[Bug 105887] [GLK] no signal after switch resolution from 1080p at 23.98

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=105887

--- Comment #28 from Piotr Kasp. <piotr.kasprzak at me.com> ---
maybe here is problem ?

[    6.777476] [drm:drm_scdc_set_high_tmds_clock_ratio] Failed to set TMDS
clock ratio: -6
[    6.777483] [drm:intel_enable_ddi] *ERROR* [CONNECTOR:101:HDMI-A-1] Failed
to configure sink scrambling/TMDS bit clock ratio
[    6.777507] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:101:HDMI-A-1],
[ENCODER:100:DDI B]
[    6.777511] [drm:hsw_audio_codec_enable] Enable audio codec on pipe A, 40
bytes ELD
[    6.777520] [drm:audio_config_hdmi_pixel_clock] HDMI audio pixel clock
setting for 594000 not found, falling back to defaults
[    6.777523] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for
pixel clock 25200 (0x00010000)

-- 
You are receiving this mail because:
You are the assignee for the bug.
You are the QA Contact for the bug.
You are on the CC list for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20180507/ccc3ec9a/attachment-0001.html>