[Bug 111207] [CI][BAT] boot - fail - logs look good

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=111207

--- Comment #2 from Chris Wilson <chris at chris-wilson.co.uk> ---
(In reply to Martin Peres from comment #0)
> https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6540/fi-apl-guc/boot.html
> 
> <6>[    8.931861] Generic Realtek PHY r8169-300:00: attached PHY driver
> [Generic Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
> <6>[    9.022750] r8169 0000:03:00.0 enp3s0: Link is Down
> <6>[   12.374906] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow
> control off
> <6>[   12.374947] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
> <5>[   16.508071] systemd-journald[258]: Failed to set ACL on
> /var/log/journal/e733d461a16840f5a8c52c75d33640db/user-1000.journal,
> ignoring: Operation not supported

It was

<3>[    3.875347] mmc0: switch to bus width for hs400 failed, err:-84
<3>[    3.875454] mmc0: error -84 whilst initialising MMC card
<3>[    3.985557] mmc0: switch to bus width for hs400 failed, err:-84
<3>[    3.985692] mmc0: error -84 whilst initialising MMC card
<3>[    4.111151] mmc0: switch to hs400 failed, err:-84
<3>[    4.111238] mmc0: error -84 whilst initialising MMC card

-- 
You are receiving this mail because:
You are on the CC list for the bug.
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20190809/531e5f00/attachment.html>