9141.576333] sd 1:0:0:0: [sdb] Stopping disk
[ 9141.576364] sd 0:0:0:0: [sda] Stopping disk
[ 9141.576680] e1000e: EEE TX LPI TIMER: 00000011
[ 9142.081495] Display power well on
[ 9142.081519] ------------[ cut here ]------------
[ 9142.081593] WARNING: CPU: 0 PID: 2860 at
/build/linux-ryBv1B/linux-4.14.12/drivers/gpu/drm/i915/intel_display.c:8825
hsw_enable_pc8+0x654/0x6c0 [i915]
[ 9142.081594] Modules linked in: binfmt_misc snd_hda_codec_hdmi iTCO_wdt
iTCO_vendor_support evdev intel_rapl x86_pkg_temp_thermal intel_powerclamp
coretemp kvm_intel kvm irqbypass crct10dif_pclmul snd_hda_codec_realtek
crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel intel_cstate
intel_uncore intel_rapl_perf pcspkr i915 snd_hda_intel snd_hda_codec
snd_hda_core snd_hwdep snd_pcm snd_timer drm_kms_helper snd sg drm mei_me
soundcore i2c_algo_bit mei lpc_ich mfd_core battery video button nfsd
auth_rpcgss nfs_acl lockd grace sunrpc loop ip_tables x_tables autofs4 ext4
crc16 mbcache jbd2 fscrypto ecb crypto_simd cryptd glue_helper aes_x86_64
raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy
async_pq async_xor async_tx xor raid6_pq libcrc32c crc32c_generic md_mod sd_mod
ahci
[ 9142.081667]  libahci libata crc32c_intel i2c_i801 scsi_mod ehci_pci ehci_hcd
xhci_pci xhci_hcd e1000e ptp pps_core usbcore usb_common fan thermal
[ 9142.081685] CPU: 0 PID: 2860 Comm: kworker/u4:31 Not tainted 4.14.0-3-amd64
#1 Debian 4.14.12-2
[ 9142.081687] Hardware name:                  /DH87RL, BIOS
RLH8710H.86A.0327.2014.0924.1645 09/24/2014
[ 9142.081695] Workqueue: events_unbound async_run_entry_fn
[ 9142.081698] task: ffff8a2055533180 task.stack: ffffae6702bc8000
[ 9142.081762] RIP: 0010:hsw_enable_pc8+0x654/0x6c0 [i915]
[ 9142.081764] RSP: 0018:ffffae6702bcbda0 EFLAGS: 00010286
[ 9142.081767] RAX: 0000000000000015 RBX: ffff8a2059b58000 RCX:
ffffffffaa24d248
[ 9142.081769] RDX: 0000000000000000 RSI: 0000000000000082 RDI:
0000000000000202
[ 9142.081771] RBP: ffff8a2059b58330 R08: 0000000000000000 R09:
0000000000000015
[ 9142.081773] R10: 0000000000000700 R11: 0000000000000000 R12:
ffff8a2059b58340
[ 9142.081774] R13: ffffffffc09aa75d R14: 0000000000000000 R15:
ffffffffaa075165
[ 9142.081777] FS:  0000000000000000(0000) GS:ffff8a205fa00000(0000)
knlGS:0000000000000000
[ 9142.081779] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9142.081781] CR2: 00007ff33bd235e0 CR3: 000000003e00a006 CR4:
00000000000606f0
[ 9142.081783] Call Trace:
[ 9142.081827]  i915_drm_suspend_late+0x13f/0x150 [i915]
[ 9142.081862]  ? i915_pm_poweroff_late+0x30/0x30 [i915]
[ 9142.081867]  dpm_run_callback+0x4b/0x130
[ 9142.081872]  __device_suspend_late+0x8c/0x160
[ 9142.081876]  async_suspend_late+0x1a/0x90
[ 9142.081881]  async_run_entry_fn+0x33/0x160
[ 9142.081888]  process_one_work+0x185/0x380
[ 9142.081892]  worker_thread+0x2e/0x390
[ 9142.081897]  ? process_one_work+0x380/0x380
[ 9142.081902]  kthread+0x118/0x130
[ 9142.081908]  ? kthread_create_on_node+0x70/0x70
[ 9142.081914]  ret_from_fork+0x1f/0x30
[ 9142.081917] Code: e8 0d eb 98 e8 0f ff e9 9a fb ff ff 48 c7 c7 17 a8 9a c0
e8 fa ea 98 e8 0f ff e9 7a fb ff ff 48 c7 c7 77 a7 9a c0 e8 e7 ea 98 e8 <0f> ff
e9 64 fa ff ff 48 c7 c7 bc a7 9a c0 e8 d4 ea 98 e8 0f ff
[ 9142.081973] ---[ end trace 0ce398742da10540 ]---
[ 9142.122490] ACPI: Preparing to enter system sleep state S3
[ 9142.123477] PM: Saving platform NVS memory
[ 9142.123501] Disabling non-boot CPUs ...
[ 9142.139232] smpboot: CPU 1 is now offline
[ 9142.141116] ACPI: Low-level resume complete
[ 9142.141169] PM: Restoring platform NVS memory
[ 9142.143510] Enabling non-boot CPUs ...
[ 9142.143604] x86: Booting SMP configuration:
[ 9142.143605] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 9142.145218]  cache: parent cpu1 should not be sleeping
[ 9142.145351] CPU1 is up
[ 9142.146675] ACPI: Waking up from system sleep state S3
[ 9142.171758] sd 0:0:0:0: [sda] Starting disk
[ 9142.171804] sd 1:0:0:0: [sdb] Starting disk
[ 9142.171833] sd 2:0:0:0: [sdc] Starting disk
[ 9142.171845] sd 3:0:0:0: [sdd] Starting disk
[ 9142.171873] sd 4:0:0:0: [sde] Starting disk
[ 9142.339704] OOM killer enabled.
[ 9142.339706] Restarting tasks ... done.
[ 9142.340402] video LNXVIDEO:00: Restoring backlight state
[ 9142.340406] PM: suspend exit
[ 9142.533891] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9142.534404] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 9142.534406] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 9142.534407] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 9142.535200] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 9142.535202] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 9142.535203] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 9142.535492] ata5.00: configured for UDMA/100
[ 9145.297869] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 9147.579688] ata4: link is slow to respond, please be patient (ready=0)
[ 9147.579710] ata1: link is slow to respond, please be patient (ready=0)
[ 9147.579719] ata2: link is slow to respond, please be patient (ready=0)
[ 9147.587711] ata3: link is slow to respond, please be patient (ready=0)
[ 9150.947771] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9151.063785] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9151.130374] ata3.00: configured for UDMA/133
[ 9151.179755] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9151.248397] ata4.00: configured for UDMA/133
[ 9151.363809] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9151.371950] ata2.00: configured for UDMA/133
[ 9151.519382] ata1.00: configured for UDMA/133
[ 9159.109562] [drm] GPU HANG: ecode 7:0:0x87f3fffe, reason: Hang on rcs0,
action: reset
[ 9159.109566] [drm] GPU hangs can indicate a bug anywhere in the entire gfx
stack, including userspace.
[ 9159.109567] [drm] Please file a _new_ bug report on bugs.freedesktop.org
against DRI -> DRM/Intel
[ 9159.109569] [drm] drm/i915 developers can then reassign to the right
component if it's not a kernel issue.
[ 9159.109570] [drm] The gpu crash dump is required to analyze gpu hangs, so
please always attach it.
[ 9159.109572] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 9159.109717] i915 0000:00:02.0: Resetting chip after gpu hang
[ 9169.084229] i915 0000:00:02.0: Resetting chip after gpu hang
[ 9169.084362] [drm:i915_reset [i915]] *ERROR* GPU recovery failed

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
You are on the CC list for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20180107/9a1cc3d3/attachment.html>