[Bug 112296] Kernel 5.3.11 display corruption after "(EE) intel(0): Failed to submit rendering commands (Invalid argument), disabling acceleration" on Dell Precision 5540

bugzilla-daemon at freedesktop.org bugzilla-daemon at freedesktop.org
Wed Nov 20 07:21:59 UTC 2019


https://bugs.freedesktop.org/show_bug.cgi?id=112296

Arcadiy Ivanov <arcadiy at ivanov.biz> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         Resolution|---                         |FIXED
             Status|REOPENED                    |RESOLVED

--- Comment #18 from Arcadiy Ivanov <arcadiy at ivanov.biz> ---
Nevermind, I'm a moron, the built drivers went into the wrong prefix. So far so
good, I'll reopen if the bug pops up again.

    12.086] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[    12.088] (II) Module intel: vendor="X.Org Foundation"
[    12.089] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
[    12.089] (II) intel: Driver for Intel(R) HD Graphics
[    12.089] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    12.089] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    12.090] (II) intel(0): Using Kernel Mode Setting driver: i915, version
1.6.0 20190619
[    12.090] (II) intel(0): SNA compiled from 2.99.917-896-ge628d226
[    12.092] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[    12.092] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2,
avx, avx2; using a maximum of 8 threads
[    12.092] (II) intel(0): Creating default Display subsection in Screen
section
[    12.092] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    12.092] (==) intel(0): RGB weight 888
[    12.092] (==) intel(0): Default visual is TrueColor
[    12.092] (II) Applying OutputClass "intel" options to /dev/dri/card0
[    12.092] (II) Applying OutputClass "intel" options to /dev/dri/card0
[    12.092] (**) intel(0): Option "AccelMethod" "sna"
[    12.092] (**) intel(0): Option "DRI" "3"
[    12.092] (**) intel(0): Option "TearFree" "true"
[    12.093] (II) intel(0): Output eDP1 has no monitor section
[    12.093] (**) intel(0): Found backlight control interface intel_backlight
(type 'raw') for output eDP1
[    12.093] (II) intel(0): Enabled output eDP1
[    12.093] (II) intel(0): Output DP1 has no monitor section
[    12.093] (II) intel(0): Enabled output DP1
[    12.093] (II) intel(0): Output DP2 has no monitor section
[    12.093] (II) intel(0): Enabled output DP2
[    12.093] (II) intel(0): Output DP3 has no monitor section
[    12.093] (II) intel(0): Enabled output DP3
[    12.093] (II) intel(0): Output DP1-1 has no monitor section
[    12.093] (II) intel(0): Enabled output DP1-1
[    12.093] (II) intel(0): Output DP1-2 has no monitor section
[    12.093] (II) intel(0): Enabled output DP1-2
[    12.093] (II) intel(0): Output DP1-3 has no monitor section
[    12.093] (II) intel(0): Enabled output DP1-3
[    12.093] (--) intel(0): Using a maximum size of 256x256 for hardware
cursors
[    12.093] (II) intel(0): Output VIRTUAL1 has no monitor section
[    12.093] (II) intel(0): Enabled output VIRTUAL1
[    12.093] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[    12.093] (--) intel(0): Output DP2 using initial mode 1920x1080 on pipe 1
[    12.093] (--) intel(0): Output DP1-1 using initial mode 1920x1080 on pipe 2
[    12.094] (**) intel(0): TearFree enabled
[    12.094] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    12.094] (==) intel(0): DPI set to (96, 96)
[    12.096] (II) intel(0): SNA initialized with Coffeelake (gen9) backend
[    12.096] (==) intel(0): Backing store enabled
[    12.096] (==) intel(0): Silken mouse enabled
[    12.096] (II) intel(0): HW Cursor enabled
[    12.097] (==) intel(0): DPMS enabled
[    12.097] (==) intel(0): Display hotplug detection enabled
[    12.097] (II) intel(0): [DRI2] Setup complete
[    12.097] (II) intel(0): [DRI2]   DRI driver: i965
[    12.097] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    12.097] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    12.097] (II) intel(0): hardware support for Present enabled
[    12.119] (II) intel(0): switch to mode 1920x1080 at 60.0 on eDP1 using pipe 0,
position (0, 0), rotation normal, reflection none
[    12.122] (II) intel(0): switch to mode 1920x1080 at 60.0 on DP2 using pipe 1,
position (0, 0), rotation normal, reflection none
[    12.133] (II) intel(0): switch to mode 1920x1080 at 60.0 on DP1-1 using pipe
2, position (0, 0), rotation normal, reflection none
[    12.142] (II) intel(0): Setting screen physical size to 508 x 285
[    14.099] (II) intel(0): EDID vendor "SHP", prod id 5306
[    14.099] (II) intel(0): Printing DDC gathered Modelines:
[    14.099] (II) intel(0): Modeline "1920x1080"x0.0  142.52  1920 1968 2000
2080  1080 1083 1088 1142 -hsync -vsync (68.5 kHz eP)
[   329.172] (II) intel(0): resizing framebuffer to 6826x3840
[   329.248] (II) intel(0): switch to mode 1920x1080 at 60.0 on eDP1 using pipe 0,
position (2986, 2160), rotation normal, reflection none
[   329.307] (II) intel(0): switch to mode 3840x2160 at 60.0 on DP1-1 using pipe
2, position (0, 0), rotation right, reflection none
[   331.817] (II) intel(0): switch to mode 3840x2160 at 60.0 on DP2 using pipe 1,
position (2986, 0), rotation normal, reflection none

-- 
You are receiving this mail because:
You are on the CC list for the bug.
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20191120/5e413e5c/attachment.html>


More information about the intel-gfx-bugs mailing list