[Bug 109450] New: [CI][BAT] igt at kms_chamelium@hdmi-edid-read - dmesg-warn - *ERROR* Parade FW not ready to accept AVI IF
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Thu Jan 24 13:46:41 UTC 2019
https://bugs.freedesktop.org/show_bug.cgi?id=109450
Bug ID: 109450
Summary: [CI][BAT] igt at kms_chamelium@hdmi-edid-read -
dmesg-warn - *ERROR* Parade FW not ready to accept AVI
IF
Product: DRI
Version: XOrg git
Hardware: Other
OS: All
Status: NEW
Severity: normal
Priority: medium
Component: DRM/Intel
Assignee: intel-gfx-bugs at lists.freedesktop.org
Reporter: martin.peres at free.fr
QA Contact: intel-gfx-bugs at lists.freedesktop.org
CC: intel-gfx-bugs at lists.freedesktop.org
<7> [168.326683] [drm:drm_fb_helper_hotplug_event.part.24]
<7> [168.326691] [drm:drm_setup_crtcs]
<7> [168.326729] [drm:drm_helper_probe_single_connector_modes]
[CONNECTOR:85:DP-1]
<7> [168.326833] [drm:intel_dp_detect [i915]] [CONNECTOR:85:DP-1]
<7> [168.326872] [drm:drm_helper_probe_single_connector_modes]
[CONNECTOR:85:DP-1] disconnected
<7> [168.327103] [drm:drm_helper_probe_single_connector_modes]
[CONNECTOR:93:HDMI-A-1]
<7> [168.327195] [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-1]
<7> [168.327620] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for
addr: 0050 w(1)
<7> [168.327731] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first
message, retry
<7> [168.328028] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for
addr: 0050 w(1)
<7> [168.328060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter
i915 gmbus dpb
<7> [168.328141] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed,
retry using GPIO bit-banging
<7> [168.328222] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on
i915 gmbus dpb. force bit now 1
<7> [168.331077] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter
i915 gmbus dpb
<7> [168.331186] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on
i915 gmbus dpb. force bit now 0
<7> [168.331593] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for
addr: 0040 w(1)
<7> [168.331695] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first
message, retry
<7> [168.331998] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for
addr: 0040 w(1)
<7> [168.332027] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID: (err -6)
<7> [168.332039] [drm:drm_helper_probe_single_connector_modes]
[CONNECTOR:93:HDMI-A-1] disconnected
<7> [168.332049] [drm:drm_helper_probe_single_connector_modes]
[CONNECTOR:99:DP-2]
<7> [168.332123] [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [168.333086] [drm:lspcon_wake_native_aux_ch [i915]] Native AUX CH up, DPCD
version: 1.2
<7> [168.333198] [drm:lspcon_resume [i915]] LSPCON recovering in PCON mode
after 0 ms
<7> [168.334486] [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [168.335589] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 01 01 15 01 81
02 01 04 01 0f 00 01
<7> [168.337809] [drm:intel_dp_print_rates [i915]] source rates: 162000,
216000, 270000, 324000, 432000, 540000
<7> [168.337904] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000,
540000
<7> [168.337996] [drm:intel_dp_print_rates [i915]] common rates: 162000,
270000, 540000
<7> [168.339325] [drm:drm_dp_read_desc] DP branch: OUI 00-1c-f8 dev-ID 175IB0
HW-rev 1.0 SW-rev 7.32 quirks 0x0000
<7> [168.340454] [drm:intel_dp_detect [i915]] MST support? port C: yes, sink:
no, modparam: yes
<7> [168.340804] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.341359] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.341716] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.342089] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.342416] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.342814] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.343111] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.343795] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.344173] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.344531] [drm:drm_dp_i2c_do_msg] I2C nack (result=0, size=0)
<7> [168.345689] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60
101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [168.345703] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [168.345726] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60
148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [168.345736] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [168.345758] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60
74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [168.345768] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [168.345791] [drm:drm_helper_probe_single_connector_modes]
[CONNECTOR:99:DP-2] probed modes :
<7> [168.345861] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60
65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.345878] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60
40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [168.345891] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56
36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [168.345902] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60
33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [168.345914] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60
25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [168.345926] [drm:drm_setup_crtcs] connector 85 enabled? no
<7> [168.345934] [drm:drm_setup_crtcs] connector 93 enabled? no
<7> [168.345943] [drm:drm_setup_crtcs] connector 99 enabled? yes
<7> [168.346135] [drm:intel_fb_initial_config [i915]] Not using firmware
configuration
<7> [168.346170] [drm:drm_setup_crtcs] looking for cmdline mode on connector 99
<7> [168.346179] [drm:drm_setup_crtcs] looking for preferred mode on connector
99 0
<7> [168.346188] [drm:drm_setup_crtcs] found mode 1024x768
<7> [168.346196] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
<7> [168.346244] [drm:drm_setup_crtcs] desired mode 1024x768 set on crtc 47
(0,0)
<7> [168.348262] [drm:intel_atomic_check [i915]] [CONNECTOR:99:DP-2] Limiting
display bpp to 24 instead of EDID bpp 0, requested bpp 36, max platform bpp 36
<7> [168.348533] [drm:intel_dp_compute_config [i915]] DP link computation with
max lane count 4 max rate 540000 max bpp 24 pixel clock 65000KHz
<7> [168.348774] [drm:intel_dp_compute_config [i915]] Force DSC en = 0
<7> [168.348923] [drm:intel_dp_compute_config [i915]] DP lane count 2 clock
162000 bpp 24
<7> [168.349087] [drm:intel_dp_compute_config [i915]] DP link rate required
195000 available 324000
<7> [168.349262] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24,
dithering: 0
<7> [168.349430] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][modeset]
<7> [168.349682] [drm:intel_dump_pipe_config [i915]] output_types: DP (0x80)
<7> [168.349846] [drm:intel_dump_pipe_config [i915]] output format: RGB
<7> [168.350008] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe
bpp: 24, dithering: 0
<7> [168.350129] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m:
2524349, gmch_n: 4194304, link_m: 105181, link_n: 262144, tu: 64
<7> [168.350269] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
<7> [168.350409] [drm:intel_dump_pipe_config [i915]] requested mode:
<7> [168.350508] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60
65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.350671] [drm:intel_dump_pipe_config [i915]] adjusted mode:
<7> [168.350694] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60
65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [168.350862] [drm:intel_dump_pipe_config [i915]] crtc timings: 65000 1024
1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
<7> [168.351034] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe
src size: 1024x768, pixel rate 65000
<7> [168.351177] [drm:intel_dump_pipe_config [i915]] num_scalers: 2,
scaler_users: 0x0, scaler_id: -1
<7> [168.351317] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000,
size: 0x00000000, disabled
<7> [168.351456] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
<7> [168.351644] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x5,
cfgcr1: 0x0, cfgcr2: 0x0
<7> [168.351832] [drm:intel_dump_pipe_config [i915]] planes on this crtc
<7> [168.352019] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A]
FB:109, fb = 1920x1080 format = XR24 little-endian (0x34325258)
<7> [168.352237] [drm:intel_dump_pipe_config [i915]] scaler:-1 src
0x0+1920+1080 dst 0x0+1920+1080
<7> [168.352456] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A]
disabled, scaler_id = -1
<7> [168.352763] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A]
disabled, scaler_id = -1
<7> [168.353008] [drm:intel_atomic_check [i915]] New cdclk calculated to be
logical 337500 kHz, actual 337500 kHz
<7> [168.353230] [drm:intel_atomic_check [i915]] New voltage level calculated
to be logical 0, actual 0
<7> [168.353481] [drm:intel_find_shared_dpll [i915]] [CRTC:47:pipe A] allocated
DPLL 1
<7> [168.353770] [drm:intel_reference_shared_dpll [i915]] using DPLL 1 for pipe
A
<7> [168.354965] [drm:hsw_audio_codec_disable [i915]] Disable audio codec on
pipe A
<7> [168.355410] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [168.357498] [drm:intel_disable_pipe [i915]] disabling pipe A
<7> [168.369023] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.378192] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.387279] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.396322] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.405507] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.414718] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.423782] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.432846] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.441935] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.451597] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.460326] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.468953] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.477546] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.486115] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.494642] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.503161] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.511653] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.520145] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.528626] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.537109] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.545594] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.554090] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.562565] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.571038] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.579509] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.587981] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.596457] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.604932] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.613401] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.621894] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.630364] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.638834] [drm:intel_dp_aux_xfer [i915]] dp_aux_ch timeout status
0x7c2003ff
<7> [168.638854] [drm:drm_dp_dpcd_access] Too many retries, giving up. First
error: -110
<7> [168.638893] [drm:intel_dp_sink_dpms [i915]] failed to disable sink power
state
<7> [168.638937] [drm:intel_power_well_disable [i915]] disabling DDI B IO power
well
<7> [168.639025] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
<7> [168.639097] [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active
1, on? 1) for crtc 47
<7> [168.639161] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1
<7> [168.639201] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DDI B]
<7> [168.639234] [drm:intel_atomic_commit_tail [i915]] [ENCODER:86:DP-MST A]
<7> [168.639261] [drm:intel_atomic_commit_tail [i915]] [ENCODER:87:DP-MST B]
<7> [168.639288] [drm:intel_atomic_commit_tail [i915]] [ENCODER:88:DP-MST C]
<7> [168.639315] [drm:intel_atomic_commit_tail [i915]] [ENCODER:98:DDI C]
<7> [168.639341] [drm:intel_atomic_commit_tail [i915]] [ENCODER:100:DP-MST A]
<7> [168.639368] [drm:intel_atomic_commit_tail [i915]] [ENCODER:101:DP-MST B]
<7> [168.639394] [drm:intel_atomic_commit_tail [i915]] [ENCODER:102:DP-MST C]
<7> [168.639424] [drm:verify_connector_state.isra.70 [i915]]
[CONNECTOR:85:DP-1]
<7> [168.639502] [drm:verify_single_dpll_state.isra.101 [i915]] DPLL 0
<7> [168.639549] [drm:verify_single_dpll_state.isra.101 [i915]] DPLL 1
<7> [168.639593] [drm:verify_single_dpll_state.isra.101 [i915]] DPLL 2
<7> [168.639638] [drm:verify_single_dpll_state.isra.101 [i915]] DPLL 3
<7> [168.639693] [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 1,
on? 0) for crtc 47
<7> [168.639731] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1
<7> [168.640022] [drm:intel_power_well_enable [i915]] enabling DDI C IO power
well
<7> [168.641185] [drm:lspcon_wait_mode [i915]] Current LSPCON mode PCON
<7> [168.641818] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value
06
<7> [168.642570] [drm:intel_dp_set_signal_levels [i915]] Using signal levels
00000000
<7> [168.642599] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
<7> [168.642627] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis
level 0
<7> [168.642655] [drm:intel_dp_program_link_training_pattern [i915]] Using DP
training pattern TPS1
<7> [168.647785] [drm:intel_dp_start_link_train [i915]] clock recovery OK
<7> [168.647815] [drm:intel_dp_program_link_training_pattern [i915]] Using DP
training pattern TPS3
<7> [168.653010] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP
Training successful
<7> [168.653369] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:99:DP-2]
Link Training Passed at Link Rate = 162000, Lane count = 2
<3> [168.659981] [drm:lspcon_write_infoframe [i915]] *ERROR* Parade FW not
ready to accept AVI IF
<7> [168.660074] [drm:lspcon_write_infoframe [i915]] LSPCON FW not ready, block
1
<7> [168.660108] [drm:lspcon_write_infoframe [i915]] Failed to write infoframe
blocks
<3> [168.660148] [drm:lspcon_write_infoframe [i915]] *ERROR* Failed to write
AVI infoframes
--
You are receiving this mail because:
You are the assignee for the bug.
You are the QA Contact for the bug.
You are on the CC list for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20190124/ce990614/attachment-0001.html>
More information about the intel-gfx-bugs
mailing list