[Bug 110818] New: [CI][BAT] igt at i915_selftest@live_mman - timeout - probe of 0000:00:02.0 failed with error
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Mon Jun 3 07:04:33 UTC 2019
https://bugs.freedesktop.org/show_bug.cgi?id=110818
Bug ID: 110818
Summary: [CI][BAT] igt at i915_selftest@live_mman - timeout -
probe of 0000:00:02.0 failed with error
Product: DRI
Version: DRI git
Hardware: Other
OS: All
Status: NEW
Severity: normal
Priority: medium
Component: DRM/Intel
Assignee: intel-gfx-bugs at lists.freedesktop.org
Reporter: lakshminarayana.vudum at intel.com
QA Contact: intel-gfx-bugs at lists.freedesktop.org
CC: intel-gfx-bugs at lists.freedesktop.org
https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6177/fi-apl-guc/igt@i915_selftest@live_mman.html
<6> [368.448397] [IGT] i915_selftest: executing
<6> [368.482603] [IGT] i915_selftest: starting subtest live_mman
<5> [368.648708] Setting dangerous option enable_guc - tainting kernel
<5> [368.648722] Setting dangerous option live_selftests - tainting kernel
<7> [368.716552] [drm:i915_driver_load [i915]] No PCH found.
<7> [368.716647] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB
<7> [368.716760] [drm:intel_uc_init_early [i915]] enable_guc=3 (submission:yes
huc:yes)
<6> [368.716765] [drm] Incompatible option detected: enable_guc=3, GuC
submission not supported!
<6> [368.716767] [drm] Switching to non-GuC submission mode!
<7> [368.716871] [drm:intel_uc_init_early [i915]] guc_log_level=5 (enabled:yes,
verbose:yes, verbosity:3)
<7> [368.717037] [drm:intel_power_domains_init [i915]] Allowed DC state mask 09
<6> [368.718119] [drm] Display disabled (module parameter)
<7> [368.718449] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [368.718550] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [368.718646] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
<6> [368.718680] i915 0000:00:02.0: vgaarb: deactivate vga console
<7> [368.719349] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED =
7ff00047
<7> [368.719456] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics
device: 65536K, usable: 64512K
<7> [368.720393] [drm:i915_driver_load [i915]] Initialized 3 GT workarounds
<7> [368.721127] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
<7> [368.721232] [drm:intel_opregion_setup [i915]] graphic opregion physical
addr: 0x79871018
<7> [368.721431] [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
<7> [368.721539] [drm:intel_opregion_setup [i915]] Public ACPI methods
supported
<7> [368.721642] [drm:intel_opregion_setup [i915]] ASLE supported
<7> [368.721832] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI
OpRegion (RVDA)
<7> [368.721937] [drm:i915_driver_load [i915]] CH1 DIMM size: 4 GB, width: X8,
ranks: 1, type: DDR3
<7> [368.722080] [drm:i915_driver_load [i915]] CH2 DIMM size: 4 GB, width: X8,
ranks: 1, type: DDR3
<7> [368.722171] [drm:i915_driver_load [i915]] DRAM bandwidth: 25600000 kBps,
channels: 2
<7> [368.722260] [drm:i915_driver_load [i915]] DRAM ranks: 1, 16Gb DIMMs: no
<7> [368.722364] [drm:intel_bios_init [i915]] Skipping VBT init due to disabled
display.
<7> [368.723341] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [368.723461] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [368.723741] [drm:intel_power_well_enable [i915]] enabling power well 1
<7> [368.723906] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 144000 kHz,
VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6
<7> [368.724092] [drm:intel_power_well_enable [i915]] enabling always-on
<7> [368.724182] [drm:intel_power_well_enable [i915]] enabling DC off
<7> [368.724271] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
<7> [368.724379] [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [368.724519] [drm:intel_power_well_enable [i915]] enabling dpio-common-a
<7> [368.724657] [drm:intel_power_well_enable [i915]] DDI PHY 1 already
enabled, won't reprogram it
<7> [368.724744] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
<7> [368.724909] [drm:intel_power_well_enable [i915]] DDI PHY 0 already
enabled, won't reprogram it
<7> [368.725136] [drm:intel_csr_ucode_init [i915]] Loading
i915/bxt_dmc_ver1_07.bin
<6> [368.726385] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin
(v1.7)
<7> [368.726829] [drm:__bxt_hpd_detection_setup [i915]] Invert bit setting:
hp_ctl:10001010 hp_port:38
<7> [368.727641] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<7> [368.727920] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7
(7.0 usec)
<7> [368.728074] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7
(7.0 usec)
<7> [368.728162] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8
(8.0 usec)
<7> [368.728248] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22
(22.0 usec)
<7> [368.728333] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22
(22.0 usec)
<7> [368.728418] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22
(22.0 usec)
<7> [368.728503] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22
(22.0 usec)
<7> [368.728587] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22
(22.0 usec)
<7> [368.728690] [drm:intel_modeset_init [i915]] 0 display pipe available.
<7> [368.728801] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 144000 kHz,
VCO 1152000 kHz, ref 19200 kHz, bypass 19200 kHz, voltage level 6
<7> [368.728904] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000
kHz
<7> [368.729074] [drm:intel_modeset_init [i915]] Max dotclock rate: 624000 kHz
<7> [368.729759] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL A hw state
readout: crtc_mask 0x00000000, on 0
<7> [368.729885] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL B hw state
readout: crtc_mask 0x00000000, on 0
<7> [368.730059] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL C hw state
readout: crtc_mask 0x00000000, on 0
<7> [368.732044] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch
i915/bxt_guc_32.0.3.bin
<7> [368.732150] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch PENDING
<7> [368.732709] [drm:intel_uc_fw_fetch [i915]] GuC fw size 176256 ptr
00000000f8e6cf02
<7> [368.732814] [drm:intel_uc_fw_fetch [i915]] GuC fw version 32.0 (wanted
32.0)
<7> [368.733560] [drm:intel_uc_fw_fetch [i915]] GuC fw fetch SUCCESS
<7> [368.733852] [drm:intel_uc_fw_fetch [i915]] HuC fw fetch
i915/bxt_huc_ver01_8_2893.bin
<7> [368.734022] [drm:intel_uc_fw_fetch [i915]] HuC fw fetch PENDING
<7> [368.734562] [drm:intel_uc_fw_fetch [i915]] HuC fw size 146880 ptr
0000000028cf1676
<7> [368.734676] [drm:intel_uc_fw_fetch [i915]] HuC fw version 1.8 (wanted 1.8)
<7> [368.735235] [drm:intel_uc_fw_fetch [i915]] HuC fw fetch SUCCESS
<7> [368.735524] [drm:intel_wopcm_init [i915]] Calculated GuC WOPCM Region:
[160KiB, 840KiB)
<7> [368.735803] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space:
[1000, fee00000]
<7> [368.737198] [drm:__intel_engine_init_ctx_wa [i915]] Initialized 13 context
workarounds
<7> [368.738652] [drm:i915_gem_contexts_init [i915]] logical context support
initialized
<7> [368.741712] [drm:intel_execlists_submission_init [i915]] Initialized 6
rcs0 workarounds
<7> [368.741842] [drm:intel_execlists_submission_init [i915]] Initialized 3
whitelist workarounds
<7> [368.745234] [drm:intel_init_gt_powersave [i915]] BIOS enabled RC states:
HW_CTRL off HW_RC6 off SW_TARGET_STATE 0
<7> [368.746843] [drm:intel_uc_fw_upload [i915]] HuC fw load
i915/bxt_huc_ver01_8_2893.bin
<7> [368.746952] [drm:intel_uc_fw_upload [i915]] HuC fw load PENDING
<7> [368.748133] [drm:huc_fw_xfer [i915]] HuC DMA transfer wait over with ret 0
<7> [368.748242] [drm:intel_uc_fw_upload [i915]] HuC fw load SUCCESS
<6> [368.748247] [drm] HuC: Loaded firmware i915/bxt_huc_ver01_8_2893.bin
(version 1.8)
<7> [368.748351] [drm:intel_guc_init_params [i915]] param[ 0] = 0x0
<7> [368.748449] [drm:intel_guc_init_params [i915]] param[ 1] = 0xdbfd3
<7> [368.748546] [drm:intel_guc_init_params [i915]] param[ 2] = 0x0
<7> [368.748644] [drm:intel_guc_init_params [i915]] param[ 3] = 0x4000
<7> [368.748741] [drm:intel_guc_init_params [i915]] param[ 4] = 0x3
<7> [368.748838] [drm:intel_guc_init_params [i915]] param[ 5] = 0x1dc
<7> [368.748941] [drm:intel_guc_init_params [i915]] param[ 6] = 0x0
<7> [368.749082] [drm:intel_guc_init_params [i915]] param[ 7] = 0x0
<7> [368.749182] [drm:intel_guc_init_params [i915]] param[ 8] = 0x0
<7> [368.749282] [drm:intel_guc_init_params [i915]] param[ 9] = 0x0
<7> [368.749383] [drm:intel_guc_init_params [i915]] param[10] = 0x0
<7> [368.749482] [drm:intel_guc_init_params [i915]] param[11] = 0x0
<7> [368.749581] [drm:intel_guc_init_params [i915]] param[12] = 0x0
<7> [368.749680] [drm:intel_guc_init_params [i915]] param[13] = 0x0
<7> [368.749804] [drm:intel_uc_fw_upload [i915]] GuC fw load
i915/bxt_guc_32.0.3.bin
<7> [368.749902] [drm:intel_uc_fw_upload [i915]] GuC fw load PENDING
<7> [368.761146] [drm:guc_fw_xfer [i915]] GuC status 0x8002f0ec
<7> [368.761254] [drm:intel_uc_fw_upload [i915]] GuC fw load SUCCESS
<6> [368.761259] [drm] GuC: Loaded firmware i915/bxt_guc_32.0.3.bin (version
32.0)
<6> [368.762267] i915 0000:00:02.0: GuC firmware version 32.0
<6> [368.762274] i915 0000:00:02.0: GuC submission disabled
<6> [368.762278] i915 0000:00:02.0: HuC enabled
<6> [368.778407] [drm] Initialized i915 1.6.0 20190524 for 0000:00:02.0 on
minor 0
<7> [368.780838] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
<7> [368.781016] [drm:intel_power_well_disable [i915]] disabling dpio-common-a
<7> [368.781121] [drm:intel_power_well_disable [i915]] disabling power well 2
<7> [368.781357] [drm:intel_power_well_disable [i915]] disabling DC off
<7> [368.781461] [drm:gen9_enable_dc5 [i915]] Enabling DC5
<7> [368.781552] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 01
<7> [368.782226] [drm:intel_power_well_disable [i915]] disabling always-on
<7> [368.782690] i915 device info: pciid=0x5a85 rev=0x0b platform=BROXTON
(subplatform=0x0) gen=9
<7> [368.782695] i915 device info: is_mobile: no
<7> [368.782698] i915 device info: is_lp: yes
<7> [368.782702] i915 device info: require_force_probe: no
<7> [368.782705] i915 device info: has_64bit_reloc: yes
<7> [368.782708] i915 device info: gpu_reset_clobbers_display: no
<7> [368.782712] i915 device info: has_reset_engine: yes
<7> [368.782715] i915 device info: has_fpga_dbg: yes
<7> [368.782718] i915 device info: has_guc: yes
<7> [368.782722] i915 device info: has_guc_ct: no
<7> [368.782725] i915 device info: has_l3_dpf: no
<7> [368.782728] i915 device info: has_llc: no
<7> [368.782731] i915 device info: has_logical_ring_contexts: yes
<7> [368.782735] i915 device info: has_logical_ring_elsq: no
<7> [368.782738] i915 device info: has_logical_ring_preemption: yes
<7> [368.782741] i915 device info: has_pooled_eu: no
<7> [368.782745] i915 device info: has_rc6: yes
<7> [368.782748] i915 device info: has_rc6p: no
<7> [368.782751] i915 device info: has_rps: yes
<7> [368.782755] i915 device info: has_runtime_pm: yes
<7> [368.782758] i915 device info: has_snoop: yes
<7> [368.782761] i915 device info: has_coherent_ggtt: no
<7> [368.782764] i915 device info: unfenced_needs_alignment: no
<7> [368.782768] i915 device info: hws_needs_physical: no
<7> [368.782771] i915 device info: cursor_needs_physical: no
<7> [368.782774] i915 device info: has_csr: yes
<7> [368.782778] i915 device info: has_ddi: yes
<7> [368.782781] i915 device info: has_dp_mst: yes
<7> [368.782784] i915 device info: has_fbc: yes
<7> [368.782787] i915 device info: has_gmch: no
<7> [368.782791] i915 device info: has_hotplug: yes
<7> [368.782794] i915 device info: has_ipc: yes
<7> [368.782797] i915 device info: has_overlay: no
<7> [368.782800] i915 device info: has_psr: yes
<7> [368.782804] i915 device info: overlay_needs_physical: no
<7> [368.782807] i915 device info: supports_tv: no
<7> [368.782811] i915 device info: slice total: 1, mask=0001
<7> [368.782814] i915 device info: subslice total: 2
<7> [368.782818] i915 device info: slice0: 2 subslices, mask=0006
<7> [368.782822] i915 device info: EU total: 12
<7> [368.782825] i915 device info: EU per subslice: 6
<7> [368.782828] i915 device info: has slice power gating: no
<7> [368.782832] i915 device info: has subslice power gating: yes
<7> [368.782835] i915 device info: has EU power gating: yes
<7> [368.782838] i915 device info: CS timestamp frequency: 19200 kHz
<6> [368.782841] [drm] DRM_I915_DEBUG enabled
<6> [368.782844] [drm] DRM_I915_DEBUG_GEM enabled
<6> [368.782847] [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<6> [368.782855] i915: Performing live selftests with st_random_seed=0x6e04b63f
st_timeout=1000
<6> [368.782892] i915: Running mman
<6> [368.782922] i915: Running i915_gem_mman_live_selftests/igt_partial_tiling
<7> [508.627736] check_partial_mapping: timed out before tiling=1 stride=261632
<7> [508.627744] check_partial_mapping: timed out before tiling=2 stride=262144
<7> [508.628061] [drm:intel_power_well_enable [i915]] enabling always-on
<7> [508.628155] [drm:intel_power_well_enable [i915]] enabling DC off
<7> [508.628393] [drm:gen9_set_dc_state [i915]] Setting DC state from 01 to 00
<7> [508.628502] [drm:intel_power_well_enable [i915]] enabling power well 2
<7> [508.628604] [drm:intel_power_well_enable [i915]] enabling dpio-common-a
<7> [508.629527] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
<4> [509.129757] i915: probe of 0000:00:02.0 failed with error -4
--
You are receiving this mail because:
You are on the CC list for the bug.
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20190603/3243cb9a/attachment-0001.html>
More information about the intel-gfx-bugs
mailing list