[Bug 105216] [IGT] kms_cursor_legacy sub tests are failing with message Timed out: Scheduling page flip

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=105216

--- Comment #6 from Hector Velazquez <hector.franciscox.velazquez.suriano at intel.com> ---
This tests has failing on CNL QA 
Tests List:
igt at kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic
igt at kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic

output sample:
. . .
**** DEBUG ****
(kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "CRTC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "CRTC_W" to
0x40/64
(kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "CRTC_H" to
0x40/64
(kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "FB_ID" to
0x9d/157
(kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: plane B.4: Setting property "rotation"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe C: Setting property "MODE_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe C: Setting property "ACTIVE" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     populating plane data: C.0,
fb 0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "SRC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "SRC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "SRC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "SRC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "FB_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "CRTC_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.0: Setting property "rotation"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     populating plane data: C.1,
fb 0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "SRC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "SRC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "SRC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "SRC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "FB_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "CRTC_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.1: Setting property "rotation"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     populating plane data: C.2,
fb 0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "SRC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "SRC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "SRC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "SRC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "FB_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "CRTC_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.2: Setting property "rotation"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     populating plane data: C.3,
fb 0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "SRC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "SRC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "SRC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "SRC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "FB_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "CRTC_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.3: Setting property "rotation"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     populating plane data: C.4,
fb 0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "SRC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "SRC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "SRC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "SRC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_W" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_H" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "FB_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "CRTC_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane C.4: Setting property "rotation"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     eDP-1: preparing atomic,
pipe: A
(kms_cursor_legacy:887) igt-kms-DEBUG: eDP-1: Setting property "CRTC_ID" to
0x33/51
(kms_cursor_legacy:887) igt-kms-DEBUG: eDP-1: Setting property "Broadcast RGB"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     DP-1: preparing atomic,
pipe: A
(kms_cursor_legacy:887) igt-kms-DEBUG: DP-1: Setting property "CRTC_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: DP-1: Setting property "Broadcast RGB"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "Broadcast
RGB" to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     DP-2: preparing atomic,
pipe: A
(kms_cursor_legacy:887) igt-kms-DEBUG: DP-2: Setting property "CRTC_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: DP-2: Setting property "Broadcast RGB"
to 0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: set_pipe(None)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: Selecting pipe None
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: None
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: plane_set_fb(146)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: plane_set_size (2560x1440)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: fb_set_size(2560x1440)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     populating plane data: A.0,
fb 146
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_W" to
0xa000000/167772160
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_H" to
0x5a00000/94371840
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_W" to
0xa00/2560
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_H" to
0x5a0/1440
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "FB_ID" to
0x92/146
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_ID" to
0x33/51
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: set_pipe(B)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: HDMI-A-1: Selecting pipe B
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "MODE_ID" to
0x8e/142
(kms_cursor_legacy:887) igt-kms-DEBUG: Pipe B: Setting property "ACTIVE" to
0x1/1
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     HDMI-A-1: preparing atomic,
pipe: B
(kms_cursor_legacy:887) igt-kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to
0x4b/75
(kms_cursor_legacy:887) igt-kms-DEBUG: display: }
(kms_cursor_legacy:887) igt-kms-DEBUG: Test requirement passed: plane_idx >= 0
&& plane_idx < pipe->n_planes
(kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: plane_set_fb(146)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: plane_set_size (2560x1440)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: A.0: fb_set_size(2560x1440)
(kms_cursor_legacy:887) igt-kms-DEBUG: display: commit {
(kms_cursor_legacy:887) igt-kms-DEBUG: display:     populating plane data: A.0,
fb 146
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_X" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_Y" to
0x0/0
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_W" to
0xa000000/167772160
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "SRC_H" to
0x5a00000/94371840
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_W" to
0xa00/2560
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_H" to
0x5a0/1440
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "FB_ID" to
0x92/146
(kms_cursor_legacy:887) igt-kms-DEBUG: plane A.0: Setting property "CRTC_ID" to
0x33/51
(kms_cursor_legacy:887) igt-core-INFO: Timed out: Scheduling page flip

****  END  ****
. . .

software:
IGT-Version: 1.21-ge3a0ed9 (x86_64) (Linux:
4.16.0-rc4-drm-intel-qa-ww10-commit-8a4eb45+ x86_64)

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
You are on the CC list for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20180307/e729abca/attachment-0001.html>